Error: Could not find message in archive

Hi All,
I have set up archiving for xml messages in XI.
The jobs run fine and it archives messages into a file.
when i select the file using "<b>Archived XML Messages</b>" option in sxmb_moni, it shows me all the messages in the archive file but when i click on "Display Archived Versions", I'm unable to see the payload.
I get an error message "Could not find message in archive"
Please help!!
Regards,
Sidharth

Hi All,
Thanx for your support. I have resloved the issue myself. The archive object BC_XMB was not activated, and i activated it. Now I'm able to view the archived messages successfully.
Regards,
Sidharth

Similar Messages

SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .

I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams

Policytool give me error Could not find Policy File ....\.java.pol

hi master
error Could not find Policy File: C:\Documents and Settings\Administrator\.java.policy
Sir when I open policytool the system give me this error
And I use http://www.jensign.com/JavaScience/www/keystorereader/index.html this link
For Keystore, Policy and Security File Reader
that give me this message
------ Default Policy File and Keystore Status ------
java.home C:\PROGRA~1\Java\JRE15~1.0_1
C:\PROGRA~1\Java\JRE15~1.0_1\lib\security found.
user.home C:\Documents and Settings\Administrator
C:\Documents and Settings\Administrator\.java.policy NOT found.
C:\Documents and Settings\Administrator\.keystore NOT found.
How set user home and keystor please give me idea
thank
aamir

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

Error: Could not find compiled resource bundle 'components' for locale 'en_US'

We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4. Most of the conversion appears to be working fine, with one exception. When I launch the Flex4 version, all my data interchanges with the server works. Just as it is about to show the UI, the following error occurs:
     Error: Could not find compiled resource bundle 'components' for locale 'en_US'
I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed. If I look in
     ~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
I see a lot of swc files, and of course no 'components.swc'. I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason. I think this is mostly from our in-house UI library. The properties for that library (and for my main app I am testing now) have:
     - Use default SDK (currently "Flex 4.0")
     - Use Flex 3 compability mode
     - Use minimum version (Flash Player) required by the Flex SDK
     - Enable strict type checking
     - Enable warnings
I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior. This project is built by the following script:
ruby scripts/concat_properties.rb -o resources.properties ^
     src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
     src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
     src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
     ../../scout/common/src/locale/fr_common/mypals/resources.properties
mxmlc -locale=fr_FR -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
     bin-debug\bundles\mypals
What have I missed???

You have two posts. I will try to answer each completely. Second one first. You say I should change my build to include the framework resources. I am afraid I am not sure which and what to do there. We combine all our properties file into one large one, then use the following build line:
mxmlc -locale=fr_FR,en_US -source-path=. ^
     -compatibility-version=3.0.0. ^
     -static-rsls=true ^
     -include-resource-bundles=resources ^
     -output src/main/resources/bundles/mypals/fr_fr_resources.swf
I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add? The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files. I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change. I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
====================
For your first message, I did a search for 'spark' in the entire project. It only existed on 3 lines, each at the start of css files:
    @namespace s "library://ns.adobe.com/flex/spark";
I had put those in based on reading needed changes to naming in CSS. Since I was not actually using any spark ('s') components yet, I removed these lines. The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
I did a search for "s:" throughout the project. That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object"). No reference to any s: object. (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
Note that when I first reported this problem, the compiler was set to ONLY support fr_FR. In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for. We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc. Each language is a separate node on our server, so there is no need to mix & match at runtime)
The console shows a lot of swf loads that I do not understand...
The console output shows (my comments after ==> indicator)
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
             ==> our locale is set here, after the above load and before the next line
Look for name file at: ./data/fr_fr/names.csv
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
Loaded 2278 names.       ==> indicates successful load of data retrieved from server
Loaded 154 bad words     ==> our second data set has been retrieved and loaded
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
    ==> not sure what this next warning means. I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
Resource bundle loaded for locale fr_fr ==> at this point, we appear to have our French assets loaded successfully
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
[Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
==> everything looks fine up to here. This is then when the third call to installCompiledResourceBundles occurs
Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
    at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
    at mx.core::FlexModuleFactory/installCompiledResourceBundles()
    at mx.core::FlexModuleFactory/docFrameHandler()
    at mx.core::FlexModuleFactory/docFrameListener()

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key.

Dear Expert,
I setup SharePoint for 3 tiers, WFE, APP + DB Server.
I installed SQL 2014 reporting service Add-in on APP Server and already enable sql reporting service in DB Server. DB Server can do report server.
I follow the step : https://msdn.microsoft.com/en-us/library/jj219068(v=sql.120).aspx but I stuck in no.2, I cannot start the services, in picture below.
I checked the SSRS provision is disabled not online
Please help.

Hi MasterBird,
According to your description, when you register and start the Reporting Services SharePoint Service, the error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\120 registry key is thrown out.
As this
article say, if you use three-computer deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the third computer
hosts an instance of the Database Engine.
Regarding the error message, it could cause by the Reporting Services – SharePoint feature and Reporting Services Add-in for SharePoint Products haven’t been installed. Please refer to articles:
SSRS SharePoint 2013 Create Service Application error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key Error
Installing SSRS 2012 in SharePoint Mode on SP2010
If issue persists, please check the error detailed information in ULS logs, and check Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log to see if any error occurred during set up. For more information, please refer to this article:
Troubleshoot a Reporting Services Installation.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Reportings Services in a 2-Tier Architecture / (Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key. )

Hello,
we want to install Reporting Services in a 2-Tier Architecture. The Servers are the following:
SERVER1: Windows Server 2012 and SQL Server 2012
SERVER2: SharePoint 2013 (WFE)
Reporting Server is installed on SERVER1 and running. On SERVER2 the registration of the service through Powershell was done but it does not start. An Error when starting the Service on the server occurs with the message:
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key."
I have found the following in msdn stating that a minimal of the same SharePoint Installation must exist on the Reporting Server. The article is for SQL Server 2008 R2 and SharePoint 2010. Is this the case also for SQL Server 2012 and SharePoint 2013 and
the root of the problem? http://msdn.microsoft.com/en-us/library/bb510781%28v=sql.105%29.aspx
If so does this mean that I require for the installation another License?!?!
Thank you in advance!

Hi,
According to your post, my understanding is that you wanted to install Reporting Services in a 2-Tier Architecture.
As the article
say, if you use Two-Computer Deployment, the first computer hosts an instance of a SharePoint product. The Reporting Services Add-in is installed on this computer. The second computer hosts SQL Server Reporting Services and the Database Engine.
The steps to install in a two-tier environment are very similar to a standalone environment hence you can go to refer to the ' Install Reporting Services SharePoint Mode for SharePoint 2013' article at http://msdn.microsoft.com/en-us/library/jj219068(v=sql.110).aspx
To install in a two-tier environment, you can refer to:
How to setup, configure and test
SQL 2012 SP1 SSRS with SharePoint 2013 SP1
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error "Could not find a capable video driver. Update display drivers." in Pr CS6

Please help! I can't open my Pr CS6 - keep on getting error "Could not find a capable video driver. Update display drivers." How do I fix this?

Display driver http://forums.adobe.com/message/4943624 may help
For the future, please list this information when asking a question
Information FAQ http://forums.adobe.com/message/4200840
You need to post the EXACT brand and model of your graphics card, and the device driver number
If you have nVidia...
How to determine your nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10

MakeOTF Error: could not find FontName in FontDict

I am trying to convert a symbol font I constructed and have been using in PostScript programs to OpenType. I have included a cut-down version (only two characters) in this message.
When I try to convert the (cut-down) font with MakeOTF I get the message:
[makeotf] Error: could not find FontName in FontDict of file GPSymbolcut.pfa.
Can you tell me what the error message indicates here, please? I feel that the FontName is included!
This is the file GPSymbolcut.pfa:
%!PS-Adobe-2.0
%%Title: GPSymbol Font
%%CreationDate: Thu Feb 14 10:59:25 2008
%%EndComments
/setpacking where{/cpack currentpacking def
pop true setpacking}if
/bd{bind def}bind def
/bp{bind put}bd
/xd{exch def}bd
/dc{/bits xd
/name xd
/num xd
num 256 lt{Encoding num name put}if
CharStrings name bits put}bd
/fsd 15 dict def fsd begin
/FontType 3 def
/FontMatrix [0.001 0 0 0.001 0 0] def
/FontBBox [-55 -55 1000 786] def
/FontName /GPSymbol def
/PaintType 0 def
% /UniqueID 0 def
/FontInfo 10 dict dup begin
/OutlineResolution 1000 def
/Notice () def
/FullName (GPSymbol) def
/FamilyName (GPSymbol) def
/Weight (Regular) def
/version (0.0) def
/ItalicAngle 0 def
/isFixedPitch false def
/UnderlinePosition 0 def
/UnderlineThickness 0 def
end def
/Encoding 256 array def
0 1 255 { Encoding exch /.notdef put } for
Encoding
dup (W) 0 get /sunsymbol put
(z) 0 get /crossbox put
/Metrics 50 dict def
Metrics begin
/.notdef 0 def
/crossbox 833 def
/sunsymbol 833 def
end
/BBox 50 dict def
BBox begin
/.notdef [0 0 0 0] def
/crossbox [60 0 760 700] def
/sunsymbol [60 0 760 700] def
end
/CharacterDefs 50 dict def
CharacterDefs begin
/.notdef {} def
/crossbox
{ newpath
60 setlinewidth
90 30 moveto 90 670 lineto
730 670 lineto 730 30 lineto
closepath stroke
90 30 moveto 730 670 lineto stroke
90 670 moveto 730 30 lineto
stroke } def
/sunsymbol
{ 30 setlinewidth
newpath 350 350 200 0 180 arc 350 350 200 180 0 arc closepath stroke
newpath 350 654 50 0 180 arc 350 654 50 180 0 arc closepath fill
newpath 502 613 50 0 180 arc 502 613 50 180 0 arc closepath fill
newpath 613 502 50 0 180 arc 613 502 50 180 0 arc closepath fill
newpath 654 350 50 0 180 arc 654 350 50 180 0 arc closepath fill
newpath 613 198 50 0 180 arc 613 198 50 180 0 arc closepath fill
newpath 502 87 50 0 180 arc 502 87 50 180 0 arc closepath fill
newpath 350 50 50 0 180 arc 350 50 50 180 0 arc closepath fill
newpath 198 87 50 0 180 arc 198 87 50 180 0 arc closepath fill
newpath 87 198 50 0 180 arc 87 198 50 180 0 arc closepath fill
newpath 50 350 50 0 180 arc 50 350 50 180 0 arc closepath fill
newpath 87 502 50 0 180 arc 87 502 50 180 0 arc closepath fill
newpath 198 613 50 0 180 arc 198 613 50 180 0 arc closepath fill
} def
end
/BuildChar
{ 0 begin
/char exch def
/fontdict exch def
/charname fontdict /Encoding get char get def
fontdict begin
Metrics charname get 0
BBox charname get aload pop
setcachedevice
CharacterDefs charname get exec
end
end
} def
/BuildChar load 0 3 dict put
end
/GPSymbol fsd definefont pop
/setpacking where{pop cpack setpacking}if

Hi John;
The FontDict is correctly constructed. The problem is that this is a Type 3 PostScript font, where the glyph outlines are described by regular Postscript drawing operators, like Adobe Illustrator graphics, rather than by Type 1 binary operators. MakeOTF only supports glyph outline data in the Type 1 or CFF formats. In order to use makeotf with yourfont, you will need to convert it to Type 1.
If you have Adobe Illustrator sources for the glyph outlines, then you can get these into FontLab, and then use FontLab to make Type 1 font. If you are good at scripting, you could also edit this text representation into the representation created by the FDK 'detype1' program, and then use the 'type1' program to compile this into a Type 1 font. To see the text format used by 'type', just run the 'detype1' program on any Type 1 font file. You can use the 'tx' program to extract a Type 1 font from any OTF or TTF font.
An example of how you can use the FDK command-line tools for this kind of operation:.
# Extract a Type 1 font file from an OTF font
tx -t1 <source OTF font file name> <new Type 1 font file name>
# Convert Type 1 font to a human-editable text representation
detype1 <Type1 font file name> <new text file name>
#do manual edits on the <new text file name>
#compile text file back into a Type 1 font
type1 <old text file name> < new Type1 font file name>
#convert Type 1 font to CFF
tx -cff <Type1 font file name> < new CFF font file name>
#Finally, stick the new CFF font data back into the original OTF font
sfntedit -a "CFF"=< CFF font file name> <source OTF font file name>
Note that the last works only if you did not change glyph order, as many OTF tables references glyphs by glyph ID.
- Read Roberts

Error could not find file/pathurl for id file::QTMRead

Hi,
I'm very puzzled as to this error I have gotten on multiple projects when trying to check back out.
Error could not find file/pathurl for id file::QTMRead
I'm halfway through a project with a deadline of next week, and have been using edit proxies, so am just worried about being able to export the final project if the Server cannot find the file.
It seems to get this error after a glitchy upload where the server locks up and I have to force quit. Has anyone had this message before/have any ideas how to solve it?
Some speedy help would be very much appreciated.
Thanks,
Dania

You need to make sure that you imported the Reports.xml file into the FDM application. Also, you will want to login to the application using the workbench client and click on the Reports tab and expand the English > Check Reports and right-click on the check report and choose "Set as Validation Report".

Error: Could not find compiled resource bundle 'logging' for locale 'fr_FR'

Hello
I'm developping a mobile application based on Flex 4.6 + Adobe AIR 3.5
There is no error when compiling, but when the application starts it crashes whith this error message:
Error: Could not find compiled resource bundle 'logging' for locale 'fr_FR'.
at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.y\frameworks\p rojects\framework\src\mx\resources\ResourceManagerImpl.as:392]
at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.y\frameworks\ projects\framework\src\mx\resources\ResourceManagerImpl.as:306]
at mx.resources::ResourceManagerImpl/processInfo()[E:\dev\4.y\frameworks\projects\framework\ src\mx\resources\ResourceManagerImpl.as:450]
at mx.resources::ResourceManagerImpl()[E:\dev\4.y\frameworks\projects\framework\src\mx\resou rces\ResourceManagerImpl.as:133]
at mx.resources::ResourceManager$/getInstance()[E:\dev\4.y\frameworks\projects\framework\src \mx\resources\ResourceManager.as:117]
at mx.styles::StyleManagerImpl()[E:\dev\4.y\frameworks\projects\framework\src\mx\styles\Styl eManagerImpl.as:380]
at _ASMagnetoFute_iOS_FlexInit$/init()
at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::kickOff()[E:\dev\4.y\frameworks\projects\framework\src\mx\managers\SystemManager.as:2815]
at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::preloader_completeHandler()[E:\dev\4.y\frameworks\projects\framework\src\mx\managers\SystemManager.as:2723]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler()[E:\dev\4.y\frameworks\projects\framework\src\mx\p reloaders\Preloader.as:542]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
The application is in french, both for iOS and Android.
It is split in several libs, an application for iOS and another one for android.
I use the same SDK for another mobile application without any problem -but it does not use the mx.logging package.
I tried many things, like the solution described in http://forums.adobe.com/thread/758619, but it did not solve the problem. After listing the bundles used I added
-include-resource-bundles=MagnetoFute,collections,components,core,effects,fiber,layout,log ging,messaging,rpc,serializer,skins,sparkEffects,styles,textLayout,utils,validators
to my compiler arguments.
Help would be greatly appreciated.

I don't know if Adobe has an fr_FR locale for the logging bundle. You can try creating your own to see if that is the only one missing or if there is a whole resource swc missing.

Error: "Could not find the main class: Files\NetBeans"

I am working on a WorldWind mapping application but I think this issue is more of a straight Java question. I was attempting to add a web service reference by means of the NetBeans IDE. The reference compiled as it should have but then the application would not run. I deleted the reference, commented out all the code that used the web reference, basically restored all the code to how it was before trying to add the web service. The applicaiton still will not run with the message that it can't find the main class. I do, however, get a clean build. What should I do to fix this?
Here is the error: "Could not find the main class: Files\NetBeans"
thanks!

nigel25840 wrote:
I am working on a WorldWind mapping application but I think this issue is more of a straight Java question. I was attempting to add a web service reference by means of the NetBeans IDE. The reference compiled as it should have but then the application would not run. I deleted the reference, commented out all the code that used the web reference, basically restored all the code to how it was before trying to add the web service. The applicaiton still will not run with the message that it can't find the main class. I do, however, get a clean build. What should I do to fix this?
Here is the error: "Could not find the main class: Files\NetBeans"
thanks!Sounds like something (a .cmd file or .bat file, perhaps) is set up to launch NetBeans with a command line like this:
java -classpath ... c:\Program Files\NetBeans ...
So since the path has embedded space(s) in it, it thinks you are wanting to run a class named "Files\NetBeans", which does not exist.
You need someone there who knows what they are doing to look into it for you.

Eclipse give following error :could not find Java 2 runtime environment

When I try to start eclipse it is giving me following error could not find Java 2 runtime environment.It was working fine untill I installed a new verson of eclipse although I am not whethar that is the source of problem.
When i give java -version command in command prompt it shows
Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
has value '1.4', but '1.6' is required.
Error: could not find java.dll
Error: could not find Java 2 Runtime Environment.
My java Home ,classpath , and path are all set as I say it was earliar woking fine.
Please Help.

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Error:could not find Java 2 Runtime Environment

Greetings,i have a java problem with a game(football manager 2008) installation.I have a hp laptop with windows vista installed and when the installation is on 100%.It appears Error:could not find Java 2 Runtime Environment.I have taken some screenshots to help you understand my problem.
intallation:
http://img218.imageshack.us/img218/7945/egkatastashba2.jpg
the error:
http://img232.imageshack.us/img232/6388/errorty5.jpg
Also i tried to join a site which java is required and it appeard the following errors:
http://img87.imageshack.us/img87/6465/sfalmasp6.jpg
http://img87.imageshack.us/img87/9337/sfalma2sj1.jpg
PS:I have installed the java(Java(TM)6 Update 5).I hope to receive a reply with the solution of the problem as soon as possible.Thank you
Edited by: Cap.George on Mar 7, 2008 8:46 AM
Edited by: Cap.George on Mar 7, 2008 8:47 AM

Consider going to a Windows forum
(or better yet, to Microsoft's web site or to a local book store)
and learning about Vista's "User Account Control".
At least do a Google search on it.

Error: Could not find message in archive

Similar Messages

Maybe you are looking for