Error Connecting to SAP server via JCO
Hi,
When i tried to connect SAP server using JCO its giving error "Fatal error User name or password incorrect" .But with the same username and password i'm able to login to the SAP system with SAP logon pad. My username contains only numeric,does this have any significance?
Thanks,
Bala
Bala
type of username is not significant if it is correctly entered as same as entered in SAP Logon Tool.
U should configure the JCO Interface properly with connection details
SAP Server
SAP Client
SAP System Number
SAP User Name
SAP Password
Execution - True
Also every fields are very case sensitive, so hv deep look at every field with correction.
Pls tell me the LastErrorMessage using Tracer as follows SAPJCOInterface_0.LastErrorMessage
Regards
Som
Similar Messages
-
I have installed LifeCycle trial version .
and trying to convert pdf to rtf
using following initialization
Properties connectionProps = new Properties();
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "jnp://localhost:1099");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,Service ClientFactoryProperties.DSC_EJB_PROTOCOL);
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
//Create a ServiceClientFactory instance
ServiceClientFactory factory = ServiceClientFactory.createInstance(connectionProps);
but i am getting error like following though i have started jboss which is inside lifecycle folder by run.bat
ERROR IS:Error OCCURRED: Failed to connect to LiveCycle server via RMI. Make sure that the server is running and accessible to this client.May be you could use "netstat" or other tools like "ActivePorts" to ensure that ports established are correct.
Also try if jnp://127.0.0.1:1099 works or not, if ports are correct. -
Error connecting to ftp server
Dear All,
I'm doing file to file scenario through XI. The receiver communication channel is a normal file adapter and it is working perfectly fine . My sender communication channel is a FTP adapter. I'm trying to send a file from FTP to a folder on my integration engine. When i went into adapter monitoring, i got the error in the sender file adaper for ftp. The error is - " Error connecting to ftp server ".
normally, i'm able to do the ftp from integration server to my ftp server, but through XI , it is giving me the above mentioned error. I think some of my properties are not specified correctly. Kindly advise . The properties that i have specified in the ftp adapter are -
adapter type - file
transport protocol - ftp
message protocol - file
adapter engine - integration server
server - ip address of the ftp host
port - 21
username - username of the ftp server
password - password of the ftp user
connect mode - per file transfer
transfer mode - binary
folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
file name - file in the above specified folder
Kindly let me know.
Regards.
NaveenHI Naveen,
This link explains all the parameters that need to be entered for a file adpater. Just check it out and compare it with your values and your FTP settings.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
//folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
Yes, i think you should specify the full path here.
Regards,
bhavesh -
Can't connect to Report Server via Management Studio
Hi,
I have a local installation of SQL Server 2005 (Developer Edition) on XP Professional SP2, with Reporting Services, Integration Services, and Analysis Server installed.
I can connect to Integration Services and Analysis Server via the SQL Server Management Studio, but not to the Report Server. I can access and use the Report Server installation via http://localhost/Reports and http://localhost/ReportServer, and everything checks out on the Reporting Services Configuration tool, so the server appears to be working fine.
I've uninstalled/re-formatted/reinstalled the services (with all default options, and services running as "Local Service"), but always end up with the following error when connecting to Report Server via Management Studio:
The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Any hints would be appreciated...
Thanks,
/vijayanHere is the report server log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
<Locale>en-US</Locale>
<TimeZone>AUS Eastern Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\LogFiles\ReportServerService__06_22_2006_09_34_56.log</Path>
<SystemName>COUNTD2</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!resourceutilities!4!22/06/06-09:34:57:: i INFO: Reporting Services starting SKU: Enterprise
ReportingServicesService!resourceutilities!4!22/06/06-09:34:57:: i INFO: Evaluation copy: 0 days left
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Database Cleanup (NT Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Execution Log Entry Expiration timer enabled: Next Event: 59102 seconds. Cycle: 86400 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: SQM timer timer enabled: Next Event: 62702 seconds. Cycle: 86400 seconds
ReportingServicesService!library!8!22/06/06-09:34:58:: i INFO: Catalog SQL Server Edition = Enterprise
ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Initializing crypto as user: OBJECTIVEWARE\s.count
ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Exporting public key
ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Performing sku validation
ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Importing existing encryption key
ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: EventPolling polling service started
ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: NotificationPolling polling service started
ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: SchedulePolling polling service started
ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: UpgradePolling polling service started
ReportingServicesService!dbpolling!b!22/06/06-09:34:58:: NotificationPolling heartbeat thread started.
ReportingServicesService!dbpolling!a!22/06/06-09:34:58:: EventPolling heartbeat thread started.
ReportingServicesService!dbpolling!c!22/06/06-09:34:58:: Polling started
Here is the IIS log:
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2006-06-21 00:00:21
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2006-06-21 00:00:21 W3SVC1 203.166.122.177 GET /iisstart.htm - 80 - 203.166.122.223 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727;+InfoPath.1) 200 0 64
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2006-06-21 03:50:53
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2006-06-21 03:50:53 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 200 0 0
2006-06-21 03:51:15 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
2006-06-21 03:51:15 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 200 0 0
2006-06-21 03:51:31 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
2006-06-21 03:51:31 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2006-06-21 07:51:41
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2006-06-21 07:51:41 W3SVC1 203.166.122.177 GET /iisstart.htm - 80 - 203.166.122.223 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727;+InfoPath.1) 200 0 64
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2006-06-21 23:38:59
#Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
2006-06-21 23:38:59 W3SVC1 203.166.122.177 GET /Reports - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
2006-06-21 23:39:16 W3SVC1 203.166.122.177 GET /Reports/Home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/js/ReportingServices.js - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/styles/ReportingServices.css - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/images/blank.gif - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/images/48error.jpg - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:40:11 W3SVC1 203.166.122.177 GET /Reports - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
2006-06-21 23:40:11 W3SVC1 203.166.122.177 GET /Reports/Home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2006-06-21 23:40:13 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2006-06-21 23:41:26 W3SVC1 203.166.122.177 GET /Reports/home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2006-06-21 23:41:28 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2006-06-21 23:43:52 W3SVC1 203.166.122.177 GET /reports - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 301 0 0
2006-06-21 23:43:52 W3SVC1 203.166.122.177 GET /reports/Home.aspx - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 302 0 0
2006-06-21 23:43:53 W3SVC1 203.166.122.177 GET /reports/Pages/Folder.aspx - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 500 0 0
2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/js/ReportingServices.js - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/styles/ReportingServices.css - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/images/blank.gif - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/images/48error.jpg - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
Thanks,
Roshan. -
Cannot connect to Mavericks server via AFP
Yesterday we had our server rebuilt. I have added a couple of users and a group with read/write access.
I can only connect to volumes via SMB://10.XXX.XXX.XX
When I try AFP://10.XXX.XXX.XX
I get the following error:
‘There was a problem connecting to the
server "10.108.172.134".
Check the server name or IP address, and then try
again. If you contintJe to have problems. contact your
system administrator.'
With SMB connection I am getting errors trying to copy files to the server.
The error is:
‘The Finder can’t complete the operation because some data in “e.g File” can’t be read or written.
(Error code -36)’
Any ideas guys?
I can’t get hold of our IT guy today.
Mac Pro 2 x 2.8 GHz Quad-Core Intel Xeon
OSX 10.9.5
Server 3.2.2Hi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb -
Cannot connect to SGD server via proxy
Hello
We have a recently installed SGD server running.
Some clients have been setup today with accounts to access it but none of them can get on at the moment. The error message presented is as follows:
Cannot connect to the server sgd.ourdomain.co.uk:443
The HTTP proxy "NTLM" at devicename:8080 failed to connect to the server sgd.ourdomain.co.uk:443
The following response was returned:
HTTP/1.1 403 Forbidden
Clearly there's a proxy/firewall getting in the way.
Client has tried to connect from a network that is behind a different firewall and has been sucessful.
I'm hoping to get further details on the proxy/firewall setup but this could take a while.
Has anyone encountered this previously and if so, can any solutions be suggested.
Thanks,
RobHi Team,
I am facing the same issue and I am using Oracle system user credentials to connect Oracle server and I have also installed extension pack for the SQL Server instance which i am using for migration. Still I am getting the following error in last step (Migrate
data).
Cannot connect to Oracle server via SQL Server tester extensions.
Oracle
10.2.0.4 verion
SQL Server 2012 SP1
SSMA 6.0
Please help me if you have gone through the same problem.
Thanks,
Vijaysqldb -
I can't connect to Windows Server via FTP
I've been using FTP for about 13 years and it works fine on Apache servers but can't connect to a windows Server via my Fetch FTP program. The site owner sent me a screenshot and copied/pasted the password so I know I have the info correct. It is still giving me errors.
Is there a special method to connect to Windows server via FTP?Hi Lorel,
Try FileZilla...
https://filezilla-project.org/ -
Design Time Connection of SAP Server failure using TIBCO Designer
Hi All,
While Connection to SAP Server using TIBCO Designer using Design Connection Configuration followed error we are facing.
Connection Error. Unable to Create a Connection with the target application bdhn4973.na.pg.com using connection parameters
programID=BWAH-IFS-L6A430 gatewayService=sapgw00 and the target application error is 102RFC_ERROR_COMMUNICATIONConnect to SAP gateway failedConnect_PM TPNAME=BWAH-IFS-L6A430, GWHOST=bhdn4973.na.pg.com, GWSERV=3300LOCATION CPIC (TCP/IP) on local ost with Unicode ERROR partner 'bdhn4973.na.pg.com:3300' not reached TIME Mon Jul 18 03:28:21 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40RC - 10 MODULE nixxi.cppLINE 3284DETAIL NiPConnect2: 155.125.167.58:3300SYSTEM CALL connectERRNO 239 ERRNO TEXT Connection refusedCOUNTER 6
Note: SAP Server is running but still we are not able to connect from TIBCO Designer. Few times it's able to connect and few time it will throw an error while connecting to SAP Server.
Can you please help me if any one you have any idea regarding this.
Regards,
VijayaHi,
Since you are able to connect, seems the issue with network instability.
1) Create an RFC connection and perform the connection test. Note down the time taken (milli seconds), a notable delay also can be the cause of the issue.
2) Do the ping from Tibco system to SAP and note down the time taken
3)Also check the firewalls in between the two systems and check the valid access
You may need Nework admin teams help to cross check these.
Regards,
Syed -
Sapwebdispatcher: ERROR: Connection to message server failed
Hi Team,
We have been facing an issue on the webdispatcher. Web-disaptcher is notable to communicate with the Message Server[PRD-XI].
=====================
Environment: Set-up =
=====================
1. The Webdispatcher is in DMZ. We have opened the port 8100 at the firewall.
==========================================================================
ERROR MESSAGE
==========================================================================
[Thr 2058] Fri Jan 11 18:53:27 2008
[Thr 2058] *** ERROR => NiBufIConnect: non-buffered connect pending after
5000ms (hdl 4;10.1.10.56:8100) [nibuf.cpp 4611]
[Thr 2058] *** ERROR => Connection request from (-1/65535/0) to host:
10.1.10.56, service: 8100 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2738]
[Thr 2058] *** ERROR => IcmConnClientRqCreate() failed (rc=-8)
[icrxx_mt.c 5100]
[Thr 2058] *** ERROR => Could not connect to SAP Message Server at
10.1.10.56. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2459]
[Thr 2058] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2460][Thr 2058] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2461]
==========================================================================
SAPWEBDISPATCHER VERSION DETAILS:
==========================================================================
wd011:wpiadm 73> sapwebdisp -v
SAP Web Dispatcher Version 7.00.10, multithreaded, ASCII, 64 BIT
kernel information
system name =
kernel release = 700
database library =
compiled on = AIX 2 5 005DD9CD4C00
compile time = May 19 2007 01:59:47
update level = 0
patch number = 110
source id = 0.111
supported environment
operating system
AIX 1 5
AIX 2 5
AIX 3 5
=============================================================================
TEST OUTPUT
==========================================================================
wd011:wpiadm 71> sapwebdisp -bootstrap
SAP Web Dispatcher Bootstrap
============================
This bootstrap will perform the following steps:
1. create profile file "sapwebdisp.pfl"for SAP Web Dispatcher (if not
already existing)
2. create user for web based administration in file "icmauth.txt"(if notalready exisiting)
3. start SAP Web Dispatcher with the created profile
After the bootstrap you can use the web based administration
Generating Profile "sapwebdisp.pfl"
Hostname of Message Server (rdisp/mshost): 10.1.10.56
HTTP Port of Message Server (ms/http_port): 8100
Checking connection to message server...
ERROR: Connection to message server failed: NIECONN_REFUSED
Do you want to continue with these settings? no
==========================================================================
BACK-END APPLICATION MESSAGE SERVER DETAILS: SID: PPI [PI/XI]
==========================================================================
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Thu Jan 3 15:31:05 2008
[Thr 1] WLM Tag 'PPI/MSG' successfully set for this process
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2519162
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2519162)
[msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/PPI/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.1.10.56] pi100 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] loopback (LOCALHOST)
[Thr 1] 3 : [10.1.99.4] pi100v (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = pi100
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsPPI (3600) ***
[Thr 1] *** I listen to internal port 3900 (3900) ***
[Thr 1] *** HTTP port 8100 state LISTEN ***
[Thr 1] CUSTOMER KEY: >R1306811094<
[Thr 1] Thu Jan 3 15:31:28 2008
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403
Forbidden)
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403
Forbidden)
======================+++++++++++++++++++++++++++==============================
Please find the attached file for a better understanding of the trace file.
A quick action on this would be much appreciated.
Please let me know for any information required.
Thank you.
Regards,
~sagarVipin,
I don't have access to our firewall myself to confirm what ports and services we opened (I worked with our Network Operations team to get this done), but if I recall correctly, it was pretty limited, just http and https over tcp ports 80, 443, 8100, and 8101. Probably could even restrict that to just https over 443 and 8101. However, from your configuration, you don't yet have your web dispatcher configured to talk to your message server over https, only http. I would recommend that you get the web dispatched completely configured and working in as close to your final desired configuration as possible while keeping it inside your firewall, not your dmz. Then move it to the dmz and see what breaks, and that way you know it's just the firewall that needs configuration at that point.
To configure the SSL termination, the following are the parameters required and the way that I configured them in our scenario (which terminates incoming SSL requests and re-encrypts them when sending them on to the backend, and also uses SSL for message server communication):
rdisp/mshost = mshost.domain.org
ms/https_port = 8101
wdisp/server_info_protocol = https
wdisp/group_info_protocol = https
wdisp/url_map_protocol = https
icm/server_port_1 = PROT=HTTPS,PORT=443,TIMEOUT=30,PROCTIMEOUT=600
icm/server_port_2 = PROT=HTTPS,PORT=8101,TIMEOUT=30,PROCTIMEOUT=600
icm/host_name_full = wdhost.domain.org (note, use the externally visible name as registered on your SSL certificate for web dispatcher here; does not need to match the actual machine hostname, but must be resolvable in external DNS)
icm/HTTP/admin_0 = PREFIX=/sap/admin,DOCROOT=\usr\sap\RW1\W00\data\icmanroot/admin,AUTHFILE=\usr\sap\RW1\SYS\global\security\data\icmauth.txt,PORT=8101
ssl/ssl_lib = $(DIR_EXECUTABLE)\sapcrypto.dll
ssl/server_pse = $(DIR_INSTANCE)\sec\SAPSSLS.pse
ssl/client_pse = $(DIR_INSTANCE)\sec\SAPSSLC.pse
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 1
is/HTTP/show_detailed_errors = FALSE
wdisp/permission_table = $(DIR_INSTANCE)\sec\ptab
On the backend host I have the following parameters:
sec/libsapsecu = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssfapi_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssl_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssf/name = SAPSECULIB
icm/server_port_2 = PROT=HTTPS,PORT=443,PROCTIMEOUT=-1
ms/server_port_1 = PROT=HTTPS,PORT=8101
Naturally, a server certificate is configured on the backend that the web dispatcher trusts (it can be an internally generated certificate; the outside public just needs to trust the web dispatcher's certificate, so that one should come from a recognized CA). Port 8101 is NOT open from the outside, just from the dmz and only to/from the web dispatcher host (this does allow me to use the webadmin interface from the inside). The https service also has to be activated on the backend in SMICM.
There's good advice about security setup for the web dispatcher in Note 870127, and troubleshooting advice in the Note mentioned in your tracefile output, 552286. Fairly complete documentation is in the online help at http://help.sap.com/saphelp_nw70/helpdata/en/de/89023c59698908e10000000a11402f/frameset.htm. Note 538405 is also good, more for performance configuration than security.
I hope you find this helpful.
--Matt -
Error connecting to Essbase Server when running business rules
We recently migrated from v9.3 to v11.1.1.3. I have two users with Administrative access who need to run business rules on a native Essbase application, but cannot. They get the message 'Error connecting to Essbase Server'. They get this message when trying to set this execution database. They can't even expand the server to see the list of applications. I have tried deprovisioning them in Shared Services, refreshing security, then adding it all back in and refreshing again, but it doesn't work. My own id has identical access to that which I'm granting them, and I have no problems. I even created a native user with the same access and it works as well. No matter what I do, I cannot get these two users to be able to run their business rules in EAS.
We also have a Planning application, and the Planning Administrative user has the same issue. However, this user is able to get around it by running rules using the Planning connection rather than the Essbase connection. She has the same issue of not seeing anything under the Essbase Servers when trying to set the execution database though.
In version 9, we were not using Shared Services for Essbase security. Unfortunately our consultant chose to set it up using Shared Services security when migrating, and according to the documentation, one cannot go back to using Native Essbase security.
I also tried running the Externalize Users wizard and the three users with issues failed to externalize. My own id did, and the native user I created succeeded.
Has anyone experienced an issue like this or have any ideas on how to resolve?
Thanks,
SabrinaFollow up - Oracle has finally resolved this. It's so simple, yet no one thought to check until now. The three users with problems all have mixed case user id's in ldap. They have always logged into EAS with all lower case ids. In version 9, on native security, this was never a problem. But in version 11 using Shared Services (not sure which factor changed it), it doesn't work. The simple solution is to log in with their exact mixed case user ids. It only took Oracle three months and the creation of a bug issue to figure this out for us.
Sabrina -
HBR Error connecting to Essbase server
Hi,
Getting an error " HBR Error connecting to Essbase server" while selecting the outline in create new business rule.Tried the below workaround,but still getting the same error.
* Copy the HBRServer.properties from AAS (<HyperionHome\Hyperion\AdminServices) to the Planning Server
(<HyperionHome\Hyperion\HyperionPlanning\AppServer\InstalledApps\...)
* Restart the services.
* Login to Hyperion Planning application. Connect to each application at issue to establish RMI connection.
* Log into AAS, Refresh security from Shared Services
Any solution/ workaround could be of very helpful.Hi,
Are you trying to create a business rule for planning or essbase, the error message you have posted is for trying to connect to essbase and you usually get that message if essbase is not started or unreachable.
Cheers
John
http://john-goodwin.blogspot.com -
"Connection failed ... There was an error connecting to the server"
Hi,
I have a late-2009 imac, running Snow Leopard and all the latest updates.
However, since ugrading to ilife '09, I now see the following error
"Connection failed
There was an error connecting to the server
"BeechMac". Check the servername or IP address and then try again"
However, "Beechmac" was the name of the older G4 Mac from which I upgraded (using Time Machine) to the imac last year - and it no longer exists on the network.
As a test, I copied over to this Mac Mini (also latest OS and updates) all the iphoto directory prior to update and then updated to ilife '11 - same problem is seen.
I assume some files have some form of symbolic links to a networked partition ?
The only difference to my network/system has been updating to ilife '11 - and all I use is iphoto.
However, the error pops up every hour or so - and the mouse disappears and its tricky to gain mouse focus again to remove the message.
I've scoured the Internet - but no help.
- PaulI think I've identified the problem (or at least a solution).
There were broken Alias links for some of the photos in my iphoto directory.
I navigated Finder to the root of my iphoto collection and searched for "Kind: Alias"
I then checked (using Right-Click:"Get info") that the Alias was working (if not a broken Jpeg icon was shown), and if not fixed up.
It appears that in my system moves from taking photos from PC onto my original G5 Mac and then into iphoto (which had two partitions) some of the files had been aliased rather than copied. (Not sure exactly how this happened).
Anyway, I was able to repair the broken file by going into the Terminal and copying the required JPEG onto the Alias.
I wish there was an easier way to find broken Aliases - it was fairly tedious.
- Paul -
Error connecting to planning server from EAS
We implemented Hyperion Planning about 1 month ago. We are having this intermittent issue with connecting to Planning servers. When the users attempt to add a Business Rule, they select an outline, and browse to the planning servers. When they click one of the two servers they get the message "Error connecting to Planning server <<Server A>>". The message only happens on Server A.
I check the planning service, it is running. I login directly to the planning application (http://<<Server A>>:8300/HyperionPlanning/) , it works fine. However I still get the error. The problem comes and goes, but once is happens the only solution seems to be restart all of the services on the Planning server.
Is anyone experiencing this issue?
If so is there a resolution? Is this a common thing with Hyperion Planning?
I opened a TAR, but because the issue is only happening occasionally (1 day in 5) I thought I would try the forums. Any help or suggestions would be appreciated.Hi,
What version of planning are you running, there was patch 9.3.1.1.1 that addressed
6636367 (8-665086601) When the Business Rules connection to the relational database is lost, Business Rules does not reconnect to it. To solve this problem, an optional property, HBR_CONNECTION_VALIDATE_TIME, was added to HBRServer.properties. This property specifies a time interval for checking the connection between Business Rules and the relational database. If the connection is not valid, a new connection is established. The time interval is specified in milliseconds and defaults to 300,000 (five minutes).
This maybe the same sort of issue you are experiencing.
Cheers
John
http://john-goodwin.blogspot.com/ -
Recieving Error connecting to Planning server when validating BusinessRule.
Hi,
I am recieving an error when validating business rules.
Internal error connecting with given connection information. Get details for more information.
When I click on Get Detail I see the below information.
Details:Error connecting to Planning server xxxxxx.
Details:Exception occurred. Please check your log file for details.
I do have one more issue I cannot access Applications through Web. Recieving the following error Unsuccessful Logon Check Log for details.
Hyperion Planning Version is 9.2.
Please help.
Thanks.
Edited by: user8887080 on Aug 18, 2010 1:39 PMI recommend logging into My Oracle Support and having a read of doc id - 763345.1
It goes through different options for resolving business rules issues.
Though you will need to be able to log into your planning applications first, make sure all your connection information is correc e.g. the connection details to the relational databases.
Cheers
John
http://john-goodwin.blogspot.com/ -
HBR running error (Urgent, please help) Error connecting to Essbase Server
Hello All Expert
When running business rule either from Planning Web (Planning 9.3.1.1.8) or EAS, sometime there will be a error "Error connecting to Essbase Server" appear.
After the error appear, all the can't be run.
But after a while, problem may disappear and all the rules can be run.
Anyone having this problem before, please help
EricI am actively using the EAS, but the error is suddenly come that I think I am not logout by server
Maybe you are looking for
-
How can I get Firefox to directly open a file (like a torrent) without saving it at all
It seems that up until about 3 months ago - I could get firefox to download a file and open it directly without saving it to any particular place. This is particulary useful for downloading say a torrent or, for that matter, any other file I wish to
-
Hi, I'm having problems with a select that return rows running as the owner of tables used in select. But if I run the same select as a different user with select privs on tables used in select, the same query does not return any rows. Any suggestion
-
DECODE Vs CASE Performance Issue
Hi, The comparison is on basis of performance. There are billions of records to be processed and millions to be updated. Please go through the folowing queried to have general idea because the actual query is 2 page long. DECODE(EXP,1,VAL1,VAL2) Vs C
-
Autostart java application at system start / logon
Hello I wonder if there is a class dealing with autostart of programs? My problem: I'd like to have my application started when the user logs on the computer. The user shall be able to choose if he wants this (register autostart) or not (remove autos
-
Custom views in BEA weblogic portal
How to create custom views, can anyone help me or reffer me to some Document or example Thanks in advance