Error copying production folder

Hello everyone. I'm hoping someone can help. The following query comes from a discussion forum I am on at work (school) and I thought someone here might be able to help. I actually don't know what the fellow is talking about so.... hopefully some of you will and will reply and I will be able to help him out. Here is his query: (thanks for your help)
We use four emacs for video editing. At the moment we just use iMovie and
things work fine, except that when I want to back up student work I
receive
an error on trying to copy the production folder from its location in
Movies
to our USB drive. Detaisla re as follows:
You cannot copy some of these items to the destination because their names
are too long or contain invalid characters for the destination. Do you
want
to skip copying these items and continue copying the other items?
I usually quit the processes, go into the media folder and copy the files
over manually. It seems the error only appears when I try to copy the
folder. The copy of the folde ris created, some files are copied, then
this
error. Obviously something Macish I have no idea about.
How do other schools back up their Mac iMovie productions?

Hi Jenny,
two reasons for such an behavior...:
a) iMovie cannot work with usb(2) connected drives... (usb cannot handle singles files that large)
b) iMovie needs "MacOsExtended" drives, not FAT-formatted... what, for sure that usb drive is.... same here, the specific file struture of iM projects cannot be handled by such drives (you can format any drive to MOE with Disk Utility, but any data gets lost while that process!)
to back up iM projects, you need to have a firewire connected harddrive which is MacOsExtended formatted... in the next PC shop you get'em cheap, format with Disk Utility - Boom!Done...
school? I used slate&chalk to store school projects.........................
besides: I usually quit the processes, go into the media folder and copy the files over manually. ... sorry, but that is some dangerous, wrong usage of a Mac! iM has a very fragile file structure, you move whole project folders/iMovie packages, not the single media content, you damage projects that!... that "sysAdmin" risks the work of your scholars, he/she should read a Mac book... never let Windows Admins touch a Mac!! Macs don't need Admins at all ;-)))

Similar Messages

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, it is throwing error "The product distribution file could not be verified. It may be damaged or not signed".

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

GL2DW-Error copying .lbi file

I've followed all the tips to copy Components from GL9, and while it apparently is successful with one of my components, I get an Error copying <new website>/<filename>.lbi and the GL2DW quits, without finishing what it's supposed to do (i.e. create the .ste file to import into DW). So I'm stuck right now and wonder what to do? <br /><br />Is anyone at DW watching these threads? If so, I'm really amazed at the poor execution of what seems to be a vital process of conversion from one of your products to a newer one. I don't have any other choice of how to bring a site into DW, as I don't know how to create the .ste file to use in Manage Sites... PLEASE HELP ASAP!

Hi Ben,
I've got past this point at last - it's very odd but the GL2DW found every component that I'd created and deleted from years ago. I think thats why it keeps stalling for so long. Every time it came up with an error I clicked Ok and it went on to the next. This was over a couple of hours and eventually it finished with an error on the last of the components.
On checking the folder to which all these were to be written I found the working components were indeed all there - even those of old (although they were not functional).
I found no STE file so Imported the site folder via DWs Site manager and I now have a working site.
Very long winded I know but thats what worked for me.
I hope this is of help, but if someone has a quicker remedy I look forward to reading it as this is the first of several v large sites I have to convert..
Chris

Error reading product file driver files

When attempting apply a large merge patch I receive the following error:
Screening out files not valid for this installation...
Determining valid on-site files...
AutoPatch error:
The following file is missing:
/oracle/prodappl/pa/11.5.0/admin/driver/pasb038.drv
AutoPatch error:
Error reading product file driver files [complete; make tapes]
AutoPatch error:
Error determining valid on-site files
Any ideas?
I've tried using options=noprereq option, but that didn't help.

- Try to restore the file from a backup you have Or just copy it from any other environment.
- Make sure that you have included all pre-req patches in the merged file.
I've tried using options=noprereq optionBy this you tell adpatch not to check for pre-req, use 'options=prereq' instead.

Error copying file when reinstalling Windows

I saw where someone had posted a similar question, but saw no answers. Anyway, IBM sent me a set of recovery disks and a new hard drive (unit it still under warranty) and when I try to reinstall using the recovery disks provided, it stops during disk 2 of 6. The progress bar stops just short of the end of it, and the total progress bar stops about 1/3 of the way through. I used an identical set to reinstall the operating system (IBM sent me two hard drives and two sets of recovery disks, one for each unit) on an identical machine and had the same problem. I received this error message each time in a "recov32" window that popped up:
An error copying file D:\RECOVERY\CM2ZCUS.002
ERROR 23: DATA ERROR (CYCLIC REDUNDANCY CHECK).
What does this mean and how can I resolve it? When I hit "OK", it goes on to ask for disk 3 of 6, and so on.
And while attempting the installation on both systems, it asked for a supplemental product recovery disk (the disk says product recovery supplemental disk) just prior to insertion of disk 1 of 6.....I put that disk in the drive and scant seconds later., then iit asks for it again after disk 6 of 6 has been installed. Is that normal? Then when it tells me to power up again, I can't do it using the restart button on that page.....the window is not responsive and i have to it shut it down buy manually pressing the on button. Appears to repeat the installation all over again.
At any rate, both installations have not been successful in restoring Windows XP Professional on these machines, and I'm in dire need of a solution!!
moderator note: edited post to proper sentence case for readability. please do not post in all caps as it makes things impossible to read. any further posts in all caps will be deleted without warning.

Sorry about the caps....didn't realize it'd be difficult to read.
Anyway, regarding the possibility of scratched/damaged setup disks......I have two sets, one for each laptop, and both give me the error when I try to reinstall. Seems pretty coincidental that both sets would be damaged, unless IBM makes it a habit to send out faulty software. But I tried again, got the same error when Disk 2 was installing....I went ahead and clicked OK, it asked for the third disk and darned if it popped up with the same error, but with a different file (BKD047A.IMZ). However, I'm continuing the installation in spite of the errors, but don't hold out much hope that it will be successful. If it isn't, I'll try a set of XP Pro boot disks. If that fails, I'll try an installation CD for another laptop. After that, I don't know, unless I call IBM again and have them send me replacements for the two sets of disks. Unless anyone else has another idea??

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me?

Error message: The folder (you are trying to move) contains the catalog

II am trying to move a catalog to an external HD. I am getting an error message: The folder (names folder) contains your LR catalog and cannot be moved while LR is running.
How can i move the folder within LR without LR running or if I move the catalog out of the folder in MAC Finder, will it impact the synchronicity of the file pATH? Where should the folder containing the catalog be kept? I keep some separate catalogs by year because of the amount of photos that they contain and I "store the catalog file within the LR folder on the HD

Copy the catalog with Finder to the external. Copying the previews also is optional because if you don't LR will make new ones, but copying over the Previews.lrdata folder to the same location will save time. This is done with LR off. Now double click on the external catalog .lrcat file and LR will launch. After verifying that the new catalog is functioning properly, you can delete the old one from the internal.

Windows 8.1 Network Share 0x8007003b Error Copying Files

Hi All,
I'm having an issue when copying files from a Windows network share. If the file is above 5MB it will start copying and then after a minute or two I will get an error such as:
Interrupted Action
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x8007003B: An unexpected network error occurred.
The network share is in a different office and is accessible over a point-to-point VPN, so the connection is not that fast.
But before everyone tells me to start diagnosing the router and or VPN please take note of the following:
My colleague who is running Windows 7 can copy files from the network share fine
If I run a Windows 7 VM on my Windows 8.1 laptop I can copy the files across fine
I also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client
VMs to a similar speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
There is also a noticeable difference visually when copying using Windows 8.1 and Windows 7:
Windows 7 - The progress bar progresses smoothly giving the current speed and estimated time remaining
Windows 8.1 - The progress bar progresses in a jumpy fashion. E.g. it shows no progress, then after a minute it jumps and shows 16% progress, then shows no further progress, then jumps by another 18%. There is no estimated time remaining.
I ran Wireshark to investigate what was going on at the network layer. I see the following behaviour:
Windows 8.1 - The file is copying fine then all of a sudden there are a lot of TCP dupack packets. After which the Windows 8.1 client sends a RST packet and then the error pops up.
Windows 7 - The file is copying fine then you also see a load of TCP dupack packets, however no error is displayed and it continues copying fine.
I'd appreciate any help with this I'm hoping there are some settings I can change to make Windows 8.1 behave more like Windows 7!
FYI originally posed here (but was advised to ask on Technet) - https://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-81-network-share-0x8007003b-error-copying/300bc9a4-597b-402a-b885-9dd6f6fb51a2
Thanks,
Zak

Hi MeipoXu,
Sorry, it has taken me so long to reply. I thought I had subscribed to receive updates on this thread, but I didn't see anything!
I've ran the commands you gave but some of them did not work, I got the following error:
Set global command failed on IPv4 The parameter is incorrect.
However, output of current settings are below.
TCP Global Parameters
Receive-Side Scaling State : disabled
Chimney Offload State : disabled
NetDMA State : disabled
Direct Cache Access (DCA) : disabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled
Initial RTO : 3000
Receive Segment Coalescing State : disabled
Non Sack Rtt Resiliency : disabled
Max SYN Retransmissions : 2
To answer your original questions.
Do you mean the file below 5 MB will copy fine ?
5MB is not a hard limit. If the file is small enough it will copy before it errors out. A file of around 5MB or so fails with an error.
Have you tried to copy the files from another Windows 8.1 machine (This will help us to verify whether the issue is casued by the specific machine)?Have you tried to copy another file from the network share to have a check ?
Yes I've tried from another Windows 8.1 machine and have the same behaviour. It is the same with different files from the network share. And the same with different network shares.
I am seeing nothing in the event viewer when the error occurs. I do not believe this to be a VPN issue because I can recreate this situation perfectly. As I mentioned in the original post- I
also know it isn't an issue with this particular file share. I set up a little lab, where I had one VM which had a shared folder and 2 other client VMs one running Windows 7 and one running Windows 8.1. I limited the bandwidth to the two client VMs to a similar
speed we see across our VPN. The result was that the Windows 8.1 failed with the same error above, whereas the Windows 7 copied fine.
Basically, I had virtual machines all on the same local network. One virtual machine was hosting a file share with files on it. I created one Windows 7 VM and one Windows 8.1 VM. Using VMWare Workstation you can limit the network bandwidth to the VMs. When
I did not limit the network bandwidth I could copy all files of all sizes fine. However, when I limit the network bandwidth to a speed of around 30-50KBps, the Windows 8.1 VM fails to copy files with the same error. But Windows 7 VM copies the files fine.
The point of limiting the bandwidth in this way is to create a similar scenario to that I see when connecting over the VPN.
This all leads me to believe there is some sort of issue with copying files from fileshares over slow connections using Windows 8.1.
Cheers,
Zak

I'm getting error "copying files failed. the required file is in use". How do I find the file?

I've found this question is elswhere but no answers. I'm trying to consolidate my library to an external hard drive since I'm pretty sure my current drive is about to fail. The entire process has taken me days due to one error or another. This is my most recent error and so far there is no way around it since it does not show me what file is in use.
Help?

I used "Carbon Copy Cloner" to copy my library from one external disk to another.
The "library" consists of a bunch of files and folders (see links at end). You don't need CCC to copy it, just drag the whole iTunes folder in your Home > Music from one drive to the other.
I pointed my iTunes library to the new location under iTunes preferences.
No, don't do it with preferences. Once you have moved the folder as above, start iTunes with the option key held down and guide it to the library.itl file on the new drive. This is assuming you have been using iTunes's default settings and haven't been managing your media yourself.
I used iTunes to "Consolidate Library" to verify that all files had been moved.
Okay, in doing that you have moved just your media to the new drive but left all your other library files on the old drive.
iTunes succesfully copied/re-attached a lot of files before giving me the error that the disk could not be read or written to.
Try it with my method.
I began to troubleshoot the hard drive by checking the cables and scanning for errors.
This disk checked out fine.
I identified the failure and subsequent error was due to corrupted files.
I watched the consolidation process and was able to see which file it was trying to copy before it errored out.
I deleted the corrupted file and restarted the process (I repeated this numerous times).
When the process seemed to be just about over, I got the error "Copying files failed. The required file is in use."
I'm sure this is likely another corrupted file, however, it happens so fast that I have no way to identify what file is causing the problem. I tried making sure no other processes were running and no other windows or media players were open. I also tried to look for an error log but was unsuccessful.
Any ideas?
Disk Utility will scan for a corrupt directory but I don't think it works on the file level if it is a single file that was corrupted. I know I have seen Carbon Copy Cloner pick up on single file error when I had one sitting on a bad sector of a drive several years ago. If you can identify the corrupt file this way then you will have to use a backup copy since it is unlikely it can be rescued.
If you have Diskwarrior it has a file check utility.
You have, of course, restarted your computer before doing all this, and keep other computer activity to a minimum (don't play music while copying the files and don't use other applications that coupld potential be trying to get access to your files)?
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

File sharing - unable to copy photo folder

Hi!
I'm using File Sharing to connect my iMac to my mother's iMac.
I'm trying to copy a folder called "Mom Photos" (sub-folder of the main Pictures folder) to my computer. I created a user name and password on her iMac that I use to login from my iMac. Once logged in, when I click on the "Mom Photos" folder and try to copy and paste it on my computer, I see the following error message: "The items on the Clipboard can't be pasted to this location. One or more of the items may have been deleted or are no longer available."
When I created my user name on her iMac, I set the privileges to "Read and Write."
If I open the "Mom Photos" folder and select all the individual sub-folders within, copy and paste them to a folder on my iMac, I see the following message: "One or more items can't be copied to "Pictures" because you don't have permission to read them, Do you want to copy the items you are allowed to read?"
Thank you for any help!

Not being able to copy the folder itself would suggest that it has some other file, probably hidden, that is stopping the procedure. You could go up one level and perform the same action, but if this next level up is the Pictures folder then it might be best not to do this as the iPhoto library is also included within the Pictures folder.
One possible workaround would be to create yet another folder within the Pictures folder and then copy the "Mom Photos" folder inside this. Then when you do the Apply to Enclosed Items for this new folder, the "Mom's Photos" folder should now be available to copy.
If this still doesn't help then there is a Terminal command called change mode (chmod) that can be used to change the permissions on this folder. This would require to be on your mums iMac and to use her account, as you will need to authenticate to complete the task. It would be best if you can complete the operation without using Terminal but if using the GUI doesn't succeed then Terminal may be your next best option.

6500 Classic Bluetooth Problem - 'error copying fi...

Hi,
I seem to have hit a bit of a problem with my Nokia 6500c and have really been struggling to find a solution.
My desktop PC (Windows XP)has a USB Bluetooth Dongle which was initially used with Microsoft Drivers. Everything worked fine and I was able to transfer files both to and from the 6500c, however, the Microsoft Drivers seemed to only offer limited facilities.
I therefore installed the software / drivers provided with the dongle - Widcomm / Broadcom. Again everything appeared to work fine however, when I 'right click' any file on my PC and select 'send to bluetooth device - Nokia 6500' I receive a message 'error copying file'.
The devices have been succesfully paired and if I browse the phone's files and copy / paste or drag and drop the same file to no errors occur.
Everthing else on the bluetooth connection works without a problem.
Any suggestion would be appreciated.

Hi Yoshi,
Thanks for the reply - the Microsoft drivers / software were fully unistalled before I installed the Widcomm / Broadcom software and drivers. When using the microsoft package the dongle shows as a bluetooth radio device, installs 'darfon' drivers for the bluetooth device and uses generic microsoft drivers for the bluetooth enumerator. The Widcomm / Broadcomm package recognises the dongle as simply a bluetooth device with all facilities operating under broadcom drivers.
I actually think the problem relates to the make of dongle and the 6500c not being fully compatable as I have now tried using the Widcomm software with other phones and a laptop all of which are fine. I have also tried using the phone with other PCs which are not using the microsoft package and all is fine.
The dongle I am using is:-
http://www.ebuyer.com/product/122940

Cannot copy iTunes folder from Windows to Mac because of Permission

I have my iTunes library on a windows machine, running windows 7. The library is organized inside the iTunes folder.
I am trying to put this same iTunes onto my new macbook pro. I tried copying the folder to an external HD and plugging that into my mac. When I tried to just copy the iTunes folder to the Mac HD I got:
I messed around with the permissions in Windows, but I couldn't get it to change. I tried everything I could find in the security tab for the disk and the permissions on the folder.
I decided to try and see if iTunes could just do it itself. So I replaced it itunes library (which was blank) on my Mac with that of my windows. I then opened a song, and followed the promt to locate it. iTunes found all my songs (on the external HD) just as you would expect. Now I tried to consolidate to get everything over to the mac. About halfway through i got this error:
So SOME of the songs and apps and books copied over but only about half and now it won't go any further. I went back to windows and tried to mess with the HD secruities again, but nothing worked.
One more note: when I open the HD on my mac it says "You have read access only" in the security tab. I know every other thread on this like suggests changing that but there is nowhere for me to do that.
Can anyone help me?

I then opened a song, and followed the promt to locate it. iTunes found all my songs (on the external HD) just as you would expect.
That's not what I would expect if you copied the entire /iTunes/ folder to the new computer.
Try this...
Open a Finder window.
Select Users/yourusernname.
Right click - get info.
Scroll to the bottom (Sharing & Permissions).
Make sure you can Read & Write.
Click the gear icon at bottom and select Apply to enclosed items.
Let it finish.
Delete the /Music/iTunes/ folder.
Then copy the entire /iTunes/ folder from the external to /Music/ on the internal.

ITunes library consolidation error: "Copying files failed. An unknown error occurred (-50)."

My iTunes library has outgrown the HDD on my iMac, so I've started to migrate it over to a Synology NAS. The iTunes Media folder is set to the NAS, but when I attempt to consolidate the library the operation fails each time with the error: "Copying files failed. An unknown error occurred (-50).
I have found this references to this error in the communities from Windows users, but I only use Macs.

Just trying to give this topic a poke as I am having a similar issue.
I am rebuilding my library that was on an external drive. I had a backup of much of the files, but not a direct backup of the iTunes media folder, as well I am now moving it to a new iTunes Media directory on a Synology 1813+ NAS running DSM 4.3 vs. a USB attached drive.
I have followed all of the correct procedures to move the media directory by using the tools within iTunes, and that all worked perfectly.
So far iTunes has been able to locate most of the music files through its own processes. Once it completed that process I then initiated "Consolidate files" to move the found files to the new iTunes Media directory on the new NAS.
I am led to believe that the issue is with a specific file that causes the copy process to stop, but I don't know how to capture what file it might be.
I am not seeing anything relevent in the console log.
Hoping someone can throw me some ideas...
iTunes 11.1.2 (32) - iMac 2.8GHz Intel Core 2 Duo 4GB RAM - OS X 10.8.5

Error creating Production Orders in UNCONSTR version

I am copying prodcution orders from version 000 to unconstr version through Report I am getting following error.
Error creating Production Orders in UNCONSTR version and Message no. ZSXXPAPO140.
when I am executed in background it is giving following error.
PPM FG100203.01_19_FR04_P for product FG100203.01 is not valid at the required explosion date 14.01.2010 /SAPAPO/RRP 325 E
Please suggest me any one it is a great help to me.

Hi Venkat,
It seems there is an inconsistent PPM FG100203.01 exists
in your planning version from which you are copying.
Check the possibilities of repairing that PPM and retry
copying. Orelse In the /SAPAPO/VERCOP transaction,
under the product selection criteria, exclude that item and
try copying the version.
Regards
R. Senthil Mareeswaran.

Processchain errors in Production and how to solve those issues

Dear All,
Please share some process chain errors in production and how to solve those errors as well,
Please send me if any one have the list of errors and how you are solved those..
I am very new to BW,am also preparing my list of errors and solutions to fix them..Please share me if any one have ?
Thanks

Hi
Table of Contents
1.     Time stamp error     2
2.      PSA error records     4
3.      SID not found for characteristic     7
4.      Error calling number range object     8
5.      Trfc error     10
6.      ALE REMOTE lock     13
7.      Delta fails     14
8.      Deleting setup table     18
9.      How to run statistical setup for different Application components     19
10. How to do selective deletion     22
11. Roll up     24
11. Compression or collapse     25
12. How to do Attribute change run     27
1.Time stamp error
Resolution procedure
Go to RSA1Source system
Run program RS_TRANSTRU_ACTIVATE_ALL
Mention source system and Info source and then execute.
Now the transfer structure will be automatically activated.
Then proceed with the reload, it will get success now.
2. PSA error records
Go to details tab, we will find its packet no. and its record no.
Resolution procedure
Click on PSA icon in monitor and select the error data packet
Double click on error record and edit it to the correct value,
select save.
Now update from PSA to target by selecting the option Start update immediately.
3. SID not found for characteristic
Resolution procedure
a. Remove the failed request from data target by making its QM status into red.
b. Load Master data for characteristic using full update.
c. Then reload the transactional data.
4. Error calling number range object
Resolution procedure
Note down the assigned dimension into the cube for 0VAL_TYPE
copy the dimension name
Go to RSRV transaction
Tests in Transaction RSRV -> All Elementary Tests ->Transactional Data then double click on Comparison of Number Range of a Dimension and Maximum DIMID- then click on the right pane in same->Mention the cube name and dimension name, click on enter.
Then click on correct error. It will correct the error.
5. Trfc error
Resolution procedure
Go to SM58
Go to edit->Execute LUW.
Then do refresh in monitor.
Now it will pick the records and the load will get success.
Some times we found that some packets will not get updated even if the extraction is showing as complete.
Do manual update of each packet
6. ALE REMOTE lock
Resolution procedure
This can happen when user or ALEREMOTE is accessing the same table
a.     Remove failed request from data target by making its QM status into red.
b.     Check into sm12 and delete the lock, usually the BASIS deletes them
c.     Reload the package
7. Delta fails
Resolution procedure
R/3->BW
Data is coming from R/3 then make the request technical status red in monitor and remove the request from manage.
go to info package restart the load, then you will get a pop up saying that repeat of last delta click on request again.
Go back to manage and look for the delta type, it will show as Repeat of last delta.
BW->BW(Data mart)
Delta load failed from ODS to cube/any data mart.
Make its technical status as red
Go to manage and remove the failed request by making its QM status as red.
It is updating from ODS, so we have to remove the data mart status in ODS manage, before restarting delta
If you click on data mart status it will pop up a window
Click on delete icon, select YES and then ok.
Now refresh manage the data mart status will get deleted.
If you load now the failed delta will get success.

Error copying production folder

Similar Messages

Maybe you are looking for