Error connecting from Vista to Server

Hi to All,
I don't sure that this is the correct forum for my question.
I have this "scenario"
1) My app is on Win Server 2003 R2 (with Domain)
2) Many clients works fine with a link like this:
http://server01.sede.mySite.it:7778/forms90/f90servlet?config=myApp
3) I have installed under the Domain a Vista Ultimate PC and it work correctly
4) But if I run the previous link, Vista display a message error "no Internet connection" and close the Browser. Obviously, I have tested the Internet connection on Vista and it works fine.
Have You an Idea ?
Thank You and Best Regards.
Gaetano
Message was edited by:
NICK048

as I see in your URL, you work with Forms 9i. That's much too old. Please try a Forms 10g Rel. 2 Installation.
And have a look on metalink, if Vista is certified with this AS

Similar Messages

There was an error connecting to the update server.

There was an error connecting to the update server. Check your network settings and try again.
am i along with this?
airport utility 5.4.2 can`t get a new update 7.4.2

Ok. Got it fixed.
For a real fix:
Try trashing the ~/Library/Application Support/Apple/AirPort folder. This should solve the problem this time and next time.
If you are reluctant to do that, log into your 'test' account. (You do have a test account, don't you?)
Do the update from there.
Apparently we have something corrupted in our support directories for the AirPort device.
I first fixed my problem by doing the alternate log in method and found that all 3 of my devices were needing a firmware update but only the Capsule was reporting an update within my own account.

HT1339 i cant log into instagram fro my ipod it says error & connection to log in server is in error. i deleted & installed the app again. it still wont allow me to log in what can i do ?

i cant log into instagram fro my ipod it says error & connection to log in server is in error. i deleted & installed the app again. it still wont allow me to log in what can i do ?

iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

All Site Replication connection from particular one Server

Hi,
I have AD structure with multiple Site. All site have one Domain Controller. But KCC automatically create
connection from one particular server (DC) for all site DC.
Example : I have 5 Site and 5 DC. Each DC belongs to each site. I check all DC create "automatically generated"
connection from DC5 only. I don't want to create manual replication connection. I want kcc is generated connection from different server ( from DC2).
It is possible ?

Each DC belongs to a specific site?
To have KCC make 'smart' connections, the easiest and preffered way is to define site links and define an appropriate cost to them. http://technet.microsoft.com/en-us/library/cc794882%28v=ws.10%29.aspx KCC
will use the connection with lowest cost that is available to create a replication connection.
If you have multiple dc's in one site, you can make the dc that has to handle replication 'preferred bridgehead' http://technet.microsoft.com/en-us/library/cc776937(v=ws.10).aspx
Note it is indeed best practice not to create manual replication connections, but to have KCC handle it. That will ensure that if network downtime occurs on an important link, KCC can 'failover' to other connections while maintaining consistency.
MCP/MCSA/MCTS/MCITP

Error: Connect from SAP gateway to RFC Server failed

Hi
I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
Please kindly help.
Erro: Connect from SAP gateway to RFC server failed.
Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
LOCATION SAP-Gateway on host hostname / sapgw03
ERROR timeout during allocate
TIME Wed Oct 31 05:31:45 2007
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1795
DETAIL no connect of TP sapdp03 from host hostname after 22 sec
COUNTER 3

Hi K Patil,
Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
to make this work you have to make entry in the SLD of your server
fort that plesae acess this link.
Re: JCo connection Error
Re: wt is SLD.. how to do configure it
Please Reward Points if Helpfull.
Regards
Vinit
Edited by: Vinit Soni on Dec 19, 2007 7:20 AM

VM Agent Error connecting from VM Manager

Hi everybody.
I'm stucked with an error. This error is everytimes the same and after many tests I have not found anything to resolve it.
The thing:
- First, the installation of Oracle VM Server was successfully (v2.1.1). The log review did not revealed any problem, the VM Agent was running ok, and responding to the local testing:
# /opt/ovs-agen*/utils/do_rpc.py https://admin:password@localhost:8899 echo hola
echo ['hola']
=> success:echo=hola
- Second, the installation of Oracle VM Manager was successfully (v2.1.1). It has been installed in other machine (64bit) over Oracle LE5. The service oc4j is running ok and I can access to the Web Console through https://hostname:8888/OVS. No problem.
The problem starts trying to create a Server Pool. Filling the screen Server Information with the following info:
Server Host/IP: 192.168.33.119:8899
Server Name: oraclevm
Agent Password: ****** (the password belonging to the admin agent, which is clear at the agent.ini file)
Server Type: Marked the options: Server Pool Master and Virtual Machine Server
I click on the Test Connection button and shows: Information: Server agent is active.
However, the /var/log/ovm-manager/oc4j.log shows:
ERROR Agent connection error!
Ignoring this error, clicking on the Add button shows:
Error: An error occurred while creating a new XmlRpcClient object. Try again later or contact the system administrator.
The oc4j.log show the following:
2008-05-27 12:49:29.199 ERROR Agent connection error!
[TopLink Finer]: 2008.05.27 12:49:29.200--ServerSession(1392667)--Thread(Thread[HTTPThreadGroup-7,5,HTTPThreadGroup])--client acquired
[TopLink Fine]: 2008.05.27 12:49:29.220--ServerSession(1392667)--Connection(24430720)--Thread(Thread[HTTPThreadGroup-7,5,HTTPThreadGroup])--SELECT SERVER_ID, MEM_FREE, HD_AMOUNT, HD_FREE, COMMENTS, IP, STATUS, ARCHITECTURE, SERVER_TYPE, MEM_AMOUNT, VT_TYPE, SERVER_NAME, TIME, CPU_NUM, LOGIN_PASSWD, LOCATION, LOGIN_USERNAME, SUPPORTHVM, PLATFORM, SITE_ID FROM OVS_SERVER
[TopLink Finer]: 2008.05.27 12:49:29.222--ClientSession(1777337)--Thread(Thread[HTTPThreadGroup-7,5,HTTPThreadGroup])--client released
[TopLink Finer]: 2008.05.27 12:49:29.222--ServerSession(1392667)--Thread(Thread[HTTPThreadGroup-7,5,HTTPThreadGroup])--acquire unit of work: 8273986
[TopLink Finer]: 2008.05.27 12:49:29.222--UnitOfWork(8273986)--Thread(Thread[HTTPThreadGroup-7,5,HTTPThreadGroup])--release unit of work
2008-05-27 12:49:29.223 ERROR Agent connection error!
So, they are the same errors connecting with the agent.
And far away, clicking on the Next button:
Error: No servers will be added to the server pool.
And the same connection errors with the agent.
I've tried to configure the agent:
# service ovs-agent configure
setting the rules:
allow=*
deny=
and of course I have the firewall stopped:
# service iptables stop
# service iptables status
Firewall is stopped.
Also I've trying stopping the agent, disabling SSL y starting again. No changes.
The same error again and again.
I've trying a lot of things but any didn't work.
Any help will be very welcomed.
Thanks in advance.
Angel

Hi again.
By the moment I've not advanced with this error.
Anyway I've achieved successfully the installation of a paravirtualized Oracle EL5 Linux system directly at the server with the virt-install command. It works nice by now.
Related to the Manager, and looking at the error "An error occurred while creating a new XmlRpcClient object", I think I miss something for the XML-RCP protocol.
Maybe a package, a library? A path, permits? I don't know.
Please, if any expert could give me a clue...
Thanks in advance.
Angel

Error=49 from the LDAP server for GSSAPI Kerberos authentication

I am trying to find solution for ldapsearch failure with GSSAPI Kerberos authentication . I am running Sun Directory Server 5.2 P4 on a Solaris-9 sparc machine..
Steps :
bash-2.05# kinit tester1
Password for [email protected]:
bash-2.05#
When I do ldapsearch , I am getting following logs on the server :
tail -f /var/Sun/mps/slapd-bf1r-dsun-1/logs/access
[22/Feb/2007:01:44:16 -0700] conn=32 op=-1 msgId=-1 - fd=26 slot=26 LDAP connection from 10.7.30.185 to 10.7.30.16
[22/Feb/2007:01:44:16 -0700] conn=32 op=0 msgId=1 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=0 msgId=1 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:44:16 -0700] conn=32 op=1 msgId=2 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=1 msgId=2 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:44:16 -0700] conn=32 op=2 msgId=3 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:44:16 -0700] conn=32 op=2 msgId=3 - RESULT err=49 tag=97 nentries=0 etime=0
[22/Feb/2007:01:44:16 -0700] conn=32 op=3 msgId=4 - UNBIND
[22/Feb/2007:01:44:16 -0700] conn=32 op=3 msgId=-1 - closing - U1
[22/Feb/2007:01:44:17 -0700] conn=32 op=-1 msgId=-1 - closed.
[22/Feb/2007:01:45:50 -0700] conn=33 op=-1 msgId=-1 - fd=26 slot=26 LDAP connection from 10.7.30.185 to 10.7.30.16
[22/Feb/2007:01:45:50 -0700] conn=33 op=0 msgId=1 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=0 msgId=1 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:45:50 -0700] conn=33 op=1 msgId=2 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=1 msgId=2 - RESULT err=14 tag=97 nentries=0 etime=0, SASL bind in progress
[22/Feb/2007:01:45:50 -0700] conn=33 op=2 msgId=3 - BIND dn="uid=tester1,ou=people,dc=test1,dc=com" method=sasl version=3 mech=GSSAPI
[22/Feb/2007:01:45:50 -0700] conn=33 op=2 msgId=3 - RESULT err=49 tag=97 nentries=0 etime=0
[22/Feb/2007:01:45:50 -0700] conn=33 op=3 msgId=4 - UNBIND
[22/Feb/2007:01:45:50 -0700] conn=33 op=3 msgId=-1 - closing - U1
[22/Feb/2007:01:45:51 -0700] conn=33 op=-1 msgId=-1 - closed.
I am using default Identiy Mapping and the ldif file looks like this :
dn: cn=default,cn=GSSAPI,cn=identity mapping,cn=config
objectClass: dsIdentityMapping
objectClass: nsContainer
objectClass: dsPatternMatching
objectClass: top
cn: default
dsMatching-pattern: ${Principal}
creatorsName: cn=directory manager
createTimestamp: 20070220045812Z
dsMatching-regexp: uid=(.*)
dsSearchBaseDN: ou=people,dc=test1,dc=com
dsMappedDN: uid=${Principal},ou=people,dc=test1,dc=com
modifiersName: uid=admin,ou=administrators,ou=topologymanagement,o=netscaperoo
t
modifyTimestamp: 20070221082740Z
Following is the snoop for LDAP on the server :
bash-2.05# !snoop
snoop -v port 389 | grep LDAP
Using device /dev/eri (promiscuous mode)
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP: [OctetString]
LDAP: *** NOT PRINTED - Too long value ***
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: SASL Bind In Progress
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL Credentials [7]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: SASL Bind In Progress
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL Credentials [7]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 0: Bind Request]
LDAP: [Version]
LDAP: [Object Name]
LDAP: uid=tester1,ou=people,dc=test1,d
LDAP: c=com
LDAP: Authentication: SASL *[3]
LDAP: [OctetString]
LDAP: GSSAPI
LDAP: [OctetString]
LDAP:
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation *[APPL 1: Bind Response]
LDAP: [Result Code]
LDAP: 1
LDAP: Invalid Credentials
LDAP: [Matched DN]
LDAP: [Error Message]
LDAP: SASL(-1): generic failure:
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- Lightweight Directory Access Protocol Header -----
LDAP: *[LDAPMessage]
LDAP: [Message ID]
LDAP: Operation [APPL 2: Unbind Request]
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
TCP: Destination port = 389 (LDAP)
LDAP: ----- LDAP: -----
LDAP:
LDAP: ""
LDAP:
Please help me on how to fix this issue.
Thanks,
Radhakrishnan

I did reply on the other thread of yours...
Ludovic

Error connecting from Tuxedo ws (vsn 6.4)

The server appears to start normally however we receive the following error when
attempting to connect from ws:
Error Message:
ERROR-FPA tpinit failed - tuxedo tperror 12 - NLS:4: Cannot open message
catalog LIBWSC_CAT, set 1, num 1142; check TUXDIR=.,
LANG=English_australia,1252
Anyone had something similar and if so what was the solution...all comments welcome.

Set your env. variables TUXDIR to your tuxedo installation directory and
LANG to C ( or rename the folder C to English_australia , you can find this
folder in TUXDIR/locale folder). After that you will get a proper hint in
the ULOG file !!
BTW. I searched e-docs.bea.com for message LIBWSC:1142, but strangely ther
is no entry for this messaged id !!!!
tuhin
"John Haunton" <[email protected]> wrote in message
news:3c43cd38$[email protected]..
>
The server appears to start normally however we receive the followingerror when
attempting to connect from ws:
Error Message:
ERROR-FPA tpinit failed - tuxedo tperror 12 - NLS:4: Cannot open message
catalog LIBWSC_CAT, set 1, num 1142; check TUXDIR=.,
LANG=English_australia,1252
Anyone had something similar and if so what was the solution...allcomments welcome.

Error connecting from Mac to Linux via SSH (Permission denied (publickey...

Hello together,
I have a perfectly working setup with my XP machine, Putty and my Suse Linux server that allow for remote login via SSH. I use Public Key authentication.
However, when I try to login from my Mac, all I get from the Mac side is a
"Permission denied (publickey,keyboard-interactive)."
And I can't establish the connection. On the server in 'messages' I get:
"sshd{6046}: Accepted publickey for {userName} from {myHomeIP} port 38335 ssh2"
What could be wrong here?
I would like to use the same keys on my PC and my Mac so I just copied the key files into the .ssh directory on the Mac, did a chmod 600 on them and then tried to remote log-on with the follwoing from the terminal:
"ssh -l {userName} {host} -i {keyFile}"
My questions are:
1) How am I sure that the Mac uses the right key files? (or uses them at all)
2) How come my server says "accept publickey" and no connection is established?
3) Do you have any other idea on how I might get this to work? What I need is a method to copy files (not via FTP) to my server and let the process run without supervision / user interaction.
Thanks a lot for all your help!
Cheers
Message was edited by: Sebastian_R (some typos)

If you copied your files from Windows, I would check to make sure your lines are <LF> terminated. I have not played with Putty so I do not know the way it line terminates its ssh key files, but Windows has a long tradition of using <CR><LF> to terminate its lines.
cat -v ~/.ssh/id_rsa # or whatever your file names are
If there are <CR> characters in the file, they will show up as ^M
Next get more diagnostic information from ssh using an *ssh -v -v -v*
If you know how to tell Putty to do the same thing, do it from Putty as well.
Now compare the debug output from the working vs the non-working ssh commands. The differences will tell you a lot.
If you look at *man ssh* and search for permissions it will tell you what files need restrictive permissions. You can get a permissions denied error if your home directory allows Group or Other write access. The $HOME/.ssh directory needs to be set so ONLY the Owner is allowed to access it. And some of the files in $HOME/.ssh require specific permissions. The ssh man page details this.

Error Publishing from iweb 09 - Server or iweb problems??

I upgraded from iweb 08 (I had no issues) to iweb 09, and I have publishing errors more than half the time. Are the mobileme servers having problems, or is there a hack in the iweb software?
This is a big problem because I have 20 Gb of pages with video that I need to re-publish. It is bad enough that I will be tying my network up for 2 weeks, but that I often don't make progress.
The message is "Error connecting to mobileme, check network.. .." The problem is that it uploads for an hour or so before it stops.. I am double checking to see if my routing is causing the problem, but I don't think so..
Is Apple working on this? Are there numerous people who are now stuck re-publishing their sites and the servers are getting beat up? Does anyone know how to diagnose this type of problem?

Finally i solved the issue of Publishing Error in iWeb 09 with MobileMe.
Procedure which i followed and might also help you guys.
Lets say your default site name is XYZ then create a new site e.g. ABC.
Thereafter dragged all pages from default site XYZ to new site ABC ONE BY ONE.
*In the preference folder delete any PLIST files related to iWeb (i had two files in my folder).*
*Once you drag all pages from your default site to new site there after just make a new blank page and publish the site.*
Then start dragging first one page from new site ABC and publish one page. There after repeat all pages one by one and publish after every page you drag from new site ABC to default site XYZ.
Once you finish then take a backup in time machine of the domain.
There after start your blog page then publish again then start photos album page, publish again then your movie page, publish again etc because these are the pages which were mostly creating errors.
After you complete the final page and publish remove the blank page and publish again.
I spent 3 days with the same problem and finally i could finish by this method in few hours.

Connection from the web server to the database which is situated in another machine.

Thanks for the reply.
I need to know, whether there shold be a physical connection between the web server and database machine? or can we connect to the database machine through the web, if the database machine has a domain name? if there is a physical connection, we can use the jdbc/odbc connection. but if we are connecting through the web, how can I estblish the connection using a JDBC/ ODBC connection?
Regards,
George

As long as there's a network connection between the two machines, you should be able to make the connection. I'm not sure what the difference between a 'direct connection' and a 'connection through the web' is-- are you actually running a network cable from one machine to another?
When you cannot make the connection, are you able to do a 'tnsping' on the target database?
When you say 'connecting through the web', is it possible that you're going through a firewall? If so, the firewall may be blocking the ports you need to communicate on.
Justin Cave
ODBC Development

Network Error: Error connecting to Essbase Studio server

Hi......I am able to login to almost all the apps (shared services, Web Analysis, FIR, Web Services etc) except EssBase Studio. When i try to login to essbase studio it says "error connecting essbase studio server"
with detailed error "Network communication with the server failed. Check your network connection and try again.
Connection refused: connect"
Any idea?

here is the log file
0000JeIWmdLDwW05zzWByW1GXwyc000000,0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: <init>] Failed to load driver for netezza.
[2012-10-24T16:54:50.218+05:30] [hyperion] [ERROR] [ESSSTD-145015] [com.hyperion.cp.driver] [] [nwaddr: 10.0.2.15] [tid: 10] [userId: system] [ecid: 0000JeIWmdLDwW05zzWByW1GXwyc000000,0] [SRC_CLASS: com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection] [SRC_METHOD: createSQLConnection] Unable to establish connection to Oracle server.
[2012-10-24T16:54:50.369+05:30] [hyperion] [ERROR] [ESSSTD-145015] [com.hyperion.cp.driver] [] [nwaddr: 10.0.2.15] [tid: 10] [userId: system] [ecid: 0000JeIWmdLDwW05zzWByW1GXwyc000000,0] [SRC_CLASS: com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection] [SRC_METHOD: createSQLConnection] Unable to establish connection to Oracle server.
[2012-10-24T16:54:50.369+05:30] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [] [nwaddr: 10.0.2.15] [tid: 10] [userId: system] [ecid: 0000JeIWmdLDwW05zzWByW1GXwyc000000,0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage=Cannot initialize catalog storage. Make sure the server.properties file contains the correct information.[[
com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine.
     at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:78)
     at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:104)
     at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:194)
     at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:81)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)
     at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1318)
     at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:184)
     at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:130)
     at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:209)
     at com.hyperion.cp.server.ServerMain.main(ServerMain.java:289)
Caused by: com.hyperion.cp.driver.util.DriverConnectionException: Cannot establish connection to Oracle server.
     at com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection.createSQLConnection(OracleConnection.java:283)
     at com.hyperion.cp.driver.adapters.sql.SQLConnection$ConnectionPool.<init>(SQLConnection.java:1226)
     at com.hyperion.cp.driver.adapters.sql.SQLConnection.construct(SQLConnection.java:450)
     at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:112)
     at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
     at com.hyperion.cp.server.QueueableTask.setMetadataConnection(QueueableTask.java:53)
     at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:61)
     ... 11 more
Caused by: java.sql.SQLRecoverableException: ORA-01033: ORACLE initialization or shutdown in progress
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:397)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)
     at oracle.jdbc.driver.T4CTTIoauthenticate.processError(T4CTTIoauthenticate.java:448)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
     at oracle.jdbc.driver.T4CTTIoauthenticate.doOSESSKEY(T4CTTIoauthenticate.java:409)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:395)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:678)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:238)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
     at java.sql.DriverManager.getConnection(DriverManager.java:582)
     at java.sql.DriverManager.getConnection(DriverManager.java:154)
     at com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection.createSQLConnection(OracleConnection.java:273)
     ... 17 more
]]

Error connecting to a Baan server

Hi all,
I have this error when connecting to a Baan server:
"Failed to communicate with the driver worker process. The server may have terminated unexpectedly"
The client machine runs Windows XP SP3 with all the latest patches installed, Crystal Reports XI R2 SP6, Baan driver ("Integration kit for Baan") and the Baan server is Baan IV.
Is there anyone out there with an idea of what's wrong here?
Kind regards,
Frank Domnick

Well, getting no answer at all is not really helpfull
In the meantime I have done further investigations on this issue and I have found that there is obviously a problem with permissions: If a user with administrative permissions logs on to Windows and then starts CR everything is OK, but a user with just simple user permissions gets the error as stated.
As I cannot grant admin permissions to anyone I'd be greatful for a workaround.
Kind regards,
FraDom

Import Error: Connecting to Dynamic Link Server Failed

Just tried to import file sinto a brand new LR Catalog when I got this message...here's the entire error message:
"An unknown error has occurred while reading the video file. Connecting to Dynamic Link server failed. (98)"
Connecting to Dynamic Link Server Failed
this was then followed by a list of files of these types:
.mov
.m4v
.3gp

I've read several threads about this problem (because I had it myself) and what worked was closing Lightroom, uninstalling Quicktime, restart Lightroom, ignore the "you have to have quicktime" message, and import the videos. Then I reinstalled Quicktime.
But, I think the problem isn't quicktime itself; I think it's something to do with iTunes. During Quicktime uninstallation, it said that iTunes was open. I disagreed, but Task Manager showed the process still running. I had to kill it manually to complete the uninstall.
So, just a thought, maybe check to be sure iTunes isn't running before trying the Lightroom import? One never knows....

Errors connecting from windows

i try and connect from windows and it gives me this:
[2006/10/24 21:39:25, 0] pdbods.c:odssamgetsampwnam(2327)
odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'XXXX'!
funny thing is, if i connect using ADMIN and enter propper password, it works fine
it seems windows is trying to autofill the username (that is logged into windows) in the XXX field, and it doesn't match the server's account name.
thanks in advance!!

We're having something similar to this where Entourage users are apparently handing off the incorrect user name and password and thereby disabling their Apple user account on our mail/webmail OSX server.
I don't know how to stop the accounts from being disabled, nor do I know when the user has been automatically disabled by the server. We only know when the customer contacts us (which can't be by email).
This has already cost us some accounts and business.
Users who are not Windows or who are not using Entourage are having no problem. Since the problem also happens with Mac Entourage users, it may have more to do with Entourage than Windows.
Anyone know how to set the authentification of OSX or Entourage to be more friendly?

Error connecting from Vista to Server

Similar Messages

Maybe you are looking for