Error connecting to the host machine

Hey guys.
From the GC, when I want to my db, it ask me to enter the hostname and password before continue.
the oracle db is running on a windows machine not connected to a domain.
the username and password are correct but ai have this error.
Can any one help?
NB: Incase am connected to a domain, what to do too?
Thanks
DID
Error Message
RemoteOperationException: ERROR: Invalid username and/or password
Startup/Shutdown:Specify Host and Target Database Credentials
Specify the following credentials in order to change the status of the database.

For Host Credentials Setup - NOT connected to a Domain:
username = user_name
password = pass_word
For Host Credentials Setup - connected to a Domain:
username = domain\user_name
password = pass_word
For Database Credentials Setup:
username = database_user_name
password = database_user_password
For Enterprise Manager logon Screen prompt
username = sysman
password = sysman_password
For Database logon Screen prompt
username = sys (or any database_user_name)
password = sys_password (or any database_user_password)

Similar Messages

CRS 5 Backups fail with this error: Unknown error occured while connecting to the host

Dear All,
We have backup issue with UCCX 5.0(2)SR03_Build317, while trying to take backup giving following error "Unknown error occurred while connecting to the host".
I have found the solution in the Cisco and tried all the suggestion, still not working and same error observed. Due to backup issue we unable to do any changes on the CRS, when we try to create new agents, those agents are not reflecting in the CRS.
Also I have observed bellow error , when try to re-sync the JTAPI,
Error while handling the input   request.
Top of Form
Config Changes are not allowed during 'Backup' operation, which   was started by 'Scheduler' at 'Fri Jun 08 18:00:03 GMT+08:00 2012 '. Please   try again after 'Backup' is complete.
Bottom of Form
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00809a752c.shtml
Solution
Complete these steps in order to resolve this issue:
•1.      Access the UCCX server and navigate to Start > Run, and type CET.
•2.      When the warning message appears, click NO.
•3.      Choose com.cisco.crs.cluster.config.ArchiveAdminConfig.
•4.      On the right side, double-click the record ID.
•5.      Click the com.cisco.crs.cluster.config.ArchiveAdminConfig tab, and clear the password under Backup Storage.
•6.      Click Apply.
•7.      Navigate to Appadmin > Tools > Backup and Restore.
•8.      Under Backup Storage Location, type the new password, and click Update.
After you complete these steps, you can run the backup. If the backup fails, restart the server, and try the backup again. If the backup still fails, you can navigate to CET, clear all the fields, and then type the new information for the storage location.
Please help me with your suggestions.
Thanks & Regards,
Naveen .S

Please any one help me on this issue..

Error connecting to the SAP SRV on Windows 2008 Server platform

Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani Dlamini

Hi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy.

Java.sql.SQLException: The TCP/IP connection to the host has failed.

Hello. I hope you had a happy new year! Now its back to work.
I am having a problem connecting to a remote SQL Server DB. I am using NetBeans 5.5 and the latest J2EE. I am able to see the tables in the IDE and bind objects to data. But when I run it it gets this:
java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: no further information
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:100)
at com.sun.sql.rowset.internal.CachedRowSetXReader.connect(CachedRowSetXReader.java:344)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:126)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:968)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1428)
I checked the SQL Server Configuration manager on that machine and TCP/IP connections are allowed. What else could be wrong?
Thank You.

"Connection refused" means that the client sends a packet saying "I would like to connect to port number NNNN please" to the server computer, and the server computer's OS sends the reply "there is no process listening to that port on the network interface you are using".
The database server is not running, or running but not listening to TCP/IP connections, or at a different port from what you think, or listening to only selected network interfaces (it is possible for a process to listen to a specific interface or a wildcard for all interfaces). A less likely scenario is that a firewall is sending the "connection refused" message.
First aid check list for "connection refused":
- Check host name in connect string.
- Check port number in connect string.
- Try numeric IP address of server host in connect string, in case name server is hosed.
- Are there any firewalls between client and server blocking the port.
- Check that the db server is running.
- Check that the db server is listening to the port. On the server, try: "telnet localhost the-port-number". Or "netstat -an", there should be a listening entry for the port. You need to configure the database to accept TCP connections; the server documentation or google should explain how.
- Try "telnet server-host-name the-port-number" from the client, to see if firewalls are blocking it.
- If "telnet" fails: try telnet with the numeric ip address.
- If "telnet" fails: does it fail immediately or after an obvious timeout? How long is the timeout?
- Does the server respond to "ping serverhost" or "telnet serverhost" or "ssh serverhost"?

Telent:could not open connection to the host on port 23 connect failed

Hi,
How to run commands of OEL5 host OS from windows XPP virtual machine(Vmware Player) on standalone desktop PC?
While runing the telnet command on windows XPP virtual machine it's gives error
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>cd\
C:\>telnet 192.168.1.2
Connecting To 192.168.1.2...Could not open connection to the host, on port 23: Connect failed
C:\>
Thanks
Regard
GSM

user9230833 wrote:
Launcher means shortcut to execute any file which is inside folder in Linux.Launcher are created on desktop to execute by one click of mouse.You need to create a command file that contains the required instructions to run putty with whatever relevant command line switches in order to start the remote program/process on Linux.
For example, you have a trusted ssh connection (no password prompting) between your Windows account and the Linux vmware account. You need to execute command line +/home/vmware/bin/vmstart myVM+ on Linux.
Your command file in Window will look something as follows:
@echo off
"c:\program files\putty\pssh.exe" vmware@my-linux-server "/home/vmware/bin/vmstart myVM"Once you've create this command file (.cmd file extention), you can create a desktop shortcut for it and assign an icon to it.
However, first test the command file via an interactive console session to ensure it works. Also, I'm not sure you can script telnet using putty - but putty's ssh does support the standard ssh command line and one can execute programs/commands on the remote server in this fashion.
Setting up trusted ssh connections is also important as passwords is a weak security mechanism. It requires a secret to be used and coded into scripts/software that needs to be authenticated.
With ssh you generate a public/private key combination, and provide the public key as unique identifier for your o/s user and platform to a remote server (e.g. Linux). This now enables your platform and o/s user to be authenticated via the privatre/public key pair when your platform establishes a connection with the server.
In putty, generate a ssh key (RSA). Copy and paste the public key into the Linux server account's "+home/vmware/.ssh/authorized_keys+" file. Make sure that the +.ssh+ directory and key have user read/write permissions only. And that's it - no password needed by your account to ssh into the Linux server account. No secrets that need to be kept secret (and that can be stolen and used from any other platform to gain access).

AppController not connected to the host hyper-v

I had previously installed and running properly AppController.
I recently updated scvmmr2 to ru 5, but after install ru 5 AppController not connected to the host hyper-v.
when the connection is still there.
What should I do to fix this problem?

Hi,
If you haven't already, you will need to apply the VMM Administrator Console UR5 update on the App Controller server.
App Controller only connects to Hyper-V hosts when displaying a console of a virtual machine. For all other features App Controller connects to the VMM Server.
Is it VMM or Hyper-V that App Controller is not able to connect to?
Are you seeing any error message, either on the screen or in the event log?
Does the VMM Admin console on the App Controller server work?
Regards
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Telnet not working i need help : Could not open connection to the host !!

hello all im back today with big problem with telnet i dont know why !!
i have to computers one of them in my home and the other one in my office both of them use windows 7 so
home PC internet IP : 82.205.100.161
office PC internet IP : 82.102.237.175
so i go to control panel and then to windows features and i check Telnet Client and Telnet server
then i turn off my firewall
then i start telnet service
then i execute netstat -ab to know telnet port :
[tlntsvr.exe]
TCP [::]:135 Hacker-HP:0 LISTENING
is there anythink i need to do to get that damn connection over internet NOT LAN !! pleaze help me i still get this sucks error : Could not open connection to the host
peace
Dr.BL@CKDeaTH

Hi,
Telnet server use TCP port 23 by default.
Here is a screenshot of my lab server,
To verify if the TCP port 23 has been opened, we can use the portqry tool.
Here is the download link,
http://www.microsoft.com/en-us/download/details.aspx?id=17148
Best Regards.
Steven Lee
TechNet Community Support

Could not open connection to the host, on port 23: Connect failed

Can anyone please help with this telnet problem on CISCO 877 ADSL Router
I am trying to telnet into my ISP Router remotely using public IP which has been dynamically assigned to the router by the ISP.
I can Ping the Router and I can also go out to the internet on that router but, I can not telnet into that router from Inside the Network nor Outside the Network. There are no Firewalls involved.
I have tried to clear the config and reconfigure it again, it does not help, I have also applied same config on another CISCO 877 ADSL Router it still does not work.
ERROR i get on the Command Prompt: Could not open connection to the host, on port 23: Connect failed
I have shown some of the Show Run out put below if that helps,
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit x.x.x.x 0.0.0.7
dialer-list 1 protocol ip permit
line vty 0 4
password 7 ***********
login
Manny Thanks
Punit

Find Below the Requested Sh run outputs
ADSL-ROUTER1#sh run | beg line vty
line vty 0 4
password 7 ***********
login
scheduler max-task-time 5000
end
I have removed the IP for security reasons
ADSL-ROUTER1#sh ip route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
     x.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
S       x.x.x.x/29 is directly connected, Vlan1
C       x.x.x.x/32 is directly connected, Dialer0
     x.0.0.0/32 is subnetted, 1 subnets
C       x.x.x.x is directly connected, Dialer0
S*   0.0.0.0/0 is directly connected, Dialer0
I also keep getting the message below on the console done know if this is part of the problem
Mar 13 07:17:32.213: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Vlan1: the fragment table h
as reached its maximum threshold 16
Hope this output helps
Thanks

The TCP/IP connection to the host 127.0.0.1 , port 1433 has failed

hi all,
i am using SQL2005 server as my database server. i am trying to connect this server in java (i mean using JDBC). i am using windows authentication to connect my sqlserver.
i have the url connection like this
DriverManager.getConnection("jdbc:sqlserver://127.0.0.1\\SQL2005/database name",username","password");
i am trying to connect the server using the above URL, but i couldn't connect it throws an error as the following.
The TCP/IP connection to the host 127.0.0.1 , port 1433 has failed. Error: "Connection refused: connect. Verify the connection properties, check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, and that no firewall is blocking TCP connections to the port.".
could anyone plz help me to make the connection in right way.
i have tried to ping via telnet as well, even telnot not able to connect
plz help me...
thanks

Hi,
Besides Madhu mentioned, please check the TCP/IP port number of the instance of SQL Server.
1. Open SQL Server Configuration Manager, and then expand SQL Server 2005 Network Configuration.
2. Click Protocols for InstanceName, and then make sure TCP/IP is enabled in the right panel and double-click TCP/IP.
3. On the Protocol tab, notice the value of the Listen All item.
4. Click the IP Addresses tab:
If the value of Listen All is yes, the TCP/IP port number for this instance of SQL Server 2005 is the value of the TCP Dynamic Ports item under IPAll.
If the value of Listen All is no, the TCP/IP port number for this instance of SQL Server 2005 is the value of the TCP Dynamic Ports item for a specific IP address.
5. Make sure the TCP Port is 1433.
6. Click OK.
If there are any more questions, please let me know.
Thanks.
***Xiao Min Tan***Microsoft Online Community***

"Connection failed ... There was an error connecting to the server"

Hi,
I have a late-2009 imac, running Snow Leopard and all the latest updates.
However, since ugrading to ilife '09, I now see the following error
"Connection failed
There was an error connecting to the server
"BeechMac". Check the servername or IP address and then try again"
However, "Beechmac" was the name of the older G4 Mac from which I upgraded (using Time Machine) to the imac last year - and it no longer exists on the network.
As a test, I copied over to this Mac Mini (also latest OS and updates) all the iphoto directory prior to update and then updated to ilife '11 - same problem is seen.
I assume some files have some form of symbolic links to a networked partition ?
The only difference to my network/system has been updating to ilife '11 - and all I use is iphoto.
However, the error pops up every hour or so - and the mouse disappears and its tricky to gain mouse focus again to remove the message.
I've scoured the Internet - but no help.
- Paul

I think I've identified the problem (or at least a solution).
There were broken Alias links for some of the photos in my iphoto directory.
I navigated Finder to the root of my iphoto collection and searched for "Kind: Alias"
I then checked (using Right-Click:"Get info") that the Alias was working (if not a broken Jpeg icon was shown), and if not fixed up.
It appears that in my system moves from taking photos from PC onto my original G5 Mac and then into iphoto (which had two partitions) some of the files had been aliased rather than copied. (Not sure exactly how this happened).
Anyway, I was able to repair the broken file by going into the Terminal and copying the required JPEG onto the Alias.
I wish there was an easier way to find broken Aliases - it was fairly tedious.
- Paul

The TCP/IP connection to the host localhost, port 1433 has failed.

Hi, im using sql server 2000,
i have declared this in my program:
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String url = "jdbc:sqlserver://localhost:1433;databaseName=Factura";
Connection conn = DriverManager.getConnection(url,"sa","");and is giving me this exception:
run:
Got an exception!
The TCP/IP connection to the host localhost, port 1433 has failed.
Error: "connect timed out.
Verify the connection properties,
check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port,
and that no firewall is blocking TCP connections to the port.".
com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host localhost, port 1433 has failed.
Error: "connect timed out. Verify the connection properties,
check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port,
and that no firewall is blocking TCP connections to the port.".
        at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:171)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1033)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:817)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:700)
        at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:842)
        at java.sql.DriverManager.getConnection(DriverManager.java:582)
        at java.sql.DriverManager.getConnection(DriverManager.java:185)
        at factura.FacturaView.conexion(FacturaView.java:317)
        at factura.FacturaView.jTextField1KeyPressed(FacturaView.java:268)
        at factura.FacturaView.access$900(FacturaView.java:41)
        at factura.FacturaView$5.keyPressed(FacturaView.java:150)
        at java.awt.Component.processKeyEvent(Component.java:6225)
        at javax.swing.JComponent.processKeyEvent(JComponent.java:2801)
        at java.awt.Component.processEvent(Component.java:6044)
        at java.awt.Container.processEvent(Container.java:2041)
        at java.awt.Component.dispatchEventImpl(Component.java:4630)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1850)
        at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:712)
        at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:990)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:855)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:676)
        at java.awt.Component.dispatchEventImpl(Component.java:4502)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Window.dispatchEventImpl(Window.java:2478)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
BUILD SUCCESSFUL (total time: 34 seconds)how can i solve this?
thanks..
Edited by: derok on Dec 8, 2010 1:31 PM
Edited by: derok on Dec 8, 2010 9:14 PM
Edited by: derok on Dec 11, 2010 1:51 PM
Edited by: derok on Dec 11, 2010 1:52 PM

tschodt wrote:
derok wrote:
1434 did not worked eitherWhat port is your SQL Server listening on?
List of active ports:
C:\> netstat -naboOn linux I would add -l and -t to only get listening TCP ports.netstat -nabo gave me this:
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       2004
[httpd.exe]
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       1148
e:\windows\system32\WS2_32.dll
E:\WINDOWS\system32\RPCRT4.dll
e:\windows\system32\rpcss.dll
E:\WINDOWS\system32\svchost.exe
E:\WINDOWS\system32\ADVAPI32.dll
[svchost.exe]
TCP    0.0.0.0:443            0.0.0.0:0              LISTENING       2004
[httpd.exe]
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
[System]
TCP    0.0.0.0:2869           0.0.0.0:0              LISTENING       1528
E:\WINDOWS\system32\httpapi.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\RPCRT4.dll
[svchost.exe]
TCP    0.0.0.0:3306           0.0.0.0:0              LISTENING       2428
[mysqld.exe]
TCP    0.0.0.0:4400           0.0.0.0:0              LISTENING       2592
[nlsvc.exe]
TCP    0.0.0.0:7511           0.0.0.0:0              LISTENING       204
[raysat_3dsmax2010_32server.exe]
TCP    127.0.0.1:1028         0.0.0.0:0              LISTENING       3080
[alg.exe]
TCP    127.0.0.1:5152         0.0.0.0:0              LISTENING       188
[jqs.exe]
TCP    192.168.0.101:139      0.0.0.0:0              LISTENING       4
[System]
TCP    127.0.0.1:5152         127.0.0.1:1163         CLOSE_WAIT      188
[jqs.exe]
TCP    192.168.0.101:2869     192.168.0.1:4563       CLOSE_WAIT      4
[System]
UDP    0.0.0.0:500            *:*                                    908
[lsass.exe]
UDP    0.0.0.0:445            *:*                                    4
[System]
UDP    0.0.0.0:4500           *:*                                    908
[lsass.exe]
UDP    0.0.0.0:1434           *:*                                    3036
[sqlbrowser.exe]
UDP    127.0.0.1:123          *:*                                    1284
e:\windows\system32\WS2_32.dll
e:\windows\system32\w32time.dll
ntdll.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    127.0.0.1:1135         *:*                                    3508
[iexplore.exe]
UDP    127.0.0.1:1040         *:*                                    1284
e:\windows\system32\WS2_32.dll
E:\WINDOWS\system32\WINHTTP.dll
E:\WINDOWS\system32\upnp.dll
E:\WINDOWS\system32\RPCRT4.dll
E:\WINDOWS\system32\ole32.dll
[svchost.exe]
UDP    127.0.0.1:44301        *:*                                    2880
[PnkBstrA.exe]
UDP    127.0.0.1:1900         *:*                                    1528
e:\windows\system32\WS2_32.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\ADVAPI32.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    192.168.0.101:1900     *:*                                    1528
e:\windows\system32\WS2_32.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\ADVAPI32.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    192.168.0.101:137      *:*                                    4
[System]
UDP    192.168.0.101:123      *:*                                    1284
e:\windows\system32\WS2_32.dll
e:\windows\system32\w32time.dll
ntdll.dll
-- unknown component(s) --
[svchost.exe]
UDP    192.168.0.101:138      *:*                                    4
[System]Edited by: derok on Dec 10, 2010 11:04 AM
Edited by: derok on Dec 10, 2010 11:11 AM

The TCP/IP connection to the host has failed.

Hi everyone;
I have project with Java and Sql server 2000.My application server is Jetty.I work this tool successfully in Windows 2000 Server but I cant in XP Pro Service Pack 2.I take this message :
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
My Sql Server TCP/IP enabled and port 1433.There is problem here.Because I cant connect 1433.I tried this command.
telnet localhost 1433 .It is failed.I tried to open this port in firewall.Still problem is continue.
I am waiting for ur answer...

please help me by giving the solution.Help yourself by fixing the connection settings OR your network. The error is very clear: no connection can be made to the database. So what could it be? Wrong IP? A firewall is blocking you somewhere?
Nobody can tell you, you are the only one with access to your server settings and network environment.

IChat: "The connection to the host was unexpectedly lost"

I have I will be talking to people on iChat and will not recieve responses from anyone for a while then suddenly i am kicked off and the error message "The connection to the host was unexpectedly lost" appears. I will log back on and the people whom I was talking to say they were sending me messages and they didnt get any of the messages i had sent.
Thank YoU!!!

Hi Samantha,
Have answered here.
3:50 PM Wednesday; March 1, 2006

Service Portal Console Displaying "Virtual Machine Manager lost the connection to the virutal machine"

Hey All,
The issue we are having is that our admins and users cannot use the web console in the Service Portal.
When they right click on the VM and go to console a new tab opens and a message appears where the Console should appear stating: Virtual Machine Manager lost the connection to the virtual machine
We have tried Chrome/Firefox and IE 9/10/11. With Firefox and Chrome it just tries to load the Console Session.
Wonder if the community can provide some insight.
Thanks

Hi Boris,
Are your hosts Hyper-V hosts? Console connect makes use of an ActiveX control and users will need permission to install the ActiveX control.
This ActiveX control will then connect directly to the Hyper-V host that is running the virtual machine, which requires the client computer to have connectivity to the Hyper-V hosts and the user will need permission on the Hyper-V server.
Kind Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Oracle E-Business Suite access from the Host machine

Hellow,
Please, after installing E-Business Suite and going through Post-configuration details, I would like to get access of my applications portal from the host system.
I have tried several ways of doing that and would not know the steps to follow in order to access the portal directly from the physical host machine.
I took the normal steps as when configuring end users and can ping the virtual machine from the Host system but can't do the same form the virtual machine of the host machine.
I can ping another server and other machines int he same network but not the one on which the virtual machine is installed.
Regards,
N.M
Edited by: user650358 on 17-Feb-2010 07:21

Hi,
I am confused first clear what is hostmachine and what is virtual machine.....
call the machine which will access the application on virtual machine as CLIENT
call the machine which is hosting the virtual machine a VIRTUAL MACHINE HOST
call virtual machine as VIRTUAL MACHINE
You mean I should change my host IP? It has so many applications using that localhost name.Is ther any setting done in the network and have you ever accessed an application installed on Virtual machine from the host machine?>
changing of ip doesnt have any impact if ur applications are using hostname..if they are using ip then there is a issue,Yes i have acces EBIZ installed on virtula machine many times.
And if ur working in a organization then ask ur network admins to check whats the issue..may be some were firewall issue also ..thats why i asked u to chnage ip.
Regards

Error connecting to the host machine

Similar Messages

Maybe you are looking for