Error: Create Binary Relation: INTERNAL_ERROR ??

Hi,
while uploading documents in BSP-application, some users get the following popup: Create Binary Relation: INTERNAL_ERROR . They work with Internet Explorer. Have anybody ever seen this error or does anybody knows its reason? Many thanks.

Hello,
please make sure your arcihve system is always accessibble.
Is it possibble for you to debug the problem? The best would be to find the point where the error is raised and populated .
Can you tell us wich application you are using?
Regards,
Dezso

Similar Messages

Error When Create Invoice related to Project

Dear Friends,
Good Day,
I have been faced issue when i create Invoice related to project the following are the steps with the error :
1. Entered the header.
2.Entered the lines ( Line type, Amount, Distribute Account, and Fields that related to Projects...... etc).
3. Save then Action > validate i have one holds, the hold name is Dist Variance then after i Click on the distributions line I have the following error :
APP-SQLAP-97734: the system cant's generate distributions for 1 line because: Fatal Error:
Error Stack: &ERROR_STACK
Erro Stage: &ERROR_STAGE
Error Message: &ERROR_MESSAGE
Additional Information1: &ERROR_AGR1
Additional Information2: &ERROR_AGR2
Please Advice :)
Best Regards,
M.Qolaghassi

Please see if these docs help.
Projects Supplier Invoice Account Generation Error: APP-SQLAP-97734: The System Cannot Generate Distributions [ID 823787.1]
APXINWKB.fmb APP-SQLAP-97734 When Entering a Recurring Invoice With Closed Project/Task [ID 779704.1]
Grants Accounting: AP Invoice Workbench Drill Down to Distributions for Allocated Freight Gets APP-SQLAP-97734 Error [ID 845378.1]
APP-SQLAP-97734: When Attempting To Generate A Distribution In A Project Related Invoice [ID 1251796.1]
Overriding Project Supplier Invoice Account Generation Workflow CCID With User Entered Account [ID 360757.1]
Project Supplier Invoice Account Generation Workflow - attribute 'fnd_flex_applid' does not exist [ID 1252887.1]
Thanks,
Hussein

Error creating related syncBOs

Hello,
we are trying to create two related syncbo's.
When the related syncbo exists (has been synchonized),
the creation of the relating syncBO works fine.
But when we create a new related syncBO and a new relating one, the synchronization fails with:
"Sync key xxxxxxx for related sync bo YYYYYY missing"
We have checked that the order of the SyncBo defined in
the metadata (meRepMeta.xml) is right: The related syncBO
is on top of the relating one.
We are using MI 2.5 SP14.
Has anyone found this error?
Thanks in advance and best regards,
Angel

hello angel,
is this client specific error?
are you getting any exceptions too?
if you are creating both of the syncbos
(the related and the relating syncbos),
then you have to consider your syncbo's
upload order. the related syncbo instance
(the instance being referenced) should be
uploaded first, prior to the relating syncbo
(the instance referencing the other) upload.
hope this helps.
regards
jg

Error while creating Resource Related Billing

Hi, I've created service notification from IW51 and then service order for the same. I've created confirmation for the order from IW41. Now when I'm attempting to create resource related billing document in DP90 referring the service order, the system is showing "No expenditure items found".
I want to know the cause for this problem and the procedure to remove. the same.
Regards,
Pavi Ranjan

Enter the actual work in during IW41 - create confirmation. Then only the costing will get calculated accordingly.

Error 1020034 - Binary spreadsheet table token error.

Im getting this error, while retrieving in Essbase. I retrieved the same adhoc report in anothers system, Im getting the data. In my system Im getting this error
Error 1020034 - Binary spreadsheet table token error.

Usually an error like that is related to Excel 2007. The Essbase add-in still has the old Excel row limit.
The fix is usually to save to a lower version of Excel such as Excel 97-2003 Workbook (*.xls), and then save back up to Excel 2007.
Occasionally you will lose some Excel 2007 functionality that you will have to re-create, but not often.
Hope this helps.
Tim Young

Create PO related invoice - before goods receipt/confirmation

Hi all, sorry to ask this very basic question as our system is not working at the moment and I cannot test this out and have very little experience creating PO related invoice in SRM.
First of all, we are operating on SRM 4. I would like to find out whether it is possible to create an invoice with reference to a PO before we create the goods receipt.
The reason why I ask this question is because I was reading up on the IMS functionality that is available from SRM 5 onwards and it listed the functionalities that are available that weren't in the earlier releases. One point mentioned was on the ability to receipt invoice prior to confirmation of goods receipt. I also read from the help document that we can enter invoice with reference to PO for which confirmations have already been entered or for which no confirmations are expected. There is no mention on situations when the confirmation is not done yet.
Appreciate your advice on the above.
Cheers!
SF

Sorry all, I think I am confusing everyone. May be it's because the question is too basic. There is nothing fancy with the PO here. It's a PO initiated from SRM with goods receipt and invoice receipt indicator turned on BUT NOT GR-BASED invoice indicator. I just want to know whether it is possible for me to create an invoice with reference to the PO in SRM if I have not yer done the goods receipt. If I do this in ECC/R3, the invoice would have been blocked (if tolerance allowed).
Even though I know that this should be possible in SRM but because some statements in the SAP help documentation sort of implies that it might not be the case and I do not want to assume it. Plus I have not worked with creating PO related invoices in SRM before and so just want to confirm that it is working. It doesn't help when I was trying to test this scenario in our own system that the system outputs a message relating to backend communication not working.
However, I finally got a chance to test this in another client' site and found that it is possible to create an invoice with reference to a PO even before the goods receipt is posted. Though I have yet to find out why I am getting a different error in our own system, I am happy for now that it is working.
Thanks all for your reply!
Regards
SF

Form Error Message: Invalid relation attribute on pageSet xfa

Hi,
I've developed a form that many folks are using without any issues. However, I do have a small number of users that get the following error message when opening the form.
Error Message: Invalid relation attribute on pageSet xfa[0].template[0].form1[0].#pageSet[0]
This error only appears to come up if they are using Adobe Acrobat Pro Version 8. No issues on versions 9 or 10 (X). The form is suppose to be compatible back to version 7.
My main form is called (form1). Then there are 4 major sub forms under (form1), The top drop down (on the masterpage) hides or displays one of the major sub forms based on user selection.
I have a hunch that something with the generated code not jiving well with Acrobat 8.
Here's a snippet of the code if you'd like to look through it.
form1.#pageSet[0].MasterPage1.FormActionDropDown::change - (JavaScript, client)
//+ GENERATED - DO NOT EDIT (ID:D2FF16C4-6D1F-45D4-ACB7-0DB7CE14229F CRC:3650232787)
//+ Type: Action
//+ Result4: SetPresence("$Node5","hidden")
//+ Result3: SetPresence("$Node4","visible")
//+ Result2: SetPresence("$Node3","hidden")
//+ Result1: SetPresence("$Node2","hidden")
//+ Node5: form1[0].ChangePAForm[0]
//+ Node4: form1[0].Non-PAForm[0]
//+ Node3: form1[0].DeletePAForm[0]
//+ Node2: form1[0].PAForm[0]
//+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
//+ Condition1: ListField("$Node1","textselected","ADD NON-PA User")
//+ ActionName: DropDown.change.NonPA
if ($.boundItem(xfa.event.newText) == "ADD NON-PA User") {
this.resolveNode("PAForm").presence = "hidden";
this.resolveNode("DeletePAForm").presence = "hidden";
this.resolveNode("Non-PAForm").presence = "visible";
this.resolveNode("ChangePAForm").presence = "hidden";
//+ GENERATED - DO NOT EDIT (ID:662A28BD-A30A-4E6D-92CD-6FF22B0EFB5D CRC:2945493746)
//+ Type: Action
//+ Result4: SetPresence("$Node5","hidden")
//+ Result3: SetPresence("$Node4","hidden")
//+ Result2: SetPresence("$Node3","visible")
//+ Result1: SetPresence("$Node2","hidden")
//+ Node5: form1[0].ChangePAForm[0]
//+ Node4: form1[0].Non-PAForm[0]
//+ Node3: form1[0].DeletePAForm[0]
//+ Node2: form1[0].PAForm[0]
//+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
//+ Condition1: ListField("$Node1","textselected","DELETE EXISTING PA")
//+ ActionName: DropDown.change.DeletePA
if ($.boundItem(xfa.event.newText) == "DELETE EXISTING PA") {
this.resolveNode("PAForm").presence = "hidden";
this.resolveNode("DeletePAForm").presence = "visible";
this.resolveNode("Non-PAForm").presence = "hidden";
this.resolveNode("ChangePAForm").presence = "hidden";
//+ GENERATED - DO NOT EDIT (ID:66B7091F-75C5-4A73-8ACA-885AE42D0308 CRC:2169512649)
//+ Type: Action
//+ Result4: SetPresence("$Node5","visible")
//+ Result3: SetPresence("$Node4","hidden")
//+ Result2: SetPresence("$Node3","hidden")
//+ Result1: SetPresence("$Node2","hidden")
//+ Node5: form1[0].ChangePAForm[0]
//+ Node4: form1[0].Non-PAForm[0]
//+ Node3: form1[0].DeletePAForm[0]
//+ Node2: form1[0].PAForm[0]
//+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
//+ Condition1: ListField("$Node1","textselected","CHANGE / MODIFY EXISTING PA")
//+ ActionName: DropDown.change.ChangePa
if ($.boundItem(xfa.event.newText) == "CHANGE / MODIFY EXISTING PA") {
this.resolveNode("PAForm").presence = "hidden";
this.resolveNode("DeletePAForm").presence = "hidden";
this.resolveNode("Non-PAForm").presence = "hidden";
this.resolveNode("ChangePAForm").presence = "visible";
//+ GENERATED - DO NOT EDIT (ID:C87B58DB-765D-426C-81BB-5A7ECFF42B63 CRC:2949030955)
//+ Type: Action
//+ Result4: SetPresence("$Node5","hidden")
//+ Result3: SetPresence("$Node4","hidden")
//+ Result2: SetPresence("$Node3","hidden")
//+ Result1: SetPresence("$Node2","visible")
//+ Node5: form1[0].ChangePAForm[0]
//+ Node4: form1[0].Non-PAForm[0]
//+ Node3: form1[0].DeletePAForm[0]
//+ Node2: form1[0].PAForm[0]
//+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
//+ Condition1: ListField("$Node1","textselected","CREATE NEW PA")
//+ ActionName: DropDown.change.NewPA
if ($.boundItem(xfa.event.newText) == "CREATE NEW PA") {
this.resolveNode("PAForm").presence = "visible";
this.resolveNode("DeletePAForm").presence = "hidden";
this.resolveNode("Non-PAForm").presence = "hidden";
this.resolveNode("ChangePAForm").presence = "hidden";

You should post this question in the LiveCycle Designer forum here. This forum is for forms created in Acrobat (Acroforms).

Error Message: Invalid relation attribute on pageSet xfa

Hi,
Searching through the forums and on the net, I cannot seem to locate an answer to this problem so I'm trying here...
I've developed a form that many folks are using without any issues. However, I do have a small number of users that get the following error message when opening the form.
Error Message: Invalid relation attribute on pageSet xfa[0].template[0].form1[0].#pageSet[0]
This error only appears to come up if they are using Adobe Acrobat Pro Version 8. No issues on versions 9 or 10 (X). The form is suppose to be compatible back to version 7.
My main form is called (form1). Then there are 4 major sub forms under (form1), The top drop down (on the MasterPage1) hides or displays one of the major sub forms based on user selection.
I have a hunch that something with the generated code not jiving well with Acrobat 8.
Here's a snippet of the code if you'd like to look through it.
form1.#pageSet[0].MasterPage1.FormActionDropDown::change - (JavaScript, client)
//+ GENERATED - DO NOT EDIT (ID:D2FF16C4-6D1F-45D4-ACB7-0DB7CE14229F CRC:3650232787)
//+ Type: Action
//+ Result4: SetPresence("$Node5","hidden")
//+ Result3: SetPresence("$Node4","visible")
//+ Result2: SetPresence("$Node3","hidden")
//+ Result1: SetPresence("$Node2","hidden")
//+ Node5: form1[0].ChangePAForm[0]
//+ Node4: form1[0].Non-PAForm[0]
//+ Node3: form1[0].DeletePAForm[0]
//+ Node2: form1[0].PAForm[0]
//+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
//+ Condition1: ListField("$Node1","textselected","ADD NON-PA User")
//+ ActionName: DropDown.change.NonPA
if ($.boundItem(xfa.event.newText) == "ADD NON-PA User") {
this.resolveNode("PAForm").presence = "hidden";
this.resolveNode("DeletePAForm").presence = "hidden";
this.resolveNode("Non-PAForm").presence = "visible";
this.resolveNode("ChangePAForm").presence = "hidden";
//+ GENERATED - DO NOT EDIT (ID:662A28BD-A30A-4E6D-92CD-6FF22B0EFB5D CRC:2945493746)
//+ Type: Action
//+ Result4: SetPresence("$Node5","hidden")
//+ Result3: SetPresence("$Node4","hidden")
//+ Result2: SetPresence("$Node3","visible")
//+ Result1: SetPresence("$Node2","hidden")
//+ Node5: form1[0].ChangePAForm[0]
//+ Node4: form1[0].Non-PAForm[0]
//+ Node3: form1[0].DeletePAForm[0]
//+ Node2: form1[0].PAForm[0]
//+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
//+ Condition1: ListField("$Node1","textselected","DELETE EXISTING PA")
//+ ActionName: DropDown.change.DeletePA
if ($.boundItem(xfa.event.newText) == "DELETE EXISTING PA") {
this.resolveNode("PAForm").presence = "hidden";
this.resolveNode("DeletePAForm").presence = "visible";
this.resolveNode("Non-PAForm").presence = "hidden";
this.resolveNode("ChangePAForm").presence = "hidden";
//+ GENERATED - DO NOT EDIT (ID:66B7091F-75C5-4A73-8ACA-885AE42D0308 CRC:2169512649)
//+ Type: Action
//+ Result4: SetPresence("$Node5","visible")
//+ Result3: SetPresence("$Node4","hidden")
//+ Result2: SetPresence("$Node3","hidden")
//+ Result1: SetPresence("$Node2","hidden")
//+ Node5: form1[0].ChangePAForm[0]
//+ Node4: form1[0].Non-PAForm[0]
//+ Node3: form1[0].DeletePAForm[0]
//+ Node2: form1[0].PAForm[0]
//+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
//+ Condition1: ListField("$Node1","textselected","CHANGE / MODIFY EXISTING PA")
//+ ActionName: DropDown.change.ChangePa
if ($.boundItem(xfa.event.newText) == "CHANGE / MODIFY EXISTING PA") {
this.resolveNode("PAForm").presence = "hidden";
this.resolveNode("DeletePAForm").presence = "hidden";
this.resolveNode("Non-PAForm").presence = "hidden";
this.resolveNode("ChangePAForm").presence = "visible";
//+ GENERATED - DO NOT EDIT (ID:C87B58DB-765D-426C-81BB-5A7ECFF42B63 CRC:2949030955)
//+ Type: Action
//+ Result4: SetPresence("$Node5","hidden")
//+ Result3: SetPresence("$Node4","hidden")
//+ Result2: SetPresence("$Node3","hidden")
//+ Result1: SetPresence("$Node2","visible")
//+ Node5: form1[0].ChangePAForm[0]
//+ Node4: form1[0].Non-PAForm[0]
//+ Node3: form1[0].DeletePAForm[0]
//+ Node2: form1[0].PAForm[0]
//+ Node1: form1[0].#pageSet[0].MasterPage1[0].FormActionDropDown[0]
//+ Condition1: ListField("$Node1","textselected","CREATE NEW PA")
//+ ActionName: DropDown.change.NewPA
if ($.boundItem(xfa.event.newText) == "CREATE NEW PA") {
this.resolveNode("PAForm").presence = "visible";
this.resolveNode("DeletePAForm").presence = "hidden";
this.resolveNode("Non-PAForm").presence = "hidden";
this.resolveNode("ChangePAForm").presence = "hidden";

You should post this question in the LiveCycle Designer forum here. This forum is for forms created in Acrobat (Acroforms).

Syntax error in profile relation while retreiving configuration parameters

Trying to get our Directory Services properly functioning after an IP change. Running
# kadmin.local -q listprincs
yesterday revealed that all service principals weren't set up properly. Dig dig dig... found that I might (since this server was originally 10.3--now it's 10.4.4) try
# slapconfig -kerberize diradmin
That pointed me in the direction of using Workgroup Manager to fix a couple things with the KerberosClient record for the server. Did that. Reran the command. It complained about an improperly formatted configuration file because it wiped the contents of edu.mit.Kerberos (took out the DNS bits). Then ran
# kerberosautoconfig -u
which resulted in
MergeLoggingInfo: creating default logging info
At this point, edu.mit.Kerberos looked good. Then I tried
# /usr/sbin/kdcsetup -f /LDAPv3/127.0.0.1 -w -a diradmin -p ** -v 1 REALM
which resulted in
Contacting the Directory Server
Authenticating to the Directory Server
Creating Kerberos directory
Creating KDC Config File
Creating Admin ACL File
Creating Kerberos Master Key
Creating Kerberos Database
Syntax error in profile relation while retreiving configuration parameters
SendInteractiveCommand: failed to get pattern
Creating Kerberos Admin user
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
Adding kerberos auth authority to admin user
Creating keytab for the admin tools
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
Adding KDC & kadmind to launchd
Adding the new KDC into the KerberosClient config record
edu.mit.kadmind: Already loaded
com.apple.kdcmond: Already loaded
Finished
Now when I try
# kadmin.local -q listprincs
I get
Authenticating as principal root/admin@REALM with password.
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
And now I'm getting this in kdc.log
Feb 07 09:41:26 od.master.fqdn krb5kdc[21234](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) xx.xx.xx.xx: LOOKINGUPCLIENT: diradmin@REALM for krbtgt/REALM@REALM, Database is locked or in use--try again later
Feb 07 09:41:26 od.master.fqdn krb5kdc[21234](info): DISPATCH: repeated (retransmitted?) request from xx.xx.xx.xx, resending previous response
Help!
Thanks,
Rich
ps. The typo in the error message is MIT's, not mine. I guess their engineering departments are better than their English department.
Xserve G5 Mac OS X (10.4.4)

Look at the two config files:
/Library/Preferences/edu.mit.Kerberos
/var/db/krb5kdc/kdc.log
the Database is locked or in use message is due to a missing lock file.
Look in /var/db/krb5kdc/ for principal.kadm5.lock
Hope this gets you started
- Leland

Creating a Relation between two Blocks - the Join Condition [SOLVED]

Hi. I'm trying to create a Relation between my TTMS_Audit table and my Bundle_Exceptions table. This is the join condition:
ttms_audit.primary_key_values = bundle_exceptions.project_cd||','||bundle_exceptions.bundle||','||bundle_exceptions.exception_cd
And I get the following error:
FRM-15004: Error while parsing join condition
Does anyone know if my concatenated values in the Join Condition are allowed? Can I even do this? Is there a logical work around?

Got it.
I first created the concatenated values as a non-base table item on my form:
:NBT_PRIMARY_KEY_VALUES := :bundle_exceptions.project_cd||','||:bundle_exceptions.bundle||','||:bundle_exceptions.exception_cd;
Then my join condition simply became:
ttms_audit.primary_key_values = bundle_exceptions.nbt_primary_key_values

Error # 3021 - Invalid Relation. --- MS Access to Oracle APEX

Hello everybody.
I have 3 years working with Oracle APEX and now I have the need to migrate an Access database to Oracle and APEX.
I have:
- MS Access 2003 database
- Oracle SQL Developer 3.0.04.34
- Oracle 10g Database
I will try to provide all the relevant information.
I used the Access Exporter for Access 2003 tool from Oracle SQL Developer to creat both .xml (for SQL Dev) file and .sql file (for APEX) but the process show me an error mesassge that said: "Error # 3021 - Invalid Relation. No current record".
I read in OTN forum that it was because the migration tool can not access the system tables and that I need to modify permisions to allow "Read Data". I did this process and I was able to create .xml file, however if I chose Application Express to create .sql file or the option to create both files the same error shows.
I have been reading in this forum but didn't find a way to solve it.
Does any body knows how to solve this issue?
Any help is appreciated.
Thanks in advance for your help.

Hello,
I can't reproduce your issue.
Have you double-checked that the tables MSysAccessObjects, MSysACEs, MSysObjects, MSysQueries and MSysRelationships are visible and that the Admin user has at least Read Design and Read Data permission on those tables?
If that is the case, and the problem still happens, and you are able to give a copy of your .mdb file to Oracle, then I suggest to open a Service Request with Oracle Support so that the issue can be investigated.
Regards
Wolfgang

Errore creating presentations

Hi,
after having created a relational schema and OLAP objects (cube,dim,measures) I try to create a presentation whit BIBeans on that schema but i get this error:
BIB-9509 Oracle OLAP non ha creato il cursore
oracle.express.itl.util.OlapiException: ORA-00600 codice errore INT.,argom:[17099],[],[],[],[],[],[]
ORA-00600:codice errore INTO. argom.:[KGHALO2],[0x0],[],[],[],[],[]
ORA-06512: a "SYS.GENDEFINITIONMANAGERINTERFACE",line 0
ORA-06512: a line 1
this error appears only if the dimensions have more than 2 levels...if they have the hierarchy with 1 or 2 levels everything is ok
Someone can help me?
thanxs in advance

Look at Keynote in the AppStore.

Error creating graph,crosstab,table...everything

after having create a relational schema and OLAP objects (cube,dim,measures) I try to create a presentation on that schema but i have this error:
BIB-9509 Oracle OLAP non ha creato il cursore
oracle.express.itl.util.OlapiException: ORA-00600 codice errore INT.,argom:[17099],[],[],[],[],[],[]
ORA-00600:codice errore INTO. argom.:[KGHALO2],[0x0],[],[],[],[],[]
ORA-06512: a "SYS.GENDEFINITIONMANAGERINTERFACE",line 0
ORA-06512: a line 1
Someone can help me?
thanxs in advance

hi
the "ora-00600", which is part of your trace snipplet is usually a sign that something has gone wrong on the server side.
i think it is best to open up a tar, because the tar analyst can brief you on the details (the "arguments" after the ora-600 message)
regards,
thomas

Creating a Relation in Forms

I'm trying to create a relation on an existing block (block1) to a new block that I've created (block2) which has a foreign key to block1. Now if I were to open up a blank new form and do this, it works fine, but since this is an existing form with several other child blocks with their own relations, I can't seem to do it. The error I get is below:
FRM-15004: Error while parsing join condition
The join condition is correct, but I'm still clueless as to what it could be.
Any clues?

Giovanni,
the way you do this is as follows
1. In Forms, navigate to the "master" block and select the Relations node
2. Create new relation by clicking the green cross in the leftside iconbar
3. Select the detail block
4. Define join as <block>.<item>=<block2>.<item>
This should do it
Frank

Failure: Error creating DaemonSession thread

Hi All,
I am getting failure: Error creating DaemonSession thread errior when I start the web-server instance as follows
bash-3.00$ ./start
Sun ONE Web Server 6.1SP2 B04/07/2004 17:28
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.1.05] from [Hewle
tt-Packard Company]
info: WEB0100: Loading web module in virtual server [https-myWebServer] at [/sea
rch]
info: HTTP3072: [LS ls1] http://hpux-lab:8000 ready to accept requests
failure: Error creating DaemonSession thread
startup: server started successfully
bash-3.00$
Please reply with a solution

This was related to kernel level settings
The attribute max_thread_proc was set to 64 which was not enough. So increase that to 2048 and the Web-Server Instance wil start.

Error: Create Binary Relation: INTERNAL_ERROR ??

Similar Messages

Maybe you are looking for