Error: Could not connect to middleware
Hi All,
I am posting this thread after reading and implementing most of the threads available on this topic.
When I login into the NWA, with MISUPERADMIN user, and I click on Hierarchy Grouping, or Device Maintenance, I get the following error:
Reason: Could not connect to middleware
This is all we have done:
We have installed NetWeaver MI 7.0 with AS ABAP & AS JAVA Components.
After that, we have configured the SLD via Visual Admin Tool.
We have followed this link in detail: http://help.sap.com/saphelp_nw2004s/helpdata/en/43/1d7d843fce3566e10000000a11466f/frameset.htm
So it is not clear, why we are still getting that error.
Kindly provide us with guidance as to which way we should approach to solve the problem.
Thanks & Regards,
Ankur Malhotra
For this error I have found the following as possible reasons. (Assuming all the RFC and JCo are correct)
Both can cause this error.
I have had a 100% success in solving the problem by checking these 2 things.
1: Check your MI_SERVICE and MISUPERADMIN passwords! And that both users are unlocked and in validity period.
Some people say you should use the admin user instead of service (because the admin is a dialog user I think),
but this has never resolved my middleware issues.
2: If you have redeployed the jar file in the deployment tool, you have to restart the j2ee server.
So basically after all the setup steps have been done and checked, you have to bounce the j2ee server.
Similar Messages
-
Mobile Admin Error - Could not connect to middleware
Hi,
We have installed MI 7.0 on a new server of ours. Now I am trying to access Mobile Admin.
I go to the http://<ip>:<port>/nwa link and log in with my user.
Then I get this message I get
-when I click on Heirarchy Grouping: Failed to get hierarchy group elements from middleware. Reason: Could not connect to middleware
-when I click on Device Maintainance: Unable to read data; cannot connect to middleware
and so on for every link in Mobile Admin.
Can you guide me why such problem occurs and how it can be solved?
AnkurHi Ankur,
This is basically a configuration issue. Kindly refer to the following link to the solve the problem [link|http://help.sap.com/saphelp_nw2004s/helpdata/en/43/1d7d843fce3566e10000000a11466f/frameset.htm]. Else refer to the solution in the following [thread|Re: How to upload mobile application in Netweaver 2004s? Donu00B4t appear Mobile;
Best Regards
Sivakumar -
Reg Could not connect to Middleware
Hi All,
I am new to MI,In the WebAS when i clicked on Hierarchy Settings. I got the Error
Could not connect to Middleware and Logon to Middleware failed.
What are the Necessary settings needs to do for this.
Can anyone help me out reg this.
Thanks & Regards,
Archana.Hi Archana,
Seems to be problem with configuration.
Please check the following configuration go through the link given below.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/1d7d843fce3566e10000000a11466f/frameset.htm
Problem is in SAPJRAFactory_EN or DE please check the properties .
Check for the following entries according to your installation type-:
Standard Installation (Not a Cluster)
Parameters - Value
SAPClient - <Client>, for example, 000
ServerName - <Server Name>, for example, bcemain.wdf.sap.corp
PortNumber - <System Number>, for example. 01
Language - <Language Key>, for example, EN
UserName - <User Name>.use service user with RFC Autorizatn
Password - <User Password>
Installation on a Cluster
Parameters - Value
SAPClient - <Client>, for example, 000
SystemID - <System ID>, for example, BCE
MessageServer - <Message Server>, for example, bcemain.wdf.sap.corp
Language - <Language Key>, for example, EN
UserName - <User Name>. service user with RFC authorization
Password - <User Password>
Restart the engine after making the settings correct.
Regards,
Satyendra -
EAS server error: Could not connect to administration Server
Hi,
I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
"Server Error: Could not connect to administration server".
I tried accessing the same through the web URL and I found "404 error - file or directory not found".
I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
The log retireved from the HyS9eas-sysout.log file is below:
<Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
<Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
BPMUI shared webapp not referenced from EAS#11.1.2.0
Application name: EAS#11.1.2.0
Application source: eas.ear
Server name: EssbaseAdminServices0
Server port: 10080
Server SSL port: 10083
Application context: eas
Registry product type: ESSBASE_PRODUCT
Registry physical web application type: ADMIN_SERVICES_WEB_APP
weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for EAS#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
<Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
>
<Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
<Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 05:12:27 JST 2002,
To: Wed Mar 23 05:12:27 JST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
Kindly help me out in solving this issue.
Thanks in advance.
Regards,
Balaji PHi John,
Sorry for replying late.
I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
When i looked in to the Config tool.log,I got the following messages.
[2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
[2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
java.lang.NullPointerException
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
at java.lang.Thread.run(Thread.java:619)
Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
Appreciates your help.
Thanks & Regards,
Balaji P -
Error " Could not connect to SAP R/3 system"
HI:
We have been having some problems with our portal lately and most recently the error that we get is "Could not Connect to SAP R/3 "
The system landscape settings have not been changed.
Thanks for your responses.
RachelWhen I log into the portal and launch the MSS iviews I get the error ( Could not Connect to SAP R/3).
Similarly when I launch ESS I get the following error:
I see that it is lost connection with our SAP R/3 HR system. And system parameters that are available now
are just SAP BW, SEM and CRM..
So looks like we need to re-establish the connection..(?)
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
System 'pcd:portal_content/wwy.KeyStone/com.nrx.pct.vip.systems.sapr3' alias 'SAP_R3_HumanResources' not found. Please check the system object and the alias..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
Parameter Dump
ApplicationParameter
ClassName com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
CodeLink com.sap.portal.appintegrator.sap.bwc.IAC
DebugMode false
DebugMode.default false
DebugMode.type select[false,true]
ExportParameters Authentication, LogonUser, RequestMethod
ForcedRequestLanguage
IAC PP_MY_Profilematchup
MandatoryParameters System, IAC
NavPathUpdate false
NextLayer IAC/ConnectionLayer
OptionalParameters ApplicationParameter, DebugMode
SSO2Template
System SAP_R3_HumanResources
System.type lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
TopLayer IAC/SSOLayer
UserMappingTemplate login=<MappedUser>&password=<MappedPassword>&~mysapcomusesso2cookie=0
Wizard.MandatoryParameters System, IAC
Wizard.OptionalParameters ApplicationParameter
X509Template
buildTree false
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.WizardURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultIViewWizard
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
MandatoryParameters
System SAP_BW SAP_BW_Q22 SAP_BW_SAND SAP_CRM SAP_CRM_SAND SAP_SEM
Internet Application Component (IAC)
OptionalParameters
Application Parameters
DebugMode No Yes -
ERROR: Could not connect to WhatsApp service. Please try again later.
Hi,
Today there was a connection error with WhatsApp. I needed to send something, so decided to delete and then reinstall the app to try and attempt to fix the connection problem. I am using the iPhone 5C.
Once I redownloaded the app, I opened it and the app asked me for my phone number. I typed it in.
But to my surprise, I got this error:
Could not connect to WhatsApp service. Please try again later.
After several attempts of writing my phone number (100% in the correct format) I had found no luck or success.
Anyone else having this error, or is it just me? Please provide some steps on how to fix this if so!
Thank youThank you for the heads up. It seems like it's working now.
For everyone with this problem please thank AlbertoRuperto and follow these steps:
1. Restart your iPhone.
2. Open WhatsApp.
3. Enter your phone number.
4. Enter verification code (if you're a new member) or just click 'Next' if you're a returning user.
5. Done! All your contacts should be there and your chats (as long as you backed them up).
P.S. This only applies to people who redownloaded and are stuck on phone verification page. -
Help - LCM Utility Error - Could not connect to source - Null
Has anyone successfully used LCM to extract BI+ objects to files under 9.3.1?
I've configured it as per the doc, and it seems to connect to HSS Ok, but fails to connect to BI+ even though I've used the Project name and App ID as shown in Shared Services.
Attempting to load Log Config File:../conf/log.xml
main 2009-01-16 11:49:11,823 INFO - ----------- Package file info -------
main 2009-01-16 11:49:11,839 INFO - Package File Path = W:\Hyperion\common\utilities\LCM\9.3.1\doc\
Test_ExportPackage.xml
main 2009-01-16 11:49:20,948 INFO - --------Application Details:---------
main 2009-01-16 11:49:20,948 INFO - Application Name: Hyperion System 9 BI+:xxxwebdev.pcdir.int.xxx:6800::1
main 2009-01-16 11:49:20,948 INFO - Application ID: 00000115dc60f0fe-0001-09bc-0a0401e0
main 2009-01-16 11:49:20,948 INFO - Plugin Type: java
main 2009-01-16 11:49:20,948 INFO - CallBackURL: xxxwebdev.pcdir.int.xxx:6800
main 2009-01-16 11:49:20,948 INFO - Product Name: HAVA-9.3.1
main 2009-01-16 11:49:20,948 INFO - Product Code: HAVA
main 2009-01-16 11:49:20,948 INFO - Project Name: Hyperion System 9 BI+
main 2009-01-16 11:49:20,964 INFO - Plugin Class: com.hyperion.expimp.ExportImportManager
main 2009-01-16 11:49:20,964 INFO - ----------------------------------------------
Current date is - Fri Jan 16 11:49:21 GMT 2009
Current date is - Fri Jan 16 11:49:21 GMT 2009
Current date is - Fri Jan 16 11:49:21 GMT 2009
Current date is - Fri Jan 16 11:49:21 GMT 2009
Current date is - Fri Jan 16 11:49:21 GMT 2009
Current date is - Fri Jan 16 11:49:21 GMT 2009
Current date is - Fri Jan 16 11:49:21 GMT 2009
Current date is - Fri Jan 16 11:49:21 GMT 2009
Current date is - Fri Jan 16 11:49:21 GMT 2009
java.lang.ClassNotFoundException: com.hyperion.expimp.ExportImportManager
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.hyperion.lcm.common.manager.ManagerFactory.getManager(Unknown Source)
at com.hyperion.lcm.handler.util.Migration.getManager(Unknown Source)
at com.hyperion.lcm.handler.ArtifactHandler.execute(Unknown Source)
at com.hyperion.lcm.handler.TaskHandler.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Thread-6 2009-01-16 11:49:21,339 ERROR - Could not connect to Source - null
Thread-6 2009-01-16 11:49:21,401 WARN - Task 1 in package file does not have a valid source manager
Thread-6 2009-01-16 11:49:21,401 ERROR - There are errors in task 1
Thread-6 2009-01-16 11:49:21,495 INFO - Migration(s) Completed Successfully.
the Package Definition is...
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XMLSPY v5 rel. 4 U (http://www.xmlspy.com) by Dongling Ding (Hyperion) --><Package name="" description="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Credentials user="admin" password="{CSS}gEyoY7EyW6cugoKczYohhQ=="/>
<Connections>
<ConnectionInfo name="MyHSS"
type="HSS"
description="Hyperion Shared Service connection"
url="http://xxxwebdev:58080/interop"
/>
<ConnectionInfo name="FS"
type="FileSystem"
description="File System Location"
filePath="file:/c:/LCM/ExportedOutput"
/>
<ConnectionInfo name="BI"
type="Application"
product="HAVA"
description="BI Plus Dev"
HSSConnection="MyHSS"
project="Hyperion System 9 BI+"
application="Hyperion System 9 BI+:xxxwebdev.pcdir.int.xxx:6800::1"
/>
</Connections>
<Tasks>
<Task seqID="1">
<Source connection="BI">
<!-- the options listed would match some option specified in product registration -->
<Options>
<!-- Set to "true" if Job Outputs should be exported alone with the job -->
<optionInfo name="exportJobOutput" value="true"/>
</Options>
<!-- Following demonstrates retrieving the objects using the filtering by type -->
<Artifact parentPath="/Repository Objects" type="folder" recursive="true" pattern="*"/>
<Artifact parentPath="/Repository Objects" type="application/x-brioquery" recursive="true" pattern="*"/>
<Artifact parentPath="/Repository Objects" type="application/x-SQR" recursive="true" pattern="*"/>
<Artifact parentPath="/Repository Objects" type="application/hyperion-analyzer-report" recursive="true" pattern="*"/>
<Artifact parentPath="/Repository Objects" type="application/hyperion-reports-report" recursive="true" pattern="*"/>
<!-- Non-repository objects -->
<Artifact parentPath="/Product Preferences" recursive="true" pattern="*"/>
<Artifact parentPath="/Schedule Objects" recursive="true" pattern="*"/>
<Artifact parentPath="/Physical Resources" recursive="true" pattern="*"/>
<Artifact parentPath="/Security" recursive="true" pattern="*"/>
</Source>
<Target connection="FS">
<Options>
</Options>
<Transforms>
</Transforms>
</Target>
</Task>
</Tasks>
</Package>
Any advice would be great.
Dave.
Edited by: djhogg on 16-Jan-2009 04:22Soban,
I was with the same problem and it worked using LCMUtility in BIPlus\bin directory.
Thanks !
Raphael
Edited by: user4506039 on 11/05/2009 11:10 -
PHP Soap error Could Not connect to host
Hi all, this is my first time on this forum so I hope I am not doing anything stupid.
I have a wsdl file in my local server, when I try to access the code I get error could not connect to the host each time. I thought this was my programming mistake until I tested it on my ubuntu and windows server, It seems to be working fine on them. Is there something that I should enable some module or port ( I already have my soap extension loaded in php). Please help me out with this.
Last edited by rohankoid (2012-04-16 05:05:22)Hi,
Welcome to the Discussions
At one time Google(Talk) only offered the service to Google Mail accounts with either @gmail.com or @googlemail.com endings.
Nowadays they also offer Google IDs that can then be made to work as GoogleTalk IDs.
These are the iChat 3 instructions http://www.google.com/support/talk/bin/answer.py?answer=24076 with pics.
In iChat 3 there was no GoogleTalk option and was added as Jabber ID and then you had to change the Server name (it presumed that it was either gmail.com as Defcom shows or googlemail.com) by taking the end of your Google Mail ID and puling it though to the Server Name box.
In iChat 4 and 5 there is a Google ID option and this will set the Server as talk.google.com as you list.
Google allows Port 443 to be used and the gmail.com as server name
My Current Settings
NOTES.
Based on the Google Instructions your Name in iChat must match the ID you see when you login in to the Google Mail page (Or web site).
The Mail App seems to cope with either and grab your mail for download but iChat prefers that you use the one as Listed.
Also on your Google Account have you enabled TALK ?
You need to do this first.
8:24 PM Tuesday; March 16, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Tns error could not connect to database but can tnsping and sqlplus
The new install OBIEE 10.1.3.4.1, with two Linux RH/64 Bit servers set up and running, but can't get to 11g database when running reports.
Error: nqsError 17001 Oracle Error Code 12154, message ORA-12154: TNS could not resolve the connect identifier specified at OCI call OCIServerAttach. nQSError 17014 could not connect to Oracle database
Server 1 BI Server
BI server is running.
oc4j is running.
jdk is installed
/setup/user.sh variables and libs set
.bash_profile variables and libs set
oracle client installed with lib32
can tnsping the database from here using SID
can sqplus login to the database from here
changed connection pool offiline and uploaded new .rpd
this script does not work /setup . sa-cli.sh to test client, nothing happens, also unable to connect to BI Server in online mode from Windows client 32bit.
Server 2 Presentation Server
saw server is running
set odbc AnalyticsWeb DSN to point to BI Server 1
Since I can ping and connect with tns, why is presentation server throwing errors?
Thanks for the helpCopy the tnsname.ora file from Oracle Database serve onto the client PC.
Path: %Oracle_home%\net80\admin\
Send me a mail if there is any other issues
Regards
Oluseyi Funmi Oduberu
Oracle Consultant
Email:[email protected]
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, Mary -
Calc Manager Error "Could Not Connect To Dimension Server"
Could not connect to Dimension Server.
Please make sure that the required services are started.
https://ServerName:19443/HyperionPlanning/servlet/HspAppManagerServlet:
Connection refused: connect.
Hyperion Planning - 11.1.2.3
can anyone help me.
Thanks,Hi ,
Please look at the support document from Oracle.
Calculation Manager Error "Could Not Connect To Dimension Server" (Doc ID 1634959.1)
Thanks,
~KKT~ -
Error Could not connect to the database - ora-12545: tns:name lookup failure
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, MaryCopy the tnsname.ora file from Oracle Database serve onto the client PC.
Path: %Oracle_home%\net80\admin\
Send me a mail if there is any other issues
Regards
Oluseyi Funmi Oduberu
Oracle Consultant
Email:[email protected]
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, Mary -
EAS - Error: "Could not connect Administration Server
hello All,
i am very new to EPM
i have installed EPM 11.1.2.2 with web application deployed to single manage server
OS : windows server 2008
database : sql server
when i try to connect EAS console it gives me error
Could not connect Administration Server
any idea?If it has been deployed to a single managed server on the default port then you will need to add the server in EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/ -
Error "could not connect....0xE8000001 UGH!
Hey gang. Please help.
Advanced user here, been reading posts and all Mac Docs for a week straight now. Here is my specific issue
I can reinstall iTunes and connect to iPod touch just fine. I can unplug ipod a few times, reconnect and iTunes still recognizes it.
As soon as I eject for the 3rd or 4th time OR restart iTunes, I get the message that it could not connect because of an unkown error 0xE8000001.
Then I have to reinstall itunes again. it works for 3 or 4 cycles, then bam, same error comes back.
So I can fix the error and connect, but how can I get rid of it for good? I have done every suggestion and proceedure from Apple written on this site:
1. reinstall itunes
2. restart apple device service
3. clean up install files
4. repair registry
5. delete temp files folder
6. tried every mother board USB 2.0 ports
7. disabled all "start up services" with msconfig
8. Restored ipod twice
9. plus all other printed help here discussed over the past 4 months.
Nothing works ALL the time. I can just get it to resync 3 times then it comes back????
Thanks!
ZCopy the tnsname.ora file from Oracle Database serve onto the client PC.
Path: %Oracle_home%\net80\admin\
Send me a mail if there is any other issues
Regards
Oluseyi Funmi Oduberu
Oracle Consultant
Email:[email protected]
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, Mary -
Network error could not connect to server 127.0.0.1:5900
I have created a virtual machine in VM manager from a template and when I try to view the console I get the error "network error could not connect to server 127.0.0.1:5900"
The way that I have everything set up is this.... I am using Oracle VirtualBox installed on Windows 7 and I have created a virtual machine in VirtualBox with Oracle Virtual Server installed and I have Oracle VM Manager installed on that same virtual machine. After reading some forums I found out that I needed to install TightVNC to be able to use the console from Windows IE. So, I have installed TightVNC on my OVS but I can not even tell if it is running. I have also made sure that in iptables that port 5900 is open. I have confirmed this by using nmap to scan my ports and port 5900 is open for vnc when my virtual machine in vm manager is running. I just can not figure out why I am getting the network error unless TighVNC is not running on my OVS. Does anyone have any ideas for why this might be happeneing. ThanksHi,
it seemed when you registered the OVM server to the OVM manager, it did not deliver the correct hostname, but the local address instead.
See if your /etc/hosts contains the hostname in the 127.0.0.1 line.
Correct the /etc/hosts, remove the OVS server and reregister with OVM manager.
Regards
Sebastian -
EAS Error: Could not connect to Administration Server
Hi Genius,
I have installed and configured Hyperion (11.1.2.1) Essbase & Planning successfully on windows server 2008 64 bit. For that I installed Oracle 10g Standard Edition as supported RDBMS. Due to RAM consumption I planned to install the Oracle Express Edition instead of Standard Edition. For that I export the tablespace which contains metadata of Hyperion products from existing database(SE) to current database(XE). After that I reconfigured all the Hyperion Products.
Once re-configuration completed, I tried to log-in to the Administration Server via EAS Console by providing server name as localhost and username as Admin. Then EAS console throwing error as "Could not connect to Administration server".
To solve this issue I tried following steps,
1> Remove the Cwallet.sso and create a new Cwallet.sso by using orapki bat file.
2> Backup the original ESSBASE.SEC file and rename the ESSBASE.BAK file to ESSBASE.SEC then I started the Essbase Administration service.
3> I re-installed and re-configured the EAS console.
After following these steps I am not able to overcome this issue.
For your kind information,
1> I can able to login to the Essbase through ESSCMD.
2> I can able to view the list of essbase applications through Smart View.
Kindly guide me how to overcome this issue.
Best Regards
SCHi John,
Thanks for your response. I observed the EAS logs clearly and came to know that there were no errors in Hypeas-syserr.log.
The warnings listed below are mentioned in Hypeas-sysout.log,
Dec 11, 2013 6:18:46 AM PST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.><Dec 11, 2013 6:20:56 AM PST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Dec 11, 2013 6:20:56 AM PST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
<Dec 11, 2013 6:21:01 AM PST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Dec 11, 2013 6:21:26 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Dec 11, 2013 6:21:26 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Dec 11, 2013 6:21:50 AM PST> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Dec 11, 2013 6:21:50 AM PST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Dec 11, 2013 6:21:50 AM PST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Dec 11, 2013 6:21:51 AM PST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4 Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 12:12:27 PST 2002,
To: Tue Mar 22 13:12:27 PDT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4] Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#< ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:ac10:538:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:40e8:3a49:3d4b:1fd1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 172.16.5.56:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:40e8:3a49:3d4b:1fd1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 172.16.5.56:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:10180 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:ac10:538:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Dec 11, 2013 6:21:51 AM PST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices1" for domain "EPMSystem" running in Production Mode>
<Dec 11, 2013 6:21:51 AM PST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Dec 11, 2013 6:21:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 11, 2013 6:21:56 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Best Regards
SC
Maybe you are looking for
-
How do I match the printed pdf page breaks with the page breaks from the online form?
The online form is setup to be 4-5 separate pages...each page going to a different person/group when it is printed in a pdf. However, when the form is printed, it prints out all the blanks and the forms are off by about a half page. Is there any way
-
Menu Bar Icons Appear...then Disappear, then Reappear
I can't find this problem anywhere else on the internet being addressed. I have a MacBook Pro 2Ghz Intel Core Duo. Ever since I did a clean install of Leopard I have this weird problem. In the upper right corner where the Finder, Battery, Volume, Wir
-
RHEL 6.3 : firefox 13.0.5 won't start
Previously I was successfully running Firefox 13.0.5 ( 32-bit version) on the 64-bit Red Hat Enterprise Linux v6.2. I need to use a 32-bit Firefox because I need to use a 32-bit eclipse.exe and various other 32-bit tools on this 64-bit environment. T
-
Need to find a BAPI for the below requirement
Hi All, Need to find a BAPI for the below requirement. We are assigning roles to users using SU01 T-Code and we are in the process of automating this and since we need a BAPI which can do this. Apart from assigning roles to users, SU01 T-code is doin
-
They look fine digital, but when sent to professional printer, it doesn't translate.