Error conneting to BI query in BO
Hi,
Dashboard i have used sap net weaver connection ,it is showing input and output values then it is giving following error
Did you follow the steps outlined here: Creating a Dashboard against a BEx Query, Feature Pack 3/SP4
Similar Messages
-
Error while trying to query mbean
I am getting an error while trying to query MBeans:
<Mar 27, 2007 4:27:32 AM MDT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
ERROR: Tue Mar 27 04:27:32 MDT 2007MBeanHome being refreshed weblogic.management.NoAccessRuntimeException: User guest does not have access permission on weblogic.admin.mbean.MBeanHome
Bea doc says that the cause of this error is that the context is closed in a different thread than the one that created it. I have multiple thread that query the mbeans. The code that does the above is in a synchronized block. The code runs fine on some environments. On wls 8.1 it is giving the above error.
Anyone faced this issue? Any ideas, suggestions?
thanks a lot
JainHi Daniel
Thanks for your help. Here is some more info.
I have another application that goes out and tries to get the MBeanHome. Here is the code:
Environment env = new Environment();
env.setProviderUrl(t3URL);
env.setSecurityPrincipal(t3UserName);
env.setSecurityCredentials(t3Password);
ctx = env.getInitialContext();
mBeanHome = (MBeanHome) ctx.lookup MBeanHome.ADMIN_JNDI_NAME);
This code runs fine in the app. where it is not threaded. But the same code when run in a separate thread is throwing the error. It is happening only in wbl 8.1. In wls 6.1 it runs fine. It is strange. Any clues will be appreciated. -
Error message "Error when scheduling the query(JOB_CLOSE)".
Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum -
Error in invoking task query service-after customising Worklist application
hi' I am getting error after trying to customize the Worklist application.
IWorkflowServiceClient wfSvcClient =WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.SOAP_CLIENT);
IWorkflowContext wfCtx = wfSvcClient.getTaskQueryService().authenticate(userid, password, realm_name, null);
In the above code 2nd line gives error:
log4j:WARN No appenders could be found for logger (collaxa.cube.services).
log4j:WARN Please initialize the log4j system properly.
<2009-11-16 11:36:55,598> <ERROR> <oracle.bpel.services.workflow> <::>
java.lang.NullPointerException
at oracle.bpel.services.common.util.AbstractJaxbUtil.getAbsoluteSchemaLocation(AbstractJaxbUtil.java:320)
at oracle.bpel.services.common.util.AbstractJaxbUtil.createUnmarshaller(AbstractJaxbUtil.java:295)
at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:145)
at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:127)
at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:60)
at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
at oracle.bpel.services.config.ConfigurationManager.getProperty(ConfigurationManager.java:119)
at oracle.bpel.services.config.ConfigurationManager.getBooleanProperty(ConfigurationManager.java:170)
at oracle.bpel.services.common.exception.ServicesException.<clinit>(ServicesException.java:61)
at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:79)
at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:151)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.<clinit>(AbstractDOMTaskQueryServiceClient.java:73)
at oracle.bpel.services.workflow.client.SOAPWorkflowServiceClient.getTaskQueryService(SOAPWorkflowServiceClient.java:73)
at test.GetWorkList.getWorklist(GetWorkList.java:39)
at test.GetWorkList.main(GetWorkList.java:111)
<::> ORABPEL-30028
<::>
<::> Invalid configuration file wf_config.xml
<::> The configuration file wf_config.xml not be read.
<::> Make sure that the configuration file wf_config.xml is available and is a valid XML document. Contact oracle support if error is not fixable.
<::>
<::> at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:79)
<::> at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
<::> at oracle.bpel.services.config.ConfigurationManager.getProperty(ConfigurationManager.java:119)
<::> at oracle.bpel.services.config.ConfigurationManager.getBooleanProperty(ConfigurationManager.java:170)
<::> at oracle.bpel.services.common.exception.ServicesException.<clinit>(ServicesException.java:61)
<::> at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:79)
<::> at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
<::> at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:151)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.<clinit>(AbstractDOMTaskQueryServiceClient.java:73)
<::> at oracle.bpel.services.workflow.client.SOAPWorkflowServiceClient.getTaskQueryService(SOAPWorkflowServiceClient.java:73)
<::> at test.GetWorkList.getWorklist(GetWorkList.java:39)
<::> at test.GetWorkList.main(GetWorkList.java:111)
<::> Caused by: java.lang.NullPointerException
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.getAbsoluteSchemaLocation(AbstractJaxbUtil.java:320)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.createUnmarshaller(AbstractJaxbUtil.java:295)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:145)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:127)
<::> at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:60)
<::> ... 11 more
<2009-11-16 11:36:55,598> <ERROR> <oracle.bpel.services.workflow> <::>
java.lang.NullPointerException
at oracle.bpel.services.common.util.AbstractJaxbUtil.getAbsoluteSchemaLocation(AbstractJaxbUtil.java:320)
at oracle.bpel.services.common.util.AbstractJaxbUtil.createUnmarshaller(AbstractJaxbUtil.java:295)
at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:145)
at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:127)
at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:60)
at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
at oracle.bpel.services.config.ConfigurationManager.getProperty(ConfigurationManager.java:119)
at oracle.bpel.services.config.ConfigurationManager.getBooleanProperty(ConfigurationManager.java:170)
at oracle.bpel.services.common.exception.ServicesException.<clinit>(ServicesException.java:61)
at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:79)
at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:151)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.<clinit>(AbstractDOMTaskQueryServiceClient.java:73)
at oracle.bpel.services.workflow.client.SOAPWorkflowServiceClient.getTaskQueryService(SOAPWorkflowServiceClient.java:73)
at test.GetWorkList.getWorklist(GetWorkList.java:39)
at test.GetWorkList.main(GetWorkList.java:111)
<::> ORABPEL-30028
<::>
<::> Invalid configuration file wf_config.xml
<::> The configuration file wf_config.xml not be read.
<::> Make sure that the configuration file wf_config.xml is available and is a valid XML document. Contact oracle support if error is not fixable.
<::>
<::> at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:79)
<::> at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
<::> at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:151)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.<clinit>(AbstractDOMTaskQueryServiceClient.java:73)
<::> at oracle.bpel.services.workflow.client.SOAPWorkflowServiceClient.getTaskQueryService(SOAPWorkflowServiceClient.java:73)
<::> at test.GetWorkList.getWorklist(GetWorkList.java:39)
<::> at test.GetWorkList.main(GetWorkList.java:111)
<::> Caused by: java.lang.NullPointerException
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.getAbsoluteSchemaLocation(AbstractJaxbUtil.java:320)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.createUnmarshaller(AbstractJaxbUtil.java:295)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:145)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:127)
<::> at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:60)
<::> ... 6 more
<2009-11-16 11:36:55,598> <ERROR> <oracle.bpel.services.workflow> <::>
java.lang.NullPointerException
at oracle.bpel.services.common.util.AbstractJaxbUtil.getAbsoluteSchemaLocation(AbstractJaxbUtil.java:320)
at oracle.bpel.services.common.util.AbstractJaxbUtil.createUnmarshaller(AbstractJaxbUtil.java:295)
at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:145)
at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:127)
at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:60)
at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:151)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.<clinit>(AbstractDOMTaskQueryServiceClient.java:73)
at oracle.bpel.services.workflow.client.SOAPWorkflowServiceClient.getTaskQueryService(SOAPWorkflowServiceClient.java:73)
at test.GetWorkList.getWorklist(GetWorkList.java:39)
at test.GetWorkList.main(GetWorkList.java:111)
<::> ORABPEL-30028
<::>
<::> Invalid configuration file wf_config.xml
<::> The configuration file wf_config.xml not be read.
<::> Make sure that the configuration file wf_config.xml is available and is a valid XML document. Contact oracle support if error is not fixable.
<::>
<::> at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:79)
<::> at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
<::> at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:151)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.<clinit>(AbstractDOMTaskQueryServiceClient.java:73)
<::> at oracle.bpel.services.workflow.client.SOAPWorkflowServiceClient.getTaskQueryService(SOAPWorkflowServiceClient.java:73)
<::> at test.GetWorkList.getWorklist(GetWorkList.java:39)
<::> at test.GetWorkList.main(GetWorkList.java:111)
<::> Caused by: java.lang.NullPointerException
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.getAbsoluteSchemaLocation(AbstractJaxbUtil.java:320)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.createUnmarshaller(AbstractJaxbUtil.java:295)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:145)
<::> at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:127)
<::> at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:60)
<::> ... 6 more
<2009-11-16 11:36:55,598> <ERROR> <oracle.bpel.services.workflow> <::>
java.lang.NullPointerException
at oracle.bpel.services.common.util.AbstractJaxbUtil.getAbsoluteSchemaLocation(AbstractJaxbUtil.java:320)
at oracle.bpel.services.common.util.AbstractJaxbUtil.createUnmarshaller(AbstractJaxbUtil.java:295)
at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:145)
at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:127)
at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:60)
at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:151)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.<clinit>(AbstractDOMTaskQueryServiceClient.java:73)
at oracle.bpel.services.workflow.client.SOAPWorkflowServiceClient.getTaskQueryService(SOAPWorkflowServiceClient.java:73)
at test.GetWorkList.getWorklist(GetWorkList.java:39)
at test.GetWorkList.main(GetWorkList.java:111)
<::> WorkflowService:: VerificationService.VerificationService: Session Timeout set to default due to error: Invalid configuration file wf_config.xml
<::> The configuration file wf_config.xml not be read.
<::> Make sure that the configuration file wf_config.xml is available and is a valid XML document. Contact oracle support if error is not fixable.
ITaskQueryService
<::> ORABPEL-30509
<::>
<::> Error in invoking task query service.
<::> A client side error occured in invoking the task query service.
<::> Please check the exception error stack to identify the error. Contact oracle support if error is not fixable.
<::>
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:176)
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:193)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:90)
<::> at test.GetWorkList.getWorklist(GetWorkList.java:43)
<::> at test.GetWorkList.main(GetWorkList.java:111)
<::> Caused by: javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider org.apache.axis.soap.MessageFactoryImpl not found
<::> at javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:119)
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:103)
<::> ... 4 more
<2009-11-16 11:36:55,661> <ERROR> <oracle.bpel.services.workflow> <::> Unable to create message factory for SOAP: Provider org.apache.axis.soap.MessageFactoryImpl not found
javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider org.apache.axis.soap.MessageFactoryImpl not found
at javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:119)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:103)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:193)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:90)
at test.GetWorkList.getWorklist(GetWorkList.java:43)
at test.GetWorkList.main(GetWorkList.java:111)
<::> ORABPEL-30509
<::>
<::> Error in invoking task query service.
<::> A client side error occured in invoking the task query service.
<::> Please check the exception error stack to identify the error. Contact oracle support if error is not fixable.
<::>
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:176)
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:193)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:90)
<::> at test.GetWorkList.getWorklist(GetWorkList.java:43)
<::> at test.GetWorkList.main(GetWorkList.java:111)
<::> Caused by: javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider org.apache.axis.soap.MessageFactoryImpl not found
<::> at javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:119)
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:103)
<::> ... 4 more
<2009-11-16 11:36:55,661> <ERROR> <oracle.bpel.services.workflow> <::> Unable to create message factory for SOAP: Provider org.apache.axis.soap.MessageFactoryImpl not found
javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider org.apache.axis.soap.MessageFactoryImpl not found
at javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:119)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:103)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:193)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:90)
at test.GetWorkList.getWorklist(GetWorkList.java:43)
at test.GetWorkList.main(GetWorkList.java:111)
Error in invoking task query service.
A client side error occured in invoking the task query service.
Please check the exception error stack to identify the error. Contact oracle support if error is not fixable.
javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider org.apache.axis.soap.MessageFactoryImpl not found
at javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:119)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.invoke(TaskQueryServiceSOAPClient.java:103)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceSOAPClient.authenticate(TaskQueryServiceSOAPClient.java:193)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.authenticate(AbstractDOMTaskQueryServiceClient.java:90)
at test.GetWorkList.getWorklist(GetWorkList.java:43)
at test.GetWorkList.main(GetWorkList.java:111)after taskquery
Edited by: Yatan on Nov 16, 2009 12:22 PMI am not getting where to keep this .xml file so it is able to read this.
please advice.
thanks
Yatan -
Error while executing BEX query via FM
Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikeshthe key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date -
Getting ORA Error while running any Query
Hi Experts - I am getting below error message for any query i run in Webi. Please help.
failed to execute with the error ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_OBJ#_INTCOL# by 128 in tablespace. (WIS 10901)Hello communutiy, hello rohan,
after updating patches next working day we also get this erreor message
"ORA-00604: error occurred at recursive SQL level 1 ORA-01655: unable to extend cluster SYS.C_OBJ#_INTCOL# by 128 in tablespace"
What have you done so far. Could you solve this issue? If yes how?
Best regards Harry -
Error when executing a query on master data
Hi Friends,
When I execute a query fon Master Data Characteristic infoObject ( 0BPARTNER ) from BEx Analyzer I got the below error. 0BPARTNER contains 15 attributes. I am getting the below error only for this query. Rest all other queries are working good with the same BEx Analyzer.
<b>An error occured in the communication with the BW Server.
Due to this connection has to be closed.</b>
<b>Detailed Description:
The system is configured incorrectly.</b>
Please tell me what could be the problem? How to overcome this?
Thanks,
SasiHi Arun,
Before the execution of query I did that. And it was ' Query is Correct'.
Any more ideas?
Thanks,
Sasi. -
Hi,
I have created a query and i am getting error messeges while opening query in query and designer and failing to open the query.
Error messeges:
Terminate: Unexpected Error: RFC_ERROR_SYSTEM_FAILURE-Exception condition "INCONSISTENCY" raised.
Pl let me know if i can do something so as to open this query.
Thanks & Regards,
VJHi,
Please run the report ANALYZE_RSZ_TABLES as mentioned in Note 792779.
This will help you in detecting and repairing the inconsistent elements in the query.
Please also see the note 1020826.
Hope it helps.
Regards,
Nitin -
ORA-12801: error signaled in parallel query server
Hi all
What are the basic reasons of this error:
ORA-12801: error signaled in parallel query server
I have received this error while running report>>>What are the basic reasons of this error:
ORA-12801: error signaled in parallel query server string
Cause: A parallel query server reached an exception condition.
Action: Check the following error message for the cause, and consult your error manual for the appropriate action. -
Error while executing the query
Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit KhannaHi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy -
Serious system error while executing the query: java.lang.OutOfMemoryError
From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
<ns0:field1>1</ns0:field1>
<ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
<ns0:field1>2</ns0:field1>
<ns0:field10>test2</ns0:field10>
</ns0:createTemp>
</ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space -
ORA-27092 Error while executing any query from client
Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM -
Frm-40505:ORACLE error: unable to perform query in oracle forms 10g
Hi,
I get error frm-40505:ORACLE error: unable to perform query on oracle form in 10g environment, but the same form works properly in 6i.
Please let me know what do i need to do to correct this problem.
Regards,
PriyaHi everyone,
I have block created on view V_LE_USID_1L (which gives the error frm-40505) . We don't need any updation on this block, so the property 'updateallowed' is set to 'NO'.
To fix this error I modified 'Keymode' property, set it to 'updatable' from 'automatic'. This change solved the problem with frm-40505 but it leads one more problem.
The datablock v_le_usid_1l allows user to enter the text (i.e. updated the field), when the data is saved, no message is shown. When the data is refreshed on the screen, the change done previously on the block will not be seen (this is because the block updateallowed is set to NO), how do we stop the fields of the block being editable?
We don't want to go ahead with this solution as, we might find several similar screens nad its diff to modify each one of them individually. When they work properly in 6i, what it doesn't in 10g? does it require any registry setting?
Regards,
Priya -
TIME-OUT error in BSAK select query(Progress Indicator is also used)
Hi,
In my report program one select query is there on BSAK table, which is as follows --
SELECT BUKRS
BELNR
GJAHR
SHKZG
BSCHL
UMSKZ
LIFNR
EBELN
EBELP
WRBTR
DMBTR
XZAHL
REBZG
AUGBL
BLART
AUFNR
AUGDT
BUZEI FROM BSAK
INTO TABLE IT_BSAK
FOR ALL ENTRIES IN IT_BKPF1
WHERE BUKRS = IT_BKPF1-BUKRS
AND AUGDT = IT_BKPF1-BUDAT
AND AUGBL = IT_BKPF1-BELNR
AND BSCHL IN ('31' , '29', '26', '39', '25').
I used Progress Indicator befor running this query and after this query also. But still It's giving me TIME-OUT error in this select query only.
I run the same query for 10 records in IT_BKPF1 table, it runs perfectly. But when I run it for 1000 records it giving dump.
And in actual bussiness my records are always more than 100 only.
I also check the indexing. It having secondary indexing on this BUKRS, AUGDT, AUGBL fields. Then also it's giving error.
so, How can I solve this dump..?? What could be the reason..??
Thanks in advance...!!
Regards,
Poonam.Hi Poonam Patil,
Try to provide BELNR and GJAHR in where condition...
BKPF-DBBLG ==> BSAK-BELNR
Also check
BKPF-BLDAT ==> BSAK-AUGDT
Check out above relation...
If data is there in these fields of the table and both are matching then you can pass it and as they are in primary key of BSAK it will improve the performance...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
Case expression error with a select query in the condition
Consider the two query below:
1. The first one use a case expression :
select case when 3 > (select 1 from dual)*2 then 1 else 0 end from dual
2. The equivalent with a decode expression:
select
decode(sign(3-(select 1 from dual)*2),1,1,0) from dual
The first query return an ORA-00905 error but not the second one. It seems that the arithmetic operation (select 1 from dual)*2 cause the error. The folowing query doesn't return this error:
select case when 3 > (select 2 from dual) then 1 else 0 end from dual
I run the test with Oracle 8.1.7.3 Enterprise Edition. Is it a known bug ?
Thomasora8174>select case when 3 > (select 1 from dual)*2 then 1 else 0 end from dual;
select case when 3 > (select 1 from dual)*2 then 1 else 0 end from dual
ERROR at line 1:
ORA-00905: missing keyword
ora8174>select case when 3 > cast((select 1 from dual)*2 as number) then 1 else 0 end from dual;
CASEWHEN3>CAST((SELECT1FROMDUAL)*2ASNUMBER)THEN1ELSE0END
1
1 row selected.
ora8174>select case when 3 > to_number((select 1 from dual)*2) then 1 else 0 end from dual;
CASEWHEN3>TO_NUMBER((SELECT1FROMDUAL)*2)THEN1ELSE0END
1
1 row selected.
ora8174>@connect
Connected.
ora9204>select case when 3 > (select 1 from dual)*2 then 1 else 0 end from dual;
CASEWHEN3>(SELECT1FROMDUAL)*2THEN1ELSE0END
1
1 row selected.
Maybe you are looking for
-
Error while opening a report from worskpace
I have created a report in WebAnalysis (http://server:19000/WebAnalysis) using analytical connection. When I try to open the same report from http://server:45000/worskpace following error is given 'getContent' is null or not an object. click ok Requi
-
Join between fact table and master data table
Is it posible to join a Cube with a Characteristic? This is exactly what i need: - In my cube i have date (0CALDAY) and (among others) a characteristic (ZCHAR) and a key figure (ZKEYF). - I added a key figure (ZKFAT) as an attribute to ZCHAR. So the
-
Kerberos running, but SSO not working??
hey all so - relativley new to OSX Server but am loving it thus far. I am trying to get SSO to work but am having huge issues. Kerberos IS running according to Sever Admin but users are not able to use any of the SSO functions. When i run klist on us
-
How do I recover a video from 2010?
I can not find a video that I uploaded on the computer on January, 2010. please help!
-
Anyone know what the following error is?
Approx. 5-10 minutes after I boot up my early 2011 MacBook Pro, I get the following error in the Console window: 5/18/12 8:54:23.863 AM KernelEventAgent: tid 00000000 received event(s) VQ_NOTRESP (1) This will be followed almost immediately by a NFS