Error connection system R3

Hi,
Today the following error is being produced:
When I start the portal, the test connection is ok, but after of some minutes the connection failed and the test is not correct.
The connection is Dedicated Application Server for R/3 System.
Thanks,
Mercedes

In the trace appeard the following:
#1.5#00110A31A778001F00000250000003F000040A76CEFE98D6#1137405302052#com.sap.engine.services.connector#sap.com/irj#com.sap.engine.services.connector#TYCO01TB31#4725####4a81f160867011da818800110a31a778#SAPEngine_Application_Thread[impl: 1
#1.5#00110A31A778001F00000250000003F000040A76CEFE98D6#1137405302052#com.sap.engine.services.connector#sap.com/irj#com.sap.engine.services.connector#TYCO01TB31#4725####4a81f160867011da818800110a31a778#SAPEngine_Application_Thread[impl
Message :
3]_35##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 60 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.
Additional information:
n.a.
Component:
File: ConnectionHashSet.java
Method: com.sap.engine.services.connector.jca.ConnectionHashSet.match
Line: 245
Can be that when arrive at a number of connections stop and no function?
Thanks,
Mercedes

Similar Messages

RFC system error in system/destination 00024No connect to database, sessio

Hi Experts,
I am getting the below mentioned error while transporting the TO.Although the transport was successful, Please let me know how to solve the probblem.
RFC system error in system/destination Message no.XT107
Diagnosis:
an error occured during RFC communications.
Function:TMS_TP_SHOW_BUFFER
RFC message :00024N0 connect to database, session terminated
System responce:
The function terminates.
Procedure: correct the error on the whole system and execute the command again.
Many thanks in advance.
Regards,
Suneel

Hi ,
sm59- find - TMSADM*- got following --
TMSADMDV2.DOMAIN_DV2            3
TMSADMPRD.DOMAIN_DV2            3
TMSADMQA2.DOMAIN_DV2            3
when i was checked(test - authorazation) for DV2 and QA2 it shows following error
                          Connection test TMSADMDV2.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               User TMSADM has no RFC authorization for function group SYST .
                          Connection test TMSADMDV2.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               User TMSADM has no RFC authorization for function group SYST .
But FOR PRD IT SHOWS
                          Connection test TMSADMPRD.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               At least three characters must be different in old/new code
pLEASE HELP ME TO RESOLVE THE ISSUE
rEGARDS
mohsin
+91-9867577675

Error creation of JCO connection: System Already Exist

Hi Experts,
We have created the SLD connection to the ECC6.0 from the Portal 7.0.
Created one JCO connection using that SLD successfully for the Clinet 100.
Now we required to create one more JCO Connection for client200 also. But it is giving the Error that
System Already Exist.
How can we resolve this. When we create the JCO connection for one client, con't we create one more JCO connection for the same system for the differt client or not?
If so How do it?
Regards

I think you can add one more client in the existing connection. well, I am not sure about that even.
nikhil

W.I.C.S Nationwide Error Connecting - Specified driver could not be loaded due system error 998

I am currently virtualising W.I.C.S Nationwide with APP V 5.0 SP1 on a Windows 64BIT machine. When I install and launch the application manually I am able to log into the application successfully without issues.
When I sequence the application, I get nothing in the report to suggest any issues. in fact the report has nothing. After sequencing, when testing the application on a client machine (Which is a mirror copy of the sequencing machine), once I put in the log
in credentials and try to connect with the application, I get the below error message:
Error Connecting - 2147467259 :Specified driver could not be loaded due system error 998:Invalid access to memory location. (Oracle in Installclient11_1,C:\ProgramData\App-V\86B33AE4-890E-4E98-AD4F-C4F7A1FCA0DE\4D075A01-3775-4BEA-BEC4-5414B3B0D02E\Root\instantclient_11_1\sqora32.dll).
I was wondering if anyone has had this issue with a similar application that tries to load an ODBC driver and if so how did you resolve it
UObi

When Sequencing did you try to go into ODBC and test the connection? Is that file in that location? If you run a ProcMon, what results does that produce in relation to the sqora32.dll?
Out of interest, have you tried sequencing on a 32-bit machine? I haven't had an issue yet but am wondering if it's a 32-bit driver running on 64-bit and not running correctly for some reason, either way, a ProcMon may give you some clues. Sorry, can't be
much help
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Error: Source system already exists. Message no. RSAR201. Points rewarded.

Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
9.     Log on to the Source System with your administrator user. Choose the correct client.
10.     On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold

Hello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian!

Error connecting to the SAP SRV on Windows 2008 Server platform

Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani Dlamini

Hi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy.

Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
Thanks

Hi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

ASM instance crash due to error ORA-27506: IPC error connecting to a port

Hi All,
Today the ASM instance goes down.
When i checked the alert log I found the below error.
ORA-27506: IPC error connecting to a port
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1
Please find the environment details.
OS : RHEL-5
DB: 11.1.0.7 2-node RAC
I want to know the root cause of this issue.
Please suggest.
Thanks and Regards,

Hi,
Could you please upload cluster alert log and cssd.log?
regards,
Kishore

Error connecting to JServer/EJB

Hi all,
I've successfully deployed a BC4J Application Module as EJB Session Bean into Oracle8i 8.1.6. The test on this Application Module works fine.
The client code that calls the EJB is:
package ricercalista.client;
import java.util.Hashtable;
import javax.naming.*;
import oracle.jbo.*;
import ricercalista.client.ejb.LoginModuleEJBClient;
import oracle.jbo.client.remote.ejb.*;
import oracle.jbo.common.remote.*;
import oracle.jbo.common.remote.ejb.*;
import ricercalista.common.ejb.*;
import ricercalista.common.*;
public class LoginClient {
final String AMDefName = "ricercalista.LoginModule";
final String username = "omero";
final String password = "omero";
final String dbUrl = "jdbc:oracle:thin:omero/omero@localhost:1521:OMERO";
public LoginClient() {
try {
Hashtable env = new Hashtable(10);
env.put(Context.INITIAL_CONTEXT_FACTORY, JboContext.JBO_CONTEXT_FACTORY);
env.put(JboContext.DEPLOY_PLATFORM, JboContext.PLATFORM_ORACLE8I);
env.put(JboContext.SECURITY_PRINCIPAL, username);
env.put(JboContext.SECURITY_CREDENTIALS, password);
env.put(JboContext.HOST_NAME, "bacco08.csr.unibo.it");
env.put(JboContext.CONNECTION_PORT, "2481");
env.put(JboContext.ORACLE_SID, "OMERO");
env.put(JboContext.APPLICATION_PATH, "test/omero/ejb");
Context ic = new InitialContext(env);
LoginModuleHome home = (LoginModuleHome) ic.lookup(AMDefName);
LoginModuleEJBClient myejb = (LoginModuleEJBClient) home.create();
myejb.getTransaction().connect(dbUrl, username, password);
myejb.setUser("turronic", "chris");
System.out.println((String) myejb.getCognome());
System.out.println((String) myejb.getNome());
ricercalista.UserProfile up = myejb.getUserProfile();
for (int i = 0; i < up.size(); i++) {
System.out.println("dominio = " + up.getCodeDomain(i) + " grado = " + up.getInterestDegree(i));
myejb.getTransaction().disconnect();
myejb.remove();
catch (java.rmi.RemoteException re) {
System.out.println("Remote exception in creating " + AMDefName);
re.printStackTrace();
catch (javax.ejb.CreateException ce) {
System.out.println("Unable to create ejb " + AMDefName);
ce.printStackTrace();
catch (NamingException ne) {
System.out.println("Unable to find application " + AMDefName);
ne.printStackTrace();
catch (oracle.jbo.ApplicationModuleCreateException e) {
System.out.println("Unable to create application module " + AMDefName);
e.printStackTrace();
public static void main(String[] args) {
new LoginClient();
When I run this client, an error occurs on the statement:
LoginModuleHome home = (LoginModuleHome) ic.lookup(AMDefName);
The error is:
System Error: javax.naming.NamingException: Unknown reasons. Root exception is java.lang.ClassNotFoundException: ricercalista.common.ejb.LoginModuleHomeHelper
System Error: void oracle.jbo.client.remote.corba.aurora.AuroraApplicationModuleHome.initRemoteHome() (AuroraApplicationModuleHome.java:167)
System Error: void oracle.jbo.client.remote.corba.aurora.AuroraApplicationModuleHome.<init>(oracle.jbo.JboContext, java.lang.String) (AuroraApplicationModuleHome.java:75)
System Error: oracle.jbo.common.JboHome oracle.jbo.client.remote.corba.aurora.AuroraInitialContext.createJboHome(java.lang.String) (AuroraInitialContext.java:47)
System Error: java.lang.Object oracle.jbo.common.JboInitialContext.lookup(java.lang.String) (JboInitialContext.java:72)
System Error: java.lang.Object javax.naming.InitialContext.lookup(java.lang.String) (InitialContext.java:349)
System Error: void ricercalista.client.LoginClient.<init>() (LoginClient.java:51)
System Error: void ricercalista.client.LoginClient.main(java.lang.String[]) (LoginClient.java:89)
Have you ever got this error? Is the client code right?
Thanks a lot!

java.lang.ClassNotFoundException:ricercalista.common.ejb.LoginModuleHomeHelper
It's saying Call Not Found and I'm guessing that ricercalista.common.ejb.LoginModuleHomeHelper
is your class? Did your classes(jar file) get to the server in the right place? to be found? Is the Classpath set?
I'm not a EJB programmer though.

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Error "602" System error: AK Datapart too short

Hi all,
Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around.
Anyway here it is:
While running a compression in BW we get Error "602" System error: AK Datapart too short.
This is happening while doing a select statement during the compression of the infocube. It does not happen all the time, just kind like when ever it feels like. The only note I could find in OSS was one about Live Cache and it does not seem to apply.
Here is the dump which I really hate doing this, but it gives all the info needed :
untime Error          DBIF_DSQL2_SQL_ERROR
Except.                CX_SY_NATIVE_SQL_ERROR
Date and Time          08/15/2007 12:23:09
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error "-602" occurred in the current database connection "DEFAULT".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "System error: AK Datapart too short"
Database error code .......: "-602"
Triggering SQL statement...: "INSERT INTO "/BIC/EZPSD_C03" ( "KEY_ZPSD_C03P",
"KEY_ZPSD_C03T", "KEY_ZPSD_C03U", "KEY_ZPSD_C031", "KEY_ZPSD_C032",
"KEY_ZPSD_C033", "KEY_ZPSD_C034", "/BIC/ZNET_ASP" ) SELECT ? ,
F."KEY_ZPSD_C03T", F."KEY_ZPSD_C03U", F."KEY_ZPSD_C031", F."KEY_ZPSD_C032","
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"GP31VIZWJDTT90894L1IA5YAC7G" or "GP31VIZWJDTT90894L1IA5YAC7G"
"TRANSFER_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"TRANSFER_ALL"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "sdcbw03"
Network address.......... "10.64.18.76"
Operating system......... "Linux"
Release.................. "2.6.9-55.ELsmp"
Hardware type............ "x86_64"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 21
Short dump setting....... "full"
Database server.......... "sdcbw03"
Database type............ "ADABAS D"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Nov 5 2006 19:46:34"
Created in............... "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version......... "SAPDB 7.5.0.030 "
Patch level.............. "156"
Patch text............... " "
Supported environment....
Database................. "MaxDB 7.5.0"
SAP database version..... "640"
Operating system......... "Linux 2.6"
Memory usage.............
Roll..................... 16192
EM....................... 20949280
Heap..................... 0
Page..................... 24576
MM Used.................. 9235016
MM Free.................. 3331560
SAP Release.............. "640"
User and Transaction
Client.............. 011
User................ "ALEREMOTE"
Language key........ "E"
Transaction......... " "
Program............. "GP31VIZWJDTT90894L1IA5YAC7G"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "GP31VIZWJDTT90894L1IA5YAC7G" in
"TRANSFER_ALL".
The main program was "RSPROCESS ".
The termination occurred in line 573 of the source code of the (Include)
program "GP31VIZWJDTT90894L1IA5YAC7G"
of the source code of program "GP31VIZWJDTT90894L1IA5YAC7G" (when calling the
editor 5730).
The program "GP31VIZWJDTT90894L1IA5YAC7G" was started as a background job.
Job name........ "BI_PROCESS_COMPRESS"
Job initiator... "ALEREMOTE"
Job number...... 12185102
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "TRANSFER_ALL" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "GP31VIZWJDTT90894L1IA5YAC7G ". Its source code
starts in line 557
of the (Include) program "GP31VIZWJDTT90894L1IA5YAC7G ".
Source Code Extract
Line
SourceCde
543
ENDIF.
544
545
COMMIT WORK.   " commit and close cursors
546
547
l_str = i_max_requid.
548
PERFORM msg_append(saplrscondense)
549
USING    'S' '355' l_str space space space
550
CHANGING c_t_msg.
551
552
ENDFORM.                               " CONDENSE_FACTTABLE_NEW
553
554
555
     Form TRANSFER_ALL
556
557
FORM TRANSFER_ALL USING i_ref_update       TYPE rs_bool
558
i_pdimid           TYPE I
559
i_pdimid_ref_point TYPE rsd_sid
560
i_pdimid_normal    TYPE rsd_sid
561
i_recordtp         TYPE rsd_sid
562
CHANGING e_ref_ins_cnt TYPE I
563
e_ins_cnt     TYPE I
564
c_t_msg       TYPE rs_t_msg.
565
566
CALL FUNCTION 'RSDU_INFOCUBE_INDEXES_DROP'
567
EXPORTING
568
I_INFOCUBE = 'ZPSD_C03'
569
I_FACTTAB = '/BIC/EZPSD_C03'.
570
571
572
EXEC SQL.
>>>>>
INSERT INTO "/BIC/EZPSD_C03"
574
( "KEY_ZPSD_C03P"
575
, "KEY_ZPSD_C03T"
576
, "KEY_ZPSD_C03U"
577
, "KEY_ZPSD_C031"
578
, "KEY_ZPSD_C032"
579
, "KEY_ZPSD_C033"
580
, "KEY_ZPSD_C034"
581
, "/BIC/ZNET_ASP"
582
583
SELECT :i_pdimid_normal
584
, F."KEY_ZPSD_C03T"
585
, F."KEY_ZPSD_C03U"
586
, F."KEY_ZPSD_C031"
587
, F."KEY_ZPSD_C032"
588
, F."KEY_ZPSD_C033"
589
, F."KEY_ZPSD_C034"
590
, SUM( F."/BIC/ZNET_ASP" )
591
FROM "/BIC/FZPSD_C03" F
592
WHERE F."KEY_ZPSD_C03P" = :i_pdimid
Any thoughts would be helpful,
Thanks,
David

This error usually occurs when there is a database lock or no space in teh database. Got DB02 and Click on Space critical objects to see whether any entries are there. If yes contact your basis to increase the space.
Hope this helps
Thanks,
Satish

Error connecting using JCO.Client: null

Hi,
I created a WD app which uses the RFC FM. I followed How-To-build-webdynpro.pdf document to create the WD and trying to deploy and run, I see the view page but when I trigger the action via button UI element I get following error as exception in the try catch block of execute method
In the NWA I see
Could not create JCOClientConnection for logical System: 'WD_MODELDATA_DEST' - Model
An exception has occurred: Erorr accessing cache [region]='XCM_SESSION_SCOPE'.
[EXCEPTION]
com.sap.isa.core.cache.Cache$Exception: Cannot return access for region 'XCM_SESSION_SCOPE'. Cache is not ready
I'm using following existing JCO definition by configuring them with correct parameters. Tested them successfully
WD_RFC_METADATA_DEST
WD_MODELDATA_DEST
What am I missing? In SM04 tcode I see 2 connections are opened with 2 Megabyte not released for a long time. I think if connections are released correctly it should drop to 1 megabyte. Is there anything that I need to do just after execute method as shown below (I have replaced function module with <FM> in below code)
try {
         wdContext.node<FM>_Input().current<FM>_Get_InputElement().modelObject().execute();
     } catch(Exception exception) {
          msgMgr.reportException(exception.getLocalizedMessage(), false);
      wdContext.nodeOutput().invalidate();
      msgMgr.reportSuccess("Success");
The error is in the catch block which is displayed on the view page.
Thanks
Praveen
I modified the above code and put in finally block to close the connections as follows, please let me know if this is OK. I still get error message as "Error connecting using JCO.Client: null" but no additional connections in the SM04 after adding finally block.
try {
         wdContext.node<FM>_Input().current<FM>_Get_InputElement().modelObject().execute();
     } catch(Exception exception) {
          msgMgr.reportException(exception.getLocalizedMessage(), false);
     }finally {
          // disconnect the connection
          wdContext.<FM>_Get_InputElement().modelObject().modelInstance().disconnectIfAlive();
Edited by: Praveen11 on Oct 5, 2009 9:06 AM

Thanks Satish.
The issue is resolved. I think it was to do with permission, as I was running directly from NWDS deploy and run the session didn't have proper authorisation or something that was causing this error.
When I copy pasted the URL in the correct browser session window I got no error and function module was successfully executed.   However the issue now is that values are not showing up in the view may be to do with mapping context or model I'll review and post back as different thread.
Thanks
Praveen

Nokia Internet Radio Error: Connection Timed Out. ...

Hi,
I'm having an issue with the Nokia Internet Radio application on the Nokia N95. The app launches ok but if I try and browse the station directory or perform a search I get the error 'Connection Timed Out. Try Again' This happens almost instantly i.e. it doesn't look like it's even trying to connect. If I go to the shoutcast site and click on the 'Tune In' button next to a station the Internet radio app launches and I get an error saying 'General: System Error' and the application closes then goes back to the browser and a message saying 'Web: No Gateway Reply' The application worked fine up until recently. I upgraded to FW V 21.0.016 and hasn't worked since so it may be that this has caused the problem. I've removed and re-downloaded \ re-installed the software but still get the same issue. Web browsing works fine, so I know my internet settings are fine, and the old open-source version of the radio player even works so it's just an issue with this app. Any advice on how to fix it would be much appreciated. Thanks.

I had the same problem and I fixed it. For me, it was because I am on the Rogers network in Canada. Regardless of where you are many cellular neworks use firewalls and something called NAT (Network Address Translation). Nokia should really make people aware of this because probably 50% of people around the world have this problem. The solution for me was to use Rogers VPN or Public IP to access the internet. Rogers blocks access to this internet connection so you have to add the service to your account for $10 per month but I have heard that other carriers like FIDO have not blocked access to it.
On the Nokia n79 this requires creating a new access point under TOOLS>SETTINGS>CONNECTIONS>DESTINATIONS. Add a new access point with the following settings:
Connection Name: Rogers VPN (or whatever you want to call it)
Data Bearer: Packet Data
Access Point Name: vpn.com
User Name: wapuser1
Prompt Password: No
Password: wapuser
Authenticaiton: Normal
Homepage: None
Use Access Point: After Confirmation (or change if you want something else)
That's it. When you load the internet radio Application and it lists your options select "Rogers VPN". If you don't see it in the list, press the soft button for Options then "Select Access Point" and you will see the full list. If you want the VPN to be the first thing you see you can change the priority under destination settings. Just select the VPN and press "Organize" then "Change priority".

TCP active open: Failed connect() Error: Connection timed out

Hi,
There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
I have no problem sending email to the same address from my hotmail account.
any suggestion ?
Thanks,
Joe

The message can only mean one thing. Your server cannot connect to that host.
It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
PIX firewalls do this.
When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
then
imsimta cnbuild
imsimta restart
will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
Post the log file, and we can see what's happening.

Error connection system R3

Similar Messages

Maybe you are looking for