Error - Could not determine recipients for message type ACP JMM

Hi Guru's
I am facing a problem while doing goods receipt(migo), "Could not determine recipients for message type ACPJMM".
Right answer will be rewarded
Regards

hi
If you want to deactivate this goto SM30, enter the table TRWCA, deactivate the component
RWEX - Idoc Output, External Accounting.
this should solve your problem.
refer following links
Message type ACPJMM
Message no. B1003""Could not determine recipients for message type ACPJMM""
MIGO and MIRO Problum
regards
kunal
Edited by: kunal ingale on Sep 2, 2008 11:46 AM

Similar Messages

Error in ALE service 29 Could not determine recipients for message type MAT

Hi Experts,
While transferring the material using ALE am getting error 29 ie 'Error in ALE service' and message is 'Could not determine recipients for message type MATFET'.
Also i ve recieved the materials with the proper status al the end am getting the above error.
Kindly help me out.
Thanks in advance.

Hi ,
Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly in WE20 in sender system.
Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
Regards
Vikas Chaudhary

Error In MIGO "Could not determine recipients for message type ACPJMM"

Dear all,
At the time of transaction Goods Receipt(MIGO), I am getting the error message "Could not determine recipients for message type ACPJMM".
System Diagnosis is as below
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
I have check the ALE Settings in we20 and we21
and have assigned the following message types under Logical syste Partner Type
Outbound
ACPJMM
MATMAS
MBGMCR
RSINFO
RSSEND
WHSORD
Inbound
ACPJMM
DEBMAS
FTDABA
FTDACO
FTDACU
INSPECTIONPLAN_CREATE
MATMAS
MBGMCR
RSRQST
WHSCON
I have also created and Assigned a Logical System to the client and have also created a RFC with the same name
I have checked all settings is SALE and they are Fine.
This is a single system
Please help this is really ugrent
Regards
Suhail John

Hi,
Goto table TRWCA (T Code SE30) and deselect all the checked entries.
This should solve your problem.
Regards,
Priyadarshi

Could not determine recipients for message type HRMD_B

Hi,
I am getting below Error in SRM when transferring Org Structure data from HCM system to SRM system in a Idoc. I am using Message type HRMD_ABA and not HRMD_B. I didn't maintain Distribution model for HRMD_B. But in my IDOC status I am seeing below error message for Message type HRMD_ABA Inbound to SRM.
Only I am seeing HRMD_B message type in transactions WE81 and WE82.
Any idea? I appreciate your help.
Could not determine recipients for message type HRMD_B
Message no. B1003
Diagnosis
An IDoc of message type HRMD_B was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Thanks,
Shears

Hi Shears
Did you find soulution to your issue ??
thanks
Anup

Message no. B1003""Could not determine recipients for message type ACPJMM""

Hi All,
While posting GR in MIGO, an error is showing. I am attaching the error description.
""Could not determine recipients for message type ACPJMM""
Message no. B1003
Diagnosis
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Yesterday it was not coming and GR was getting posted.. I was doing configurations for CIN and day before yesterday everything was done,all the registers were getting updated. For that I did many customisation in SPRO. I did settings in tax ion goods monement. and in Material master to assign screen sequence for foreign trade data screen. Is any customozation triggerring IDoc? Earlier also this came, that time we got client copy, but the problem is recurring. Its very urgent as we are going to transport SPRO settings to production.
Solutions will be rewarded.
regards
B Shar
Edited by: Ian Wong on Jul 4, 2008 4:48 PM

Hi
If you are not working with ALE & this message comes, then somone has mistakenly activated ALE linkages for IDoc Output in Accounting.
if you want to keep this active & go forward, you need to complete the Distribution model customizng in BD64.
Thanks & Regards
Kishore

Could not determine recipients for message type ACPJMM

Dear Experts,
while i am trying PGI getting error message " Could not determine recipients for message type ACPJMM'
Kindly let me know wt is the reason and where i should changes for getting clear?
Thanks in advance
ishikesh

Hi Ishikesh,
If you want to deactivate this goto SM30, enter the table TRWCA, deactivate the component
RWEX - Idoc Output, External Accounting.
this should solve your problem.
refer following links
[Message type ACPJMM;
[Message no. B1003""Could not determine recipients for message type ACPJMM"";
[MIGO and MIRO Problum;
Regards,
Karthik

Could not determine recipients for message type ACLPAY

Dear friends,
I am getting error while doing Invoice Verification as "Could not determine recipients for message type ACLPAY"
Please advice how to resolve this issue.
Thanks

Hi
This is IDOC settings for message type ACLPAY there is no receipient please check transaction code WE20 and please get in touch with your technical team
Thanks & Regards
Phaneendra

Could not determine recipients for message type BUPA_INBOUND_MAIN_SAVE_M

We are upgrading CRM from 4.0 to 7.0
While synchronizing a business partner from CRM to ECC, the IDOC control Data section shows no information on the "Receiver Information" Section.It also provides error as "Could not determine recipients for message type BUPA_INBOUND_MAIN_SAVE_M" with error No 29, Outbound Error in ALE.
The Message Type (BUPA_INBOUND_MAIN_SAVE_M) and the Basic Type (BUPA_INBOUND_MAIN_SAVE_M03) was not used in the CRM 4.0 and not sure the reason it apprears now in the IDOC.
The relevant BDOC is not created/shown in transaction SMW01.
We have verified WE20,21, BD64 in ECC
Any advice is greatly appreciated.
Regards
Dhina

Hi,
Please check below note if it helpful to you in resolving the issue.
Note 1447734 - Enhancement of message type BUPA_INBOUND_MAIN_SAVE_M
Thanks,
George

Error could not determine video format

Hi,
I am trying to get my media working via plex but I get a message on my apple tv and my mac saying error could not determine video format.
OI am really puzzled by the fact that one day ago all worked fine! I haven't (as far as I am aware) made any changes to my system so I was wondering if anyone had this message before and knows what to do or try!
Many thanks

Hi Sriram,
Thanks for responding!
I have checked this in BD64 and couldn't found any distribution model for this message type HRMD_B.
I checked by filtering the display with this message type and found nothing.
I have the detailed description of the error message which is pasted below:
""Could not determine recipients for message type HRMD_B
Message no. B1003
Diagnosis
An IDoc of message type HRMD_B was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.""
Appreciate your help!
Thanks and regards,
Gurdip

Error ERR-7621 Could not determine workspace for application (:) on.....

I have developed an online test at apex.oracle.com, after the candidate logged in and took one question and submitted, the following error was displayed in the screen:
Error ERR-7621 Could not determine workspace for application (:) on
application accept.
Expecting p_company or wwv_flow_company cookie to contain security group
id of application owner
I am not sure, what is the cause of this error. Can someone help me to resolve this?

Hi Suzi,
Have you got the fix for this error ?
I have an application in 3.2, and when migrated to Apex 4.0 I get this error. The page has Anychart xml's. When I debug using firebug console, I see the AJAX processes executing successfully. I can clearly see the Headers / Post & Response from the AJAX call. But when I view the XML I see the below error:
XML Parsing Error: not well-formed Location: moz-nullprincipal:{53b4be08-1c99-4d82-8936-a906246d86ad} Line Number 1, Column 6:
<?XML VERSION = "1.0" ENCODING="UTF-8" STANDALONE = "YES"?>
-----^I also see the not well formed XML message, and on clicking the URL I get the below error
<table summary=""><tr><td><img src="/i/error.gif" border="0" /></td><td>Error</td><td>ERR-7620 Could not determine workspace for application ().</td></tr><tr><td></td><td></td><td>Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.</td></tr><tr><td></td><td></td><td></td></tr><tr><td><a href="javascript:window.history.go(-1)">OK</a></td><td><br /></td></tr></table><script type="text/javascript">

</script>Not sure if this error is due to the corrupt XML or something related to Authentication. The Production application (which is in 3.2) has an SSO authentication. Currently, we are in the process of migrating to 4.0 and our SSO has not been configured yet. I have turned off the Authentication for now part of my testing in our Dev (which is 4.0).
I made sure the Anychart libraries are setup similar to how we have in production, and they are using the same set of Anychart JS.
Can someone please help ?
Thanks!
Chandu

Error ERR-7620 Could not determine workspace for application ().

Hi,
I am getting this message on oracle application express 4.0.2.
[Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application ().
OK
Can anyone please tell me how to solve this error.
Hoping a positive response.
Ranjeet.

Getting this message while doing what?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Error ERR-7620 Could not determine workspace for application (1).

I am getting the following error message when using javascript with popup:
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application (1).
OK
Code : URL : javascript:popUp2('f?p=&APP_ID.:16:&SESSION.:::16:P16_DBI_TYPE,P16_STATUS,P16_DBI_MANDATOR:SYBASE,NotScheduled,#LABEL#')

Hello,
You should upgrade all the way up to 2.0
Carl

Error ERR-7621 Could not determine workspace for application (:) on applica

Hello!,
We have a simple template based report in apex, it has 2 tabs, each displays a very small, static table
(about 30 records, 3 columns each). There is 1 user accessing apex, who is logged into the db server
that has the apex app. We've tried several browsers, all same have behaviour as outlined below;
When selecting either tab, we frequently get this error;
"Error ERR-7621 Could not determine workspace for application (:) on application accept
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
OK."
The user clicks "OK" and it takes them back to the tab they were viewing but not the one they selected
OR sometimes it displays the wonderful, "Page Cannot Be Displayed" etc.. Refreshing browser either
then displays the error message (above) or stays with "Page Cannot Be Displayed".
The environment:
Application Express 3.0.1.00.08 using PL/SQL gateway
Oracle db 11.1.0.6
Windows 2003 SP2
Browsers IE(6,7,8), Chrome, FF
Additionally APEX is very, very slow whether it errors or not and in any browser.
Any ideas where to start troubleshooting? Thanks in advance, Donald

Hi,
Did you resolve the issue?
Regards

Error ERR-7620 Could not determine workspace for application (38935).

Hello,
I have an APEX application that has been fairly thoroughly tested on my local machine... I have now deployed onto the apex hosting service as I need to link to it from my website. However, one of the links in a report on the application has stopped working. I receive the following error:
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application (38935).
I've tried this on firefox and internet explorer, and I get the same error. The schema at the apex site is differently named compared to my local development environment, but otherwise I think the installations are identical.
The application is at
http://apex.oracle.com/pls/otn/f?p=38935
Username is john.smith, password is danny1. Once you are logged in, click on either of the links in the 'Recent Proposals' region.
All help gratefully received!
Many thanks,
Danny Layne

Danny,
I don't know why you get that message, probably when the engine is trying to redirect to an error page. I see that your login page has a number of after-submit processes that depend on :P101_USERNAME. These are placed after the clear process which would clear P101_USERNAME, so that's one problem. The other problem is that when you authenticate to your application as a different username from the username you use to authenticate to the development environment (the Builder, etc.), you may get a different session ID for the application that you are testing (using the Run links) as distinguished from the session you have in the Builder. This is explained in more detail here: Re: ERR-1002 on login after switching authentication to LDAP (2.2) The best place to put after-authentication logic is in the authentication scheme's post-authentication process. Just edit the authentication scheme and put your process code in there (or call a stored procedure). This process is guaranteed to run in the same session as that allocated to the user just authenticated.
The final problem to mention with putting processes on the login page (after the login process) is that they continue to run even after the "login" process redirects to the after-login page. Even if everything runs in the same session, there is no guarantee that the after-login page and its on-load events will be executed after the after-login processes on the login page.
Scott

Button/Branch Routing Error:ERR-7621 Could not determine workspace for app

We are getting an error for one of our applications that is only occurring in Production and we are unable to reproduce in any of our other environments.
When the user clicks a button on one specific page (Save, Back, Add) the user is getting the following error:
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7621 Could not determine workspace for application (:) on application accept.
The Back button is the one that doesn't make sense why it is not working as it is a simple redirect to the previous page.
Version: Application Express 2.2.1.00.04
Please help as this issue is affecting our customer from processing orders. I have looked for this error previously, but none seem related to Buttons/Branches. Let me know if you need anymore information.
Thank you,
Amy

Amy,
I imported the same file into the workspace that I used to import into production.
Perfect.
Do you need me to take an export from production directly and reimport?
No but if you could email me that file, I might be able to spot something. I can't find anything wrong with what I see so far. Send to [email protected], to my attention, please.
Also, if you would change your OTN user profile and handle to include your first name, that would help us.
Scott

Error - Could not determine recipients for message type ACP JMM

Similar Messages

Maybe you are looking for