Error Connecting Gateway from ECC

Hi All,
We are trying to configure connection from ECC to Gateway but getting following error. I have having SAP ALL access:
No authorization to log via a trusted system (L-RC =0 T-RC=2).
Please advice on this..
Regards
Rajesh

Hi Rajesh,
Yes, As suggested Derek in the target system must have Auth S_RFCACL.
Thanks,
Syam

Similar Messages

Connecting directly from ECC 6.0 to a 3rd party system with out XI ?

Hi Guys,
we have developed soap-soap scenarios in XI and we are sending the data from ECC 6.0 -> XI ->3rd party webbased system.
Due to some security reasons we are looking for options of doing the same with out XI ie directly from ECC 6.0 to 3rd party system.
can somebody explain or provide the links for doing the direct connection and also suggest the advantages and disadvantages of eliminating XI completly from the design
any hep would be really appreciated
Thanks,
Srini

HI,
Yes, using standard Enterprise services from SAP you can communicate with 3rd party systems also,
Even you can configure the HTTPS communication with R/3 to 3rd Party system. For this you need to install the client Certificates and have to use valid User ID and Passwords.
http://help.sap.com/saphelp_nw04s/helpdata/en/3a/7cddde33ff05cae10000000a128c20/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e8/1f1041a0f6f16fe10000000a1550b0/frameset.htm
Disadvantage of communication without XI
1. XI provides the re-usability concept. i.e. if you have just R/3 to 3rd party and tomorrow you may need to add another 3rd party or sap system to communicate, then you just re-use the existing scenario.
But in case of direct communication is leads to point-to-point connection.
2. R/3 can't directly support to the open Standards, either you have to use ABAP proxies or RFCs to convert it to XML format. But XI is an Centralized Integration Platform with Open Standard. In current world, Openness is important.
3. XI has the Ability to communicate with other messaging systems/products may be JMS or any other 3rd party systems also which has the limitations with direct communication
4. Complex processes for communication possible instead of only sending and receiving (business process management) (connect e.g. asynchronous and synchronous steps, define complex communication scenarios)
Mapping etc possible to accomplish in Java. Platform independent Java components.
5. XI has Java & .Net support. which is not possible with directly R/3
Thanks
Swarup

Error in Transferred from ECC to GTS

Hi experts
We are getting the following errors in our Development and Staging system
When running transaction /SAPSLL/PRODUCT_TLSH
Red Light on
Log: MATERIAL TRANSFER 09/19/2011 12:03:42
Green light on
Transfer Log for Product IM001FERT1-NY01 Transferred from Feeder System DEVCLNT020
Red light on
Object /SAPSLL/EPR is blocked by user ERUKULLA
Red light on
Internal error in program object /SAPSLL/API_6850_SYNCH (RC = 2) - processing terminated
Our ECC 6.0 Development system is on
PI_BASIS
Release - 701
Level - 0006
Highest Supp Pack - SAPK-70106INPBASIS
Software Component Description - Basis Plug In
Our GTS Development system is on
PI_BASIS
Release - 2006_1_700
Level - 0015
Highest Supp Pack - SAPKIPYM15
Software Component Description - Basis Plug In ( PI_BASIS) 2006_1_700
Can anyone tell me if those of the correct versions for each system?

Hi Teresa,
I'm not completely familiar with the technicalities, but one of the things that will cause Product Transfer to fail with the exception "Processing Error" (RC = 2) is a missing or full Number Range. So check the Number Range SLL_PROD, and make sure that Interval '01' exists with available numbers.
As far as I know, the Product Transfer works ok with more-or-less any versions of ECC and GTS.
Regards,
Dave

D/loading f/fox 4.0 almost crashed my xp; when i clixk on f/fox i get error connection lost from server

I tried to d/load f/fox 4.o and my computer almost crashed save a blue screen that shutdown computer. I cant click on f/fox icon; get error unable to find firefox.com. REst of my computer is ok and yahoo can be d/loaded.

I still have this problem.

Sapwebdispatcher: ERROR: Connection to message server failed

Hi Team,
We have been facing an issue on the webdispatcher. Web-disaptcher is notable to communicate with the Message Server[PRD-XI].
=====================
Environment: Set-up =
=====================
1. The Webdispatcher is in DMZ. We have opened the port 8100 at the firewall.
==========================================================================
ERROR MESSAGE
==========================================================================
[Thr 2058] Fri Jan 11 18:53:27 2008
[Thr 2058] *** ERROR => NiBufIConnect: non-buffered connect pending after
5000ms (hdl 4;10.1.10.56:8100) [nibuf.cpp 4611]
[Thr 2058] *** ERROR => Connection request from (-1/65535/0) to host:
10.1.10.56, service: 8100 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2738]
[Thr 2058] *** ERROR => IcmConnClientRqCreate() failed (rc=-8)
[icrxx_mt.c 5100]
[Thr 2058] *** ERROR => Could not connect to SAP Message Server at
10.1.10.56. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2459]
[Thr 2058] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2460][Thr 2058] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2461]
==========================================================================
SAPWEBDISPATCHER VERSION DETAILS:
==========================================================================
wd011:wpiadm 73> sapwebdisp -v
SAP Web Dispatcher Version 7.00.10, multithreaded, ASCII, 64 BIT
kernel information
system name =
kernel release = 700
database library =
compiled on = AIX 2 5 005DD9CD4C00
compile time = May 19 2007 01:59:47
update level = 0
patch number = 110
source id = 0.111
supported environment
operating system
AIX 1 5
AIX 2 5
AIX 3 5
=============================================================================
TEST OUTPUT
==========================================================================
wd011:wpiadm 71> sapwebdisp -bootstrap
SAP Web Dispatcher Bootstrap
============================
This bootstrap will perform the following steps:
1. create profile file "sapwebdisp.pfl"for SAP Web Dispatcher (if not
already existing)
2. create user for web based administration in file "icmauth.txt"(if notalready exisiting)
3. start SAP Web Dispatcher with the created profile
After the bootstrap you can use the web based administration
Generating Profile "sapwebdisp.pfl"
Hostname of Message Server (rdisp/mshost): 10.1.10.56
HTTP Port of Message Server (ms/http_port): 8100
Checking connection to message server...
ERROR: Connection to message server failed: NIECONN_REFUSED
Do you want to continue with these settings? no
==========================================================================
BACK-END APPLICATION MESSAGE SERVER DETAILS: SID: PPI [PI/XI]
==========================================================================
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Thu Jan 3 15:31:05 2008
[Thr 1] WLM Tag 'PPI/MSG' successfully set for this process
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2519162
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2519162)
[msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/PPI/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.1.10.56] pi100 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] loopback (LOCALHOST)
[Thr 1] 3 : [10.1.99.4] pi100v (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = pi100
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsPPI (3600) ***
[Thr 1] *** I listen to internal port 3900 (3900) ***
[Thr 1] *** HTTP port 8100 state LISTEN ***
[Thr 1] CUSTOMER KEY: >R1306811094<
[Thr 1] Thu Jan 3 15:31:28 2008
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403
Forbidden)
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403
Forbidden)
======================+++++++++++++++++++++++++++==============================
Please find the attached file for a better understanding of the trace file.
A quick action on this would be much appreciated.
Please let me know for any information required.
Thank you.
Regards,
~sagar

Vipin,
I don't have access to our firewall myself to confirm what ports and services we opened (I worked with our Network Operations team to get this done), but if I recall correctly, it was pretty limited, just http and https over tcp ports 80, 443, 8100, and 8101. Probably could even restrict that to just https over 443 and 8101. However, from your configuration, you don't yet have your web dispatcher configured to talk to your message server over https, only http. I would recommend that you get the web dispatched completely configured and working in as close to your final desired configuration as possible while keeping it inside your firewall, not your dmz. Then move it to the dmz and see what breaks, and that way you know it's just the firewall that needs configuration at that point.
To configure the SSL termination, the following are the parameters required and the way that I configured them in our scenario (which terminates incoming SSL requests and re-encrypts them when sending them on to the backend, and also uses SSL for message server communication):
rdisp/mshost = mshost.domain.org
ms/https_port = 8101
wdisp/server_info_protocol = https
wdisp/group_info_protocol = https
wdisp/url_map_protocol = https
icm/server_port_1 = PROT=HTTPS,PORT=443,TIMEOUT=30,PROCTIMEOUT=600
icm/server_port_2 = PROT=HTTPS,PORT=8101,TIMEOUT=30,PROCTIMEOUT=600
icm/host_name_full = wdhost.domain.org (note, use the externally visible name as registered on your SSL certificate for web dispatcher here; does not need to match the actual machine hostname, but must be resolvable in external DNS)
icm/HTTP/admin_0 = PREFIX=/sap/admin,DOCROOT=\usr\sap\RW1\W00\data\icmanroot/admin,AUTHFILE=\usr\sap\RW1\SYS\global\security\data\icmauth.txt,PORT=8101
ssl/ssl_lib = $(DIR_EXECUTABLE)\sapcrypto.dll
ssl/server_pse = $(DIR_INSTANCE)\sec\SAPSSLS.pse
ssl/client_pse = $(DIR_INSTANCE)\sec\SAPSSLC.pse
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 1
is/HTTP/show_detailed_errors = FALSE
wdisp/permission_table = $(DIR_INSTANCE)\sec\ptab
On the backend host I have the following parameters:
sec/libsapsecu = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssfapi_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssl_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssf/name = SAPSECULIB
icm/server_port_2 = PROT=HTTPS,PORT=443,PROCTIMEOUT=-1
ms/server_port_1 = PROT=HTTPS,PORT=8101
Naturally, a server certificate is configured on the backend that the web dispatcher trusts (it can be an internally generated certificate; the outside public just needs to trust the web dispatcher's certificate, so that one should come from a recognized CA). Port 8101 is NOT open from the outside, just from the dmz and only to/from the web dispatcher host (this does allow me to use the webadmin interface from the inside). The https service also has to be activated on the backend in SMICM.
There's good advice about security setup for the web dispatcher in Note 870127, and troubleshooting advice in the Note mentioned in your tracefile output, 552286. Fairly complete documentation is in the online help at http://help.sap.com/saphelp_nw70/helpdata/en/de/89023c59698908e10000000a11402f/frameset.htm. Note 538405 is also good, more for performance configuration than security.
I hope you find this helpful.
--Matt

Connectivity error to SAP gateway from Eclipse

Hi All,
I am facing an issue in connecting to the SAP Gateway from Eclipse while trying to create a UI5 app to consume the Gateway service.
Please note that the gateway is accessible via web browser.
Also, that i already checked other threads on SCN to cater to the problem & hence i have already added the required SSL certificate to the Eclipse JRE installation. But unfortunately, i am still facing the issue. Please help me at the earliest. TIA.
Regards,
Sumit Jindal

Hi Sumit,
the server port is 443 and client is 520 .
-Virinchy

Error Connecting to SLD, while CC integration with ECC 6.0

Dear All,
I am using the CC v and from ECC IDES. I cannot connect to the SLD. It is giving an Error.
When I try to register the Server Programs in Vis Admin and click the SET button I am getting an error "Error Adding Bundles". In the ABAP part I am getting the same error of RFC connection.
Now from ECC when I do a SM59, and then goto TCP/IP connections, on creating this connections I cannot make them UNICODE as the R3 system is Non-Unicode. So these dont work.
What am I supposed to do.
Please let me know. This is very urgent and useful replies will be awarded full points.
Thanks and Best Regards
Chakra and Somnath

Replying to this old post hoping for some answers.
We had researched this and converted to Integrated ITS using our ZCATW over a year ago. The notes read that while integrated ITS is a suppoted platform, ESS scenarios for which newer technology exists are no longer supported. We tested ZCATW under ECC5 and decided to move forward because of a pending technical upgrade. We are now in the middle of the technical upgrade and wishing to keep it technical we are trying to keep ZCATW going and then look at the newer components as a seperate project. Has anyone found a way to overcome the above issue in CATW/ECC6?
Thanks,
Doug

Error to send a IDOC from ECC to SUS

Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
Erik

HI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM

Error connecting to DB2 via DRDA gateway for db2

Linux 2 node RAC system version 10.2.0.4. Installed DRDA for db2 LUW version 11.2 into a new home on the existing RAC nodes. Installed and configured and followed note 945879.1. Restarted listener and configured tnsnames.ora successfully on both nodes. TNSPING works for the dg4db2 'SID' created. Created a database link, and when I tested by getting a simple count, I received the following error:
select count(*) from schema.mydb2_table@db2_105
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from DB2_105Here's my listener config:
SID_LIST_LISTENER_NODE1 =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
      (PROGRAM = extproc)
      (SID_NAME=dg4db2)
      (ORACLE_HOME=/u01/app/oracle/gateway/11_2/)
      (ENVS=LD_LIBRARY_PATH=/u01/app/oracle/gateway/11_2/dg4db2/driver/lib;/u01/app/oracle/product/10.2.0/db_1/lib)
      (PROGRAM=dg4db2)
)Here's my tnsnames.ora:
dg4db2 =
(DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=vip-node1)(PORT=1521))
    (CONNECT_DATA=(SID=dg4db2))
    (HS=OK)
)Here's the initdg4db2.ora - ip address and obfuscated:
HS_FDS_CONNECT_INFO=[the ip address]:theport/ips,LUW
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
HS_TRANSACTION_MODEL=COMMIT_CONFIRM
HS_FDS_TRANSACTION_ISOLATION=READ_COMMITTED
HS_FDS_SUPPORT_STATISTICS=TRUE
HS_FDS_RESULTSET_SUPPORT=FALSE
HS_FDS_PACKAGE_COLLID=ORACLEGTW
HS_IDLE_TIMEOUT=0And my db link syntax - database name and password obfuscated:
CREATE DATABASE LINK db2_105
CONNECT TO THEDB2DB
IDENTIFIED BY somepassword
USING 'dg4db2'tnsping output:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=vip-node1)(PORT=1521)) (CONNECT_DATA=(SID=dg4db2)) (HS=OK))
OK (0 msec)Listener log from first node:
08-FEB-2010 13:36:30 * (CONNECT_DATA=(SID=dg4db2)(CID=(PROGRAM=)(HOST=node1_hostname)(USER=oracle))) * (ADDRESS=(P
ROTOCOL=tcp)(HOST=vip-node1)(PORT=55214)) * establish * dg4db2 * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptorNot sure where to go from here troubleshooting-wise. I understand that with 11.2, there is no longer a need to bind packages? Any help is much appreciated.
Edited by: kellypw on Feb 8, 2010 12:06 PM
Edited by: kellypw on Feb 8, 2010 12:20 PM

your listener.ora contains an error in the SID section. you miss a closing bracket for the extproc SID and another SID_DESC for the dg4db2 SID:
SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
) #closing bracket is missing
(SID_DESC = # SID desc is missing
(SID_NAME=dg4db2)
(ORACLE_HOME=/u01/app/oracle/gateway/11_2/)
(ENVS=LD_LIBRARY_PATH=/u01/app/oracle/gateway/11_2/dg4db2/driver/lib;/u01/app/oracle/product/10.2.0/db_1/lib)
(PROGRAM=dg4db2)
After changing the listener.ora, stop and start the listener.

Error when transfer PR from ECC

Hi,My experts:
     I work in SRM5.0 .PDP
    I want to transfer PR form ECC to SRM .I finished the configurtions .Then execute the program "BBP_EXTREQ_TRANSFER".
   But ,SRM did not receive the PR.In SLG1 (SRM system ),It dispalys "External partner number and partner GUID reference different partners".I want to konw what mean it is? and how to do ?
   PS:The RFC user which is used to connect from ECC to SRM must exist in ECC?
BR
ALEX!

Hi Alex
plz refer the below links
Re: PDP - PR transfer error ANORETRY
Re: External Requirments
seems that logical system entry is correct w.r.t client in scc4 in the tables profile table.
please check itup.
rfcuser must be in both system and must be assigned to entry channel.
br
muthu

Error when Extracting Metadata from ECC

Hello,
DS 4.2 was working fine with ECC after the creation of RFC connection. I was able to pull some of the tables. but after Basis team made some security changed with the objects, I am not able to pull the metadata from ECC.It is showing the following error. Can any one help me with this.

Hi Navinchandar Selvaraj,
As per there discussion
Yeah it is not a best practice to assigning SAP_ALL. You should create a new role with authorization. Please contact your basis team. Ask them to create a New role and grant Authorizations. But in some cases SAP recommended to assign SAP_ALL authorization.
Hope this will help you out
Authorization Profile SAP_ALL - Identity Management - SAP Library
This composite profile contains all SAP authorizations, meaning that a user with this profile can perform all tasks in the SAP system. You should therefore not assign this authorization profile to any of your users. We recommend that you create only one user with this profile. You should keep the password of this user secret (store it in a safe) and only use it in emergencies (see also Protective Measures for SAP*).
Instead of using the SAP_ALL profile, you should distribute the authorizations it contains to the appropriate positions. For example, instead of assigning your system administrator (or superuser) the authorization SAP_ALL, assign him or her only those that apply to system administration, namely the S_* authorizations. These authorizations give him or her enough rights to administer the entire SAP system, without allowing him or her to perform tasks in other areas such as Personnel.
Best Practice - How to analyze and secure RFC connections - Security and Identity Management - SCN Wiki
Regards,
Akhileshkiran

Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
Thanks

Hi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
Rj

Hello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva.

Error while loading data from ECC to BI

Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
Thanks

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

Error during Upgrade from 4.6c to ECC 6.0

Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar K

Hi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar

Error Connecting Gateway from ECC

Similar Messages

Maybe you are looking for