Error Connecting to SLD, while CC integration with ECC 6.0

Dear All,
I am using the CC v and from ECC IDES. I cannot connect to the SLD. It is giving an Error.
When I try to register the Server Programs in Vis Admin and click the SET button I am getting an error "Error Adding Bundles". In the ABAP part I am getting the same error of RFC connection.
Now from ECC when I do a SM59, and then goto TCP/IP connections, on creating this connections I cannot make them UNICODE as the R3 system is Non-Unicode. So these dont work.
What am I supposed to do.
Please let me know. This is very urgent and useful replies will be awarded full points.
Thanks and Best Regards
Chakra and Somnath

Replying to this old post hoping for some answers.
We had researched this and converted to Integrated ITS using our ZCATW over a year ago. The notes read that while integrated ITS is a suppoted platform, ESS scenarios for which newer technology exists are no longer supported. We tested ZCATW under ECC5 and decided to move forward because of a pending technical upgrade. We are now in the middle of the technical upgrade and wishing to keep it technical we are trying to keep ZCATW going and then look at the newer components as a seperate project. Has anyone found a way to overcome the above issue in CATW/ECC6?
Thanks,
Doug

Similar Messages

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

CRM 3.0 integration with ECC 6.0

Hi all, I wanted to confirm if CRM 3.0 can be integrated with ECC 6.0
If yes, then which support pack,etc. will be applicable and what all issues could be encountered in integration?
Thanks in advance.

Hi Animesh,
just to be clear.
the CRM and the backend ECC60 are communicating via Plug -ins
you can read more information here
http://service.sap.com/r3-plug-in
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000601131&
The other SP level of the systems (BASIS etc.) are independent.
Once you could conect the systems at basis level. You can begin your work at
Application level.
Whether you can have problems here please ask the CRM Gurus in a separate therad in other forum.
I Hope I have answered all of your questions.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Getting error "Error connecting to MDEX" while trying to open micro browser

Hi,
I am using endeca Tools and framework 3.1.0 and MDEX 6.3.0.
While trying to open micro browser from Workbench UI to create page template configurations,I am getting following message in popout:
Error connecting to MDEX. The data service associated with this editor is not correctly configured.
Please guide the if you have any clue.
Thanks,
Mayank Batra

I have successfully configured RecordSpotlight editor to use a different endeca instance. What I did is modify apps\[your app name]\config\editors_config\services\dataservice.json file with updated endeca search configuration, save the file, and run apps\[your app name]\control\set_editros_config.bat to apply the change.
To verify, you can run apps\[your app name]\control\export_site.bat command to export your site configuration, the updated data service config should show in the site xml file exported.
Hope it helps,
Michelle

Sourcing integration with ECC using PI (percentage rebate scenario)

Hi Experts,
Sourcing - OP 7
ECC - configurations done for rebate conditions as mentioned in standard configuratin guide
PI - SP02 patch 0
We are publishing percentage rebates in Master agreement from sourcing to ECC to create Online Agreement using standard predelivered content for PI from SAP, however ECC returns error in RFC response mentioning
No currency code found for ISO code P1 in field HEADER_CONDITION/CURRENCY_ISO
I checked PI content & I see for % rebates, field HEADER_CONDITION/CURRENCY_ISO is always populated in PI with P1.
What are the next steps to be done in ECC or in PI to overcome the mentioned error.
Any pointers will be appreciated, Thanks.

Hello Jeet,
I would suggest to check first that in both your SAP ERP and SAP Sourcing an ISO Code P1 for percentage exists. Further I would check if a rebate with an absolute amount works fine (also create multiple amounts and check if a scale is created in ERP, just to ensure that it works in general). E.g. check if the price condition/condition type exists and is configured correctly in ERP.
If that all looks good you might want to check the ERP transaction BBP_ES_ANALYZE. I recently created a SDN blog about some tips and tricks, it also explains this transaction, please see ERP integration with SAP Sourcing tips and tricks Maybe the error message(s) in this transaction will help you to better understand what is going on.
Hopes that will help you
Markus

CRM2007 integration with ECC 5.0

Hi All,
Will appreciate if someone can send a document or link that can help me with ECC5.0 and CRM 2007
Regards,
Suren

this is copied from the installation guide
Prepare an OLTP Backend System:
n SAP R/3 or R/3 Enterprise systems as well as ECC 5.0
systems require the R/3 Plug-In 2004.1 with at least
SP10.
See SAP Note 704564 (R/3 plug-in:PI 2004.1
installation/delta upgrade) and SAP Service Marketplace at
http://service.sap.com/r3-plug-in
n As of SAP ECC 6.0, the R/3 Plug-In is no longer
required. New and extended interfaces for integrating
SAP ECC 6.0 are directly contained in SAP ECC 6.0.
[SAP ERP 6.0 <Technology> on <Operating System>: Database
then it should be done as with any OLTP system.
I've done a connection to a R/3 Enterprise 4.7 system and that worked fine.
Follow the Best Practices documenation and you will be fine!
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm

Integration with ECC 6 and Xcelsius

Hi,
I would like to know if its possible to integrate Xcelsius directly with an ECC report.
For example, take the ALV data and 'send' it to Xcelsius in order to have an Xcelsius report.
I know that Xcelsius has (now), built in integration with BW queries, but wonder if that is proprietary with BW, or can the concept of integrating a report from BW work in ECC?
Please advise.
Thanks.
JP

Hi,
in case you would like to build an Xcelsius dashboard on top of ERP data you can use Crystal REports to connect to the ERP system (see here: /people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4) and then you can use Live Office to connect Xcelsius to a Crystal REports objects. see here:
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
In regards to an ALV - there will be an integration with Crystal Reports but not for Xcelsius and keep in mind that an ALV is a push model and is only available when the transaction is been executed.
Ingo

SAP XI 2 BI Integration with ECC 6.0

Dear all,
we are planning to do XI integration between ECC 6.0 to BI
1) How to Get the BI Standard data from ECC 6.0?
2)We are planning to integrate Standard BI reports with ECC 6 0 through XI.
Please sugget the scenario for integration between ECC 6.0 to BI through SAP XI.
Thanks In Advance.
Mahesh

Hi Mahesh,
Please go thru these links
To push data from BW to XI, please check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20push%20data%20into%20bw%20from%20xi.pdf
To send data from XI to BW please check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw%20via%20xi.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
XI-BI Integration unsing RFC
Pushing data from BI to XI using RFC Adapter
https://forums.sdn.sap.com/click.jspa?searchID=17734474&messageID=5878682
Thanks,
Shweta

Steps: SNC (Supplier Network Collaboration) Integration with ECC through XI

Hi,
Has anyone worked on the SNC(Supplier Network Collaboration) integration with SAP ECC via SAP XI.
Could you pls share any documentation related to this. And also could anybody tell me the setup required to go ahead with the integration.
Thanks,
S

Hi Xavier,
SNC integration with XI has predefined mappings. So ask your basis guys to download the XI content for SNC using with PI. Once they deployed you will have a builtin predefined content in XI. Within the predefined content mostly they all are xsl mappings.
If your requirement is with the standard idocs then you can use them directly. Else if their is customization they you may need to change the mappings according to your requirements.
Also check this help:
http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm
Regards,
---Satish

Pro/E integration with ECC 6.0

I want to integrate Pro/E with ECC 6.0 in order to transfer/exchange engineering data such as materials, BOMs, engineering changes, documents, etc.
Does anyone know of Pro/E functionality or a 3rd party product that does this sort of thing?
Kind regards,
Rex L. Farris

A direct interface is developed by .riess GmbH and SAP. It is SAP certified and supported by SAP.
For more information,
Go to <a href="http://service.sap.com/plm">http://service.sap.com/plm</a>
Life-Cycle Process Support -> Product Development -> Integration -> MCAD Integration -> Pro/ENGINEER

C4C integration with ECC 5.0

Guru,
My company is looking for implementing cloud for customer, but our backend system is running on ECC 5.0.
SAP had strongly recommended us to upgrade our ECC before implementing C4C project.
Through some reading, it seems that integration prerequisite is ECC has to be version 5.0
Or there is any workaround to integrate (standard integration) C4C to ECC 5.0 through HCI? Like by applying or enhancing standard iflow that released for ECC 6.0?
Thanks.
Cheers,
Jim

Not sure where you have read that ECC 5.0 would be supported. The official SAP position is summarised in the table below. You can clearly see that some functionalities even depends on what EHP level you are at with ECC 6.0.
SAP PI and HCI leverage the same iFlow content.

Supplier Registration in ESourcing ( Vendor integration with ECC or MDM )

Hi All,
SAP ESourcing has the functionality of Supplier Registration. As per the functionality, Supplier will provide all the required information in the registration form. The Supplier form will go for approval to the Buyer / Purchaser. Once approved, the supplier will considered for RFx event. My questions are :
1 :Is there OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with ECC so that system will automatically create new vendor in ECC.
2 : Is there OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with MDM (Master Data Management system ) .
Please through some pointer on this ?
Regards,
Kalandi

Hi Kalandi
For your first question, if you deploy standard integration package provided by SAP for e sourcing-ECC integration, you can replicate approved e sourcing vendor to ECC using standard script (I think script name is "Publish to ECC" ).
In case you prefer a custom option,you can write a customized script to get a flat file (.CSV) download of e sourcing vendor whcih can be used to update ECC
As far as OUT OF BOX standard solution provided by SAP for integration of newly Approved supplier / vendor of ESourcing system with MDM (Master Data Management system ) is concerned, there is no standard solution provided by SAP but again since it is possible to get a CSV export of vendor field, it can be used to update MDM as well
Hope this helps!
Regards
Mudit Saini
Edited by: Mudit_UCB on Jun 28, 2011 1:20 PM

Error on role import for SAP integration with BO in CMC (3.1)

Hello,
We are trying to integrate existing BO environment in our company with existing BW installation.
BO Environment - 3.1
BW/ECC Environment - (BW - BI 7.0 SP20, ECC 6.0)
So got the pre-requisites completed and the transports imported into both BW and ECC environments. Upon these steps we went ahead and installed the integration kit for 3.1 system.
There were no error messages, after we completed the installation went into infoview and in the authentication drop down checked to see if I can get "SAP" in there....which it did. So, I am assuming there were no issues till this point which we might have missed out.
Upon this, when I went into SAP authentication in CMC and double clicked on SAP and in the next screen clicked on "NEW" and added in the application server, system number, id and password and updated it...this automatically updated the logical system.
But when I go into the role import, it gives me the following error message....
Exception in JSP: /jsp/auth/sapsec_import_role.jsp:22:19:20: <%21:string context::secSAPR3ImportRoleBean.getContextPath():22: secSAPR3ImportRoleBean.init(request):23:response.setHeader("Expires","0"):24: 5> Stacktrace:
The only thing is we have not assigned the CRYSTAL_ENTITLEMENT role to it as we are at this point only trying to see if we can log into webi...
So, is it required to assign this role to an existing user id role in order for me to import the roles into BO CMC screen in order to be assigned to a group.
Can you please help me out on this.
Thanks
Dharma.

Hello Ingo,
Thanks a lot for looking into the question.
Yes, we are taking about the SAP Authentication part where I am trying to import roles in SAP into BO after I provide the login information in the Entitlement systems tab.
I confirmed that all parts of Java Connector configuration were taken care of as mentioned in the installation manual and from your blog.
The only piece left off is the CRYSTAL_ENTITLEMENT role assignment to the id which is used within the entitlement systems tab in CMC. I will get this configured and try it one more time.
Just to confirm,
1. The new user id to be created (should it be a RFC user or dialog user)
2. Is the only role to be assigned to the new user is CRYSTAL_ENTITLEMENT with the authorization mentioned in the installation manual
3. What are the roles to be imported into BO within CMC (are these the roles which we want for data access)
4. When a user tries to login with any other user id other than the one listed in Entitlement systems tab, does it use the roles assigned to that person in SAP to retrieve the data or would it be dependent on the roles imported into BO within CMC in earlier step.
Please let me know.
Thanks
Dharma.

Error message after update while creatin equipment with BAPI

Hi All,
I'm creating equipment master record with BAPI 'BAPI_EQUI_CREATE'. After commit I receive the following error message in my inbox -
Update was terminated
System ID....   ***
Client.......   ***
User.....   ***
Transaction..   Z***
Update key...   4AD49ADAF8E13020E10000000A701B19
Generated....   15.10.2009, 16:44:33
Completed....   15.10.2009, 16:44:33
Error Info...   Error while determ. loc. crcy: exchange rate type date from to
Who knows what's the reason and how can it be fixed.
Thanks in advance,
Kind Regards,
Nikolai.
Edited by: Nikolai Gurlenia on Oct 16, 2009 2:18 PM

Hi ,
Try to run the transaction and post the record manually and see how it behaves.
Contact your functional consultant and check with them if they recently made some config changes
Thanks
Ramya

Getting error connection timed out while invoking webservice from bpel.

Hi,
I am trying to call a secure webservice developed in .Net having extension .svc from the bpel service and in response i am getting error
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect</summary>
I am able to call this web service from the java programme using HTTPClient by setting the username/password and soapaction in http Header but not from the BPEL process. This .Net service is synchronous in nature. I also set the proxy in opmn.xml but didn't got any success.
Please reply me ASAP. Need urgent help.
Thanks.

Are you working on 11g ? if this is 11g
How are you invoking the webservice ...does it have any authentication..
If the webservice which you are invoking has basic http authentication...
1. In the composite.xml file, right click on the reference and configure WS policies. In security tab, add a security policy named"oracle/wss_http_token_client_policy"
2. Add two binding properties for the reference
(i) oracle.webservices.auth.username
(ii) oracle.webservices.auth.password
and provide the username and password for those two properties...
Just try this out...
Thanks,
N

Error Connecting to SLD, while CC integration with ECC 6.0

Similar Messages

Maybe you are looking for