Error connecting to WebDAV
I have set up a WebDAV server on my Windows 7 desktop, mapping one drive to the :80 port, and another drive to the :81 port. I am able to connect to both drives on my MBA running Mountain Lion through the browser (Chrome, Safari, Firefox all work). I enter http://myexternalip:80 (or :81), am prompted for a username/password which I enter (the admin account info on my PC) and am connected immediately.
In order to mount the WebDAV drives in Finder, I then proceeded to the Finder window to 'Connect to Server...' and enter the same information. I am again prompted for a username/password, which I enter. I then receive an error: "There was a problem connect to the server 'myexternalip'. Check the server name or IP address, then try again. If you continue to have problems, contact your system administrator."
I figured this may be in issue with Finder, so I also attempted to connect through CyberDuck. However, I still cannot connect, as I get a "Login failed" error in CyberDuck.
I am confused as to why I am able to connect to the WebDAV server via browser, but not through Finder or 3rd party apps. Is this an issue with the WebDAV server setup on my Windows PC, or is it an issue with OSX?
NOTE: On my Win7 PC, I have set up WebDAV with authoring permissions granted to the admin, with Windows Authentication enabled. In addition, I have 'Directory Browsing' enabled, and have set up ports 80 and 81 in Windows Firewall and my router to the appropriate IP address (which is set as static 192.168.1.100).
Any help would be appreciated. Thanks.
http://helpx.adobe.com/dreamweaver/kb/webdav-error-connecting-server-using.html
Similar Messages
-
WebDAV I/O error: Connection refused
Hi experts,
The error "I/O error: Connection refused" was shown when I selected the "Manually Synchronization" under the "Folder" option in the menu in Teaming (Novell Vibe 3 Beta 6). This folder has been setup as a webDAV folder.
1. Do you know what the problems are?
2. In the Mirrored Folder Resource Driver Configuration of teaming installation, value "http://192.168.136.129" was specified for "host URL". For the field Root path, the value "/mirrortest" was specified. Where should I create the folder "mirrortest"? Under "/"? Under "/opt/novell/teaming/apache-tomcat/webapps"? or elsewhere?Originally Posted by ksiddiqui
If you just provided /mirrortest in the installer config, then it would mean at the top-leve; i.e. "/".
Hi ksiddiqui,
Thanks your for reply. Do you think this caused the problem? Where should I put "/mirrortest"? -
Hello,
Each time I want to connect to webdav through windows, I get the following error (after entering credentials):
-HTTP/1.1 424 Failed Dependency
From the logs on UCM, I get the following traces (see below)
Any idea what could cause this problem?
Thanks in advance,
Leo G.
webdavrequests/6 10.26 10:34:01.808 IdcServer-766 | FROM: null | REQ: PROPFIND | ORIGINALURL: /cs/idcplg/webdav/ | DEPTH: 1
services/6 10.26 10:34:01.810 IdcServer-766 Calling filter event webdavPropfind on class folderswebdav.FoldersWebdavFilterImplementor with parameter webdavPropfind
services/6 10.26 10:34:01.811 IdcServer-766 Calling filter event notifySubjects on class sitestudio.SSFilters with parameter updateFileTimestamps
services/6 10.26 10:34:01.811 IdcServer-766 Calling filter event notifySubjects on class collections.CollectionNotifySubjectsUpdate with parameter null
transactions/7 10.26 10:34:01.811 IdcServer-766 closing intradoc.filestore.BaseFileStore@7f396b32
filestore/7 10.26 10:34:01.811 IdcServer-766 dumpTransactionObjects: clear left over commit log number=0
filestore/7 10.26 10:34:01.811 IdcServer-766 dumpTransactionObjects: clear rollback log number=0
transactions/7 10.26 10:34:01.811 IdcServer-766 closing intradoc.data.WorkspaceTransactionWrapper@5fc1d8ea
services/6 10.26 10:34:01.811 IdcServer-766 Called filter event onServiceRequestError with no filter plugins registered
services/3 10.26 10:34:01.811 IdcServer-766 !csUserEventMessage,lg,ucm:16200!$ intradoc.common.ServiceException: !csUnableToExecMethod,webdavPropfind
services/3 10.26 10:34:01.811 IdcServer-766 *ScriptStack WEBDAV_PROPFIND
services/3 10.26 10:34:01.811 IdcServer-766 3:webdavPropfind,**no captured values**
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.buildServiceException(Service.java:2260)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.createServiceException(Service.java:2249)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:102)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.doCodeEx(Service.java:533)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.doCode(Service.java:505)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.doAction(Service.java:477)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.doActions(Service.java:472)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.executeActions(Service.java:458)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.Service.doRequest(Service.java:1890)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1343)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1715)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:222)>
services/3 10.26 10:34:01.811 IdcServer-766 at sun.reflect.GeneratedMethodAccessor128.invoke(Unknown Source)
services/3 10.26 10:34:01.811 IdcServer-766 ... 35 more
services/3 10.26 10:34:01.811 IdcServer-766 Caused by: java.lang.NullPointerException
services/3 10.26 10:34:01.811 IdcServer-766 at java.util.Hashtable.put(Hashtable.java:394)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.data.DataBinder.putLocal(DataBinder.java:1337)
services/3 10.26 10:34:01.811 IdcServer-766 at folderswebdav.FoldersWebdavFilterImplementor.webdavPropfind(FoldersWebdavFilterImplementor.java:162)
services/3 10.26 10:34:01.811 IdcServer-766 at folderswebdav.FoldersWebdavFilterImplementor.doFilter(FoldersWebdavFilterImplementor.java:58)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
services/3 10.26 10:34:01.811 IdcServer-766 at webdavcomponent.WebdavHandler.webdavPropfind(WebdavHandler.java:339)
services/3 10.26 10:34:01.811 IdcServer-766 at sun.reflect.GeneratedMethodAccessor916.invoke(Unknown Source)
services/3 10.26 10:34:01.811 IdcServer-766 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
services/3 10.26 10:34:01.811 IdcServer-766 at java.lang.reflect.Method.invoke(Method.java:597)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
services/3 10.26 10:34:01.811 IdcServer-766 at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
services/3 10.26 10:34:01.811 IdcServer-766 ... 51 moreEdited by: Leo-G on 26 oct. 2012 01:44
Edited by: Leo-G on 26 oct. 2012 01:48Hi,
No, there can't be any newer patch on the working environment, since we always try the patches first on the "non-working" environment.
Is there any way to check patch difference between environements?
Thanks,
Léo -
Can't connect via webdav to server 4
Since upgrading to Server.app 4, I can't connect via WebDav. I keep getting one of two connection errors:
1., "Unable to connect to the server. Check your internet connection and server name."
2., "Authorization error: Please check your login and password for this server."
I am using the same login and pwd as sftp, which works just fine. Also, I am on the same network as the server.
Any help would be greatly appreciated.I've had similar issues. I haven't completely resolved them, so I went back to Mavericks/Server 3 and I'll wait for an update. For what it's worth:
1. I was able to sign in as a different user. Both users (successful and failed) have the same permissions on the WebDave share, according to Server 4.
2. I never was able to sign in from a Windows 7 machine. The discussion linked below explains why:
https://discussions.apple.com/thread/6621349
Maybe something here will help -
Unable to connect to WebDAV server in nautilus
Nautilus 3.6.3
Even though Nautilus is _supposed_ to be able to connect to WebDAV servers, as here:
WebDAV and Secure WebDAV
Based on the HTTP protocol used on the web, WebDAV is sometimes used to share files on a local network and to store files on the internet. If the server you're connecting to supports secure connections, you should choose this option. Secure WebDAV uses strong SSL encryption, so that other users can't see your password.
A typical WebDAV URL looks like this:
http://example.hostname.com/path
Nautilus doesn't recognise http and https servers. Nautilus does recognise dav://, but when I try to connect, I get and error saying Unhandled error message: HTTP Error: Moved PermanentlyJust for any other people having problems with nautilus and webdav....I found that nautilus does not support 301/302 redirects. But strangely windows explorer.exe, kde dolphin and osx finder.app all support redirects. An example being, if your url is http and redirects to https this means nautilus will not take a dav:// and redirect it to davs:// ...sigh. So when using nautilus make sure you use an address that does not redirect otherwise you will get a Unhandled error message: HTTP Error: Moved Permanently as it doesn't follow the redirect.
Last edited by neonnds (2014-07-30 01:58:53) -
Error connecting to the SAP SRV on Windows 2008 Server platform
Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani DlaminiHi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy. -
FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
ThanksHi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) -
TCP active open: Failed connect() Error: Connection timed out SMTP
Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSKThanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM -
Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall 272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall 405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall 892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall 689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
[move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1) -
Hi All!
We are encountering what I think would be a normal error in most cases if a client is unavailable or offline. During client push, we are receiving errors connecting to a NULL value in the log (\\\admin$) as opposed to an actual client:
Under normal circumstances, the log should read as follows:
Attempting to connect to administrative share
\\<machine_name>\admin$ using <Client Push Account>.
What we are running into is a repeating error (with some processed CCR records in between) that shows as follows:
~ Doing Account Cleanup Operation .... SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Processing domain DOMAIN1 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Processing domain DOMAIN2 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Processing domain DOMAIN3 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Account Cleanup Operation Completed successfully. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
We have Three Domains (Domain1, Domain2, and Domain3) with service accounts specified in the Client Push Installation Client properties.
I don't know if there is an entry (or entries) in the SCCM database that are NULL or blank that is generating these errors.
\\\admin$ indicates, to me, that there is a missing machine name that should follow the two \\ and before the \admin$. Obviously we aren't going to be able to connect to a machine with no name (hence the Failed to Connect to Server. Error
5).
Is there a way to clean the database of these empty records and fix this recurring error? It repeats every 15 minutes.
Thank you!Yes, I know this is an old post, but I’m trying to clean them up.
I would review the CM07 console to see if there are any device without a netbios name. It will be these device that are cause you problems.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Team I am trying to export a dataset as a excel spreadsheet on to my local drive. when I ever I try to run the Export I am getting error.connection.externaldatasource error message.
Even I tried creating a excel file in my local and point that file in EDQ - Data Stores connection , still getting the same error message.
Please help.
Thanks!
BGAlso useful to understand:
- Is it a server-side or client-side data store?
- Is it an XLS or an XLSX file you are trying to write?
- What's the data volume? -
Getting error "Error connecting to MDEX" while trying to open micro browser
Hi,
I am using endeca Tools and framework 3.1.0 and MDEX 6.3.0.
While trying to open micro browser from Workbench UI to create page template configurations,I am getting following message in popout:
Error connecting to MDEX. The data service associated with this editor is not correctly configured.
Please guide the if you have any clue.
Thanks,
Mayank BatraI have successfully configured RecordSpotlight editor to use a different endeca instance. What I did is modify apps\[your app name]\config\editors_config\services\dataservice.json file with updated endeca search configuration, save the file, and run apps\[your app name]\control\set_editros_config.bat to apply the change.
To verify, you can run apps\[your app name]\control\export_site.bat command to export your site configuration, the updated data service config should show in the site xml file exported.
Hope it helps,
Michelle -
Socket read error: connection reset by peer
Hi.
Has anybody experienced the error message �Socket read error: connection reset by peer�
Please see below for detailed information.
Appreciate your help
Regards
RT
Enviroment specification
Server: HP/UX 11.00 64-bit, Oracle RDBMS 8.1.6.0.0 64-bit
2 firewalls between client and db.
Client:
Win 2000,
SP3,
Oracle Client 8.1.7.0.0 ,JDBC OCI (thin JDBC driver,class12.zip)
JDK 1.3
JRUN3.0
The TCP protocol is being used in the communication
Error messages
Web Users receive: Socket read error: connection reset by peer
Trace files on the sever: Read unexpected EOF ERROR on 18.
Explanation: The error in the server sqlnet trace file, suggests that a client connection has terminated abnormally, i.e. client machine powered off, a cable removed or a network connection aborted without warning. No user has complained of such a problem and there is no client trace with an error.
The problem
The users of the java web application, experiencing an exception almost once or twice a day.
The JRUN web-server reports broken connections to the db and client are receiving "connection reset by peer".
At the moment when the errors occurs the users just have to wait a while(2-10 min) and then they can use the web application again.(no action is taken)
This problem can not be reproduced. The problem happens only occasionally when the network is under heavy load and new DB connection is being created.
The application
The java web-application uses a customized connection pooling against the database. This pool is shared among all the users of the website. whenever a user process needs to fetch data from the database, a free connection from this pool is allocated. The application is testing if the connection is valid before making a transaction (select '1' from dual). When the error occurs a ORA-3113 end-of-file on communication channel is returned to the application.
The path between the client and db involves at least two firewalls. The firewalls are opened for sql*net traffic. The network group can tell that enquiries from the app.server is not getting feedback from the db. They have not however, identified if the enquiries are reaching the db-srever, or if they are stopped earlier in the network.
Around 1000 users, are using other applications which uses dedicated sqlnet connections against the db and they have not experienced any problems.
Issues considered
Connection pooling
It is a customized connection pooling, developed by Lindorff developers.
I have read through the source code for the connection pooling and it does the job as it should, and in case of bad connection, it tries to create a new connection.
The log file shows that the call to the method DriverManager.getConnection() hangs until the server goes down, which is probably because of the fact that the method DriverManager.setLoginTimeout(), does not take effect and timeout value is Zero. ( According to oracle , Oracle JDBC does not support login timeouts and calling the static DriverManager.setLoginTimeout() method will have no effect).
Firewall
One thing to consider is when the firewall may decide to shut down the socket due to long inactivity of a connection. This will cause problems to JDBC Connection Pool because the pool is not aware of this disconnection at the TCP/IP level; until someone checks out the connection from the pool and tries to use it. The user will get a Socket read error: connection reset by peer.
Jrun timeout paramter is less than the firewall�s timeout so the firewall will not close a connection before Jrun does.
Number of processes the DB can handle
Processes parameter is 1300, , they have not experienced the Oracle error msg �max # of processes reached�.
Port redirection through a firewall:
Since the firewall has a sql net proxy Port redirection through a firewall is not a problem. Problems with port redirection only appear at connect time, but in this situation the connections fail long after the connection is established.
The network group
The network people who investigaged the problem at Lindorff report that there are a significant amount of "dropped packages" between the database server and the jdbc client (web-application) 24 hrs. The reason for this is "unknown established TCP packet" which means that the firewall does not consider these packages to be part of an already established session. The network group believes this happen because one of the hosts send a RESET or FIN signal which the firewall have noticed but are not received by the other host.
It seems like the firewall are dropping packages bacause of "Unknown
established TCP packet" from both the JDBC client and the TNSLISTENER on the database server. The dropped packages are SQL*Net v2 traffic so clearly Oracle products are involvedPresumably something is working.
Thus the problem is not with your code. At least not the database part that you have control over.
That error occurs when the other side closes the socket. Presumably you are catching lost connection exceptions and trying to restore it. -
ASM instance crash due to error ORA-27506: IPC error connecting to a port
Hi All,
Today the ASM instance goes down.
When i checked the alert log I found the below error.
ORA-27506: IPC error connecting to a port
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1
Please find the environment details.
OS : RHEL-5
DB: 11.1.0.7 2-node RAC
I want to know the root cause of this issue.
Please suggest.
Thanks and Regards,Hi,
Could you please upload cluster alert log and cssd.log?
regards,
Kishore -
Error connecting to ftp server
Dear All,
I'm doing file to file scenario through XI. The receiver communication channel is a normal file adapter and it is working perfectly fine . My sender communication channel is a FTP adapter. I'm trying to send a file from FTP to a folder on my integration engine. When i went into adapter monitoring, i got the error in the sender file adaper for ftp. The error is - " Error connecting to ftp server ".
normally, i'm able to do the ftp from integration server to my ftp server, but through XI , it is giving me the above mentioned error. I think some of my properties are not specified correctly. Kindly advise . The properties that i have specified in the ftp adapter are -
adapter type - file
transport protocol - ftp
message protocol - file
adapter engine - integration server
server - ip address of the ftp host
port - 21
username - username of the ftp server
password - password of the ftp user
connect mode - per file transfer
transfer mode - binary
folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
file name - file in the above specified folder
Kindly let me know.
Regards.
NaveenHI Naveen,
This link explains all the parameters that need to be entered for a file adpater. Just check it out and compare it with your values and your FTP settings.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
//folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
Yes, i think you should specify the full path here.
Regards,
bhavesh
Maybe you are looking for
-
Since upgrading to 10.10.1 (14B25) on my iMac a couple of days ago I get the following error when I try to insert an image in an email - Error posting the file to https://thegallerykinsale.com/ckfinder/core/connector/php/connector.php?command= QuickU
-
Safari and alice.it mail
Here's the problem. When I try to access my mailbox on www.alice.it after filling in the required fields, "user ID" and "password", the first time I click on the ENTER button nothing happens; I click on it a second time (with the required fields fill
-
Peopletools 8.52 and SES configuration
Hi all, This is a fresh SES installation with Demo database Peopletools 8.52 and HCM 9.1. With RDBMS Oracle 11.2.0.3.0 (unicode database). I downloaded the software from edelivery and installed complete installation using the reference guide. http://
-
Searching for a more elegant way to write my where clause.
Hi, I have a table T which has two columns : X(Varchar2(100)), and Y(Varchar2(100)).I want to know all the rows in the table T for which two conditions are simultaneously true: the first condition is X is not null or Y is not null, and the second con
-
2 of 5 barcode printing in Smartforms
Hi, I am printing a 2 of 5 barcode on my smartform. When reading it using the barcode reader, I have an extra "0" showing at the beginning of the value. The extra zero is not showing on the human readable value. This is not the check digit as in the