ERROR Copy HRFORMS

Hi!
I'm trying to copy a HRFORM and it isn't copied and I get the error:
Internal error occurred in SAFP API
Message no. HRFORMS002
Kind regards,
Julian.

Hi Raghu,
When I run the report FP_PDF_TEST_00, I get the error:
USAGE ERROR
ERROR CODE : 2
ERROR MESSAGE : ADS
Invalid HTTP connection: ADS
How I should fix this error?
Kind Regards,
Julian.

Similar Messages

Error copying application.xml icons: .../bin-release/assets/icons' does not exist

Hi,
Whenever I try to export the release build I get error from COmpiler during the process that "Error copying application.xml icons: Resource '/Project_Name/bin-release/assets/icons' does not exist." I have specified 4 icons in the -app.xml file of sizes 16,32,48,128 which exist in the path specified and files are not corrupt. I have checked and unchecked the compiler directive "Copy non-embedded resources in the Output file" but that has not helped too.
Can somebody please advise what do I do in this situation?
We are using
FB4 with Flex Hero(4.5) SDK and java heap space specified in .ini files is 1224m
This is somewhat urgent guys...
Thanks
Shubhra

Frank,
Thank you for your answer. I had not checked (will do so tonight).
I had considered it adequate to wipe out the entire system directory (thereby wiping out the integrated weblogic server), but perhaps it was not adequate? I did not specify that this is on the integrated server, but that is the case....
Stuart

Error copying file when reinstalling Windows

I saw where someone had posted a similar question, but saw no answers. Anyway, IBM sent me a set of recovery disks and a new hard drive (unit it still under warranty) and when I try to reinstall using the recovery disks provided, it stops during disk 2 of 6. The progress bar stops just short of the end of it, and the total progress bar stops about 1/3 of the way through. I used an identical set to reinstall the operating system (IBM sent me two hard drives and two sets of recovery disks, one for each unit) on an identical machine and had the same problem. I received this error message each time in a "recov32" window that popped up:
An error copying file D:\RECOVERY\CM2ZCUS.002
ERROR 23: DATA ERROR (CYCLIC REDUNDANCY CHECK).
What does this mean and how can I resolve it? When I hit "OK", it goes on to ask for disk 3 of 6, and so on.
And while attempting the installation on both systems, it asked for a supplemental product recovery disk (the disk says product recovery supplemental disk) just prior to insertion of disk 1 of 6.....I put that disk in the drive and scant seconds later., then iit asks for it again after disk 6 of 6 has been installed. Is that normal? Then when it tells me to power up again, I can't do it using the restart button on that page.....the window is not responsive and i have to it shut it down buy manually pressing the on button. Appears to repeat the installation all over again.
At any rate, both installations have not been successful in restoring Windows XP Professional on these machines, and I'm in dire need of a solution!!
moderator note: edited post to proper sentence case for readability. please do not post in all caps as it makes things impossible to read. any further posts in all caps will be deleted without warning.

Sorry about the caps....didn't realize it'd be difficult to read.
Anyway, regarding the possibility of scratched/damaged setup disks......I have two sets, one for each laptop, and both give me the error when I try to reinstall. Seems pretty coincidental that both sets would be damaged, unless IBM makes it a habit to send out faulty software. But I tried again, got the same error when Disk 2 was installing....I went ahead and clicked OK, it asked for the third disk and darned if it popped up with the same error, but with a different file (BKD047A.IMZ). However, I'm continuing the installation in spite of the errors, but don't hold out much hope that it will be successful. If it isn't, I'll try a set of XP Pro boot disks. If that fails, I'll try an installation CD for another laptop. After that, I don't know, unless I call IBM again and have them send me replacements for the two sets of disks. Unless anyone else has another idea??

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me?

Windows 8.1 Network Share 0x8007003b Error Copying Files

Hi All,
I'm having an issue when copying files from a Windows network share. If the file is above 5MB it will start copying and then after a minute or two I will get an error such as:
Interrupted Action
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x8007003B: An unexpected network error occurred.
The network share is in a different office and is accessible over a point-to-point VPN, so the connection is not that fast.
But before everyone tells me to start diagnosing the router and or VPN please take note of the following:
My colleague who is running Windows 7 can copy files from the network share fine
If I run a Windows 7 VM on my Windows 8.1 laptop I can copy the files across fine
I also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client
VMs to a similar speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
There is also a noticeable difference visually when copying using Windows 8.1 and Windows 7:
Windows 7 - The progress bar progresses smoothly giving the current speed and estimated time remaining
Windows 8.1 - The progress bar progresses in a jumpy fashion. E.g. it shows no progress, then after a minute it jumps and shows 16% progress, then shows no further progress, then jumps by another 18%. There is no estimated time remaining.
I ran Wireshark to investigate what was going on at the network layer. I see the following behaviour:
Windows 8.1 - The file is copying fine then all of a sudden there are a lot of TCP dupack packets. After which the Windows 8.1 client sends a RST packet and then the error pops up.
Windows 7 - The file is copying fine then you also see a load of TCP dupack packets, however no error is displayed and it continues copying fine.
I'd appreciate any help with this I'm hoping there are some settings I can change to make Windows 8.1 behave more like Windows 7!
FYI originally posed here (but was advised to ask on Technet) - https://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-81-network-share-0x8007003b-error-copying/300bc9a4-597b-402a-b885-9dd6f6fb51a2
Thanks,
Zak

Hi MeipoXu,
Sorry, it has taken me so long to reply. I thought I had subscribed to receive updates on this thread, but I didn't see anything!
I've ran the commands you gave but some of them did not work, I got the following error:
Set global command failed on IPv4 The parameter is incorrect.
However, output of current settings are below.
TCP Global Parameters
Receive-Side Scaling State : disabled
Chimney Offload State : disabled
NetDMA State : disabled
Direct Cache Access (DCA) : disabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled
Initial RTO : 3000
Receive Segment Coalescing State : disabled
Non Sack Rtt Resiliency : disabled
Max SYN Retransmissions : 2
To answer your original questions.
Do you mean the file below 5 MB will copy fine ?
5MB is not a hard limit. If the file is small enough it will copy before it errors out. A file of around 5MB or so fails with an error.
Have you tried to copy the files from another Windows 8.1 machine (This will help us to verify whether the issue is casued by the specific machine)?Have you tried to copy another file from the network share to have a check ?
Yes I've tried from another Windows 8.1 machine and have the same behaviour. It is the same with different files from the network share. And the same with different network shares.
I am seeing nothing in the event viewer when the error occurs. I do not believe this to be a VPN issue because I can recreate this situation perfectly. As I mentioned in the original post- I
also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client VMs to a similar
speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
Basically, I had virtual machines all on the same local network. One virtual machine was hosting a file share with files on it. I created one Windows 7 VM and one Windows 8.1 VM. Using VMWare Workstation you can limit the network bandwidth to the VMs. When
I did not limit the network bandwidth I could copy all files of all sizes fine. However, when I limit the network bandwidth to a speed of around 30-50KBps, the Windows 8.1 VM fails to copy files with the same error. But Windows 7 VM copies the files fine.
The point of limiting the bandwidth in this way is to create a similar scenario to that I see when connecting over the VPN.
This all leads me to believe there is some sort of issue with copying files from fileshares over slow connections using Windows 8.1.
Cheers,
Zak

I'm getting error "copying files failed. the required file is in use". How do I find the file?

I've found this question is elswhere but no answers. I'm trying to consolidate my library to an external hard drive since I'm pretty sure my current drive is about to fail. The entire process has taken me days due to one error or another. This is my most recent error and so far there is no way around it since it does not show me what file is in use.
Help?

I used "Carbon Copy Cloner" to copy my library from one external disk to another.
The "library" consists of a bunch of files and folders (see links at end). You don't need CCC to copy it, just drag the whole iTunes folder in your Home > Music from one drive to the other.
I pointed my iTunes library to the new location under iTunes preferences.
No, don't do it with preferences. Once you have moved the folder as above, start iTunes with the option key held down and guide it to the library.itl file on the new drive. This is assuming you have been using iTunes's default settings and haven't been managing your media yourself.
I used iTunes to "Consolidate Library" to verify that all files had been moved.
Okay, in doing that you have moved just your media to the new drive but left all your other library files on the old drive.
iTunes succesfully copied/re-attached a lot of files before giving me the error that the disk could not be read or written to.
Try it with my method.
I began to troubleshoot the hard drive by checking the cables and scanning for errors.
This disk checked out fine.
I identified the failure and subsequent error was due to corrupted files.
I watched the consolidation process and was able to see which file it was trying to copy before it errored out.
I deleted the corrupted file and restarted the process (I repeated this numerous times).
When the process seemed to be just about over, I got the error "Copying files failed. The required file is in use."
I'm sure this is likely another corrupted file, however, it happens so fast that I have no way to identify what file is causing the problem. I tried making sure no other processes were running and no other windows or media players were open. I also tried to look for an error log but was unsuccessful.
Any ideas?
Disk Utility will scan for a corrupt directory but I don't think it works on the file level if it is a single file that was corrupted. I know I have seen Carbon Copy Cloner pick up on single file error when I had one sitting on a bad sector of a drive several years ago. If you can identify the corrupt file this way then you will have to use a backup copy since it is unlikely it can be rescued.
If you have Diskwarrior it has a file check utility.
You have, of course, restarted your computer before doing all this, and keep other computer activity to a minimum (don't play music while copying the files and don't use other applications that coupld potential be trying to get access to your files)?
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

6500 Classic Bluetooth Problem - 'error copying fi...

Hi,
I seem to have hit a bit of a problem with my Nokia 6500c and have really been struggling to find a solution.
My desktop PC (Windows XP)has a USB Bluetooth Dongle which was initially used with Microsoft Drivers. Everything worked fine and I was able to transfer files both to and from the 6500c, however, the Microsoft Drivers seemed to only offer limited facilities.
I therefore installed the software / drivers provided with the dongle - Widcomm / Broadcom. Again everything appeared to work fine however, when I 'right click' any file on my PC and select 'send to bluetooth device - Nokia 6500' I receive a message 'error copying file'.
The devices have been succesfully paired and if I browse the phone's files and copy / paste or drag and drop the same file to no errors occur.
Everthing else on the bluetooth connection works without a problem.
Any suggestion would be appreciated.

Hi Yoshi,
Thanks for the reply - the Microsoft drivers / software were fully unistalled before I installed the Widcomm / Broadcom software and drivers. When using the microsoft package the dongle shows as a bluetooth radio device, installs 'darfon' drivers for the bluetooth device and uses generic microsoft drivers for the bluetooth enumerator. The Widcomm / Broadcomm package recognises the dongle as simply a bluetooth device with all facilities operating under broadcom drivers.
I actually think the problem relates to the make of dongle and the 6500c not being fully compatable as I have now tried using the Widcomm software with other phones and a laptop all of which are fine. I have also tried using the phone with other PCs which are not using the microsoft package and all is fine.
The dongle I am using is:-
http://www.ebuyer.com/product/122940

IDOC Error - Copy Sender from Payload: Sender Is Missing in Payload

Hi,
I have following scenario.
SOAP adapter ---> PI   -
> IDOC Receiver -
> ECC
THe IDOC has a required node that is disabled and IDOC revicer communication channel has checkd following options.
Apply control record value from pay load
Take Sender from Payload
The soap message is mapped to IDOC structure. While testing I received following error.
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Copy Sender from Payload: Sender Is Missing in Payload</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error: Copy Sender from Payload: Sender Is Missing in Payload</SAP:Stack>
If you have seen similar error and please let me know how to trobleshoot. I appreciate your help.
Thank you,
Balaji

Thank you for the response. I can enable EDI_DC40 segment and map required following values.
·        SNDPRN
·        SNDPRT
·        SNDPFC
·        RCVPRN
·        RCVPRT
However as we move transports to different environemnts the above values changes and I can't hard code in the mapping.
My questions is how can I map these values such that when transport moves across different environemtns the mapping valaues are still good. Please let me know.
Dont enable EDI_DC40 and dont select take sender ,receiver from pay load option,apply control record values from pay load.
this case IDoc adapter reads values from configuration time andno problem after trasporting to quality or prod.
Regards,
Raj

Error Copy Sender from Payload Sender is Missing in Payload

Hello,
we have a IDOC -> ccBPM -> IDOC scenario on PI7.0 SP12.
Since SP12, we have problems in sending the ALEAUD IDOCs from the ccBPM to the R/3 getting the LUW stucked in the queue showing the error "Copy Sender from Payload: Sender Is Missing in Payload".
In the XML for the ALEAUD the fields SNDPOR, SNDPRT and SNDPRN are filled correct and it has been working with older SP. The comm. channel is configured to take the sender from the payload and we really nead this as we send the IDOC from the ccBPM.
Does anyone has similar problems or knows about other restrictions which may cause this error?
Regards,
Dirk

Hello,
SAP solved the problem by releasing a patch.
If this problem also occurs on your machine then check the SAP note 1154710.
Regards,
Dirk

ITunes library consolidation error: "Copying files failed. An unknown error occurred (-50)."

My iTunes library has outgrown the HDD on my iMac, so I've started to migrate it over to a Synology NAS. The iTunes Media folder is set to the NAS, but when I attempt to consolidate the library the operation fails each time with the error: "Copying files failed. An unknown error occurred (-50).
I have found this references to this error in the communities from Windows users, but I only use Macs.

Just trying to give this topic a poke as I am having a similar issue.
I am rebuilding my library that was on an external drive. I had a backup of much of the files, but not a direct backup of the iTunes media folder, as well I am now moving it to a new iTunes Media directory on a Synology 1813+ NAS running DSM 4.3 vs. a USB attached drive.
I have followed all of the correct procedures to move the media directory by using the tools within iTunes, and that all worked perfectly.
So far iTunes has been able to locate most of the music files through its own processes. Once it completed that process I then initiated "Consolidate files" to move the found files to the new iTunes Media directory on the new NAS.
I am led to believe that the issue is with a specific file that causes the copy process to stop, but I don't know how to capture what file it might be.
I am not seeing anything relevent in the console log.
Hoping someone can throw me some ideas...
iTunes 11.1.2 (32) - iMac 2.8GHz Intel Core 2 Duo 4GB RAM - OS X 10.8.5

Distribution build unsuccessful error copying files

Error copying files.
Source: C:\Testsys\SOFTWARE\UTILS\CALCULATE DP.vi
Destination: C:\Testsys\Software\Distribution\CALCULATE DP.vi
Invoke Node in AB_Source_VI.lvclass:Copy_SourceItem.vi->AB_Build.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
<APPEND>
Method Name: <b>Set Path</b>
Error 1357 occurred at AB_Source_VI.lvclass:Copy_SourceItem.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: A LabVIEW file from that path already exists in memory, or exists within a project library already in memory.
How do I resolve this?
Attachments:
error.JPG ‏53 KB

Thanks for the reply. I was able to solve this particular issue by renaming the specific file that was causing the hangup. Unfortunately it leaves me bewildered as the name WAS "CALCULATE DP.VI" and now IS "CALCULATE_DP.VI". This was the only difference that allowed the build to go forward, even thought the original name does not violate naming conventions.
This was while building a .llb distribution. On a related note, even though this build was successfule, the subsequent build of an executable went through without error, however some dynamic VIs, were not functioning and others were, when the executing the application. The dynamic VI causing the problem was also the caller for the above "CALCULATE DP.VI". Two of four dynamic VIs would respond to their call, and two would not, one of which was dependedn on "CALCULATE DP.VI" caller. All dyanmic VIs were placed in the .llb and set as always included, etc. The solution was to place an explicit call to the .llb to guarantee that it could be found by the application at run time.

Error: Copy sender from payload: Sender not in payload

Hi all.
I generated a new WSDL with XI. when i posted it with XML Spy in SXI_MONITOR got this error:
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Copy sender from payload: Sender not in payload</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Copy sender from payload: Sender not in payload</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
WSDL could be wrong?
Rgds
RP

Hi,
it's not a WSLD error it's IDOC
have a look at my answer here:
Re: Error: Sender Not in Payload
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

ORA-01339: LogMiner BUILD: Error copying system catalog metadata to LogMiner

Hi, has anyone ever got this error in 11.2.0.3 primary database while trying to convert a physical standby to a logical standby?
Thanks

Per the documentation:
4.2 Step-by-Step Instructions for Creating a Logical Standby Database
Creating a Logical Standby Database
4.2.2 Stop Redo Apply on the Physical Standby Database
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
4.2.3.1 Prepare the Primary Database for Role Transitions
Has you adjust primary database init.ora parameters to be prepared for switchovers.
4.2.3.2 Build a Dictionary in the Redo Data
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
this puts a Multi-vertion Data Dictionary (MVDD) is the archive logs that are sent to the standby.
This is what fails with:
SQL> exec dbms_logstdby.build ;
BEGIN dbms_logstdby.build ; END;
ERROR at line 1:
ORA-01339: LogMiner BUILD: Error copying system catalog metadata to LogMiner dictionary
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 5972
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 6070
ORA-06512: at line 1
4.2.4.1 Convert to a Logical Standby Database
SQL> SHUTDOWN ABORT;
SQL> STARTUP MOUNT EXCLUSIVE;
SQL> ALTER DATABASE RECOVER TO LOGICAL STANDBY db_name;
this consumes the data dictionary into the standby for convertion. It is used by SQL apply to understandby object id's because the standby does not know the names of the objects that are in the primary database.
then you add some logical standby parameters and open the database and start SQL apply.
SQL> ALTER DATABASE OPEN RESETLOGS;
SQL> ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
So running EXECUTE DBMS_LOGSTDBY.BUILD; is a standby alone process that can be tested any time. It does nothing to the primary except extract dictionary information and puts it in the archive logs.
I find no information on DBMS_LOGSTDBY.BUILD; ever failing. It must be specific to this primary database.
Thanks

SunMC Error Copying XML APIS

Hello,
I'm installing Sun Manager Center 4.0 over Solaris 10 8/07, but immediatly it begin instalation, fails. I get this error in the log file:
*"Error copying XML APIs to /var/run/tmp/SunMCInstall/XML/APIs"*
Please help.

I am also getting this error.Do you have any answer for why you are getting this error because i dont see any solution for this topic. i am using sparc and solaris 10 too.

Error "Copying statuses in modifuication mode not allowed, see F1 help"

Hi,
I am copying the status EXT_ALV_GRID_NEW of program to a Z status for the same program saplkaep
I am facing the error Copying statuses in modifuication mode not allowed, see F1 help
Could any one explain how to solve the problem.
Please

Hi,
Try to switch of modification assistant using following path.
Edit->modification operations->Switch off modification assistant.
KR Jaideep,

ERROR Copy HRFORMS

Similar Messages

Maybe you are looking for