Error: Could not join the domain. Unable to reach the domain.

Hi, I'm trying to setup a demo environment. I guess VPN is working fine because i can see traffic. And also DNS. I even tried using a domain administrator account, so there is no problem with the account.
When i first created a app collection the wizard complained about using domain.local so i tried domain.com and it worked. Later i want to change back to domain.local because domain.com is only a domain suffix and not my real domainname.
Any tips and tricks I can check to get this working?

Well... This was embarrassing. A typo in the network config. Problem solved.

Similar Messages

Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.

Hi
I am trying to set up an Azure RemoteApp Hybrid solution.
I have created RemoteApp net and uploaded a custom image and all that is fine.
When I link my template to my Collection it fails after provisioning for about an hour.
I recive the following message: Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.
The join domin works fine and I have tryed with account with different lvl of access to my AD.
Any suggestion how to solve this?

Hello Eric,
I am landing into the same Problem and i read your guidance on this issue. Let me answer it point by point.
1. Check the VPN state to ensure it is active or connected state:
Sundesh:My Azure RemoteApp Virtual Network after successfull S2S configuration shows as Ready. Is that what you mean by Connected State? Earlier to S2S, it was just under connecting state.
2. Verify your VNET configurations have proper IP address ranges
Sundesh: The VNET address range, the Local address range and DNS has already been verified twice. In fact the same address ranges(with exception to VNET) are working fine on a VENT config on Azure VM instance. Verified.
3. Verify your DNS IP configurations are valid, (often this is the problem)
Sundesh: Yes its done and verified
4. Verify the credentials entered for domain join are valid.
Sundesh: Tested these credentials by joining a regular Azure VM to domain and it works there.
5. Make sure your VPN endpoint that Azure RemoteApp service is connecting to is not blocking traffic.
Sundesh: Can you please let us know the specific port numbers that we need to consider and i can have it checked with the Network team
Thanks
SUndesh

I am trying to join my wireless network and I am getting the error "Could not join" A connection timeout occurred.

I am trying to join my wireless network and I am getting the error "Could not join" A connection timeout occurred.
Any suggestions

It is very tough to help you when you don't fill out your profile, this is needed to get an idea of what your system looks like. Please read the Profile Update for instructions. Once you post that info then we have a starting point to begin helping you.

Osdm error 'could not create the Java virtual machine.'

Running on Windows XP. SQL Developer reports Java(TM) Platform=1.5.0_06
I downloaded and unzipped the osdm early adopter release,but when I double click on the osdm.exe, I get a dialog box titled"Java Virtual Machine Launcher" with the error:
could not create the Java virtual machine.
I'm don't know where to begin to troubleshoot this problem.
Is there a log,trace,error file somewhere?
Do I need something specific in my path or an environment variable set?

Thanks Jim, for helping and the support. I'll respond to a few things in this thread for the rest of the forum.
Feedback
Let's start with the feedback and support. As Rene said, he is working at answering all queries coming into the feedback application. This means reviewing the issues, working with the developers and logging bugs. Each comment and query in that application is addressed and users can go back in an review the feedback for their own comments in the application too. We have had considerable interest and downloads, about which we are very excited, and this means there are lots of queries. Rene is addressing all these, and as I type, there are no comments in that application that have not been addressed. Not all are closed, as there are some outstanding issues, but each user who has submitted a comment shold have received at least one email.
The Team
I'm reluctant to comment about which part of the product is built in which country, but will say that SQL Developer has been a small team, with the greater percentage of developers living outside the US from the outset. I love working in the team including the wide diversity of locales and cultures and also think that because we live across multiple time zones, we can help users most times of the day or night. We are very privileged to have had the modeling team join us and I'm sure you'll get to know them in time too. If you are interested, the team stretches across a few states in the US, Ireland, Northern Ireland,England, Belgium, Bulgaria, India and China!
Now to the problem. - Java virtual machine
1. There is a choice of download, either with the JDK or without. If you download the build with the JDK, there should be no problem, as the product knows where to find the jdk. I'm not sure I see which of these 2 downloads was used. So that would be useful information to have.
2. If you use the build without the JDK, then Data Modeling looking for the detail in your path.(Unlike in SQL Developer where we prompt you) You can test to see what is in your path by starting a command line, or command prompt and typing java -version. This will tell you what version of java is being looked for and used by Data Modeling.
If you do not have a JDK, then you can download and install that as described on the download page.
Troubleshooting
We want to release SQL Developer Data Modeling as a standalone tool (i.e. what you are testing today) or underpinned by a repository. So our main goal is to ensure that we have a solid stable and usable product for production. The plan is to follow production with a much tighter integration to the underlying SQL Developer framework.
Regards
Sue

ALI Search error: "Error - Could not contact the Search Service"

Hi,
I have installed Aqualogic Interaction with all its components.
While trying to search for a string, it is throwing this error:
"Error - Could not contact the Search Service".
Unable to figure it out. Is this because of the search host settings?
Where can I check/modify the search host settings? I am not able to find them.
Can someone please help on this?
Thanks in advance,
Ashok

The settings for the search server are located in Administration. Go to the utilities drop down, from here you should see Search Service Manager. Here you should see the contact node host and port.
Make sure the Search Server is running. Also, import the searchcluster.pte file so that the Search Cluster Manager is visible in the utilities drop down.
Kenan
http://www.ppc.com

Crystal Report Viewer Error: Could not render the page

Hi,
I was facing the same issues whereby i creating my crystal report in VS2005 profesional built in crystal report designer. When preview in VS2005 the graph displayed correctly. However, when export to IIS it shows the error could not render the page.
I am using Windows 2008 server, IIS7.
I tried to install the CRREDIST x86.msi into my server, however it still could not show out the graph (pie chart) in the localhost.
Appreciated anyone know this could kindly advice.
thanks.
ck

Hello,
Crystal Reports 10 is not supported on Windows 2008 Server.
Please view the information [here|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Upgrade the Crystal Reports.
Thanks,
Bhushan.

Photoshop CS6 error : Could not complete the video flames to layers command because Dynamiclink is not available

i can´t import videos and mp3 photoshop cs6 error : Could not complete the video flames to layers command because Dynamiclink is not available .... what it means? who can i fix it?

Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978

Photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Error - Could not complete the music store request, the store may be busy .

I get the error "Could not complete the music store request, the store may be busy, check your internet connection or try again later." I have uninstalled and reinstalled,Tried on and off with the firewall, tossed the prefs, tried older and latest versions. It used to work but it hasn't worked in the last few days.
Windows XP Pro

I found the problem to the iTunes Music Store connectivity. When iTunes version 6 is installed, it places a configuration / preferences file in the following location:
"C:\Documents and Settings\<user>\Application Data\Apple Computer\iTunes\iTunes.pref"
This file contains several very large keys:
Preferences:129= (41,826 characters in length)
Music Store= (1,722 Characters in length)
Somewhere in these keys is stored are references to userid's, connections or other TCP/IP / internet connectivity objects that are being used when iTunes is installed. By deleting this file, these old setting appear to be cleared out.
In my case, one or more of the keys in this file appear to have been storing a property from my old dial-up ISP connection that was no longer valid for my new, Comcast cable modem connection.
Once I deleted this file, and re-started iTunes, it was as if I had never run the software before. I bypassed the option for searching for and importing .mp4's from My Music, and Itunes opened correctly, with full access to the music store. My library and playlists were intact and all is well.
Apple should re-write the protion of iTunes codes that stores anything pertaning to an internet connection that may change over time. Alternatively, iTunes should either A) Prompt for this information B) Enable user access to this parameter in a settings dialog C) Access this information dynamically at runtime.
Paul

Error: "Could not complete the requested operation" when you start Illustrator CS2 (Windows XP)

Hi everybody i'm nick from KL Malaysia, i having a problem with my Illustrator CS2 problem can't solved it, someone can help me?
My problem is when i open lllustrator after load finish the file thn will come out Error: "Could not complete the requested operation", i dunno y?
Have someone same problem with me anot? got any stion to solved it?

Nick,
The first thing to try is to
a) Ctrl/Cmd+Alt/Option+Shift during startup,
or (if a) does not work)
b) Move the folder
a) is easy but irreversible, b) is more thorough and reversible, so if you like your settings and do not want to destroy them in vain, use b).

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

Multipass error: Could not purchase "The Daily Show With Jon Stewart"

Multipass error: Could not purchase "The Daily Show With Jon Stewart". An unknown error occurred (5002). There was an error in the iTunes Store. Please try again later.
Happened on 6/18 & 6/19
iTunes 7.6.2.9
Actions taken:
restarted computer
logged out of iTunes
Successfully downloaded single episode on 6/19:"The Daily Show With Jon Stewart 6/9/08"

I don't know what to tell ya, besides:
Plz answer my question!
I can't open itunes, just suddenly! by oreolova
I REALLY need help! I'm desperate!!!!!!!!!!!

Activation Error: Could not complete the iTunes... (help!)

Activation Error: "Could not complete the iTunes Store request. The store may be busy. Check your Internet connection or try again later"
Ok that is the error I get every time I set my new iPhone in the dock.
Details:
I bought the 8GB iPhone at the Kenwood Mall in Cincinnati OH, brought it home installed version 7.3 of iTunes, plugged in the dock and the iPhone, I went through the activation process and after agreeing to all the terms and licenses, the iPhone said "activated," but iTunes was still trying to connect to AT&T for something and eventually timed out. I remove the iPhone and it seems to sync and all features seem to work fine including making and receiving calls. BUT... everytime I place the iPhone in the dock, I get the above error. I click OK and every works fine. This happens everytime I place the iPhone in dock. How do I get rid of it??? Is there still something else that needs to be done on my account. BTW, my Internet is working fine, as I am typing this message via my Internet connection in IE on apple's site.
Thanks
Dell XPS Gen-2 Windows XP Pro 1GB Mem, SP2

I bought the 8GB model, only had a 45 minute wait in line at ATT store. Performed activation via iTunes over 10 hours ago with porting of old T-mobile number. Still receiving message that activation is not completed. Called ATT and after 3 transfers, 35 minute hold times and then a recorded message that "due to extremely high call volumes" we will not be able to answer your call" it then proceeds to disconnect you. Finally kept trying and talked with ATT rep. in portability and they confirmed my porting has been approved but that my account still shows iPhone not registered. They then provided 877-800-3701 for problems with iPhone activation. After speaking with this representative, he would not work with me until I provided Web Order #. I told him that I purchased the phone in person at store, so he said that I would need to contact the store to obtain this number and without this number they could not verify that I had the phone and therefore it couldn't be activated. I called the store and left message. A store rep. called me back and told me that I would need to contact that same 877 number as they could not support me. ***!! To make matters worse, my old phone is now been ported and deactivated so I am phone-less and have a iPhone sitting in the dock that is completely useless. I am very disgusted at this point and don't know what to do. I was not expecting such an awful customer experience with an Apple product. Anyone have any thoughts? I drove by the AT&T store and there is a huge line of buyers, so I am not sure what to do at this point.

Error: Could not join the domain. Unable to reach the domain.

Similar Messages

Maybe you are looking for