Error creating communication to SAP Service and Support.

Hi guru,
I hava an error while configuring in SAP solution manager 7.0 SP12  in SPRO transaction the "initial configuration part I " : the wizard configuration give me the error "Error creating communication to SAP Service and Support"
Error creating communication to SAP Service and Support
Message no. IMG_FASTCONF004
Diagnosis
Error creating communication to SAP Service and Support.
If i create the two RFC connection manually ( SAP-OSS and SAP-OSS-LIST-O01 ) then when I returned to SPRO to make the "initial configuration part II " this tell me that there is an error in basis configuration.
How can I solve this problem ?

markus , this is the first step i made after the installation of Sol Manager : this step have created the RFC   SAPOSS ( and is working ).
Ok - good.
I am speaking about solution manager , that in basic configuration try to create the other RFC.
yes - I´m aware of that.
I would update to the latest service pack first (SP17 or SP18) before you start with the confiugration. The new SPs have much better wizards. SP12 is pretty old already.
Markus

Similar Messages

  • I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

    I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • Vendor evaluation - General Service and support

    Hi
    What are the subcriteria that can be under General Service and support?
    How the scores are calculated for this?\
    If manual where can we enter the scores for these?
    Regards
    Soumen

    Hi,
    Following are the answers for your questions.
    What are the subcriteria that can be under General Service and support?
    Ans: - Subcriteria can be defined by us as per our requirement but SAP has provided following 2 Subcriteria;
    - Quality of service
    - Service timeliness
    How the scores are calculated for this?
    Ans: - For above 2 subcriteria, you can assign a scoring method as following;
    C Determination from quality rating of service
    D Determination from timeliness rating of service
    Config Path: - SPRO > MM > Puchasing > Vendor Evaluation > Define Criteria > Here maintain subcriteria for Service criteria and assign the scoring method
    At the time of processing Service Entry Sheet, under "Vendor evaln" Tab, you will have option to enter scores for the following subcriteria
    - Quality of service
    - Service timeliness
    Once you enter scores here, it will get calculated in ME61, if automatic evaluation is configured for above 2 subcriteras
    Config Path: - SPRO > MM > Puchasing > Vendor Evaluation > Define Purchasing Organization Data for Vendor Evaluation > Here for Service criteria and it's subcriteria do not activate manual maintenance indicator
    If manual where can we enter the scores for these?
    Ans: - And if you want to maintain values manually for Service criteria and subcriteria then activate the manual maintenance indicator in above config path and then maintain it duirng ME61 (Vendor Evaluation)

  • Unable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Plea

    nable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Please!

    Hi skydivingsnowman,
    I'm sorry you're having such trouble using the ExportPDF service. What browser are you using?
    Please try clearing your browser cache, or using a different browser (here's a list of supported browsers:   http://www.adobe.com/acom/systemreqs/.
    Please let me know if that works.
    Best,
    Sara

  • This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information.

    I am trying to update my Airport Extreme. I go into the Airport Utility and this is the message attached I get when clicking on it.
    "This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information." That;s it.
    I guess I can hard reset it, but this seems weird. Any advice would be nice.
    Thank you.

    Dear Bob, I have same problem:
    "This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support for more information."
    My MBAir is running OSX 10.9.3 and the AIrPort Extreme I'm trying to use is A1143.
    Thanks

  • Serial number not working in service and support coverage!?

    I am entering my hardware serial number into the service and support coverage box and it says that they have nothing on there records.
    Registered 4 months ago. anyone else have this problem?

    If you are having problems on Apple's registration website, call Apple Customer Relations - 1-800-767-2275.  You can check our coverage and/or register over the phone w/them. 

  • HT1998 How can I administer a Gen 1 Airport Express from Airport Utility 6.3.2 (OS 10.9). I can see the base station but get the message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more inform

    How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?

    Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
    You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC.

  • My serial number is C38JL043DTWD but lose from last 3 week and 28 October expire for service and support coverage how can I claim?

    My serial number is C38JL043DTWD but lose from last 3 week and 28 October expire for service and support coverage how can I claim?

    Sorry, but I don't understand your question. If you are questioning the stated expiration date of your warranty, when did you buy the iPhone and from what dealer? You may wish to post in your native language if you are uncomfortable posting in English.
    Regards.

  • HT4262 This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.

    In my Airport Utility a read the following message:
    This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." What do I have to do ?? I can use my airport.

    I assume that your MacBook Pro is running OS X Mountain Lion ... correct? If so, version 5.6 can run just fine on this version of OS X; it just can't be installed in the traditional way.
    Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
    If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
    Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
    Run Pacifist.
    Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
    The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
    Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
    You can now run the AirPort Utility from the Utilities folder.

  • HT1349 Do I only have a certain window of time to register my Apple Service and Support protection plan before it expires? I certainly hope not I paid for it and could never get the serial numbers for product & protection to sync together!

    Do I only have a certain window of time to register my Apple Service and Support protection plan before it expires? I certainly hope not I paid for it and could never get the serial numbers for product & protection to sync together!

    Normally must register an AppleCare plan before the original warranty on the Mac expires. If you have problems registering the AppleCare plan for your MacBook, call Apple tech support and ask to be connected to AppleCare Plan Adminstration.
    For future posts, please make sure you're in the most appropriate forum for the product or service you're asking about. You'll be most likely to get quick and accurate help that way.
    Regards.

  • "created by" in SAP transactions and CE BPM

    Dear all,
    In most of the transaction e.g. create Purchase Order - "created by" is field available in BAPI. In case of Investment approval processes "created by" is popultaed by the ID assigned to logical destination "BASIC" authorisation.
    How is this implemented, any guidline?
    If EP user creates transaction on SAP, how do we get report / analysis of EP user wise transaction and noty user specified in BASIS authorisation?
    how does licencing affects if we use BASIC authorisation?
    Ajay

    Hi
    How is this implemented, any guidline : CreatedBy,CreationDate ,Time.. these are some standard Business Attribute which is by default get assigned to BAPI ,EJB. other than our normal field which actually a key attribute for that implementation. We do not need to give any value/implementation for these attribute it take the data automatically from system .
    Hope it helps .
    Best Regards
    Satish Kumr

  • When I check for service and support coverage its show that my phone was replaced  but i just bought it, is that means its used phone and sold as new one again?

    when I check for service ans support coverage its show that my phone was replaced, but I just bought my iphone, is that means its used phone and sold as new one?

    http://discussions.apple.com/message/21753467#21753467

  • Service and Support

    Several months ago, we received three consecutive emails showing porn movie charges which were posted minutes apart from each other.  We immediately called customer service and were told that they would put a note and our account and for us to call when we received the bill and they would be credited to our account.  The bill came and we called and were told they were being deducted so we deducted them from our payment.  We received an email saying our account was overdue while we were out of the country.  When we got back we called and were told that they have a record of our talking to two customer service representatives but there was no record of their telling us they would credit the charges. We were told that they will not credit the charges. We asked for the full detail of the charges showing what was watched and the duration of the viewing so that we could match it up with our initial notification of charge emails.  The representative said he would send us the information.  He sent us nothing.  I AM DISGUSTED WITH BEING LIED TO BY YOUR CUSTOMER SERVICE REPRESENTATIVES.  WE HAD TWO REPRESENTATIVES TELL US THEY WERE CREDITING OUR ACCOUNT OBVIOUSLY ONLY TO GET RID OF THE CALL.  WE DO SCROLL THE CHANNELS BUT NEVER USE PAY PER VIEW.  THE FACT THAT THESE ARE THREE CHARGES MADE IN A MATTER OF MINUTES SHOULD SHOW THAT IT IS A MISTAKE.  IT SHOULD WORK THE SAME AS WHEN YOU GO TO HBO AND HAVE NOT SUBSCRIBED; IT SHOULD REQUIRE FURTHER ACTION TO INCUR CHARGES.  WE HAVE NOW REMOVED ALL PAY PER VIEW PURCHASE CAPABILITY FROM OUR SYSTEM.  THE WAY IT WAS YOUR TODDLER COULD HIT THE REMOTE AND INCUR CHARGES.

    I'm sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.

  • Error in E-rec web Service and BSP

    Hi Folks
    We are facing an issue with Requisition Management in E-rec. A workflow is triggered for requisition management and goes to approver. The workitem does not appear in the UWL of the user however when we monitor the log, it shows the workitem is with approver and without any error.
    Our problem is it does not show the workitem in the approver's UWL and when we test the approval serivce and handler service in SICF, it gives us the following message
    1.Service Name : wshandler (REQUEST HANDLER FOR WEB SERVICES)
    Error in Web service execution
    The launch handler was called with an incomplete parameter list
    2.Service name :  hrrcf_approval (Recruiter: Approval of Status Change)
    Error message : Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    BSP Exception: Das Objekt default.htm in der URL /sap/bc/bsp/sap/hrrcf_approval/default.htm?sap-client=100&sap-sessioncmd=open ist nicht gültig.
    Please guide us, how to fix.
    Regards
    Netweaver team

    Hi,  Were you able to resolve this issue?
    IF not then please go to transaction wf_handcust and maintain the entries under Launch Handler, Callback Handler and callback Dialog. I had the same issue and your's was the only related message I could search in SDN so thought of sharing the solution.
    Regards,
    VInay

  • Creating a Simple Web Service and Client with JAX-WS

    I downloaded javaeetutorial5 tutorial from this URL.
    https://sdlc1a.sun.com/ECom/EComActionServlet;jsessionid=5874F5CFDFC12A3F5217CEA1ED76E76C
    And followed the steps to create the web service as mentioned here.
    http://java.sun.com/javaee/5/docs/tutorial/doc/JAXWS3.html#wp79980
    But I couldn't make it to run using my netbeans IDE 5.5.
    Its giving a deployment error.
    init:
    deps-module-jar:
    deps-ear-jar:
    deps-jar:
    library-inclusion-in-archive:
    library-inclusion-in-manifest:
    compile:
    compile-jsps:
    do-dist:
    dist:
    In-place deployment at D:\NetBeans\javaeetutorial5\examples\jaxws\helloservice\build\web
    Start registering the project's server resources
    Finished registering server resources
    moduleID=helloservice
    deployment started : 0%
    Deploying application in domain failed; com.sun.tools.apt.Main.process(Lcom/sun/mirror/apt/AnnotationProcessorFactory;[Ljava/lang/String;)I
    D:\NetBeans\javaeetutorial5\examples\jaxws\helloservice\nbproject\build-impl.xml:440: Deployment error:
    The module has not been deployed.
    See the server log for details.
    BUILD FAILED (total time: 3 seconds)Is it a bug in netbeans 5.5 because i made this as it mentioned in the tutorial.

    I am getting the same error as describes in this thread.
    http://forum.java.sun.com/thread.jspa?threadID=715624&messageID=4152590
    How can i solve this error.
    Message was edited by:
    Ajaxrand

Maybe you are looking for