Error connecting to HDD on my router

I am running Mountain Lion on MacBook Air. I have a HDD connected to my router (A Technicolor VDSL Wifi Modem). I can Connect to the HDD from both my PCs, however the Mac cannot. I have read a lot about this and am very confused.
I get the following error:
The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem.
On my routers webpage it appears that the system being used is NFS.
Many thanks and any help is appreciated

I've got a feeling that support for NFS changed with Mountain Lion. I had a similar issue with my NAS, but it was getting old anyway.
There is a thread elsewhere on this issue which might help.
https://discussions.apple.com/thread/4144999?start=0&tstart=0

Similar Messages

I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hi,
I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

Hello there hastibahreini,
It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling

Cannot connect IBM Thinkpad to Linksys Router Wirelessly

I recently moved in with a friend, and my IBM Thinkpad T42, with Windows XP, cannot connect to her Linksys WRT120N router wirelessly. I am able to connect to the internet using an Ethernet cable, and I am able to connect to other public wireless networks.
I have been told by Cisco helpdesk people that it is because Windows XP does not support WPA2 security, and/or that because they don't know much about IBM computers, I should get rid of the third party internet connection software, IBM Access Connections, that came with my computer.
I have been having this problem for a week, and I did not even know I had IBM Access Connections until today, so I don't think that's the problem. Also, my friend has been using that application successfully on her computer, Thinkpad T61, Windows XP, to connect to this router, which she has been using for 2 years. So with two almost identical computers, does anybody know why my wireless connection isn't working?

Answer these questions, I may be able to give you the right solution to your issue:
1. Go to your Network Connections folder on your wired computer and check which one is connected:
a. Local Area Connection
b. Broadband Connection
c. 1394 Connection
2. What is the IP address of your computer?
3. Who is your internet service provider?
4. What is the error message when you connect the wireless computer to the network?

Is it possible that iMac corrupts connected external hdd-s drive via USB?

Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
strange.
if anybody has a clue?
update 1:
i found this post also:
https://discussions.apple.com/message/15905481#15905481
I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.

It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed

Error connecting, tap to retry, it sees my WiFi and computer name but can't connect

Hi all, I am trying to get Edge Inspect to work on my Windows 7 PC (it did work for me a few times when I had it installed as Shadow when it initally came out)
I have read through various forum posts. I am also running Mcafee Virusscan/Firewall.
In Google Chrome I have the extension installed at the little "In" symbol top right, when I click it it says Adobe Edge Inspect "On", please start the Adobe Edge Inspect Application.
I open up the lastest version of Edge Inspect (v1.0.393) on either my iPhone or iPad, it shows the name of my WiFi router and shows the name of the computer that is running Google Chrome, it looks like it is searching for a connection (shows spinner) and then it says "Error connecting, tap to retry".
I have opened up port 7682 in my Mcafee Firewall
I have shutdown all open programs
I have tried manually entering in the computer IP address via manual connect
I have updated chrome extension and ios apps to latest version
I have tried reinstalling chrome extension
I have tried at Windows Command prompt "netstat -ano" it doesnt show port 7682 being used, until I open up Google Chrome, then it shows MYCOMPUTER:7682 SYN_SENT, which I checked the PID against and yes it is Google Chrome using 7682
Any help would be great

Hi again Mark, still no luck here.
I also have a Mac in my network so I thought I'd try installing to that to see what would happen, I just installed Adobe Edge Inspect extension onto Google Chrome on that machine and restarted the iOS apps on both iPad and iPhone and they actually didnt see the Mac machine at all, still just shows the PC computer.
Also did I mention on my iPad I can still see the last time the connection actually worked (when it was called Adobe shadow, on my iPad underneath MYCOMPUTERNAME Error Connecting, tap to retry it has MYCOMPUTERNAME Last Used 24/07/12 8:59PM). Wouldnt have anything to do with a conflict with the old Adobe Shadow or anything would it, I'm pretty sure Adobe Shadow got uninstalled by default anyway, just a thought.
So I'm not sure if it can be a problem with the Router because nothing has changed with the router since the last time it successfully worked when it was Shadow? I did add the Mac machine to the network since this time, but that machine hasnt been on when I have been doing any of this testing anyway.
Also in the Edge Inspect in the Chrome browser I do not see any deviced listed, but back on the iOS App I do see the Wifi network and Computer name as discussed, so does this mean its an inbound connection issue or?
Also sent you router settings via private message etc.

Wifi problem with repeaters - there was an error connecting

so I'm repeating a motorola gateway's wifi signal with a belkin f5d7132..
with the repeater on .. opperating. and doing its range extending magic, my pc can connect to the network, but my mac throws up an "error connecting to network" message.. "trying again" gets me nowhere.
unplugging the repeater fixes the mac up nicely... it's able to connect directly to the motorola gateway..
when I look at all the wifi connections. it show two instances of the "repeated" signal... two "ian" ssids.. I wonder if this duplicity is messing things up for me and my macbooks attempt at connecting to the repeated wifi.. I linked to a couple screen captures of my motorola and belkin config pages..
the one thing that surprises me, is that the belikin router doesn't have an "entry" in the motorola DHCP list.. I'd think the belkin repeater would have to lease an IP address from the motorola, and that lease would be noted in the motorola's dhcp table.. I'm sure there are different schems for repeating..
anybody successed with this belkin in a mac / pc cross platform environment? any magic settings that I'm missing?
here are links to those two screen captures
router - http://farm1.static.flickr.com/159/3950965454ebef30daao.jpg
repeater - http://farm1.static.flickr.com/135/395096541cbe4473870o.jpg

Ok. Got it fixed.
For a real fix:
Try trashing the ~/Library/Application Support/Apple/AirPort folder. This should solve the problem this time and next time.
If you are reluctant to do that, log into your 'test' account. (You do have a test account, don't you?)
Do the update from there.
Apparently we have something corrupted in our support directories for the AirPort device.
I first fixed my problem by doing the alternate log in method and found that all 3 of my devices were needing a firmware update but only the Capsule was reporting an update within my own account.

Import of a request failing : ERROR: connect failed due to DbSL load lib fa

Hi,
I am using ecc6, on hp-unix and oracle as database.
When i try to import a request from stms, i get this error.
DURING IMPORT ERROR:
    Transport control program tp ended with error code 0249
    Errors: connect failed due to DbSL load lib failure
TP ERROR:
Transport control program tp ended with error code 0249
    Message no. XT200
Diagnosis
    An error occurred when executing a tp command.
      Command:        IMPORT E07K901512 DEV client100 U01 pf=/usr/sap/tr
      Return code:    0249
      Error text:     connect failed due to DbSL load lib failure
      Request:        E08K901525
System Response
    The function terminates.
Procedure
    Correct the error and execute the command again if necessary.
THEN I TRIED TO IMPORT USING TP COMMAND:
WITH OUT DIR_LIBRARY
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "environment variable DIR_LIBRARY is not set."
./R3trans finished (0012).
% # export DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
% ./R3trans -d
This is ./R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- ORACLE_SID =
'DEV'"
./R3trans finished (0012).
% ./tp connect DEV
This is ./tp version 370.00.09 (release 700, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
COULD SOMEONE GIVE ME A SOLUTION TO OVERCOME THIS.
YOUR SOLUTION AND GREATELY APPRITIATED.
REGARDS,
DHANANJAY

Hi Dhanajay,
Firstly check if R3trans -d is working fine.
If so, please chek if the following parameters are set properly.
DIR_LIBRARY=/usr/sap/<SID>/SYS/exe/run
TRANSDIR = ....\trans
<SID>/DBHOST = <HOSTNAME>
<SID>/DBNAME = <SID>
<SID>/DBTYPE = ora
Execute the below command and check the transport profile:
tp check all pf=/usr/sap/trans/bin/TP_DOMAIN_<SID>.PFL
Please confirm the permission of the /oracle/ directory
The permission of the /oracle should be 755.
Also check if the import queue is not locked.
Also please ensure the Kernel is of latest version, if not, please update the DBSL shared library.Please look at the note 19466.
Finally you can try once distributing and activating the transport routes once.
When you executed command R3trans -d logfile trans.log will be created.
Please check this file for exact error information.
Paste the log file here.
Let us know the outcome.
Regards,
Sujit.

Error connecting to WebDAV

I have set up a WebDAV server on my Windows 7 desktop, mapping one drive to the :80 port, and another drive to the :81 port. I am able to connect to both drives on my MBA running Mountain Lion through the browser (Chrome, Safari, Firefox all work). I enter http://myexternalip:80 (or :81), am prompted for a username/password which I enter (the admin account info on my PC) and am connected immediately.
In order to mount the WebDAV drives in Finder, I then proceeded to the Finder window to 'Connect to Server...' and enter the same information. I am again prompted for a username/password, which I enter. I then receive an error: "There was a problem connect to the server 'myexternalip'. Check the server name or IP address, then try again. If you continue to have problems, contact your system administrator."
I figured this may be in issue with Finder, so I also attempted to connect through CyberDuck. However, I still cannot connect, as I get a "Login failed" error in CyberDuck.
I am confused as to why I am able to connect to the WebDAV server via browser, but not through Finder or 3rd party apps. Is this an issue with the WebDAV server setup on my Windows PC, or is it an issue with OSX?
NOTE: On my Win7 PC, I have set up WebDAV with authoring permissions granted to the admin, with Windows Authentication enabled. In addition, I have 'Directory Browsing' enabled, and have set up ports 80 and 81 in Windows Firewall and my router to the appropriate IP address (which is set as static 192.168.1.100).
Any help would be appreciated. Thanks.

http://helpx.adobe.com/dreamweaver/kb/webdav-error-connecting-server-using.html

Wireless connection between D-Link WiFi router and Time capsule stopped working

We have an ISP provided D-Link wireless router (DIR-615) to which we wirelessly connected our 2Tb Time Capsule for back up and to connect a USB printer to out network. This worked perfectly for 3 1/2 years, until about a month ago, when the time capsule suddenly decided to go "off line". ie we could no longer access it or the printer via our wireless network. We had changed nothing - just one day it stopped working.
We tried to get it back online with no success. As the 2Tb Time Capsule was almost 7 years old and had had some HDD issues in the passed, we figured it had got old and died and that it was time to replace it; so we bought a new 3Tb Time Capsule, thinking this would get everything back to normal.
However much as we tried, we were also unable to get the new 3Tb Time Capsule to connect wirelessly to the D-Link wireless router. The Airport Utility did not show the D-Link wireless router or its wireless network, although we were (and are) able to see it in Systems Preferences>Networks from all our multiple devises. This in itself seemed odd. No matter what we tried, the Airport Utility would not find the D-Link wireless router and hence we could not add the 3Tb Time Capsule to the existing wireless network.
At the end of the day we got fed up with trying to add the 3Tb Time Capsule to the D-Link wireless network, and connected it via a LAN cable to the D-Link router instead. We then set it up as its own network. Worked gerat. Having done that we thought maybe the old 2Tb Time Capsule might not have been the problem after all, so we tried extending our new 3Tb Time Capsule wireless network using the 2Tb Time Capsule wirelessly. This worked perfectly! And we are now almost back to what we wanted.
So although we have a work around, this means now have 2 separate wireless networks as opposed to the original single wireless network where everything talked to everything else.
Can anyone shed any light on any of the following:-
1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?

1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
A firmware update to the TC came along and you agreed to it without perhaps even noticing.. it then smashed your setup because Apple do not recommend the setup you were using and it is very poor.
2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
Because it is such a poor setup that Apple have taken away your ability to choose it unless you know exactly what you are doing.
3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?
Yes, this I can help you with.
I have several ways around the problem.. but the first one is.. why use the DIR-615 at all.. it is not a modem.. it is a very ordinary bottom end, poor single band slow wireless router.
Why don't you simply remove the DIR-615 from the network completely.. plug whatever it is the ISP supplies you.. an ethernet connection from whatever that modem is you mentioned into the WAN port of the Time Capsule. And use the TC in some router mode.. same as the DIR-615 was setup.. dhcp or pppoe or whatever.. I doubt the TC cannot match it.
If you have issues please post a few screenshots from the DIR-615 to show how it is setup from the WAN side.. and as long as you are given the username and password or whatever the ISP uses to authenticate then chuck out the DIR-615.
Tell me if that is a goer.. if not we can work out a few other methods..
eg. Simply turn off the wireless in the DIR-615. It is poor cf the TC and there is no need for it.. with the TC in bridge only use the TC for wireless as well as wireless extend with your old TC.
Or setup roaming network where everything uses the same SSID.
Then you will have one wireless network. And it won't matter what as long as it connects.. although IMHO this is not right as the TC is such a superior router now you are wasting your new TC.

There was an error connecting to the network, try again!

I bought a new Computer (Mac Mini) with Snow Leopard installed; On joining the network(WEP128Bit) airport extremebasestation and airportexpress with WDS-mode) suddenly the basestation didnt offer WEP 128bit any more. I cant remember precisely but i think ist got something to do with the firmwareupdate of the AEBS or that i gave up WDS and changed to „extend a wireles network“ , well it only offered „WEP transitory“ which did not work properly for some reason;
So i changed to WPA/WPA2 option and extending my network with the airport express.
This worked fine; two computers with leopard, the new one with Snow leopard and a windows Laptop as well as two Mobilephones could easily join the network.
BUT: My old Imac G4 with Tiger (10.4.11) could not join so easy.. (I changed the settings to WPA of course) The symptom was that on the right upper corner of the screen a message appeared saying: „there was an error connecting to the network, try again!“ and when i hit the „try again“ button up to 20 times then sometimes it suddenly succeeded to join.
I was just about to look after the wirelesscard but tried before one thing: I changed my network channel on the AEBS from „automatic“ to Channel 11.
From this time on i worked like a charm. I dont know why only the Imac G4 needed channel 11, but this solved my problem.
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi
Message was edited by: Alfi

Here is the list of DHCP Clients:
http://home.earthlink.net/~jeffny0...ExtClients.jpg
(MAC addresses scambled for security)
I am not sure what 192.168.1.193 is ??? The 16 port Asante switch??
Anyone know if there is a way to (easily) add "Client ID" names in XP? I went though my Macs and added names to help ID them in the router, but can't see where to add names in XP?
IP Address: 64.110.135.46
Subnet Mask: 255.255.255.128
Router Address: 65.110.135.1
(posting that does not compromise my security??)
I think I need to figure out how to get the HP 4050 to renew its IP address? Then the router should assign an address to it.....I would like it to use the same address it has now so I don't have to recofigure addresses on the computers to print to it......hummm
DHCP Begining Address: 191.168.1.2
DHCP Ending Address: 191.168.1.200
DHCP Lease: 4 (hours)
COUPLE HOURS LATER......
Just tried turning off the HP 4050 and unplugging it from the wall. Then plugging it (power) back in and turning it on, trying to get it to renew its IP address with the AirPort Extreme router.....nothing. Still does not show up in my list of DHCP Clients.
Tried Restarting the router.....now I see no clients at all in my list of DHCP Client list..... grrrrrr
Can anyone tell me why AirPort Extreme is not seeing the HP 4050 as a DHCP client?
Jeff-

Vauge Error Connecting to Internet

I bought my macbook pro yesterday and am a little on edge since I'm already having problems with it. I bought the macbook pro yesterday afternoon. I came home and immedietly booted it up. It ran through the first time boot stuff just fine, even when it got to the internet connections part, airport quickly connected to my home network without a single problem. I played around with it for a few hours, doing NOTHING that would affect any network connection settings. I plug it in to charge and go out to dinner. When I get home, it is disconnected from the internet, and cannot connect. I simple try to reconnect, but it vaugely says that there is an error connecting to network "home". After this I run network diagnostics tools over and over, still it no avail. It says I need a password to access the network, and I know for a FACT that my network does not have a password, let alone any other security features. All my pc's, which are connected to the network wirelessly, work just fine. It is impossible that another network is interfereing because I live on a twenty acre farm, hince the no need for network security. See basically, my network is operating as it always does, so I know the router is not the problem. Since I know virtually nothing about macs, I figured I would post here and hopefully someone could give me a solution.

i certainly hope this isn't the case but you should check out these topics if you haven't seen them yet. you may be experiencing what others are also having trouble with. there are a lot of MacBooks and MacBookPros having connection problems these days. and also a lot that are not, just to be fair.
http://discussions.apple.com/thread.jspa?threadID=1007678&tstart=75
http://discussions.apple.com/thread.jspa?threadID=986785

The connection between your access point, router, or cable modem and the Internet is broken.

At random points throughout my laptop usage, I randomly disconnect from the internet and receive these 2 messages:
1. The connection between your access point, router, or cable modem and the Internet is broken.
2. The default gateway is not available.
It fixes the issue for a short period of time, but constantly happens. This is really starting to annoy me. I have no problems on any other internet, and other people i live with are connected with no issues to the internet. I have tried a number of solutions
online that has "worked" for others to no success such as resetting the router, fooling around with command prompt, and changing the performance settings to not drop internet when low on power. Does anyone have a solution for my technical problems?
I am running Windows 8.1 on a Lenovo ideapad that is less than a year old. I will be honest I am not a very knowledgeable person when it comes to computers, so please use simplified explanations.

Checked this ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/window-networking-troubleshoot-error-the/c130ede9-757e-4224-9ae8-3cceb82eeb74
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Airport not maintaining internet connection on my D-link router with Macbook Pro 5.5 with Snow leopard

Airport keeps throwing me out of internet connection on my D-link router with Macbook Pro 5.5 with Snow leopard. Pls if anyone has a solution to this then let me know

I'm using my PC notebook because connecting with my iMac is IMPOSSIBLE!!! If I get connected at all, it's worse than dial-up speed.
We are wireless via a D-Link DIR-625 (new) -- but was having some problems before with a netgear. Problem much worse now. My computers are not the primary computers. My sister gets that coin toss. She is a PC user. I share with her using WPA2. When the iMac "wakes" the signal bands are strong, but when I go to a page I lose all signal strength. And several times a day I get a message indicating an error joining the network -- arghhhhh -- HELP!
Is the problem with D-Link or Mac? Thanks for any help.

HT4519 I have a yahoo email account and i keep getting an "error connection to the server failed"

The email account i have always used on my ipad mini is through yahoo. Now i keep getting an error "connection to the server failed" when trying to access my email.

its a common message but could be due to several possible causes
try this
close the mail app by double tapping the home button, swipe the screen until you see the large icon of the mail app. Swipe the app up and off the screen to close. Tap the home button to return to home screen. Open mail app again.
if that didn't work, then...
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
Unplug your wifi router for 5-10 minutes and at the same time reset settings on the ipad
settings/general/reset/reset all settings
(no data will be lost)

Internet won't work when connection goes through WRT54GS wireless router

I get the page not found error when I open the internet when my connection goes through my WRT54GS router. It works fine when it is plugged into the wall, although I have to disable/enable the local area connection in the network connection to reset the IP address.
Any suggestions?

Who is your ISP. You can configure your Router manually.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Error connecting to HDD on my router

Similar Messages

Maybe you are looking for