Error converting image     get error msg when trying to display thumbnail

Hi there
Me again
I am having some problems displaying thumbnails
I keep getting the error
Error converting image (create thumbnail). The "...........public_html/productimages/thumbnails/" folder has no write permissions.
So I go to my host and change write permissions on the files to 755 and try again and get the same msg
Then I contacted my host and changed the permissions to 777 and I went to the includes config file and changed the permissions to 777 too and still does not work
So I go to my cpanel and check all the files are set to 777 I make a new test page with a dynamic table and show thumbnail behavior and get the same error msgs
So I close DW restart and try again and get the same msg.......
So then I check the file permissions in the DW split screen window when connected to server..... I right click on some files on my server.... namely the 'thumbnails' file and check its permission and it is only set to 755 but in my host it is set to 777
So I try to change ppermissions from DW and get the
"setting access properties failed for: ' error
So what is the correct permissiion..... 755 or 777?
I have read two other posts on this forum and I still cant get to work
Does anyone have any ideas
I have used up all my options and most of my patience
I hope I can get this working asap....
Have a nice day

Try going through the steps in this document:
http://support.apple.com/kb/TS1539
CG

Similar Messages

  • Getting error message when trying to display error messages on a ProfilePage

    Hi All,
    I'm getting following error message when trying to display error on a Profile page.
    On page i'm seeing this:
         org.apache.jasper.JasperException: java.lang.IllegalStateException: getOutputStream() has already been called for this response
              org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:515)
              org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:405)
    In condole, i'm seeing this:
         18:23:00,206 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
              java.lang.IllegalStateException: getOutputStream() has already been called for this response
                 at org.apache.catalina.connector.Response.getWriter(Response.java:621)
                 at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:198)
    Please let me know what could be the reason.
    Thanks,
    Vishnu

    HI David And Nitin,
    Here is the code using which i'm trying to display the error messages on registration page, but this code fragment is outside registration form will that cause any problem?
    <dsp:droplet name="Switch">
      <dsp:param name="value" bean="ProfileFormHandler.formError"/>
      <dsp:oparam name="true">
      <table>
      <dsp:droplet name="ProfileErrorMessageForEach">
      <dsp:param name="exceptions" bean="ProfileFormHandler.formExceptions"/>
      <dsp:oparam name="output">
      <tr style="color: red">
      <td><dsp:valueof param="message"></dsp:valueof></td>
      </tr>
      </dsp:oparam>
      </dsp:droplet>
      </table>
      </dsp:oparam>
      </dsp:droplet>
    Thanks,
    Vishnu

  • HT201209 im trying to download songs from itunes to my pc, and then download onto my kindle fire and it keeps on giving me a  error msg when trying to download songs on itunes?

    im trying to download songs from itunes to my pc, and then download onto my kindle fire and it keeps on giving me a  error msg when trying to download songs on itunes?

    Sync Session Failed to Start iTouch iOS5: Apple Support Communities
    iphone could not be synced sync session failed to start...: Apple Support Communities
    rissaleui562 wrote:
    it says" the ipod "klarissaipodtouch" could not be synced because the sync session failed to start

  • Uninstall won't uninstall apple software update.  I get same msg when trying to install itunes. A problem with this pkg.

    Uninstall won't uninstall apple software update.  I get same msg when trying to install itunes.  Problem with this windows installer pkg.

    Hey NatRgrL!
    Try using the steps in this article to help you remove iTunes properly:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • After downloading Mtn Lion, I get an error msg when trying to use a link in mail.  Says no associated application can be found.  Any suggestions?

    After downloading mountain lion, I get an error message when trying to use a link in mail.  One mail account on the same computer is fine, but not the other one.  Any suggestions?

    I went to the Apple Genius Bar for help.  Somehow when I downloaded Mountain Lion one of the mail accounts on the computer changed from an IMAP account to a POP account.  The POP account doesn't enable the links in email.  It was a quick fix.  Just go to prefrences in your mail account and change it to an IMAP account.  Hope this works for you as it did for me. 

  • I always get the following error msg when trying to update add-ons "Invalid file hash (possible download corruption) -261"

    I get the following error msg when I try to update add-ons ...
    ErrorFirefox could not install the file at
    http://releases.mozilla.org/pub/mozilla.org/addons/1865/adblock_plus-1.2.2-fx+sm+tb+fn.xpi
    because: Invalid file hash (possible download corruption)
    -261
    Why, and is there a solution. Im fully patched on osx.
    + Fredrik

    * "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    You can also try to enable third-party cookies<br />
    Firefox > Preferences > Privacy > Cookies: [X] "Accept third-party cookies"
    See [[Disabling third party cookies]] (you need to enable)

  • 2 items: 1) importing cvs columns do not match t-bird columns 2) error msg when trying to add 2nd email account

    Hi and thanks in advance for lending a hand.
    Issue #1
    Followed instructions at https://www.youtube.com/watch?v=8Df8mRL3TBs to import cvs to t-bird – but
    My cvs headings are not name, email m chat name, org, additional email etc etc
    Why are my columns names not showing up?
    +++++++++++++++++++++++++++++++++++
    Issues #2
    Adding second email address in thunder bird
    email address #1 works fine - but trying to add 2nd one – having error msgs poop up.
    1st error msg is:
    [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIMsgIncomingServer.verifyLogon]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://messenger/content/accountcreation/verifyConfig.js :: verifyLogon :: line 98" data: no]
    Pressing “done" again yields different error reply: Incoming server already exists.
    [end of error msgs]
    Have tried box1121.bluehost.com as well as mail.bikempowered.com for server hostnames - various ports and SSL’s
    The Tech at blue host claimed there this was a bug known to thunderbird – and that a solution is known to be needed.
    Seeking solutions - also I’m 90% Luddite - so please if at all possible, but things in “for Dummies” mode
    With gratitude and hope,
    Brian

    About .csv check your .csv-file as a text file.
    Is the first line your column-names separated with a "," ?
    It should be. When you import, mark that 1st line has column-names
    Then move Tbird's names around until they correspond with yours. Your names will not be imported.

  • I am getting an error msg when trying to sync with I Tunes???

    I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes.  This just started today
    Also would like to know how to find my passcode for Restrictions without restore the whole phone.

    I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes.
    http://support.apple.com/kb/TS3221
    Also would like to know how to find my passcode for Restrictions without restore the whole phone.
    Not possible, and since the Restrictions Passcode is included with your iPhone's backup, you must restore the iPhone as a new iPhone or not from the backup.

  • I'm getting an error msg when trying to redownload purchases to new Mac?

    The error I am getting is:   "There was a problem downloading "blah blah blah". You do not have the privilege to make changes.
    Please check that the connection to the network is active & try again."
    I have tried everything and I am still unable to download anything (even new purchases) through  the iTunes store anymore.

    I am now getting an error msg (0xE8000065) when trying to sync with I-Tunes.
    http://support.apple.com/kb/TS3221
    Also would like to know how to find my passcode for Restrictions without restore the whole phone.
    Not possible, and since the Restrictions Passcode is included with your iPhone's backup, you must restore the iPhone as a new iPhone or not from the backup.

  • I get a "Too many recipients" Thunderbird error msg when trying to send a group email -- how many is too many ? does Thunderbird have a limit?

    My ISP says it doesn't impose a limit on the number of recipients in a group email, BUT still I get a Thunderbird error msg. Why?

    Well, no, because 4 or 5 times a year, someone writes in with pretty much exactly your question because they too have had a message refused with the "too many recipients" warning. We suggest they use a Mailing List and all is well.

  • I get the following error msg when trying to send iphotos to friends/family: The email server didn't recognize your username/password combination.

    I get the following msg whenever trying to email iphotos to friends/family. Can anyone help? TX
    ..."The email server didn’t recognize your username/password combination."

    iPhoto Menu -> Preferences -> Accounts ->
    Delete and recreate your email settings.
    Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

  • "Lock table overflow" error msg when trying to change a repot program

    hi ABAP experts,
    We are getting the following error msg
    "Lock table overflow
    Choose 'Display object' or 'Cancel'.".
    Click the question mark on the same error msg window, then the detailed error msg would like this:
    Message no. MC603
    Diagnosis
    This table overflowed when trying to enter SAP locks in the lock table.
    System Response
    The locks could not be set.
    Procedure
    Contact your system administrator. If this error occurs frequently, change the size of the profile parameter 'enque/table_size'. This parameter defines the size of the lock table in KByte.
    What would be the reason and how to resolve this problem?
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Apr 2, 2008 1:03 PM

    Hi,
    This could be bcos the lock table is getting overflowed beyond the allotted space. Check if any other program/BAPI is causing continuous creation of locks.
    To analyze choose (SM12) Extras Statistics to display the statistics. These are the statistics that have been compiled since the last time the lock server was restarted.
    Check the below link for more information on SAP Lock Concept.
    http://help.sap.com/saphelp_nw04/helpdata/en/7b/f9813712f7434be10000009b38f8cf/content.htm
    For details on Subsequent Analysis of Lock Table Overflows, check the below links.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/43d2416d9c1c7be10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/b57338788f4d72e10000009b38f8cf/content.htm
    Hope this helps. <REMOVED BY MODERATOR>
    Thanks,
    Balaji
    Edited by: Alvaro Tejada Galindo on Apr 2, 2008 1:03 PM

  • Error Msg when trying to open PDF

    When i try to open the pdf I keep getting an error msg that states "Warning: This form is not supported with the current version of Acrobat or Adobe Reader. Upgrade to the latest version for full support" but I only just downloaded this app today.  Is there another version or an upgrade that I'm not finding?

    This is on my Ipad

  • Error msg when trying to connect

    I am getting an error msg "iTunes cannot connect to Nike+ unknown error 1302. Nike+ techhelp said call apple support. So before I call them has anyone else had problem of iTunes not connecting to Nike+ account?

    Played with diagnostics and somehow resolved the problem I hope. I will know when I use pedometer next and try to upload data. Thanks for reading this.

  • Windows 7 PC error msg when trying to (re)install Adobe Reader

    After manually cleaning up my HD to make room, I'm thinking that could be the reason, but I don't remember uninstalling any Adobe products. The error msg is as follows: "Windows installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update". Please help me workaround this to install it properly. Thx

    I suggest that you uninstall any remains of existing Reader versions using http://labs.adobe.com/downloads/acrobatcleaner.html then download and run the installer from http://get.adobe.com/reader/enterprise/

Maybe you are looking for

  • MM-1 (Bower&Wilkins) USB speakers problems with OS Mavericks

    Hi, I use USB speakers, rather fine ones. MM-1 (Bower&Wilkins) With Mountain Lion, everything was good. Ever since I switched to Mavericks, I have all sorts of problem with them. In lin- in mode, everything is ok, but in USB mode: I loose all audio s

  • Someone Hacked my apple Id

    Hello, i need help my apple id been hacked and the person keeps downloading stuff and changing my passwords. help

  • During MI07 Post Differnce, can we control Movement Type authorisation?

    Dear all During the MI07 to post difference during physical inventory, users are asked to choose  the  Movement Type with Reason Code: (a) If it is a gain, use the reason code for movement type u2018701u2019. (b) If it is a loss, use the reason code

  • Time format is showing wrong at query level

    hi, i have a problem at query level i have two time fields which are key figures i have calculated key figure which has a formula cal kf =  time (tim1- tim2) data at the dso level flightno              time1                 time2             f001    

  • Error while upgrading Oracle Portal to 10.1.4.

    While upgrading Oracle Portal to 10.1.4 , I am getting the following error. Error: Database version 9.0.1.5.1 is not supported MRUA detected an error at C:\oracleportalupgrade\mrua_051020\mrua\mrua.pl line 212. Please let me know how can I resolve th