Error create a software component

I am trying to create a software component in SLD, but I am getting following error.
<b>Unknown reference instance in CIMPropertyReference key property </b>.
I am giving following parameters .
Product : TBIT40_WORKSHOP,1.0 of SAP
Vendor :sap
Name : PRASHANTH
Version: 1.0
can any one please help me create a SWC and also let me know how to create Product in SLD <b>I am new to XI</b> .

Hi Prashanth,
More on -
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/481955dc9e42c19d5a1bc3b8aead81/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/12/003479fa4c2d4aa9d175dcbb081d66/frameset.htm
doubts in funda's of XI
Hope this helps
Regards,
Moorthy

Similar Messages

Error while Deleting Software Component

Hi All,
I am getting following error while deleting Software Component Version:
Unable to Delete object DELETEDEMO_COMPONENET, 1.0 of delete.
You cannot delete a sotware component version if it contains imported interfaces.
Is there any shortcut isntead of deleting all objets manuually?
Sri

Hi Sri.
It's very simple
Solution:
Double Click on Software Component, On Right Hand side >Go to Software Component Version->Delete the software component.If all the necessary Objects have been properly deleted, there will be no problem in Deleting the Software Componet version
1) Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings.
2) There should be no Imported SAP Objects in the Software Component. If any delete them and activate changes.
3) Delete all namespaces in the editor using sign. Do not save the changes.
4) Delete the two default data types that are created in the Interface Objects-->Data Types of the software component version (ExchangeFaultdata, ExchangeLogdata). Now save changes for the s/w component version and activate the changes. Ignore the warnings that pop-up.
5) The radio button for u201CInterface import should be at u201CNot permittedu201D instead of u201CImport RFC and IDoc Interfaces from SAP Systems Permittedu201D.
6) Now go to Software component version menu in the right hand pane. Click on delete and the software component vanishes from left hand pane
>> Is there any shortcut isntead of deleting all objets manuually?
NO.. other way or any any shortcut for this
Abid

How findout who created a software component:

I am in a situation where I have to findout which user (userid) created a software component in SLD and imported them into IR and created many namespaces?
Is there a way to find out?
Regards,
N.S

hi,
open IR click on the software component version
then choose properties from the software component version's menu
and then you see who changed the SWC
(created namespaces etc)
Regards,
michal

How to create Product, Software Component..after the XI Installation

Hi Experts,
SAP XI was installed completely. After this, I would like to test some sample File File scenario. But I am not sure, how to create the Product, Software Component etc. I am able to login and run the SXMB_IFR to get the XI tools.
Can some one please provide the initial steps / procedure, what else I need to do (like creating Product, Software Component etc) as soon as the XI installation was finished.
Thanks in advance.
Sree

hi Sree,
You can create this in SLD>Software Catalog>new Software component and create the SWC with the new version.
As you know, the SWC acts as place holder for all your design objects. In simple terms, the newer version will be an enhancement to your older released version with added functionality.
Also refer to the following links on help.sap.com for more detailed explanation and look for the compatibility changes when developing a new software component version.
http://help.sap.com/saphelp_nw04/helpdata/en/29/17647d028113439108ce1161263b6e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/71/0b99063e1f974d9f25951746d04dc3/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/87/59c5726d8b5141bf22831a6ce79d8a/content.htm
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
/people/scott.braker/blog/2005/01/20/software-deploymentcomponent-archive-basics
please reward points
Regards
Sreeram.G.Reddy

System Error While Deleting Software Component from Repository

Hi,
I have deleted datatypes,Interface types,Message types,Interface Mapping & Message Mapping also.
When im deleting Software Component from Repository,
I m getting the following System Error.
[-9402]:System Error:AK Unexpected Strategy information.
and im not able to delete.
Plz Suggest me.
Sree Ram.

hi stree ram...
u can get tth note directly form SAP service or go to transaction 'snote'....
and ther u can import it from the menu bar thers a option of download/upload....just put in the note no.
regards...
vishal
P.S : assign pts if answer found helpful

Unable to create new software component

Hello All,
I am having these troubles with SLD.
1) I am unable to create products for SAP Systems in the catalog. Whenver I select a new product the message always says new product for non-SAP system.
2) I am unable to create software components for products for non SAP systems. Whenever I try adding new software components I get an error on the production state
Value not allowed by VALUEMAP for property SAP_SoftwareComponent.ProductionState:Released
Any ideas? I am using NW2004S SP4.
Thanks

Hi,
I am using NW2004s SP06. The same problem persists in SP6 also. As Wolfgang says, If this issue has been resolved in SP5, how come it still persists in SP6?
Does anyone have any solution?
Please guide.
Thanks & regards,
Sandeep

Error while importing Software Component from SLD

Hi,
On hitting runtime workbench i am getting the following error.
Unable to read XI domain from the SLD. Monitoring cannot therefore be configured. Error message: com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
Thanks,
RPN

Read,
http://help.sap.com/saphelp_nw70/helpdata/en/11/0dfe55e0c8fc4e910706a47ca6859b/frameset.htm
Regards
Juan

Error in Integration Scenario: No software Component version exists

Hi Experts,
We have external product and software component like Product "Project Management" we have imported the CIM content for it
Now when we create an Application Component for the same in Integration Scenario in ESR (PI7.1)
while trying to do right click --> Edit Action it gives Error
"" No imported software component version exists for product"
Also note that it allows us to Add new Action there
that is we can right click --> Add action
Kindly help with your suggestions to resolve this << Moderator message - Everyone's problem is important >>.
Regards,
Jagadish
Edited by: Rob Burbank on Nov 10, 2010 3:56 PM

Hi Experts,
Tried the steps given in SAP Note: 768148
Still it is not resolved.
I appraiciate if any one suggest some more options to resolve this.
Regards,
Jagadish

Can't see created Software Component in CMS

Hi
I have created a software component in the SLD (NW 2004s SP2). Now i want to develop it. But when i try to add this software component to my track in the CMS, i can't find it. I suggested in an another forum post, i try to push the "refresh" button in the CMS but it doesn't help.
Thx 4 help

Hello Marc
...its very strange. Now i have the same problem as before. I think i solved it, but i'm wrong.
There is a button labeled "synchronize dependencies", but no solution for my problem. I have create 2 software components in the SLD. One without any dependencies and one with 3 other software components dependencies. I made two tracks in the CMS and import them into my NWDS. Then i remember, that my defined dependencies are wrong. So i delete both tracks in the CMS. In the SLD i decide to delete one software component and edit the other one. I add my needed software components in the SLD to my custom software component. Now i create a tack again and want to add my custom software component, BUT there are shown both old software components in the table, where i can select/search my custom component. If i press the "synchronize dependencies"-button, nothing happened.

How to Create a New Software Component

Dear All,
I am trying to prepare a list of steps to develop add-on products over SAP ECC 6.0. I was just wondering how to create a Software component for my namespace development, which I would like to assign my development package to.
Any ideas or guidance is highly appreciated.
Regards
VG

Hi VG,
I think I am just facing the same issue right now. Like you we do not want to do XI/PI development. We registered namespace and starting on developing a product based on ECC, which should be on a seperate namespace. We have read of AddOn Assembly Kit, but we don't have it for th emoment. We might have it at a later stage.
Still we would like to create an own Product and SC for shipment purposes. We created Product and SC in SLD but we are not able to select it in the SE80 dialogues of creating development objects. We haven't found away or documentation on how to sychnronize the SCs from SLD to ABAP system.
Is it possible to create SCs in the systme directly which will then show up for development objects?
Is it mandatory to have the Assembly Kit? (costs good money)
Is it possible to do all that in a later stage? (we saw it's possible to reassign SC for dev ojects)
I know it's been quite some time, I would still highly appreciate a feedback as SAP docu is very limited.
best,
Stefan

Problem in importing software component

Hi
I created a software component,when i tried to import it into repository, i am getting following error
Communication with JMS server failed Repeat the last action. If the problem continues to occur after multiple attempts, contact your system administrator to check the availability of the JMS provider service
if i again try to import it i am getting following error
ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "/sapmnt/XID/global/security/data/SecStore.properties" does not exist although it should..
even if i am trying to import standard software components also i am getting above error,
pls suggest me what could be the possible solution
regards
raghu
Edited by: raghu y on Dec 29, 2008 10:19 AM

Hi,
the problem seems to be connection to the database or may be database URL is incorrect.
The problem can be solved via the Visual Administrator or by a manual modification of the data-sources.xml file.
Visual Administrator --> Server --> Services --> JDBC Connector -->Select DataSource
Change the URL given in the Database URL field with the appropriate one & save it.
For step by step process refer
http://help.sap.com/saphelp_nw04/helpdata/en/5c/2f2c4142aef623e10000000a155106/frameset.htm
Thanks
Swarup

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
                                    OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1.      Call the wizard-based configuration tool as described in Configuration Wizard.
       2.      Select the scenario PI and the task PIPostInstallProcess.
       3.      Choose Execute.
A list of the steps to be executed by the wizard is displayed.
       4.      Choose Install.

Problem importing Software Component & DO's in 7.1 NWDS.

HI Experts,
I have created a Software Component in 7.1 Data Orchestration Workbench, also I have created a simple MI Application for Laptop in 7.1 SP03. Now when-ever i try to create a new Model it shows me the list of software components present on my Workbench. And after selecting mine when i say finish it gives me an error as stated below.
Status ERROR
Plugin : com.sap.ide.cmi.core
code=0
Internal error
   Plugin name: Common Model Tools Core
   Internal error : com.sap.ide.cmi.core
   Class      : com.sap.tc.mobile.dt.metaimp.ModelImportWizard
   Method     : run(IProgressMonitor)
   Message    : Failed to create model
   Exception : com.sap.ide.metamodel.general.exception.ObjectRequiredException: ModelClassPropertySetting "//WebDynpro/ModelClass:test.com.CUSTOMER_CUSTOMER_DETAILS/Property:SYNCKEY_MMW/Setting:backendKey", Role "SettingDefinition": A minimum of 1 object(s) is required ObjectRequiredException: ModelClassPropertySetting "//WebDynpro/ModelClass:test.com.CUSTOMER_CUSTOMER_DETAILS/Property:SYNCKEY_MMW/Setting:backendKey", Role "SettingDefinition": A minimum of 1 object(s) is required at com.sap.ide.metamodel.webdynpro.implementation.ModelClassPropertySettingProxy._validate(ModelClassPropertySettingProxy.java:358)
at com.sap.ide.metamodel.core.DevelopmentObjectProxy.validate(DevelopmentObjectProxy.java:825)
at com.sap.tc.mobile.dt.metaimp.MBOModelImporter.doImport(MBOModelImporter.java:170)
at com.sap.tc.mobile.dt.metaimp.ModelImportWizard.createModel(ModelImportWizard.java:200)
at com.sap.ide.cmi.core.model.importer.CMIWizard$2.run(CMIWizard.java:197)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
Please guide me further.
Thanks in advance....
Rajesh

Issue got resolved....
please refer to the thread below if you face same problem..
Unable to create Model from DOE Data Object
regards
rajesh

Why Underlying Software Component not in BASIS objects

Hi,
this problem has puzzled me for a while.
I've create a software component SC1 in SLD with dependance on 2 software components SC2 and SC3 .
SC2 also has a dependance on SC3.
When I import the software component from SLD , SC2 and SC3 are liste un the "underlying software component versions for basis objects list" in the SLD Information tab of the Software component in ESR . However, in the details tab , only SC3 appears in the underlying software component versions list.
This then means that SC2 is not in the basis objects and I need to manually add the SC2 in the details tab in order to use it.
I dont mind but when you transport the SC, you need to do this again in every environnement which is error prone.
Does anyone know why this is the case ... ? Do you have the same problem ? Solutions ?
Thanks.

Hi Patrick,
if A is dependend from B (you see B as prerequisite in A) then you should have :
at IB Repository A:
own namespaces and imported object
basis objects with
B-namespace and imported objects, not changeable (if they are active in B!)
at IB Repository B:
only own namespace and imported objects
Regards,
Udo

How to delete Software Component in XI ?

Hi,
I have created a Software component with a NameSpace Containing Some Scenarios. Now i would like to delete this Software Component as a whole from the IR.
I tried deleting :
1.From the SLD Software catalog - Deleted the s/w product and associated component , it was deleted in the SLD s/w catalog but no effect in the IR Side.
2.Deleted all the XI Objects and NameSpace in IR , but still empty software component exist in IR.
Any help in this Regards will be appreciated...

See this
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Regards,
Prateek

Error create a software component

Similar Messages

Maybe you are looking for