Error: Could not read Header Mapping in Receiver Agreement

Dear SAP experts,
Newly installed SAP G7A PI 7.1(Acceptance box) was already released to customer.
We are doing an initial test (BAT phase), wherein, our end-to-end scenario is, from a EP Portal application ---> G7A PI 7.1 --> Trading Partner via AS2 protocol.
G7A PI is connected to Trading Partner via AS2 protocol.
Currently, our EP Portal application is in-active at the moment, that's why we used 'manual XI submitter', to send a message from G7A PI itself going to Trading Partner.
The message was success in the Integration engine of G7A PI, and the output message was produced.
As the message reached the Adapter Engine layer of G7A PI, we encountered a specific error,
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String), Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String)
Basically, "Could not create CPAObjectMapper - InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement"
I am thinking, one of the possible cause is that we used manual XI submitter, in G7A PI, instead of the utilizing the actual Sending system (EP Portal application).
Or possible cause is that the AS2 adapter in G7A is not yet stable, thus causing the issue.
We've already done successful connection when we're in GDD PI (Development box) during our SIT phase.
Objects in G7A were mirror of GDD PI.
Kindly advise for your inputs.
Thanks!
Gerberto

Hi,
It seems that the cause of the error is the unstable performance of the PI box, since, this was newly installed and there were patches that were not yet added.
Thanks for the support!
Gerberto

Similar Messages

I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any

I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any...
Only found one question similar and NO ANSWER to it.

Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

Idoc Error: Could not find code page for receiving system

hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty

"ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"

Hi,
I've already archived a lot of assets in my final cut server but since one week there is a message appearing when I click on an asset and choose "Archive". The pop-up says: "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"
Does anyone know what's the problem and/or have any suggestions to solve my problem?! I can't archive anymore since the first appearance of this message.
What happened before?
-> I archived some assets via FCS and then transfered the original media to an offline storage media. That system worked fine for the last months and my normal server stays quit small in storage use. But now, after I added some more new productions and let FCS generate the assets, it doesn't work anymore...
It's not about the file size - I tried even the smallest file I found in some productions.
It's not a particular production - I tried some different productions.
It's not about the storage - there's a lot of storage left on my server.
So, if someone knows how get this server back on the road - let me know.
THNX!
Chris

I would really appreciate some advice re: recent FCS search errors.
We're having similar issues to C.P.CGN's 2 year old post, it's only developed for us in the last few weeks.
Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
OS 10.6.x updates.
FCS is still usable for 6 of 8 offliners, but on some machines, searching assets presents "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
Assuming the OS and/or data drives on the FCS machine were failing, I cloned the database drive today and will clone the OS drive tomorrow night, but after searching the forums and seeing similar error messages I'm not so sure.
FCS has been running fine for last 4 years, minus the recent Java security issues.
Thanks in advance, any ideas appreciated!
cheers,
Aaron Mooney,
Post Production Supervisor.
Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.
epn.tv

FCS "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."

I would really appreciate some advice re: FInal Cut Server search errors.
FCS has been running well with our Linux based raid Editshare for 4 years, notwithstanding the recent Mac OS Java security issues.
Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
OS 10.6.x updates, ancient I know.
FCS is still searchable for most of our offliners, audio, gfx and onliner machines running 10.7+, but in some cases, searching FCS assets results in "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
Initially assuming the OS and/or data drives on the FCS machine were failing, I ran disk utility's repair, verify. time machine, and cloned the database drive. I'll clone the OS drive tomorrow, but after checking the forums tonight and seeing similar error messages I'm not so sure it a degraded drive issue.
Thanks in advance, any ideas appreciated!
cheers,
aaron,
Aaron Mooney,
Post Production Supervisor, epn.tv
Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.

I would really appreciate some advice re: recent FCS search errors.
We're having similar issues to C.P.CGN's 2 year old post, it's only developed for us in the last few weeks.
Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
OS 10.6.x updates.
FCS is still usable for 6 of 8 offliners, but on some machines, searching assets presents "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
Assuming the OS and/or data drives on the FCS machine were failing, I cloned the database drive today and will clone the OS drive tomorrow night, but after searching the forums and seeing similar error messages I'm not so sure.
FCS has been running fine for last 4 years, minus the recent Java security issues.
Thanks in advance, any ideas appreciated!
cheers,
Aaron Mooney,
Post Production Supervisor.
Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.
epn.tv

Error: Could not read Metadata from Portal Database !

Hi All!
My problem is when i am trying to open the portal page (Oracle 10G)
http://domain/portal/page?_pageid=6,1,6_13&_dad=portal&_schema=PORTAL
then i have an Error: Could not read Metadata from Portal Database.
And i do not know why because everything is up and running. I can connect and browse my database schema with portal user. I can connect to pls/orasso and where ever i want.
[07/Feb/2006:00:57:23 +0100] "GET /pls/portal/htp.p?cbuf=Test HTTP/1.1" 200 5
plz help i am trying to fix this in the last 2 weeks :)
thx kEndE

Hi Andreas,
I've changed the permissions to 775 and changed the ownership of /sapcd (volume name) to orasid:dba (including all files within the staging area /sapcd/ora-patch).
So the permissions and ownership seems to be fine.
I've also ran your suggested commands but the issue still exists.
I'm now liasing with our UNIX guy to check if there is any underlying permission issues on the volume (sapcd) that may be causing this problem.
In the mean time, let me know if you have any further thoughts.
Thanks,
Chris

Header Mapping in Receiver agreement.?

Hi All,
When we do B2B scenarios using AS2 adapters.
1. Is it mandatory to use Header Mapping in Receiver agreement.?
2. If yes, is it enough if we provide Party Names? or we need to provide Business system or Business service names as well?
3. What is the purpose of this Header Mapping?
Kindly share your answers.
Regards
Deepthi.
Edited by: deepthi reddy on Jan 31, 2008 6:49 AM

Hi Deepthi,
1) Is it mandatory to use Header Mapping in Receiver agreement?
https://www.sdn.sap.com/irj/sdn/forums
2)What is the purpose of this Header Mapping?
The header mapping is important when configuring cross- company processes in which the business partners want to replace the names of their internal business systems with neutral representatives (party, business service).
Example
if you are doing a file to IDoc scenario, now while mapping the data to IDoc in mapping if you map the IDoc segment called EDI_DC40 with all required data then you have to user the Header mapping in the agreement so that whatever data you have mapped will be picked from payload. And if you do not use this header mapping then then XI will take care of it.
You can do the following in the header mapping:
● Specify fixed values
● Define that the conversion of the field values is to be determined dynamically from the message payload
To specify the header mapping for an address field, select the check box for the field name (for example, sender service) and choose Display List of Permitted Values (This graphic is explained in the accompanying text).
There are different editors for specifying the party and service:
● Use the party editor to specify a party
● Use the service editor to specify a service
Caution
Header mappings are only supported by the following receiver adapters at runtime:
IDoc Adapter
Plain HTTP adapter
RNIF Adapter 2.0
RNIF Adapter 1.1
CIDX Adapter
3)If yes, is it enough if we provide Party Names? or we need to provide Business system or Business service names as well?
http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/frameset.htm
Regards
Azeez khan.

HEADER MAPPING in RECEIVER AGREEMENT use.?

Hi folks,
Can anyone explain me about the HEADER MAPPING in RECEIVER AGREEMENT. In which cases we go for this header mapping.
Give me an example if possible or any links regarding this.
Thanks in advance
Srinivas Reddy.

Dear Srinivas,
Go through the following link and you may get some idea on this.
http://help.sap.com/saphelp_nw70/helpdata/en/b2/1f17419b24f06fe10000000a1550b0/content.htm
Regards,
JP.

Error "could not find code page for receiving system"

Hello Everyone,
We are trying to load data and receive the message:
Could not find code page for receiving system
We have searched notes and this forum and can't find anything. We also checked WE20 and could not find anything wrong.
Can someone please elaborate specifically what this error is and where to fix it?
Thanks so much.
Colleen

I just upgraded to NW 2004 SR1, and when loading data from a non-unicoded R/3 system to our BW unicoded system I experienced the exact problem. Here is the resolution that is stated in note #613389 (it's not very clear in the note).
- Language EN must be specified in sm59
- Under Special Options -> RFC Bit Options
Make sure that Use Found Communication Code Page has a check mark.
Once this was done, the data loads started completing successfully.

Adobe Media Encoder for CS4 error Could not read from the source

Hello,
I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
- Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
- Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 16:10:34
1/21/2009 9:50:25 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been
deleted.
Thank you
Art

When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.

File Import error: Could not read from source (OS X 10.8.2)

I am having this time-wasting problem on a new Creative Cloud CS6 installation. I queue my Premiere exports normally on AME (CS6 updated versions), and they work fine if I start them right away. If the Mac is restarted however, they will fail giving this error. The log shows "Could not read from the source. Please check if it has moved or been deleted". It looks for the source file at /Users/Username/Library/Caches/Temporary/projectname.prproj. Isn't AME supposed to hold the queue even after a shutdown/restart? Premiere has been uninstalled and reinstalled once, so maybe that's the cause of it? Thanks.

Unfortunately, it looks like you've found a bug, an unplanned interaction between Premiere Pro's choice of temp directory and automatic OS behaviors.
Jeff is correct, AME will hold the Queue between reboots. The problem is with the temporary project that Premiere creates.
When you queue a sequence to AME from within Premiere (File > Export > Media, click the Queue button), Premiere creates a copy of the project in that temp directory. That is the file reference it sends to AME.
The problem is that Mac OS appears to flush that directory on reboot. Thus, when you reopen AME, it can't find the file anymore.
The bug is therefore that Premiere Pro is putting the file in a place where it can be deleted before being used. Sorry about that. I'll file the bug.
You can work around the problem using a different method to add your sequence to the AME queue. Inside AME, use the File > Add command. You can also drag and drop the sequence icon from the Project panel in Premiere to the Queue panel in AME. Or you can just not reboot until you've rendered what's in the queue.
I suppose it's possible that you could make Mac OS not flush the temp directory on reboot. There's a lot of fun things you can do in Terminal if you know the right commands. That's beyond my personal skillset.

Encore CS4 error "could not read from the source file"

- Source File: C:\Users\Anil\AppData\Local\Temp\2013 11 08 c Big Budha_9.prproj
- Output File: F:\Adobe Encoded Blu-ray\For Disk #013\Disk#013-B\2013 11 08 c Big Budha.m2v
- Preset Used: Full HD 1080i [MPEG] 30 MBPS
- Video:
- Audio:
- Bitrate:
- Encoding Time: 01:49:53
25-Jan-14 2:50:32 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
i have tried creaeted a NEW Premiere Pro project and still get the same error again ... can someone help me to figure out what is wrong ...

Hi Neil
I have been using file names with spaces and it has been working fine. As stated in reply to Jones, uninstall and reinstall of Premiere Pro CS4 has helped to get rid of this error.
also i did not use Dynamic link, but was trying to create MPEG file using Media Encoder and then import it in Encore.
your suggestion for H264 seems good and will try it.
x264 Pro is for CS5 and above versions, so it seems i can not use it and have to manage with Adobe Media Encoder's default. Hope i will not have any major technical issues.
please suggest me for below:-
1) i have 4 hours of Full HD footage and made 1080i MPEG2 files of 30mbps to fit in 2 seperate Bluray Disks.
2) now i plan to put all in one Single Bluray Disk by reducing MPEG2 file average data rate to 15mbps. will that work or is there any limitation of time in Bluray Disk.
3) Will it be ok to create H264 files at 30mbps [as you mentioned H264 reduces file size to half of MPEG] and still be able to fit 4 hours footage in one BR Disk ?
4) even though i specify Min 10 Target 25 Max 30 data rate for MPEG files creation, it creats file at data rate of 30 mbps, can you explain why it is happening as i thought my target rate should be 25 mbps and not the maximum rate specified.
Thanks ...
PS...
my source file is .mov 1920 x 1080i 29.97 fps from Canon 6D. first i tried to create progressive file in Encoder but while imported in Encore realised at 29.97 fps, it allows only interlaced file and had to transcode back to interlaced. so i stick to interlaced file.
Canon 6D also allows me to shoot in 24fps [motion movie] which Encore can handle as progressive file for authoring. What are the pro and cons of shooting in 24fps, if you can suggest.
Message was edited by: AnilHVarma

Interface Builder Error: Could not read archive

I created a new project in Xcode. I double click on MainWindow.xib and it opens up Interface Builder like it should, but then I get an error saying "Could not read archive". This happens every time with any project I have tried to start; please help.

I' ve the same problem. And if I make a new interface and save it, after a new klick on MainWindow.xib there's tthe error saying too.
Sorry for my bad Englisch, but I'm German.

Error: Could not read Header Mapping in Receiver Agreement

Similar Messages

Maybe you are looking for