Error: Could not find DI API version 8.8 PL17 or higher.

Hello,
I'm trying to install the integration component to SAP B1 8.8 PL 14, and halfway through it's giving me the following error,
"Could not find DI API version 8.8 PL 17 or higher"
I was wondering, how do I find the Patch Level 17 for the DI API?
PS. I tried doing what it says in the installation guide, but it didn't help update me to the required version --> "To install the latest di api version, in the select components window of the sap b1 di api installshield wizard, deselect the di api previous versions checkbox"

Thanks Eddy,
I installed patch level SAP B1 PL18, and was able to get the version of DI API they were requesting. Now, when I'm in step 3/5 of the event sender, I get the following error when I click "test connection":
"Servlet B1iXcellerator is not available"
how do I go about correcting this?

Similar Messages

Eclipse give following error :could not find Java 2 runtime environment

When I try to start eclipse it is giving me following error could not find Java 2 runtime environment.It was working fine untill I installed a new verson of eclipse although I am not whethar that is the source of problem.
When i give java -version command in command prompt it shows
Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
has value '1.4', but '1.6' is required.
Error: could not find java.dll
Error: could not find Java 2 Runtime Environment.
My java Home ,classpath , and path are all set as I say it was earliar woking fine.
Please Help.

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

[ERROR] could not find source for resource bundle modules.

We are in the process of upgrading our flex application from SDK3.6 to SDK4.5.0.17899.
Flexmojos version used for compilation is 3.9.
The flex library project is complied with SDK4.5.0 version but BUILD is not getting SUCESS from maven.
The following is the reason is showing and unable to find out the root cause.
[ERROR] could not find source for resource bundle modules.
Can you please help me out.
Thanks,

Copying
/Software/FB\ Eclipse\ Plugin/Adobe\ Flex\ Builder\ 3\ Plug-in/sdks/2.0.1/frameworks/locale/en_US/charts_rb.swc into
the 3.5 SDK directory
/usr/local/lib/flex_sdk/3.5.0/frameworks/locale/en_US
solves the problem.
Not sure why as the charts_rb.swc comes from Flex 2.0

Policytool give me error Could not find Policy File ....\.java.pol

hi master
error Could not find Policy File: C:\Documents and Settings\Administrator\.java.policy
Sir when I open policytool the system give me this error
And I use http://www.jensign.com/JavaScience/www/keystorereader/index.html this link
For Keystore, Policy and Security File Reader
that give me this message
------ Default Policy File and Keystore Status ------
java.home C:\PROGRA~1\Java\JRE15~1.0_1
C:\PROGRA~1\Java\JRE15~1.0_1\lib\security found.
user.home C:\Documents and Settings\Administrator
C:\Documents and Settings\Administrator\.java.policy NOT found.
C:\Documents and Settings\Administrator\.keystore NOT found.
How set user home and keystor please give me idea
thank
aamir

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

Error: Could not find compiled resource bundle 'components' for locale 'en_US'

We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4. Most of the conversion appears to be working fine, with one exception. When I launch the Flex4 version, all my data interchanges with the server works. Just as it is about to show the UI, the following error occurs:
     Error: Could not find compiled resource bundle 'components' for locale 'en_US'
I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed. If I look in
     ~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
I see a lot of swc files, and of course no 'components.swc'. I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason. I think this is mostly from our in-house UI library. The properties for that library (and for my main app I am testing now) have:
     - Use default SDK (currently "Flex 4.0")
     - Use Flex 3 compability mode
     - Use minimum version (Flash Player) required by the Flex SDK
     - Enable strict type checking
     - Enable warnings
I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior. This project is built by the following script:
ruby scripts/concat_properties.rb -o resources.properties ^
     src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
     src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
     src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
     ../../scout/common/src/locale/fr_common/mypals/resources.properties
mxmlc -locale=fr_FR -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
     bin-debug\bundles\mypals
What have I missed???

You have two posts. I will try to answer each completely. Second one first. You say I should change my build to include the framework resources. I am afraid I am not sure which and what to do there. We combine all our properties file into one large one, then use the following build line:
mxmlc -locale=fr_FR,en_US -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add? The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files. I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change. I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
====================
For your first message, I did a search for 'spark' in the entire project. It only existed on 3 lines, each at the start of css files:
    @namespace s "library://ns.adobe.com/flex/spark";
I had put those in based on reading needed changes to naming in CSS. Since I was not actually using any spark ('s') components yet, I removed these lines. The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
I did a search for "s:" throughout the project. That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object"). No reference to any s: object. (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
Note that when I first reported this problem, the compiler was set to ONLY support fr_FR. In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for. We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc. Each language is a separate node on our server, so there is no need to mix & match at runtime)
The console shows a lot of swf loads that I do not understand...
The console output shows (my comments after ==> indicator)
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
             ==> our locale is set here, after the above load and before the next line
Look for name file at: ./data/fr_fr/names.csv
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
Loaded 2278 names.       ==> indicates successful load of data retrieved from server
Loaded 154 bad words     ==> our second data set has been retrieved and loaded
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
    ==> not sure what this next warning means. I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
Resource bundle loaded for locale fr_fr ==> at this point, we appear to have our French assets loaded successfully
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
[Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
==> everything looks fine up to here. This is then when the third call to installCompiledResourceBundles occurs
Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()
    at mx.core::FlexModuleFactory/docFrameHandler()
    at mx.core::FlexModuleFactory/docFrameListener()

Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17: Error: Could not find a match for std::_Tuple_impl 0, unsigned&& ::_Tuple_impl(std::tuple unsigned&& , unsigned) needed in std::tuple unsigned&& ::tuple unsigned, void (unsigned&&).

I think I downloaded the latest Solaris Studio version. When I compile my code, I got the following error:
bash-3.00$ gmake -f Makefile.sun
CC -c -o metadata.o metadata.cpp -I. -I.. -g -O0 -std=c++11 -I/export/home/oracle/zhifan/boost_1_55_0 -I/export/home/oracle/zhifan/instantclient_11_2/sdk/include -V
CC: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
ccfe: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
"metadata.cpp", line 20: Warning: db hides databus::MetadataManager::db.
"metadata.cpp", line 26: Warning: db hides databus::MetadataManager::db.
Error: Could not find a match for std::_Tuple_impl<0, unsigned&&>::_Tuple_impl(std::tuple<unsigned&&>, unsigned) needed in std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&)".
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<unsigned>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
1 Error(s) and 2 Warning(s) detected.
gmake: *** [metadata.o] Error 2
with the same code, It can be compiled with g++ on Linux platform.
1 Is the issue same as 12.4 Beta, Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&> ?
2 Do we have any workaround for this issue?
3 When will the final 12.4 release be available?

I can't say for sure whether your problem is fixed in the final release without a test case, but I'd say the chances are very good.
The final release will be announced soon. Watch this space, or the Oracle Solaris Studio page for an announcement.

Error "Could not find a capable video driver. Update display drivers." in Pr CS6

Please help! I can't open my Pr CS6 - keep on getting error "Could not find a capable video driver. Update display drivers." How do I fix this?

Display driver http://forums.adobe.com/message/4943624 may help
For the future, please list this information when asking a question
Information FAQ http://forums.adobe.com/message/4200840
You need to post the EXACT brand and model of your graphics card, and the device driver number
If you have nVidia...
How to determine your nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10

I'm getting an error "Could not find compiled resource bundle 'layout' for locale 'en_US'."

I thought I would update to the latest trunk version of the sdk. When I run my code I keep getting this Error being thrown:
"Error: Could not find compiled resource bundle 'layout' for locale 'en_US'."
It worked fine with the beta sdk and nightly builds from a long time before that. The error occured in builds 7573 and 7830, so what ever changed happened before then. I put a break point in there, and other resource bundles are being loaded ok.
My project uses RSLs and modules. I'm using Flash Builder beta.
I'm not familiar with resource bundles and not sure what to look for. Any ideas as to what to try or where to look?
Is there something I need to update to run the latest code?
Is the the appropriate place to post questions regarding the nightly builds? Or should I be asking somewhere else?
Thanks!
PS Here is the full stack trace if it gives anyone more ideas:
Error: Could not find compiled resource bundle 'layout' for locale 'en_US'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\trunk\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:339]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\trunk\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:268]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()
    at mx.core::FlexModuleFactory/docFrameHandler()
    at flash.display::MovieClip/nextFrame()
    at mx.core::FlexModuleFactory/deferredNextFrame()
    at mx.core::FlexModuleFactory/update()
    at mx.core::FlexModuleFactory/moduleCompleteHandler()

hi
also add the following
to my compiler auguments:
-locale en_US    -source-path=locale/{locale}    -allow-source-path-overlap=true
and to actionScriptProperties I have the following where path= is the location of your locale folder
<compilerSourcePathEntry kind="1" linkType="1" path="/locale/{locale}"/>
Not sure if this is the correct way to do it, but it stopped me getting any errors.

MakeOTF Error: could not find FontName in FontDict

I am trying to convert a symbol font I constructed and have been using in PostScript programs to OpenType. I have included a cut-down version (only two characters) in this message.
When I try to convert the (cut-down) font with MakeOTF I get the message:
[makeotf] Error: could not find FontName in FontDict of file GPSymbolcut.pfa.
Can you tell me what the error message indicates here, please? I feel that the FontName is included!
This is the file GPSymbolcut.pfa:
%!PS-Adobe-2.0
%%Title: GPSymbol Font
%%CreationDate: Thu Feb 14 10:59:25 2008
%%EndComments
/setpacking where{/cpack currentpacking def
pop true setpacking}if
/bd{bind def}bind def
/bp{bind put}bd
/xd{exch def}bd
/dc{/bits xd
/name xd
/num xd
num 256 lt{Encoding num name put}if
CharStrings name bits put}bd
/fsd 15 dict def fsd begin
/FontType 3 def
/FontMatrix [0.001 0 0 0.001 0 0] def
/FontBBox [-55 -55 1000 786] def
/FontName /GPSymbol def
/PaintType 0 def
% /UniqueID 0 def
/FontInfo 10 dict dup begin
/OutlineResolution 1000 def
/Notice () def
/FullName (GPSymbol) def
/FamilyName (GPSymbol) def
/Weight (Regular) def
/version (0.0) def
/ItalicAngle 0 def
/isFixedPitch false def
/UnderlinePosition 0 def
/UnderlineThickness 0 def
end def
/Encoding 256 array def
0 1 255 { Encoding exch /.notdef put } for
Encoding
dup (W) 0 get /sunsymbol put
(z) 0 get /crossbox put
/Metrics 50 dict def
Metrics begin
/.notdef 0 def
/crossbox 833 def
/sunsymbol 833 def
end
/BBox 50 dict def
BBox begin
/.notdef [0 0 0 0] def
/crossbox [60 0 760 700] def
/sunsymbol [60 0 760 700] def
end
/CharacterDefs 50 dict def
CharacterDefs begin
/.notdef {} def
/crossbox
{ newpath
60 setlinewidth
90 30 moveto 90 670 lineto
730 670 lineto 730 30 lineto
closepath stroke
90 30 moveto 730 670 lineto stroke
90 670 moveto 730 30 lineto
stroke } def
/sunsymbol
{ 30 setlinewidth
newpath 350 350 200 0 180 arc 350 350 200 180 0 arc closepath stroke
newpath 350 654 50 0 180 arc 350 654 50 180 0 arc closepath fill
newpath 502 613 50 0 180 arc 502 613 50 180 0 arc closepath fill
newpath 613 502 50 0 180 arc 613 502 50 180 0 arc closepath fill
newpath 654 350 50 0 180 arc 654 350 50 180 0 arc closepath fill
newpath 613 198 50 0 180 arc 613 198 50 180 0 arc closepath fill
newpath 502 87 50 0 180 arc 502 87 50 180 0 arc closepath fill
newpath 350 50 50 0 180 arc 350 50 50 180 0 arc closepath fill
newpath 198 87 50 0 180 arc 198 87 50 180 0 arc closepath fill
newpath 87 198 50 0 180 arc 87 198 50 180 0 arc closepath fill
newpath 50 350 50 0 180 arc 50 350 50 180 0 arc closepath fill
newpath 87 502 50 0 180 arc 87 502 50 180 0 arc closepath fill
newpath 198 613 50 0 180 arc 198 613 50 180 0 arc closepath fill
} def
end
/BuildChar
{ 0 begin
/char exch def
/fontdict exch def
/charname fontdict /Encoding get char get def
fontdict begin
Metrics charname get 0
BBox charname get aload pop
setcachedevice
CharacterDefs charname get exec
end
end
} def
/BuildChar load 0 3 dict put
end
/GPSymbol fsd definefont pop
/setpacking where{pop cpack setpacking}if

Hi John;
The FontDict is correctly constructed. The problem is that this is a Type 3 PostScript font, where the glyph outlines are described by regular Postscript drawing operators, like Adobe Illustrator graphics, rather than by Type 1 binary operators. MakeOTF only supports glyph outline data in the Type 1 or CFF formats. In order to use makeotf with yourfont, you will need to convert it to Type 1.
If you have Adobe Illustrator sources for the glyph outlines, then you can get these into FontLab, and then use FontLab to make Type 1 font. If you are good at scripting, you could also edit this text representation into the representation created by the FDK 'detype1' program, and then use the 'type1' program to compile this into a Type 1 font. To see the text format used by 'type', just run the 'detype1' program on any Type 1 font file. You can use the 'tx' program to extract a Type 1 font from any OTF or TTF font.
An example of how you can use the FDK command-line tools for this kind of operation:.
# Extract a Type 1 font file from an OTF font
tx -t1 <source OTF font file name> <new Type 1 font file name>
# Convert Type 1 font to a human-editable text representation
detype1 <Type1 font file name> <new text file name>
#do manual edits on the <new text file name>
#compile text file back into a Type 1 font
type1 <old text file name> < new Type1 font file name>
#convert Type 1 font to CFF
tx -cff <Type1 font file name> < new CFF font file name>
#Finally, stick the new CFF font data back into the original OTF font
sfntedit -a "CFF"=< CFF font file name> <source OTF font file name>
Note that the last works only if you did not change glyph order, as many OTF tables references glyphs by glyph ID.
- Read Roberts

U401 touch windows 8 audio driver unable to install error could not find divice for this driver

u401 touch windows 8 audio driver unable to 0wau05w8.exe install error could not find device for this driver
kindly advise

hi karthi2lenovo,
Welcome to the Forums.
If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
1. Open Device Manager (press Winkey+R > type devmgmt.msc)
2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
3. As an alternative, try this conexant driver from station-drivers:
Conexant High Definition Smart Audio
Version 8.64.59.52 (Win8)
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Error: Could not find compiled resource bundle 'SharedResources' for locale 'en_US'

I'm trying to launch my flex app then i got this error:
Error: Could not find compiled resource bundle 'SharedResources' for locale 'en_US'.
Does anyone know what the problem could be?
Ps: I'm using flex4 under FlashBuilder 4.5
Thanks
David

There isn't new doc, because the workflow didn't change. It works pretty
much the same as Flex3. There is no s:Module or s:ModuleLoader so you
continue to use the mx versions as you did before.
The styles mechanism did change so that each module has its own styles and
now is sensitive to a common mistake in setting up modules projects. Folks
accidentally reference the module class directly from within the main
application instead of using a shared interface. Doing so actually links in
the module and its dependencies into the main app, defeating the main point
of modules, but in Flex 4, that configuration also throws errors.
Another change in Flex 4 is that the main app must load singletons shared by
modules. That is the result of optimizing startup a bit by not linking in
every manager you might possibly need. This means that if your app doesn't
use popups and your modules do, you must link the PopUpManager into the mai
app by doing:
Import mx.managers.PopUpManager; PopUpManager;
It is also possible that there is a bug. Simplify your scenario and file a
bug or post the test case if the simple case also fails. Maybe you've got
some other configuration we didn't anticipate.

Error:could not find Java 2 Runtime Environment

Greetings,i have a java problem with a game(football manager 2008) installation.I have a hp laptop with windows vista installed and when the installation is on 100%.It appears Error:could not find Java 2 Runtime Environment.I have taken some screenshots to help you understand my problem.
intallation:
http://img218.imageshack.us/img218/7945/egkatastashba2.jpg
the error:
http://img232.imageshack.us/img232/6388/errorty5.jpg
Also i tried to join a site which java is required and it appeard the following errors:
http://img87.imageshack.us/img87/6465/sfalmasp6.jpg
http://img87.imageshack.us/img87/9337/sfalma2sj1.jpg
PS:I have installed the java(Java(TM)6 Update 5).I hope to receive a reply with the solution of the problem as soon as possible.Thank you
Edited by: Cap.George on Mar 7, 2008 8:46 AM
Edited by: Cap.George on Mar 7, 2008 8:47 AM

Consider going to a Windows forum
(or better yet, to Microsoft's web site or to a local book store)
and learning about Vista's "User Account Control".
At least do a Google search on it.

Idoc Error: Could not find code page for receiving system

hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty

SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .

I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams

Error: Could not find DI API version 8.8 PL17 or higher.

Similar Messages

Maybe you are looking for