Error:Convers. foreign curr. - local curr.0.0000000000000000E+00 not found

Hi Gurus
When I am loding data from ODS to cube i am getting 'Error:Convers. foreign curr. -> local curr.0.0000000000000000E+00 not found'. Request was failed. Can any one help me in this issue.Up to Ods data loaded successfully.
Thanks in advance
Sriman

Hi,
first of all, I proposed to look at the currency rates in the system.
If you work with R/3 then you can copy rates into BW:
RSA1 - Source systems area - find your SS - right click on it - Transfer Exchange rates.
After or before that you can look in SE16 at the TCURR table and try to locate rates you need.
You can do it also, as well as set it up, in SPRO, general settings.
Regards,
San!

Similar Messages

  • Error conversion  Foreign curr. to  local currency

    HI experts,
    Can you please let me know the solution for the below error which i found during loading Datasource
    2LIS_11_VAITM for the cube sales overview
    *Under :*
    Data Package 1 ( 2637 Records ) : Errors occurred
    Update rules ( 2637  -> 566  Records ) : Errors occurred
    Data records for package 1 selected in PSA - 13 error(s)
    *Record 237 :Error conversion foreign curr. -> local curr.: 0000007470 20090123 GBP -> EUR*
    Please provide solution for the above error?
    Thanks,
    Hameed.

    Hi Hameed,
    check the TCURR table on both the BW and R/3 side.
    Then if the GBP to EURO conversion is not maintained then make an entry in the TCURR table.
    If the entry is there and not maintained then maintain with correct ratio by changing the entry.
    then load the data ..
    May it solve your problem..
    Regards,
    Ravi Kanth

  • Error: Conversion foreign curr. - local curr when load to SD cube

    Hi Experts,
    I have issue regarding loading data from R/3 to SD: Sales Overview cube. After I did filling set up table and loaded it. It show errors as Error: Conversion foreign curr. -> local curr.: 0090010996 00000000 GBP -> DKK.
    I have searched and found many threads about this error but none of them could fix my problem. I did try to transfer global setting and currency conversion and load but still got error.
    I am wondering if any of you have had this experiece and how did you solve it?
    Thank you in advace
    BS

    Hi Ajeet,
    Thank you for your reply. I have checked mapping they are all correct.
    I checked on TCURR table in R/3. Currency GBP has maintained valid from 01.01.2008.
    The error occured when local currency is not the same to document currency as:
    Date 03.03.2008     
    Local Currency     DKK     
    Document curreny             GBP
    But There is no error if local currency = Document currency as:
    Date 03.03.2008     
    Local Currency     DKK     
    Document curreny             DKK
    regards,
    BS

  • Error Conversion foreign curr. (Data Records were recognised as incorrect)

    hi all
    I am working on SAP BW 3.5 version on Production Server
    I am fetching Data from SAP R/3 system to BW 3.5 systems for SD Order and Billing
    Data is correctly Loaded for SD Orders and when I am trying to Load Data for SD Billing,I am got the following Error
    Data Records were recognised as incorrect, butStatus is Green
    Error Request is;
    Error Conversion foreign curr.- Local currency ; 0110005292 20050425 GBP - INR
    Please let me know on this Error
    thanks in Advance

    Check currency conversion key in RRC3 transaction.The key should have defined in such a way it translates any currency

  • SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

    Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
    to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
    about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
    I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
    but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

    Hi,
    Please try setting the credentials of the datasource.
    1. Double click and open the datasource in your project.
    2. Click on the credentials tab, and click on option button 'Use this username and password'
    3. Enter the username and password to connect to the datasource
    4. Deploy or upload the datasource to the report server and try accessing the reports.
    Hope this helps.
    Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
    BH

  • Error message when installing Flash Player : List of actions not found

    I get an error message when trying to install Flash Player.
    I use Windows 64 bit with Internet Explorer 64x.
    I'm able to download, the installation starts but it stops before completing.
    I get this error message (loosely transalated) :
    Installation encountered errors
    List of actions not found
    How can I fix this ?
    Thank you
    Annie

    I solved my problem by installing the Flash Player from home.
    The network security at work prevented me from completing installation.
    Thanks for your help.
    Annie
    2012/9/26 Pat Willener <[email protected]>
       Re: Error message when installing Flash Player : List of actions not
    found  created by Pat Willener <http://forums.adobe.com/people/pwillener>in
    Installing Flash Player - View the full discussion<http://forums.adobe.com/message/4728064#4728064

  • ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

    ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
    is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open  Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
    ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
    I am using follwoing string
     <connectionStrings>
    <add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
     </connectionStrings>
    Guide me What I do?

    Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
    the DSN. It's better if you add a System DSN.
    Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
    driver specified". See this KB article:
    http://support.microsoft.com/kb/942976/en-us

  • When I try to open up a PDF document, i get the following error message: "There was an error opening this document. The network path was not found" AArrgh please help as I need to open up my documents. Thanks.

    When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
    Thank for any help.

    The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.

  • Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found

    hi,
    While running a page using jdeveloper am getting error like
    Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found.
    am very thankful to the response
    Thanks
    Surya

    Hi,
    I faced the same issue.
    I fixed it by searching the missing file (In my case MyEO.xml which is a removed file) using JDeveloper (Menu Search/Search Files...).
    It found an occurence in the related .jpr file.
    In the .jpr, I deleted the related lines:
    <Item>
    <Key class="java.net.URL" path="xx/oracle/apps/.../MyEO.xml"/>
    <Value idref="15"/>
    </Item>
    That's it.
    Regards,
    Olivier

  • Error message: JPS-01538: The default policy provider was not found..winXP

    Hi All,
    i am getting "Error message: JPS-01538: The default policy provider was not found" error when i am tryin to start Oracle Admin Server(11.1.1.3.0) after installing on Windows XP.
    Please see the below log and help me to solve this issue.
    ==============================================================================
    Thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1394)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.security.jps.JpsRuntimeException: JPS-01538: The default policy provider was not found.
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:273)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.security.jps.JpsException: JPS-01538: The default policy provider was not found.
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:705)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.security.jps.JpsException: JPS-01514: The default context is missing in jps-config.xml.
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:665)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: oracle.security.jps.service.credstore.CredStoreException: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
         at oracle.security.jps.internal.credstore.ssp.CsfWalletManager.openWallet(CsfWalletManager.java:177)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.doInit(SspCredentialStore.java:218)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:140)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStore.<init>(SspCredentialStore.java:127)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:115)
         at oracle.security.jps.internal.credstore.ssp.SspCredentialStoreProvider.getInstance(SspCredentialStoreProvider.java:53)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:133)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:128)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:656)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:650)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:650)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:271)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:265)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:136)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1312)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<Jun 11, 2010 1:09:07 PM IST> <Notice> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276241947534> <BEA-000365> <Server state changed to FAILED>
    ####<Jun 11, 2010 1:09:07 PM IST> <Error> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276241947534> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Jun 11, 2010 1:09:07 PM IST> <Notice> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276241947534> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Jun 11, 2010 1:09:07 PM IST> <Info> <WebLogicServer> <PC-AMD40> <AdminServer> <main> <<WLS Kernel>> <> <> <1276241947550> <BEA-000236> <Stopping execute threads.>
    =============================================================================
    your help in this regard is much apprciated.
    Thanks
    Kiran

    Hi,
    i found solution actually i installed forms 11g along with soa suite 11g which was conflicting because forms 11g was 11.1.2 and soa suite domain was 11.1.3
    so i guess its a same issue conflict between PS1 and PS2

  • ITunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed.

    I recently connected my iPhone to my computer, iTunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed - it said insufficient permission.  I have administrative rights... please, any help and/or ideas will be appreciated.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Help - error: 1017: The definition of base class CairngormEvent was not found.

    Hi.
    I've inherited someone else's flex code.  I need to make a small change re-complie and re-deploy, but the IDE (flash builder 4) keeps telling me there's an error in one of the.as files.  Here's the details:
    = Error:
    1017: The definition of base class CairngormEvent was not found.   
    = Code:
    package actionScripts.events {
        import flash.events.Event;
        import com.adobe.cairngorm.control.CairngormEvent;
        public class CairngormGeneralEvent extends CairngormEvent {    
         [etc..]
    Any ideas?
    I'm using Flash Builder 4. Any help would be much appreciated.

    check if the Cairngorm.swc is in the libs folder

  • Error on SQL-DMO ( ODBC Driver data Source name not found)

    I Found the below error and all my maintenance jobs were failing with the same error.
    Do any one have any clue on it. help is much appriciated.
    Microsoft (R) SQLMaint Utility (Unicode), Version ??????
    Copyright (c) Microsoft Corporation.
    [Microsoft SQL-DMO (ODBC SQLState: IM002)] Error 0: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
    Sreeni

    Let us know if you see this issue in SQL 2014 as well. You can quickly create a SQL Server 2014
    Virtual machine on Windows Azure .
    http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-provision-sql-server/
    Thanks, Sethu Srinivasan [MSFT] SQL Server http://blogs.msdn.com/sqlagent -------------------------------------------------------------------------------- This posting is provided &amp;quot;AS IS&amp;quot; with no warranties, and confers no rights.
    Please remember to click &amp;quot;Mark as Answer&amp;quot; and &amp;quot;Vote as Helpful&amp;quot; on posts that help you. This can be beneficial to other community members reading the thread.

  • Error(400,8): method include(java.lang.String, boolean) not found in class

    I have uploaded my Application which was running fine in other IDE to jdev 10.1.3, when i compile the follwing error error in jsp page.
    Error(400,8): method include(java.lang.String, boolean) not found in class javax.servlet.jsp.PageContext
    My jsp code where error is shown is
    <jsp:include page="querySections/generation.jsp" flush="true">
                                            <jsp:param name="TSN" value="<%=strParamValue[1]%>"/>
                                            <jsp:param name="SectionID" value="<%=String.valueOf(lngSectionID)%>"/>
                                       </jsp:include>
    pl help me in solving this its urgent...
    Thanks & Regards
    Lakshmi

    Hi,
    code snippet looks okay and is identical with what JDeveloper generates.
    Frank

  • Error "No automatic updation for IT0008. Allowance Grouping not found"

    I am maintaining IT581 of an employee.but system throws an error -->No automatic updation for IT0008. Allowance Grouping not found.I have maintained allowance grouping properly.The thing is my requirement is that i am maintening pay groups and level in table T710 instead of T510.Not touched T510.
    Means i have also created IT1005(Planned compensation) in OM.Every other thing is ok.Except IT581.
    What i beleive is its taking  assignement from table V_T7INA3.where i am not able to store ESG for CAP, groups and levels.Because its taking value from T510.But i want to do everything on basis of pay scale grade ie T710.
    Need your help and inputs....

    Dear Sumo,
    Kindly update feature 40 ECC which will help to automatic open the IT0008 for autmatic updation of such wagetypes ex: HRA
    you can maintain percentage their for the particular wagetype for
    40ECS - HR-IN : Feature to Determine Elgibility for RAPS
    This feature is used to determine the factor which is multiplied with
    the Reimbursement, Allowance or Perk (RAP) amount to calculate the
    amount payable to the employee.
    rocedure
    The factor can be arrived at by making a decision on the following
    details:
    Country Grouping
    Company Code
    Payscale Grouping for Allowances
    Wage Type
    Gender Key
    Number of children for children education allowance
    Number of children for children hostel allowance
    Personnel Number
    ample
    As per company A's policy, all employees belonging to the Payscale
    Grouping for Allowance MN01, receive twice the amount eligible for
    Childrens' Education Allowance (wagetype M260) in case the employee has
    two or more children.
    1           D   MOLGA
    2   **          &ELIAL=1
    3   40      D   LGART
    4   40 ****     &ELIAL=1
    5   40 M260 D   CEANO
    6   40 M260 *   &ELIAL=2
    7   40 M260 1   &ELIAL=1
    kindly update the same and let me know.
    rgds,
    priyanka

Maybe you are looking for

  • How Do I Delete My Old Apple ID From My iPhone When That ID No Longer Exists?

    I moved, and cancled my internet provider, losing that associated email (email #1). It was the same email I used for my Apple ID. At some point in the unknown past, the only other email adress I have (email #2) was also signed up for a speerate Apple

  • Purchase Order - Header (How to change language - Urgent)

    Dear All, In purchase order header, communication data tab i find a field called Language, which is basically defaulted from the vendor master when the PO is created. I would like to know how i can change the value in this field after the PO has been

  • Exception Queue cleanup.

    hi all, i am using oracle 9i. is there a way to automatically remove messages from the exception queue? if so, what determines when this removal occurs? Thanks ahead, Lior.

  • Collection not handling a duplicated image correctly

    I wanted to have 2 versions of an image - 1 colour (color ;) ), one B&W. Created a duplicate image and took it into photoshop (as I like precise control over my color-B&W conversions) B&W image saved as a tif. So far, all fine. I can see both images

  • Flash CS3 Auto Save?

    I haven't gotten a chance to use the new Flash yet and I was wondering if it had an autosave feature or an auto-backup feature. I've lost a lot of hours from forgetting to save every few minutes, so i was hoping that this may be featured in the new v