Error connecting integrator and record store with fetching the metadata

I am trying to fetch crawled data from record store in integrator and then upload them in a data domain. I am encountering an error regarding the connection between integrator and record store (error while generating metadata), It says "Exception encountered connecting to the record store and writing the metadata with the following message: Transport error: 404 error: Not Found". Please suggest the required action.

I found a installer for Quicktime that was not connected to iTunes and installed quicktime again.
Everything is now working.

Similar Messages

Issue with fetching the metadata of Agile tables

Can some one tell me how to retrieve metadata of all the tables of a particular Agile object and display it into an html page ? (something like how it is displayed in the Agile >Print preview)
Any help appreciated.
Thanks

There is a JavaDoc on SDK. it is located in SDK integration folder in Agile software. you need to access machiend where agile is installed.
for DB tables stuff, create schema doc using toad by pointing to Agile Schema.
Swayamsevak

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

How can I convert string to the record store with multiple records in it?

Hi Everyone,
How can I convert the string to the record store, with multiple records? I mean I have a string like as below:
"SecA: [Y,Y,Y,N][good,good,bad,bad] SecB: [Y,Y,N][good,good,cant say] SecC: [Y,N][true,false]"
now I want to create a record store with three records in it for each i.e. SecA, SecB, SecC. So that I can retrieve them easily using enumerateRecord.
Please guide me and give me some links or suggestions to achieve the above thing.
Best Regards

Hi,
I'd not use multiple records for this case. Managing more records needs more and redundant effort.
Just use single record. Create ByteArrayOutputStream->DataOutputStream and put multiple strings via writeUTF() (plus any other data like number of records at the beginning...), then save the byte array to the record...
It's easier, it's faster (runtime), it's better manageable...
Rada

TS1398 my ipad is connected to my wi-fi but the app store and itunes store never open, the internet nev    er works and it is always loading. i dont understand as it is a brand new ipad.

my ipad is connected to my wifi but the app store and itunes store never open, the internet never works and it is always loading but never working. I dont understand why as my computer works for my wifi and my brand new ipad should too.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT201210 No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??

No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
The Home and Sleep buttom does only promt the Connect to itunes...
Have closed down anti V and is admin and so on.....
Regards Martin

Hello mftoby,
Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
Thanks,
Matt M.

CDS-18010 Error:A Index and a index with the same name

Hi
I am facing strange error is some one expert there to help me to get rid of this error.
CDS-18010 Error:A Index and a index with the same name 'LA_SP_FK_1' have been asked to be created.
I am generating tables from Data model diagram & getting this error.
Thanks,
Vijay

Your Right!!
Designer does not like 2 of the same name.
there are several bugs on the same name issue and CDS-18010
Bug.3973155/3443005 (92) CDS-18010 IN CAPTURING A TYPE WITH CONSTRUCTOR FUNTIONS IN ITS BODY:
Bug.2586582 (93) CDS-18010 A DOMAIN AND A DOMAIN WITH THE SAME NAME 'D1' BEEN ASKED TO CREATE:
Bug.2561625 (15) CDS-18010 GENERATION OF TWO SYNONYMS WITH SAME NAME BUT DIFFERENT SCOPE:
Bug.2072505 (93) CDS-18010 CAPTURING 2 TRIGGERS WITH SAME NAME ON ONE TABLE SHOULD BE A WARNING:
Bug.1689800 (90) CDS-18010 PLSQL WITH THE SAME PROCEDURE NAME ALREADY EXISTS:
Bug.1073311/1029997 (96) CDS-18010 ERROR ATTEMPTING TO CREATE 2 PROCEDURES WITH SAME NAME:
Just to name a few.
I would suggest you change the name.
Michael

HT3743 I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do

I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
please advise me,
best regards,
Ahmed

try to edit your host file ang delete any line that contain gs.apple.com

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

Hi HARISH INDIA,
That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Take it easy,
-Norm G.

Use two streams to manager client video/audio,Can i combine streams and record it with server AS API

Use two streams to manager client video/audio,Can i combine streams and record it with server AS API
I tried Stream.play()
var s=Stream.get("combine");
s.play("video");
s.play("audio",null,null,false);
s.record("append");
it's don't work!!

Thanks, that's what I had thought. Our domain.com zone is sourced internally and replicated to our advertisers for external users, so there's no way to change the result for internal vs external users.
This is a rudimentary question that I should already know but I sort of inherited this after it was built: Can I have users sign in with their email address ([email protected]) but under the hood, their SIP address is [email protected]? This would let users
sign in with an address they expect, but it would take advantage of the the local lyncdiscoverinternal record.
Thanks,
Matt

I'm facing a problem only for this account that whenever I purchase a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also when i visit the store from the same account to downlo

I'm facing a problem only for this account that whenever I purchase a ringtone after few hours it disappears from the sound and it happened with all the ringtones I purchased since 2 days. also when i visit the store from the same account to download the ringtones again i have to buy them again and again . Please try to fix this problem for me and refund my money back.

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
There are lots of other posts on this forum about ringtones. If you want to contact iTunes Support then you can either use the 'report a problem' page : http://reportaproblem.apple.com
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I would like to inform you that i have received today an email from Apple adrees (Warning your account has been limited), Apple in this email requesting me to update my Apple ID information. After i updated that as well and follw up with instructions the

i would like to inform you that
i have received today an email from Apple adrees (Warning your account has been limited), Apple in this email requesting me to update my Apple ID information. After i updated that as well and follw up with instructions the massage bellwo was appeared to me(Apple ID doesnot have permission to access iTunes connect)
I appreciate if you kindly explain this and tell me please if i do something wrong.
You feedback is high appreciate.

You have been scammed. Most likely your iTunes account will be hacked. Contact Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.
BTW. The forums are user forums. You aren't speaking to Apple here.

Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

After formatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes.

After reformatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes. When connected to iTunes, it sees it in the restore mode and also asks to restore the iPod. It happens over and over for the last months. What could be the problem?
iPod Classic 80Gig.
Thanks in advance.

Dear planb77
Thanks for a reply. iPod does not support ntfs - you're right. that means it will never work on that. While restoring ipod using iTunes, itunes reformats it no matter what filesystem is there. So the issue is not that. ipod is now on fat32 and it works for a certain period of time, but then crashes and asks to restore through itunes. Resetting/restarting does not help.

I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

Hi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

Error connecting integrator and record store with fetching the metadata

Similar Messages

Maybe you are looking for