Error : connection to server lost

Hi,
After upgrading support pack from PI7.1 EHP1 sp1 to sp8,we are experiencing problem with both ESR and ID timeout,
In 2mins the connection to server is terminated and we need to reconnect to it again with password
Error:
connection interrupted
connection to server lost
What parameters value needs to be changed apart from http_timeout increased to 100000 in sxmb_adm,and i did not timeout/keepalive paramter in configtool or NWA
what changes and where to be done
Thanking you

Hi ,
The Memmory and Heap Memmory seems to be ok,I think some parameter related to timeout should be increased
any idea what it is ? if that is the issue

Similar Messages

IB Design: Connection to server lost

Hi
After upgraded to SP16 stack, when I try to create new Business System in Intergration Builder Design, the connection always lost and prompted for password, the message is as below:
Connection to server lost
You can log on again once the server is available again Do you want to log on again?
What has been wrong? The upgrade done without any error.
//Jack

Jack,
Check out SAP Note 938980
To analyze the error further, perform the following steps:
1. Activate the logging on the affected client as described in note 912414.
2. Analyze the log file if it contains the following error messages:
com.sap. engine.services.security.exceptions.BaseLoginException: Cannot create new RemoteLoginContext.
Caused by: java.lang.NullPointerException at com.sap.engine.services.security.remote.RemoteSecurity_Stub.getRemoteLoginContext(RemoteSecurity_Stub.java:607)

Connection Interrupted, Connection to server lost at ID

Hello Experts,
I have a crazy issue, as and when I logon to Integration Directory on my personal system, and try to create a Communication Channel under Business Service. It pops up the following error
Connection Interrupted
Connection to server lost
You can login once the server is available again
Do you want to log on again?
But when I login again it saysu2026
Reconnection to server was successful. Repeat the action.
And when I retry to create the Communication channel the same error reoccurs and continues in the same fashion,
Same case happens when I try to import a Business System to ID from SLD.
Thanks
sk

Hi Satya,
And when I retry to create the Communication channel the same error reoccurs and continues in the same fashion,
Same case happens when I try to import a Business System to ID from SLD.
I guess this patch might help you in getting rid of the connection dropping error. Get in touch with your basis folk for implementing this patch.
Else go to -
http://service.sap.com/nw2004s -> Support Package Stacks Information
for the implementation guide and the detailed steps are mentioned there.
Hope this helps.
Regards,
Neetesh

Connection to server lost

Hello,
After upgrading to SP12 and then returning back to SP10 we have no access anymore to the integration processes in IB.
error message is :
"<b>Connection to server lost
you can log on again once the server is available again
Do you want to logon again?</b>"
Strange is old user who didn't connect for a long time still has access to the processes.

Hi Nilesh,
I have restarted Java J2ee in transaction SMICM but the error still persist.
When i go in SM21 i have following error :
10:27:55 RD    Q0 I Operating system call recv failed (error no. 10054)
10:27:55 RD    S2 3 Connection to CPI-C client 129 was closed
10:27:55 RD    S7 4 > Partner LU name:
10:27:55 RD    S0 R > Host: 10.155.62.52
10:27:55 RD    S0 I > Partner TP Name: jlaunch
10:27:55 DIA 003 200 SAPJSF R4 9 Communication error, CPIC return code 020, SAP return code 223
10:27:55 DIA 003 200 SAPJSF R5 A > Conversation ID: 96353898
10:27:55 DIA 003 200 SAPJSF R6 4 > CPI-C function: CMSEND(SAP)
It seems like a network problem but how can you handle this?
Regards,
Laurent.

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

CCM.LOG Showing Errors Connecting to Server (Error 5 - Access Denied) to \\\admin$ Share

Hi All!
We are encountering what I think would be a normal error in most cases if a client is unavailable or offline. During client push, we are receiving errors connecting to a NULL value in the log (\\\admin$) as opposed to an actual client:
Under normal circumstances, the log should read as follows:
Attempting to connect to administrative share
\\<machine_name>\admin$ using <Client Push Account>.
What we are running into is a repeating error (with some processed CCR records in between) that shows as follows:
~ Doing Account Cleanup Operation .... SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Processing domain DOMAIN1 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:14 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Processing domain DOMAIN2 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Processing domain DOMAIN3 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Trying each entry in the SMS Client Remote Installation account list SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN3\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN3\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN2\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN2\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using account 'DOMAIN1\clientpush_service_account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ WNetAddConnection2 failed (LOGON32_LOGON_NEW_CREDENTIALS) using account DOMAIN1\clientpush_service_account (000004b3) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ LogonUser failed (LOGON32_LOGON_INTERACTIVE) using account DOMAIN1\clientpush_service_account (00000775) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Attempting to connect to administrative share '\\\admin$' using machine account. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to get token for current process (5) SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ ERROR: Failed to connect to the \\\admin$ share using account 'Machine Account' SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Failed to connect to Server. Error 5 SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
~ Account Cleanup Operation Completed successfully. SMS_CLIENT_CONFIG_MANAGER 10/2/2013 10:46:15 AM 8612 (0x21A4)
We have Three Domains (Domain1, Domain2, and Domain3) with service accounts specified in the Client Push Installation Client properties.
I don't know if there is an entry (or entries) in the SCCM database that are NULL or blank that is generating these errors.
\\\admin$ indicates, to me, that there is a missing machine name that should follow the two \\ and before the \admin$. Obviously we aren't going to be able to connect to a machine with no name (hence the Failed to Connect to Server. Error
5).
Is there a way to clean the database of these empty records and fix this recurring error? It repeats every 15 minutes.
Thank you!

Yes, I know this is an old post, but I’m trying to clean them up.
I would review the CM07 console to see if there are any device without a netbios name. It will be these device that are cause you problems.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Error connecting weblogic server 10.3.6.0 64bits

Hello
I installed weblogic server 10.3.6.0 64bits on windows server 2008 R2 64bits.
I have jdeveloper 11.1.1.7.0 installed on client machines which are xp pro 32bits and win 7 32bits.
When I try to connect weblogic server from jdeveloper it is giving me network error as below: Test failed: IO Error: The Network Adapter could not establish the connection
Although I can see this 64bits server from this machine and share server's hard disk too.
Need help in this regard.
Regards,
Masood
Edited by: Masood on Jun 3, 2013 3:40 AM

Hii,
No resources currently available in pool ePayBatchDS to allocate to applications.
This exception cleaarly shows the connection are not available to allocate to ePayBatchDS datasource.
As you said there are altogether 7 data source out which six are working and one is not.
In general if you are creating a datasource and providing a connection pool size we should consider the number of connection available or allowed at the database side as well.
Please cross check at the DB side the number of connection available and based on that try to tune the connection pool size in your data sources.
Regards,
Abdul

When sending emails it says connection to server lost can anyone help

I have an iPad which is not sending emails, it says connection to server failed, anyone got a clue please

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.htmlhttp://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.htmlhttp://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Xinit: connection to server lost

Hi all,
I'm trying to install Arch for the first time... probably I had to expect everything would work directly :-)
So, I've been stuck at the startx stage. Basically, I followed the beginner's guide, installed the open-source radeon driver (graphics card: Radeon HD 3650), created an xorg.conf from Xorg --configure and copied .xinitrc from /etc/skel.
Now, both with startx and with xinit -- /usr/bin/X -nolisten tcp, I get a black screen for a few seconds with a blinking cursor on the top left, then I fall bacl to the console with a seemingly innocuous message except for the last two lines:
xinit: connection to X server lost
waiting for X server to shut down
The potentially relevant files (.xinitrc, xorg.conf, Xorg.0.log, Xorg.0.log.old) are here:
http://paste.pocoo.org/show/438407/
http://paste.pocoo.org/show/438408/
http://paste.pocoo.org/show/438409/
http://paste.pocoo.org/show/438410/
Does anyone have an idea of what's going on? Any help would be greatly appreciated.
Antony

You don't start a window manager so X is done running and exits. You need to start a window manager in .xinitrc.
Also, the open ATI driver doesn't need xorg.conf anymore unless you need specific tweaks. You can just delete xorg.conf.

I Can't get emails , connection to server lost, what do I do?

I can't get my emails, msg states the connection to server failed! How do,I remedy this?

Who is your mail provider? It could just be a temporary issue. If you use Yahoo their service has been buggy and unreliable at best for the past few months as they 'upgrade'. Might just wait it out.
You could try force quitting the mail app. Double tap the home button. Scroll sideways if needed to get the mail icon on your screen. Flick the mail preview window up and off the screen then single tap the home button to exit the mode. THen try to download your mail again.

Cx_oracle ping (OCIPing) hangs when connection to server lost

The cx_oracle ping function appears to be blocking and will wait forever when the connection to the database is broken but the socket still remains.
we're running cx_oracle 4.4 on an Oracle 11.1 server with python 2.5, and have a remote client pushing data to the server across a flakey link.
The basic structure of our python client is
db = cx_Oracle.connect()
while True:
try:
db.ping()
cursor = cx_Oracle.Cursor(db)
cursor.execute(query, params)
except:
print "DB error"
so the socket pointer will be there which is checked in the ping command, so it will pass that, but then it will attempt to issue a ping to the server which is where it hangs forever.
Any advice on the best way to get around this?

I would suggest to take this kind of question to the cx_Oracle developer himself here for an exact answer.

Email with links in body give an error "Connecting to server"

I think some people have noticed this too. You recieve and email with a link at the bottom but it just just a square with a red X in it, when you try to foward or reply, the Outlook client gives a Message "Connecting to the Server" and just
hangs there until you end the task. But when replying or fowarding, delete that box with a red X and the email is sent. I know that Outlook is trying to connect to that link, but it could not. So is there a setting or a way to solve this issue
since you are not able to connect to that link. Outlook 2010/2013

I recommend that you post this in the Outlook Forum: http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Error connecting calendar server Yosemite (version 4)

Good afternoon.
When setting up an account CalDaV, configured server to Yosemite (version 4), reports the error "Server for secure data transmission is not available."
What could be the problem?

Bonjour,
This problem seems to be related to your Kernel parameter.
At this point I would suggest to contact Oracle Support and open a TAR with the calendar group.
Thank you,
Manon Delisle

Connection to server broken: non-chunked HTTP read lost connection

A java applet popped this up on my screen, no idea where to look on my machine - it's only the second time its happened in many weeks but I would like to be able to interact with the cause.
Java was installed from Sun's download in June 2006 on Windows Adv. Server. MS auto update and defender currently active.

some program is trying to get some update from its server and so it is trying to connect to its server but either you don't have internet connection or it can have low speed, because of this reason some program show this error "Connection to server broken: non-chunked HTTP read lost connection". so you have to stop the scheduling of that program.

Error : connection to server lost

Similar Messages

Maybe you are looking for