Error cpsid_82829s1 on Win 8

Hi, i have install Photoshop 11 and Premier 11 on Win 8. After installation and login for register the products i have run the updating utility but after the download it show the error "cpsid_82829s1".
After i have download and install the Adobe Support Advisor and it find the restar append error. So i try to find the registry key: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager - InProgress" but i don't find any key with this name even with the find tool of the regedit.
Actually, after many reboot of win, Adobe Support Advisor still find the error "cpsid_82829s1" and i'm not able to update the adobe software that i have bought. I'm not able to understand which software still cause the restart of the win append..
Any other idea to solve the problem?

sorry but i have check win update and there are no win update running or to do in my win 8 (there is only suggest updates that i don't want to do), also i have check all the process in the task manager and i didn't find any setup.exe, msiexec.exe, msiexec.exe, Setup.exe, Install .exe, Bridge.exe, DynamicLinkServer.exe, Switchboard.exe, acrotray.exe, acro_sl.exe, reader_sl.exe, FNPLicensingService, IExplore.exe.
I have find only an agent of Photoshop that i have stopped/close and nothing else. Also i have tried to close some process that seems to be not so important for the system but nothing.. Adobe Support Advisor always find the "cpsid_82829s1" and relative restart append error.
I have tried to search the InProgress key but i still haven't found it in the registry.
I don't know what else to do..

Similar Messages

Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D using win 7 64bit over and over BSOD

Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D using win 7 64bit over and over BSOD
My event viewer has been coughing the error line above. It has lead to the feeling of a Carotid Artery leak of memory where my whole
system slowly stops working till BSOD. Windows Explorer just stops working then Death.
I HAVE HAD THIS HAPPEN MORE AND MORE, AND IT APPEARS TO BE A PROGRAM PROBLEM, ANYBODY ELSE HAVE THIS.
IT HAS COST ME 2 DAYS WORK NOW.
MIKE

Hi,
When does the issue begin to occur?
Since Windows system uses separated user mode and kernel mode memory space, stop errors are usually caused by kernel portion components, such as a hardware device,
third-party drivers, backup software or anti-virus services (buggy services).
Please refer to the following steps to troubleshoot the issue.
1. Boot the computer in
Clean Boot for a test.
2. Temporarily disable all unnecessary hardware devices in Device Manager, such as Modem, sound card or external device.
For detail steps, we can refer to the link below:
Device Clean Boot
3. Upgrade the virus definition, run antivirus program and perform a full scanning.
If the issue persists, please upload the minidump file (%systemroot%\minidump) to SkyDrive (
www.skydrive.live.com ), then share the link to me. I will be glad to assist you to analysis the data.
Thanks,
Novak

"Document is licensed for a different user account." error msge. Win XP, Adobe Digital Editions v1.7. (If I need to upgrade must I first go to v2.0 and then v3.0 to maintain my library?)

"Document is licensed for a different user account." error msge. Win XP, Adobe Digital Editions v1.7. (If I need to upgrade must I first go to v2.0 and then v3.0 to maintain my library?)

"Document is licensed for a different user account." error msge. Win XP, Adobe Digital Editions v1.7. (If I need to upgrade must I first go to v2.0 and then v3.0 to maintain my library?)

Error 0x800703EE on Win 8.1 machine when I tried to burn a DVD.

Hello,
I have below mentioned error when I tried to burn a DVD on my HP laptop.But same file can be copied to the USB drive without a problem.Can I have a solution for this ? Thanks in advance.
Error message : Error 0x800703EE : The volume for a file has been externalley altered so that the opened file is no longer valid.
Note : Win 8.1 - 64 bit

I have sorted out above issue by disabling the defender and Fire wall.Cheers ! :)

Error Code 0xC004F074 Win 8.1 Clone

Hello. I have a Toshiba P867-S7102 with two HDD bays. Bought an SSD and cloned WIN 8.1 to that drive, leaving the original HDD in the machine. Changed boot order to SSD first, and all works save the error code mentioned in the title which
will not allow the SSD OS to activate. If I change the boot order back to the original HDD, the OS is activated. The intent of this change is to place the OS and programs on the SSD and use the HDD for storage. I believe my conflict is I
the laptop thinks I have two OS versions running, but I am not sure how to deconflict.
Any help appreciated.

Hi,
According to your descritpion, your Windows 8.1 should be computer build in system and not activated by KMS server, isn't it?
If that it is, one OEM or retailed Windows Operate system license only available to one device. That's to say, you couldn't use one product key to activate another Windows system.
Roger Lu
TechNet Community Support

ITunes 12.1.1 installation errors and resolution (Win 7, 64 bit)

I am providing all of the installation errors I had experienced
and all of the methods I had tried until I finally came up with a solution.
Hopefully the details will help you see if your situation has similarities
which hopefully will make this post helpful in terms of a solution.
PART ONE: INSTALLATION ERRORS
I received the following installation errors
when attempting to update to 12.1.1
and later once I uninstalled and attempted to reinstall 12.1.1.
I used this link for the download:
http://www.apple.com/itunes/download/?cid=wwa-us-kwg-music-itu
> itunes 6464setup.exe
I then tried this link:
http://support.apple.com/kb/DL1614
> itunes 12.1.1 64 bit
Again 6464 in the name.
After uninstalling the iunes,
I discovered under add/remove programs:
apple application support 32 bit
and apple support update
I deleted these and restarted the PC.
I then tried reinstalling a NEW version
from the second link above.
Opened download iTunes 6464setup.exe >
Windows installer> iTunes > welcome to itunes
> next > installation options > install > user account control
> yes > next > (error message via pop-up window):
ERROR MESSAGE ONE
"An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32",
version = "8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b"
processorArchitecture ="amd64".
Please refer to Help and Support
for more information.
HRESULT: 0X80070091"
> OK > iTunes > Status: Starting services >
(error message via pop-up window):
ERROR MESSAGE 2
"Service 'Apple Mobile Device Service' (Apple Mobile Device Service)
failed to start. Verify that you have sufficient permission to start system services"
SIDE NOTE
There was a USB cable connected to the PC to charge the iPhone,
but the iPhone was not connected. I detached the USB cable from the PC in case it's relevant.
(I did not reattach the USB cable until I finally got a copy of itunes to install. You will see later in this post below.).
I then clicked Retry.
ERROR MESSAGE 2 AGAIN
I received the identical 'Apple Mobile Device Service' error as above.
I then clicked Ignore.
iTunes > Status
> User Account Control pop-up window)
> Do you want to allow to install Apple iTunes>
Yes >
> Congratulations > Finish
> (iTunes pop-up error window):
> iTunes Helper
ERROR MESSAGE 3
a)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 "
> (iTunes pop-up error window)
> iTunes
b)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2)"
> OK > OK
ERROR MESSAGE 4
I received all of these errors above
when I had tried a fresh install before returning to the forum to search for answers.
When I had first tried a fresh install, I didn't get as far as the Congrats.
I only got as far as the first and second error listed above
("An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32"...
AND Service 'Apple Mobile Device Service' (Apple Mobile Device Service").
Clicked on iTunes icon on desktop
ERROR MESSAGE 5
I receive the (iTunes pop-up error message window)
error 2 windows error 2 (identical to what's listed listed under 3b).
PART 2 - INSTALLATION RESOLUTION
The issue finally is resolved.
HERE IT IS!!!
1) Uninstall iTunes
2) check remaining Apple programs
(click control panel > programs > uninstall)
> check the listed Apple programs
Apple Application Support 32 bit,
Apple Mobile Device Support,
Apple Software Update,
Bonjour
3) Locate and save the correct file version of iTunes for your OS and System.
In my case, it's Win 7.
You must check for the System Type.
Computer > right click to properties > system type.
In my case its 64 bit.
The 32 bit installer is named iTunesSetup.exe,
while the 64 bit installer is named iTunes64Setup.exe.
I learned that some folks had experienced issues with
the 64 bit installer on the Apple site whether it's
because they had downloaded the 32 bit
when they needed the 64 and therefore
couldn't complete the install or in my case,
what appears to perhaps be a corrupted file that stated 6464 in the .exe file name.
This lead me to believe that finding the file with the correct file name and
correct file size to prove it authentic for that version would likely be part of
the solution if not the solution. File Hippo is one suggested means to locate the file.
I locate the iTunes download "iTunes64Setup.exe" that matched the size of the file
to a valid copy of that version of ITunes and I set it aside.
4) I then made sure that all old copies
and remnants of iTunes and Apple software
has been uninstalled by checking add/remove.
Then C: program files
and then C: program files (x86),
then running CC Cleaner,
then cleaning the registry using CC Cleaner
and then checking Tools under CC Cleaner.
***I discovered under Tools that there were remaining Apple files listed
after the uninstall of iTunes and other files had taken place under iTunes***
I visit tools under CC Cleaner and deleted the remaining Apple files
including Apple Application Support, Mobile Device Support, and Bonjour,
***but I leave the Apple Software Update folder as is, in tact***
under C: Program files (x86) and Tools of CC Cleaner and under Add/Remove.
5) I restart the computer, install the new copy of iTunes 12.1.1 (64 bit),
iTunes64Setup.exe, and it installed with zero errors.
Hope someone will find this useful. Good luck.

Try the "for older video cards" version.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

0xc004e003 error while activating Win 7 Pro on Portege R930-17L

Toshiba Portege R930-17L
S/N: 5D016093H
(If I search on Toshiba after SN I only find it in Toshiba - Ukraine)
Bought from "Sigmanet" online shop in Romania.
It has a sticker on the back side w/ Windows 8 Pro (small sticker without product key).
It arrived with Windows 8 install CD.
On it was preinstalled Windows 7 Pro SP1 x64 (this notebook has the right to use Windows 8 and Windows 7)
Of course, the preinstalled OS was running slow and gave errors (McAfee AV preinstalled, a bunch of small apps, a.s.o.)
I reinstalled Windows 7 Pro SP1 x64 (original CD) on clean partition.
I can't activate it with the following:
Product Key: XXXXX-YYYYY-ZZZZZ-XXXXX-YYYYY
Product ID: xxxxx-OEM-xxxxxxx-xxxxx
Error code: 0xc004e003
Now, I've spoken with Microsoft Romania, they tried to help me but they failed.
They told me that the license appears to be blocked from Toshiba, so they suggested me to contact them (Toshiba) for unblocking the license or for providing a new product key.
So, I've contacted the seller. They passed me to Toshiba authorised service in Romania which avoids to help me.
Now I'm stuck. What to do or whom to contact. Everything is so blurry ...
I appreciate any response you can give me. Thanks!

> It has a sticker on the back side w/ Windows 8 Pro (small sticker without product key).
>It arrived with Windows 8 install CD.
>On it was preinstalled Windows 7 Pro SP1 x64 (this notebook has the right to use Windows 8 and Windows 7)
Toshiba notebooks are preinstalled with Windows systems which are already activated.
The stickers you can find at the bottom of the units are OEM serial keys and such keys dont work in connection with other different system. The OEM key belongs to the preinstalled image.
So in case you would use the Toshiba recovery disk and would install the Windows system using such disk, the serial key would not be necessary.
According to the Toshiba specification page:
http://www.toshiba.co.il/en/laptops/portege/r930/portege-r930-17l/ the notebook was preinstalled with Windows 7 Pro 64bit.
This means that Win 7 Recovery DVD was not part of the package. Why?
because the Toshiba Recovery Media Creator software was preinstalled on such notebook. The software allows you to create the Recovery DVD containing the Win 7 64bit Pro system and image which is activated.

Mtp usb device failed error - iphone 3g - win 7 pro

I have iphone 3g. I use Win 7 pro OS. when i plug in iphone to usb port, i get error message as - device driver failed to install - in detail - mtp usb device failed..
In iTUNES i am able to view the iphone, sync my contacts with MS outlook etc..
kindly help
shansui

What a load of hogwash.
I've just had this error come up - WITH NO CHANGE OTHER THAN UPGRADE OF IPHONE 4 TO IOS 5.1.1.
(running iTunes 10.6.1.7 on 64 Win7)
Powered phone off, and back on again - same error... Haven't had to reinstall windows in a few years - maybe iTunes is now the least stable software in my collection - Might have to try the two (button) salute to Apple...
Error on device "MTP USB Device";
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

"Your PC needs to be repaired" Error: 0xc0000225 in Win 8.1 Enterprise

I just can't figure this one out.
I had Windows 8.1 Enterprise installed on a UEFI laptop with an after-market SSD. It co-existed with Linux on another partition, and I was able to use Linux's GRUB bootloader to load either of the OS's (or, I could select the Windows bootloader
in my UEFI settings).
Then, at some point, I started getting blue "Your PC needs to be repaired" screens when I tried to load Windows 8.1.
I've tried going through the boot-repair process from the Win 8.1 Ent DVD (and
also from the Win 8.1 Pro and Win 8.0 Pro, just in case... because Win 8.1 Ent DVD can't repair a Win 8.1 Pro installation,
and vice-versa.. and there's no way to tell which version you have on your DVD or on your PC just by examining the files).
What's strange is that I'm able to install another copy of Win 8.1 Ent to another partition on the drive, and the Windows bootloader detects two other "Windows 8.1"s that it offers
to boot from (so, 3 menu items total, counting the one I just installed), but trying to boot either of the other two just gives me the "Your PC needs to be repaired" 0xc0000225 error.
I can see the original Windows 8.1 partition and all of its files just fine. And the Windows bootloader on the EFI partition is good, or else I wouldn't be able to boot the new Windows install.
Any ideas? How can I figure out which files are missing on the old Windows 8.1 partition?

Here is the way I fixed that problem with one partition (not two like you have). That error is coming from HP and not windows. I believe the boot sector or whatever is supposed to be there was corrupted by Windows 10. Because I could press the
bios key and see bootload, efi, and windows files on the disk. but none of them worked.
I fixed this basically like this:
turn on safe mode in bios
change boot order to put USB up front
install Ubuntu from USB thus erasing Windows (If I had a Windows start disk I could have used Windows. But I found no way to do that from Ubuntu.)
Regarding HP bios, I learned that you press f8, f9, f10, or f11 when you power up the computer to get to the bio screens and escape from the vicious circle of the blue screen with the "your pc needs to be repaired error." You have to wait until
the blue screen goes to sleep again and repower the computer to switch to another option. None of those keys will work until you do that.
Also it appears that with the HP Envy Dv7 there is no way to get it to boot from SSD. So you have to install Windows on a HDD.

Error code 50 Win 7 pro 64 bit

I received the desktop update notification, tried to update it and kept getting this error message:
I uninstalled the desktop app, tried a clean install and I still keep getting this error message.
I am also running another machine on Win 7 Pro 32 bit and I haven't had this issue.

1) End all Adobe related process from Task Manager .
2) Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, let me know whether you can see the option : Adobe Creative Cloud ?
If not proceed with below steps.
3) Open C:drive and navigate to C:\Program Files (x86)\"Common Files"\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4) Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
Note : Disable Anti-Virus and Firewall temporarily
5)
Click on the below link and download Adobe Application Manager and install the same .
http://download.adobe.com/pub/adobe/creativesuite/cc/win/ApplicationManager9.0_all.exe
6)Once installed , it will create Adobe Application Manager shortcut icon on Desktop .
Double click on it.
It will start update process and gets updated to Creative Cloud.

Error building blink Win IoT

Cannot find forum for Win IoT so added to the closest I could find.
Hi anyone experienced this error when building the Blinky example ?
1>------ Build started: Project: Galileo Wiring App1, Configuration: Debug Win32 ------
1>A task was canceled.
1>A task was canceled.
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========
========== Deploy: 0 succeeded, 0 failed, 0 skipped ==========
Can't get past it, I am connected to the board via Telnet with no issues so shouldnt be connection problem. Thanks in advance.

Hello,
Please consider use the Contact Us for help:
http://ms-iot.github.io/content/ContactUs.htm
MSDN seems do not have the forum you mentioned.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ADF 11g: Error with IE8, Win 7 OS

Hi ,
I am using ADF version 11.1.1.3.0, my hosted application is running fine with IE-7 on XP, Vista OS
But when i am trying to access application using IE - 8 on Win 7 OS i am getting below mentioned error:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.3; MS-RTC LM 8)
Timestamp: Fri, 7 Jan 2011 10:41:38 UTC
Message: Permission denied
Line: 4354
Char: 1
Code: 0
URI: http://10.21.136.19:8103/EmersonMMI-EmMMI-context-root/afr/partition/ie/default/opt/boot-11.1.1.3.0-0084.js
Please help to resolve this
Thanks n Regards
Manav Ratra

Hi Manav Ratra,
Me too having the same configuration as said but i am running all ADF apps fine....
U might have local machine problem... try running the same in IE-8 compatibility mode and also try with Win 7 Firefox
Regards,
Suganth.G

Error while installing Wine Port

This is what i get when i type "sudo port install wine"
---> Computing dependencies for wine
---> Dependencies to be installed: apple-gcc42 cctools ld64 libunwind-headers llvm-3.1 libffi llvm_select gcc_select bison gettext expat libiconv gperf ncurses m4 xz flex fontconfig freetype bzip2 zlib pkgconfig glib2 perl5 perl5.12 gdbm gst-plugins-base gnome-vfs desktop-file-utils popt gconf dbus-glib dbus gtk-doc docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list-utils p5.12-xml-parser iso-codes libxslt libxml2 py27-libxml2 python27 db46 libedit openssl python_select sqlite3 rarian getopt gtk2 atk gobject-introspection cairo libpixman libpng xorg-xcb-util xorg-libxcb xorg-libXau xorg-xproto xorg-libXdmcp xorg-libpthread-stubs xorg-xcb-proto xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans xorg-renderproto gdk-pixbuf2 jasper jpeg tiff hicolor-icon-theme pango Xft2 shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXext autoconf help2man p5.12-locale-gettext automake libtool xorg-util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto orbit2 libidl policykit eggdbus gnome-mime-data gstreamer gzip texinfo libtheora libvorbis libogg orc lcms mesa makedepend xorg-dri2proto xorg-glproto xorg-libXmu xorg-libXt xorg-libsm xorg-libice xorg-libXxf86vm xorg-xf86vidmodeproto
---> Building libunwind-headers
Error: org.macports.build for port libunwind-headers returned: command execution failed
Error: Failed to install libunwind-headers
Please see the log file for port libunwind-headers for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org _release_tarballs_ports_devel_libunwind-headers/libunwind-headers/main.log
Error: The following dependencies were not installed: apple-gcc42 cctools ld64 libunwind-headers llvm-3.1 libffi llvm_select gcc_select bison gettext expat libiconv gperf ncurses m4 xz flex fontconfig freetype bzip2 zlib pkgconfig glib2 perl5 perl5.12 gdbm gst-plugins-base gnome-vfs desktop-file-utils popt gconf dbus-glib dbus gtk-doc docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list-utils p5.12-xml-parser iso-codes libxslt libxml2 py27-libxml2 python27 db46 libedit openssl python_select sqlite3 rarian getopt gtk2 atk gobject-introspection cairo libpixman libpng xorg-xcb-util xorg-libxcb xorg-libXau xorg-xproto xorg-libXdmcp xorg-libpthread-stubs xorg-xcb-proto xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-xcmiscproto xorg-xextproto xorg-xf86bigfontproto xorg-xtrans xorg-renderproto gdk-pixbuf2 jasper jpeg tiff hicolor-icon-theme pango Xft2 shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXext autoconf help2man p5.12-locale-gettext automake libtool xorg-util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto orbit2 libidl policykit eggdbus gnome-mime-data gstreamer gzip texinfo libtheora libvorbis libogg orc lcms mesa makedepend xorg-dri2proto xorg-glproto xorg-libXmu xorg-libXt xorg-libsm xorg-libice xorg-libXxf86vm xorg-xf86vidmodeproto
To report a bug, follow the instructions in the guide:
http://guide.macports.org/#project.tickets
Error: Processing of port wine failed

I had a similar problem but with xorg-libXcursor.
WineBottler works but is out of date compared to the release version of wine in macports.
(Macports is running the same version as WineHQ)
Did you read the log file and if so what did it say? (Just the bits near the end where you get the Error message)
Mine said it couldn't create /tmp/library so I deleted it as it didn't contain anything important.
Ran sudo port install wine again and it's now gotten past the Xcursor library.

Error when compiling wine

So, I have my 32bit chroot all set up, I installed all the dependencies, then went to install this wine:
http://aur.archlinux.org/packages.php?ID=27298
but after about 15-30 minutes of compiling I get this:
make[2]: Leaving directory `/home/phil/wine-wc/src/wine-1.1.38/programs/winedevice'
make[2]: Entering directory `/home/phil/wine-wc/src/wine-1.1.38/programs/winefile'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/phil/wine-wc/src/wine-1.1.38/programs/winefile'
make[2]: Entering directory `/home/phil/wine-wc/src/wine-1.1.38/programs/winemenubuilder'
../../tools/winegcc/winegcc -m32 -B../../tools/winebuild --sysroot=../.. -mwindows winemenubuilder.o -o winemenubuilder.exe.so -luuid -lshell32 -lshlwapi -lole32 -luser32 -ladvapi32 -lkernel32 -lwine ../../libs/port/libwine_port.a -Wl,--hash-style=gnu -Wl,--as-needed
winemenubuilder.o: In function `SaveIconResAsPNG':
winemenubuilder.c:(.text+0xa9d): undefined reference to `png_set_longjmp_fn'
collect2: ld returned 1 exit status
winegcc: gcc failed
make[2]: *** [winemenubuilder.exe.so] Error 2
make[2]: Leaving directory `/home/phil/wine-wc/src/wine-1.1.38/programs/winemenubuilder'
make[1]: *** [winemenubuilder] Error 2
make[1]: Leaving directory `/home/phil/wine-wc/src/wine-1.1.38/programs'
make: *** [programs] Error 2
==> ERROR: Build Failed.
Aborting...
[phil@fml wine-wc]$
Any ideas, or is the package just bad?
Last edited by Dethredic (2010-02-07 00:51:47)

wonder wrote:
now you find out why is not updated in our repos .
http://old.nabble.com/libpng-dependency … 28353.html
the thing is Luca Bennati said that is fixed by some patch sent but i never found it and i didn't had any motivation to subscribe and ask for clarifications.
Thanks, I sent him an e-mail. I see in your blog that there was recently an update to libpng, so maybe if I try installing an older version it will work?

Error 45048 - itunes - Win XP PRO

I have a problem with my iTunes. After i updated my iTunes to 11.1.3.8, i can no longer download songs, apps or updates apps with my iTunes PC. The notif always, "An unkown error occured (-45048). I use windows XP PRO service pack 3. i try to uninstall the iTunes and then install it again but nothing happened. Same problem. i dont know where is the problem. I saw that for Win 7 there is a solution by deleting the SC Info folder... but what is solution for Win XP PRO ?

I am not re-ripping my CD's to AAC
Huh?
Then why did you write, "decided to use iTunes, and set it to Rip my CD's to AAC"?
If possible (and for best quality) you should RIP for the CD and not convert between lossy formats (AAC/MP3/WMA).
My question was simply why does iTunes take 3 times as long to RIP a CD at 128kbs AAC then WMP10 does to rip a CD to 192kbs WMA, and what can I do to give iTunes a boost?
In response to yoru question, Pac wrote;
"1) UPDATE FIRMWARE for the CD burner drive and get the latest updates for your system,like BIOs hardware ect ect from the PC makers site
2) Slow the burn speed from "Max" downto 16x 8x or 4x"
The reason I would prefer to go with AAC is that for the "same" bit rate/quality as MP3 you actually end up saving some space - on my calculation about 25% - so that is preferable.
You must be calculating something incorrectly.
Using iTunes to RIP, AAC and MP3 at the same bit rate are almost identical in file size.
The quality is definitely not the same.
There are better MP3 codecs available(LAME).
if there is other software out there that will RIP to AAC - and is faster than iTunes - then let me know.
Yes, there are different apps that will RIP AAC, but I can't recall offhand.

Error cpsid_82829s1 on Win 8

Similar Messages

Maybe you are looking for