Error "Could Not intialize" with IE8 and System Monitoring in DSWP

Dear All,
Having upgraded to IE8, I am getting "Could Not Initialize" error when executing System Monitoring through TCode DSWP in Solution_Manager.Please kindly assist.
Thank you.
Regards,
John

Hello John,
IE8 requires SAPGUI 720, so you may want to ensure yor SAPGUI ersion is at this level.
Regards,
Paul

Similar Messages

I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
let me know if this helps you..

Deploy Web Site Error:Could not load file or assembly 'System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies

I have created a ASP.NET web Site (not Web application), using Visual Studio 2012 Ultimate and "SQL Server Compact 4.0 Local Database" in my C# Code.
I am able to successfully compile & publish the website to another IIS Web Server, with Operating System Windows Server 2008 R2 Standard. I can even test, successfully, this website on the machine I developed it in.
I am publishing the website, from within Visual Studio, to a Network web server running IIS. To Publish I am using Build-> "Publish Web Site". In the Publish Profile, I am using Web Deploy Method. Even though I am using, successfully,
"SQL Server Compact 4.0 Local Database" in my website, the "settings" (in Publish Profile) does not detect any Databases in the project. Which may not be a problem.
When I try to bring up the web site on the IIS Web Server machine I get the following error..
Could not load file or assembly 'System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies .
As my project is a Web Site, not Web Site Application, I do not have a references node in the Solution Explorer. I think the System.Data.SqlServerCe.dll, which is type GAC in my project, is not getting published to the webserver, which is causing this Error.
Can I copy this .dll over manually ? If yes, where to put on the ISS Web Server ? I do not see any bin folder.
Any help to resolve this error will be appreciated.
diana4

Hello.. I went ahead and created web application project and have gone past that error. But I have a new error now
System.Data.SqlServerCe.SqlCeException: Unable to load the native components of
SQL Server Compact corresponding to the ADO.NET provider of version 8876.
Install the correct version of SQL Server Compact. Refer to KB article 974247
for more details.
Compiling and Publishing (Deployment) are both successful
In my project, when adding reference to SQL Server Compact Edition , there are 2 possible locations to reference the DDL from:
C:\Program Files\Microsoft SQL Server Compact Edition\v4.0\Private
C:\Program Files\Microsoft SQL Server Compact Edition\v4.0\Desktop.
I have tried both. I get the same error as shown above.
Interestingly, in My WebConfig, I do not see any reference to System.Data.SqlServerCe.
Yet, the Website works when I click on Ctrl+F5
diana4

Installation Error "Could not determine information about file system"

Hi, i get the following error trying to install ABAP central instance on windows server 2003 enterprise edition. I am trying to do a local installation.
Anybody have any ideas what i am doing wrong?
INFO 2007-05-13 23:50:40
Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-05-13 23:50:40
Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2007-05-13 23:50:40
Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\q0w9e9r8t7.1.xml.
INFO 2007-05-13 23:50:41
Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
INFO 2007-05-13 23:50:41
Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
INFO 2007-05-13 23:50:41
Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\keydb.1.xml.
INFO 2007-05-13 23:50:41
Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\change.log.
INFO 2007-05-13 23:50:42
Output of change user /install is written to the logfile change.log.
WARNING 2007-05-13 23:50:42
Execution of the command "change user /install" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
INFO 2007-05-13 23:50:42
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ENTERPRISE\Administrator' on host '.'.
INFO 2007-05-13 23:50:42
Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\summary.html.
PHASE 2007-05-13 23:50:42
Prepare the installation program.
INFO 2007-05-13 23:50:49
Installation start: Sunday, 13 May 2007, 23:50:39; installation directory: C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI; product to be installed: SAP NetWeaver '04 SR1> SAP System Installation> ABAP System> Oracle> Unicode> Central Instance Installation
INFO 2007-05-13 23:50:50
Host operation t_HostInfo_SHARED processed successfully.
ERROR 2007-05-13 23:55:28
FSL-02107 Path component contains reserved character (':'): C:
ERROR 2007-05-13 23:55:28
FSL-02106 Path contains reserved character (':'):
C:
SAP
ERROR 2007-05-13 23:55:28
MOS-01236 Could not determine information about file system enterprise:, mounted at unknown.
WARNING 2007-05-13 23:55:28
The step GetMountInfo with step key SAPSYSTEM_CI|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo was executed with status ERROR.

Hi.. Philip...
During installation when it prompts / gives us to type / Browse the installtion sources like installation master / ker cd's / installation export .......,
What did you do ?
did you browse to the respective directory ??
or
did you manually type ??
I got the same problem on unix like. On oversight instead of browsing i typed manually and by mistake in one of the path i added space in one of the installation source path and installation ended with not able to locate file system error.
if you have typed it manually .. i beleive it could be similar to this ??
Update your reply
Rgds
PR

New fingerprint software is not working with IE8 and FF3

I have downloaded the latest version but it still does not resolve the issues with IE8 and FF3...
Please, Please...
Fix the main issue of the software unable to save website login details with Internet Explorer 8+ and Firefox 3+
Thanks
Stewart Grainger

Hello
I am pretty sure they know about this issue and software companies must not hear what the people say. For me it is logic that they watch what happen on the software market and try to adapt own products as soon as possible.
This issue with IE8 is known and soon or later the updated version will be offered on download page but the question is: when?
I cannot understand why they wait so long time. OK, to fix some issue and testing procedure can take a days but IE8 is not on the market from yesterday.
Lets see how long it will be necessary for AuthenTec to fix this issue.

Flash Player Does Not Work with IE8 and Windows XP

I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?

Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
1)      Update your Windows software
a.       Follow the steps below to view updates that are available for your computer.
                                                   i.      Click to go online to the Windows Update website
1.       Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
                                                 ii.      Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
1.       High Priority
2.       Software, Optional
3.       Hardware, Optional
                                                iii.      Select the updates you want, click Review and install updates, and then click Install Updates.
b.      What do I do if Microsoft Update is not installed?
                                                   i.      Follow the steps below to install Microsoft Update and check for updates.
1.       Click to go online to the Windows Update website
2.       Click the Go button next to the Get Microsoft Update Today and then click Start Now.
3.       Review the license agreement, and then click Continue.
4.       After setup is complete, click Check for Updates.
5.       Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
a.       High Priority
b.      Software, Optional
c.       Hardware, Optional
6.       Select the updates you want, click Review and install updates, and then click Install Updates.
2)      Turn off Internet Explorer add-ons you don't recognize
a.       When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
b.      How do I spot malicious add-ons?
                                                   i.      You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
1.       Blank names.
2.       Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
3.       A publisher name you might not recognize.
c.       How do I disable an add-on?
                                                   i.      Open Internet Explorer.
                                                 ii.      Depending on your version of Internet Explorer, do one of the following:
1.       In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
2.       In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
3.       In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
4.       Follow these steps to determine the version of Internet Explorer you're using:
a.       Open Internet Explorer.
b.      Press ALT+H, and then click About Internet Explorer.
c.       How can I find which version of Internet Explorer I'm using if it won't launch?
                                                                                                                            i.      If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
1.       Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
2.       Right-click iexplore, click Properties, and then click Version.
3.       Under Item name, click File Version. The version number appears under Value to the right of File Version.
a.       Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
d.      If you aren't using the latest version of Internet Explorer, consider updating.
                                                                                                                            i.      How do I update to the latest version of Internet Explorer?
1.       Click to download and install the latest version of Internet Explorer
                                                                                                                          ii.      How can I update Internet Explorer without launching my web browser?
1.       Click to go online to the Windows Update website.
2.       Click Custom to check for available updates.
3.       In the left pane, under Select by Type, click Software, Optional.
4.       Select the Internet Explorer update, and then click Review and install updates.
                                                iii.      Click the name of the add-on.
1.       Click Disable. You might have to restart Internet Explorer for the changes to take effect.
2.       Why do some add-ons include (Not verified) in the Publisher column?
a.       If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
3.       How do I disable an add-on if I can't access Internet Explorer?
a.       Click Start, and then click Control Panel.
b.      Double-click Internet Options.
c.       Click the Programs tab, and then click Manage Add-ons.
d.      Click the name of the add-on you want to disable, and then select Disable.
e.      When the Add-on Status dialog box appears, click OK to close it.
3)      Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
a.       Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
                                                   i.      http://go.microsoft.com/fwlink/?linkid=56726
If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
1)      Disable all add-ons (one at a time) until you can no longer reproduce the problem
a.       Close all Internet Explorer windows.
b.      Click Start, and then click Control Panel.
c.       Click Network and Internet Connections, and then click Internet Options.
d.      Click the Programs tab, and then click Manage Add-ons.
e.      Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
f.        Click OK.
g.       Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
h.      Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site.

SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

Hi,
I am trying to figure out how to fix my problem
Error: Could not be opened. Operating system error code 5(Access is denied.)
Process Description:
Target Database Server Reside on different Server in the Network
SSIS Package runs from a Remote Server
SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
SSIS Package use variables to specified the share location of the files using UNC like this
\\server\files
Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
Below post it has almost the same situation:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

Convert-WindowsImage.ps1 Could not load file or assembly 'System.Linq,..' error

I tried the following:
.\Convert-WindowsImage.ps1
-SourcePath C:\Backups\All\Files\Windows8-ReleasePreview-64bit-English.iso -VHDFormat VHD -SizeBytes 52GB -VHDPath C:\AllSharedC\VPC\Win8.vhd
and got the following error in the log. .Net 4.0 full and WMF 3.0 RC are all installed.
Log
Windows PowerShell transcript start
Start time: 20120601112809
Username : Sys\User
Machine   : Sys (Microsoft Windows NT 6.1.7601 Service Pack 1)
ERROR : Could not load file or assembly 'System.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
INFO   : Log folder is C:\Users\Byron\AppData\Local\Temp\Convert-WindowsImage\942fccac-662a-4b2a-bfa9-6831892cad5c
INFO   : Done.
Windows PowerShell transcript end
End time: 20120601112809
How can I solve this?

Running on Win7 Ultimate with sp1. I'm sure I got all the prerequites installed.
System Requirements
Convert-WindowsImage can only be run on Windows 8 Consumer Preview, Windows 8 Release Preview, Windows Server 8 Beta, and Windows Server 2012 Release Candidate
operating systems.
Sorry man. As per above

ITunes error: Could not write value ManageLLRouting to key \SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Itunes was not installed properly.

I received the following iTunes error after installing itunes as an adminstrater on my computer using a 64 bit and windows 8.1 operating system: If you wish to import or burn CDs, you need to reinstall iTunes.
I tried the installation trouble shooter and received the following error: Could not write Value ManageLLRouting key\system\currentcontrolset\services\BonjourService\Parameters.
How can I fix Could not write Value ManageLL Routing Key error and install iTunes correctly? Must I uninstall Norton 360 degrees Antivirus program before installing iTunes.
I look forward to your tecniical support .
Cheers,
clinton86

Hi clinton86,
Welcome to the Apple Support Communities! I understand that are receiving an alert when trying to import a CD to iTunes and are being asked to reinstall iTunes. iTunes and all of its components must be removed in a specific order when uninstalling from a Windows computer. Please use the following article as a reference.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
I hope this helps,
-Joe

Could not load file or assembly 'System.Data.SqlServerCe, Version=3.5.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies.

I have updraded my pocket pc application from VS 2005 to VS 2008 and had to convert all the sqlce* files to 35 from 30. all upgraded System.Data.SqlServerCe.dll to version 3.5.0.0 and runtime version as v2.0.50727. My Target Framwork is .NET Framework 2.0.
All the other sqlce* files are:
sqlceca35.dll
sqlcecompact35.dll
sqlceer35EN.dll
sqlceme35.dll
sqlceoledb35.dll
sqlceqp35.dll
sqlcese35.dll
The application is compiling without errors with the above dll's and creating its own webservice dll. the webservice dll is the copied to webserver which has the following dll's:
sqlceca30.dll
sqlcecompact30.dll
sqlceer30EN.dll
sqlceme30.dll
sqlceoledb30.dll
sqlceqp30.dll
sqlcese30.dll
and System.Data.SqlServerCe.dll as Assembly version 9.0.242.0 and file version as 3.0.5300.0.
but when i try to run my application using the emulator, i get the following error:
Could not load file or assembly 'System.Data.SqlServerCe, Version=3.5.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from
HRESULT: 0x80131040)
i cannot upgrade the dlls on the webserver as other apps are using the 30 dlls and if i try to use 30 dlls in my application, my application fails to build on System.Data.SqlServerCe.dll with Assembly version 9.0.242.0 and file
version as 3.0.5300.0.
i have spent a few days now trying to resolve this issue and none of the solutions provided on web have helped me so far. the application does not have app.config, but adding the following code to web.config did not help either:
<
runtime>
<
assemblyBinding
xmlns="urn:schemas-microsoft-com:asm.v1">
<
dependentAssembly>
<
assemblyIdentity
name="System.Data.SqlServerCe"
publicKeyToken="89845DCD8080CC91"
culture="neutral"/>
<
bindingRedirect
oldVersion="0.0.0.0-9.0.242.0"
newVersion="3.5.0.0"/>
</
dependentAssembly>
</
assemblyBinding>
</
runtime>
any help will be highly appreciated.

The binary 'System.Data.SqlServerCe, Version=3.5.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' is only to be used for windows desktop projects. For devices the PublicKeyToken is different and you should use the device
binary "System.Data.SqlServerCe, Version=3.5.0.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3" to compile your device project.
Also in addition to what Erik mentioned, please check if you have
Microsoft SQL Server Compact 3.5 for Windows Mobile installed on your machine.
-Tarun Ramsinghani
Please mark this post as answers if it solves your problem.

Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST

Hi ,
I am getting the below error:
Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.eligibilitymodel1.EligibilityModel1. The SSO ticket needed for authentication to WD_MODELDATA_DEST has expired. Close all applications and logon anew!
Regards
Anumit

Anumit,
when will you get this error?
if you are getting this while using adaptive rfc model follow this link Could not create JCOClientConnection for logical System:
if it doesnot work
try to reimport the certificate or restart the server
Thanks
Bala Duvvuri

Could not create JCOClientConnection for logical System: SAP_R3_HumanResour

Hi,
For all the standard ESS (sap.com) the JCo connection used is SAP_R3_HumanResources .
All the applications are working fine.
I am trying to add a test Component in one of the (sap.com~eepro) for testing a standard BAPI call for getting user details.
I have used the same Model and the same SAP_R3_HumanResources destination name.
But i get the following error when i try to execute the standard BAPI_USER_GETDetails (non - HR).The other applications for standard components (Vc ) work when i run the application.
My question here is why a custom , local webdynpro when try to make a RFC call using the running already existing JCO connection throws such error.
How could this be solved.Note the connection is running and working fine for all the ESS webdynpros!!
Error:
Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.test.hr.model.Test. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Your experience would be worthy enough.
Regards,
Swathi

Hi Swathi,
Here are some suggestions to trace down to the actual problem.
1) First check if all users are having this issue. (All other applications working and only one application giving problem)
2) If no, then take list of users having this problem and check their portal and SAP accounts
3) If yes, then concentrate on testing the JCo connections and the user account mapped in JCo settings
Possible things u can check is user's portal account (locked or not), SAP account (lock or validity), pernr mapped (validity), JCo user (check for lock), ping and test JCo connections
If none of them are issue, check the logs if there are any trace for this issue. I believe there must be certainly one. That can help u going further.
Regards,
Harini S

I am unable to download i tunes. After seemingly installing and looking like it was going to run, I got an error message that process could not be completed due to "system has not been modified". Help!

I am unable to download itunes due to an error message that popped up after installing (or so I thought) was completed. It said it could not complete the process because "system has not been modified". What?

OK, can anyone explain how am I supposed to deal with this reply from apple? (I used a report a problem of a song purchase to ask why I can no longer access USA content)
Quote
Dear Darren,
Greetings from iTunes Store Support. My name is Subramani and I am happy to assist you today.
I understand that you are unable to make the purchases from your iTunes store account. I know how important this is for you and I am glad to provide you with the necessary information.
Darren, you are not authorized to obtain content from the United States iTunes Store. We are unable to provide further information regarding this situation. I apologize for any inconvenience this has caused.
For more information on Apple's requirements for using the iTunes Store, please refer to the iTunes Store Terms and Conditions:
http://www.apple.com/legal/itunes/us/terms.html
Thank you for being a valued iTunes Store customer. Have a nice day!
Unquote
Nice day? W-T-F?? They cannot tell me why I can't access USA content with my USA based account?
Anyone?
Thanks
Darren

The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error

We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC)                   0x1BC0 SharePoint Server Search      Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC)                   0x05F4 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588)                   0x1DE4 SharePoint Server Search      Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC)                     0x1060 SharePoint Server Search      HTTP Protocol
Handler         du4i                    0x29E4 SharePoint Server Search      HTTP
Protocol Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x29E4 SharePoint Server Search      HTTP Protocol
Handler         du54 High    CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x130C SharePoint Server Search      Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'.   [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC)                     0x104C SharePoint Server Search      HTTP Protocol
Handler         du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588)                   0x2948 SharePoint Server Search      Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error.   (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvg0 High    STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
en0e High    CSTS3Accessor::InitURLType: Return error to caller, hr=80041200                 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dv3p High    CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb1 High    CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x193C SharePoint Server Search      PHSts
dvb2 High    CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200            [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC)                     0x16FC SharePoint Server Search      HTTP Protocol
Handler         du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC)                   0x1444 SharePoint Server Search      Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil Loka

Hi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
          Ping <servername>
      2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

Error "Could Not intialize" with IE8 and System Monitoring in DSWP

Similar Messages

Maybe you are looking for