Error creating iPad mobile reports

I have a question specifically on creating mobile reports. I have searched as many places as I could find for this answer and have found nothing except ipad connection and mobile usage instructions. I must confess upfront that I am new to working with this system.
Background:
We have successfully connected to the iPad and I can see and download my reports. Per the instructions, the reports are in the Mobile category and show up correctly in the iPad app. I can open the reports, but that is where the issue starts. The server setup is BusinessObjects XI 3.1 SP4 and BusinessObjects Mobile SP4.
My understanding is that these reports are basic Web Intelligence reports that are sized for the iPad's screen. I am using InfoView to create these WebI reports through the browser-based Java GUI -- as the instructions suggest. The instructions suggest many design best-practices and suggest that pie charts and bar charts are available.
Problem
I have created the most basic report that contains only a table and a pie chart (I tried the bar chart too). When viewing this on the iPad, the table shows up formatted nicely but the pie chart has an error message in its place that says "This content is not supported".
i have taken the "Features Sample" report called "Formatted Report for Drill" and copied into the mobile folder. I appears on the iPad with tables shown nicely and all graphs replaced with the same "This content is not supported" error.
Can anyone tell me what I am doing wrong?
Thanks.

After posting the question, I found this document:
Link: [SAP BusinessObjects Mobile Release Notes|http://help.sap.com/businessobject/product_guides/boexir31SP4/en/400_mobile_for_iPad_rn_en.pdf]
which describes many unsupported features and partially explains the issues I'm seeing.
On some reports I can switch to simpler graphs (basic 2D pie, etc) and the graph will work on the iPad. But there are others where I cannot get any graph to work. I'm still working on that...

Similar Messages

USB error and iPad mobile cart.

I have a 15 inch MacBook Pro managing a iPad mobile cart of 30 iPads. When I plug the USB cord with all the iPads hooked up to it into my Mac an error message comes up saying my USB ports are drawing too much power and that they will be turned off temporarily. This doesn't make any sense because the iPads have their one power supply. I unplug my Mac and restart it and about five minutes later the error message comes up again when there isn't anything connected to the USB ports and its been sitting on my desk untouched. What might be happening?

I would seek support from the maker of the cart. Few visitors to this forum are likely to have experience with such a device.

Bugreport: creating a mobile Listview region results in error

Hi,
i'm on apex.oracle.com creating a mobile application. When creating a new region of type report -> Listview it results in an error if the query is too big (or returns too many columns).
The error is: Error during rendering of region "Add Javascript code for Plugins". ORA-06502: PL/SQL: numeric or value error: character string buffer too small
The query i used: SELECT * FROM APEX_APPLICATION_PAGE_ITEMS
brgds,
Peter
get Syntax Highlighting for the Application Builder: http://apex.oracle.com/pls/apex/f?p=APEX_DEVELOPER_ADDON:ABOUT:0:::::
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at and http://www.wirsindapex.at
Fantastic Plugins for APEX: http://www.tryfoexnow.com

Hi Peter,
I have filed bug 16396195 - ora-06502 raised when creating list view if sql returns too many column
for this issue.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Error creating mobile service.

I am unable to Create mobile service on my Azure portal.
Every time i try to create an app i get following Error:
RDFE: The upstream server reported that the resource was not found. If you contact a support representative please include this correlation identifier: a9a1e614-a69d-729d-9fc3-2c9e93a51057,
the time of error: 2015-03-03 19:36:01Z, and the error id: ZE9.

Microsoft? Can you please respond to this issue?
I am not able to create a mobile service....
There is someone else with the same problem:
http://stackoverflow.com/questions/28711434/can-not-create-a-mobil-in-azure-recieve-the-upstream-server-reported-that-the-re/28716442#28716442

Can not create a mobile Service RDFE: The upstream server reported that the resource was not found.

Hi,
I am trying to create a mobile service and no matter what I do I receive the attached error:
RDFE: The upstream server reported that the resource was not found.
What does this error mean and how do I resolve it.
I have created mobil services on this account a few days ago.. I deleted most of my azure resources and I am not sue I deleted one that is required for this

Thanks for reporting this problem. The Mobile Service team is looking into this, and we believe that we identified the issue. We are working on a fix now. I'll let you know when we've resolved the issue.

Error when attempting to create new Crystal Report against SAP BW

We're getting an error when attemptiing to create a new report using the SAP toolbar in CR:
"Failed to retrieve SSO2 logon ticket. Please contact your BW administrator".
Any ideas? We're able to run existing reports fine. Just can't create new ones using the toolbar.

Hi,
but you do realize that it is a pre-requisite ?
your BW system needs to be configured for reading and generating SSO token
Ingo

Creating a Linked Report in SC 2012 - Operations Manager fails with Error

Hello everyone,
I was trying to create a linked report based on an availability report recently. I found Emre Guclu's scom linked report creation guide here:
http://blogs.technet.com/b/emreguclu/archive/2011/10/13/using-linked-reports-in-scom-to-create-custom-availability-reports-for-specified-monitors.aspx
I go to SSRS web console and select a report (Which is Microsoft.SystemCenter.DataWarehouse.Availability in Microsoft.SystemCenter.Datawarehouse.Reports), select "Create a Linked Report" from context menu, select another location for storing the
report just like on this guide but i get an error rsWrongItemType with exact text:
"The operation you are attempting on item ' Microsoft.SystemCenter.Datawarehouse.Reports/ Microsoft.SystemCenter.Datawarehouse.Availability' is not allowed for this item type. rsWrongItemType"
Does anyone know why is this error happening and better how to fix this?
Below is the screenshot of SSRS.

Hi,
Please check the report path you have set, the location must specify the full report path, such as
/custom report folder/MyReport.
Alex Zhao
TechNet Community Support

Error in Creating a WebI Report on SAP Source using Rich client in BOxi 3.1

Hi
I tried to create a webi report using rich client on sap source. I get a error message " A Database error occured. the Database text is 'unable to connect to SAP BW server name and password is incorrect(repeat logon) (WIS 10901) .
SAP Integration kit installed
BO XI 3.1 is installed on windows server 2003
Application server - Tomcat 5.5 server.
Any configuration or sap files/folders should be added?
how can I move forward to solve it ?
Thanks!
J.M Raj

Hi
Ya I used SAP authentication - then also get same error.
Connections are created with username, password to access SAP Source
Thanks!
J>M>Raj
Edited by: John Milton on Jun 25, 2009 10:03 AM

Error creating Crystal Report using Stored Proc Universe

Hi,
I have created a stored procedure Universe, using the new feature available in XI R3.
This connects to an Oracle database, executing a PL/SQL procedure returning ref cursor.
I have created a WebI report using this Universe, which works fine and functions as expected.
So there are no problems with either my Oracle stored proc or the Universe.
However, I would like to create a Crystal report (2008) using the same Universe.
I can create the report ok - using the SP Universe.
When I attempt to refresh the data I get an error:
Failed to retrieve data from the database.
Details: ORA-06550: line 1, column 7:
PLS-00103: Encountered the symbol "." when expecting one of the following:
begin case declare etc etc
.................................My Procedure ...................
CREATE OR REPLACE PROCEDURE BIADM.Bo_Test_Report_R
(Deposit_Cursor IN OUT SYS_REFCURSOR)
IS
BEGIN
OPEN Deposit_Cursor FOR
SELECT DISTINCT foracid "A/C"
, acct_name "A/C Name", acct_opn_date "OP/Date", schm_code "SchmCode"
FROM gam@finrpt
WHERE acct_cls_flg ='N'
AND foracid ='2252020145001';
--AND cust_id ='CB2020145'
END Bo_Test_Report_R;
Please Give me solution as early as possible.
Masud Iqubal

Moved to Universe Design forum.

Issue with the report oracle.apps.xdo.XDOException:Error creating lock file

I am getting an error while submitting the XML publisher report in Betsy N0 instance.
Issue
Log :- Beginning post-processing of request 145458120 on node BETSYN0DB1 at 22-DEC-2011 05:28:26.
Post-processing of request 145458120 failed at 22-DEC-2011 05:28:28 with the error message: One or more post-processing actions failed. Consult the OPP service log for details
Output :- Blank Report
XML file :- XML file generated without any error
Output process:-
[12/23/11 4:28:10 AM] [1213640:RT145480622] Completed post-processing actions for request 145480622.
[12/23/11 5:16:01 AM] [OPPServiceThread1] Post-processing request 145481427.
[12/23/11 5:49:30 AM] [OPPServiceThread1] Post-processing request 145481923.
[12/23/11 5:49:30 AM] [1213640:RT145481923] Executing post-processing actions for request 145481923.
[12/23/11 5:49:30 AM] [1213640:RT145481923] Starting XML Publisher post-processing action.
[12/23/11 5:49:30 AM] [1213640:RT145481923]
Template code: XXWIP_WO_VLVS
Template app: XXWIP
Language: en
Territory: US
Output type: PDF
oracle.apps.xdo.XDOException: Error creating lock file
 at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
 at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
 at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
 at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
 at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[12/23/11 5:49:31 AM] [UNEXPECTED] [1213640:RT145481923] oracle.apps.xdo.XDOException: Error creating lock file
 at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
 at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
 at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
 at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
 at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
 at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
 at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[12/23/11 5:49:31 AM] [1213640:RT145481923] Completed post-processing actions for request 145481923.

The issue is fixed.
Our XML Publisher TMP is not defined, so it uses the APPLTMP used by concurrent manager. There is a folder xdofonts/<SID> in $APPLTMP. It contains the fonts used by XML publisher and on the of font file (.ttf) was 0 byte. We copied the ttf file from QA. And it started working.
Best practice is to define diffent TMP for concurrent managers and XML Publisher.
Cherrish Vaidiyan

Create a mobile application for view BW reports.

I want to create a mobile application with MDK for viewing BW reports. It is possible ?

Hello,
I have a similar kind of requirement here.
I need to show BW data on wireless device...via Portal.
This BW data is a query, which is created using WAD.
In normal case, we just use the SAP BW Report iView, stick the Bex query in it and its all done. But in this case....how am to go about this...?
Ive read about Mobile WebDynpro but want to know that....Mobile Web Dynpro is an oline approach, does it mean that user will be able to drill down from the Bex query??
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Error While creating a Mobile UI Component

Hi Friends ,
While I am trying to crete a new Mobile UI component for an application , In the Select Software component dialog I am getting the below shown Error.
Software Component does not support selected Development Component Type. Required DCs are located in an SC that is not visible from the selected SC
Earlier when I created a Mobile UI component the error didn't come but I deleted the Mobile UI component and after that when I created a new Mobile UI component the error started coming.
I have already read the thread.
Software Component does not support selected Development Component Type...
Software Component does not support this Development Component Type.
But couldn't understand.
Please Suggest.
Regards
Nitesh

Hi Vidyadhar/David,
 
Thanks for your reply . I tried the steps suggested by u . Now I am getting a new error . The log I have pasted below. 
Development Component Build (2009-11-03 12:45:30 GMT+05:30 (IST)) 
Component name: order_ui 
Component vendor: demo.sap.com 
SC compartment: MyComponents 
Configuration: LocalDevelopment 
Location: localDevelopment 
Source code location: nharit@**** 
DC root folder: C:\Documents and Settings\nharit\workspace.jdi\LocalDevelopment\DCs\demo.sap.com\order_ui\_comp\ 
DC type: Mobile Applications for Handhelds 
DC subtype: Mobile UI Component 
Host: ******* 
DC Model check: 
 DC is available locally 
 validating dependency to build plugin "sap.com/tc/bi/bp/oca/cfs" 
 validating dependency to used DC "demo.sap.com/order_sv" 
 validating dependency to public part "interface" of DC "demo.sap.com/order_sv" 
 validating dependency to public part "default" of DC "sap.com/tc/cmi" 
 validating dependency to public part "generation" of DC "sap.com/tc/mobile/cfs/api" 
 validating dependency to public part "api" of DC "sap.com/tc/mobile/oca/api" 
 validating dependency to public part "runtime" of DC "sap.com/tc/mobile/wdlite/facade" 
 DC model check OK 
Start build plugin: 
 using build plugin: sap.com/tc/bi/bp/oca/cfs 
 starting build plugin from : C:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.tc.ap_2.0.1.091015093457 \comp\XOCA\DCs\sap.com\tc\bi\bp\oca\cfs\_comp\gen\default\public\def\ 
Build Plugin 'OCA Build plugin CFS', Version 7.10 SP 3 (710_VAL_REL, built on 2007-12-25 01:27:31 +0100, CL285332) 
 development component: order_ui (demo.sap.com) 
 software component: MyComponents (demo.sap.com) 
 location: localDevelopment 
 type: Mobile Applications for Handhelds, subtype Mobile UI Component 
 build variant: default 
 source location: nharit@****** 
 output location: C:\Documents and Settings\nharit\workspace.jdi\LocalDevelopment\t2 \44750CB853388BD98C14319CE2D2842A\default
 generation folder: C:\Documents and Settings\nharit\workspace.jdi\LocalDevelopment\t\44750CB853388BD98C14319CE2D2842A 
 plugin start time: 2009-11-03 12:45:31 GMT+05:30 (IST) 
 Java VM: Java HotSpot(TM) Client VM, 14.2-b01 (Sun Microsystems Inc.) 
General options: 
convert *.xlf to *.properties: yes 
include sources for debugging: yes 
Warning: Source folder "META-INF" exists but is empty and will be ignored. 
Checking path lengths for sources 
Path length checks finished in 0.016 seconds 
Preparing data context.. 
No public part descriptor found in C:\Documents and Settings\nharit\workspace.jdi\LocalDevelopment\FRAMEWORK\sap.com\tc\cmi\_comp\gen\default\public\default, using legacy mode.
No public part descriptor found for component "tc/mobile/wdlite/facade" (vendor "sap.com"), public part "runtime", using legacy mode. 
Dependency validation check 
 Development Component Dependencies 
 MCD name: order_sv MCD version: 1.0(order_sv(interface)) 
 Dependencies in mcd.xml: 
 
Comparing data in MCD and DPI files. 
Error: com.sap.tc.mobile.dt.oca.bp.exception.OCABuildPluginException: Validation of MCD file failed. Description of component 'order_sv' version '1.0' not found in MCD file. Please update the MCD file by calling the option 'Update deployment descriptors' in the components context menu. 
 at com.sap.tc.mobile.dt.oca.bp.impl.cfs.provider.MCDDescription.checkComponentDependency (MCDDescription.java:157) 
 at com.sap.tc.mobile.dt.oca.bp.impl.cfs.provider.CFSDataContextProvider.checkMCDDependencies (CFSDataContextProvider.java:156) 
 at com.sap.tc.mobile.dt.oca.bp.impl.cfs.provider.CFSDataContextProvider.execute (CFSDataContextProvider.java:126) 
 at com.sap.tc.buildplugin.PrepareContextBuildStep.prepareTechnologySpecificData (PrepareContextBuildStep.java:186) 
 at com.sap.tc.buildplugin.PrepareContextBuildStep.setupBuildFileCreatorContext(PrepareContextBuildStep.java:95) 
 at com.sap.tc.buildplugin.PrepareContextBuildStep.execute(PrepareContextBuildStep.java:56) 
 at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196) 
 at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168) 
 at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66) 
 at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48) 
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) 
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) 
 at java.lang.reflect.Method.invoke(Method.java:597) 
 at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:400) 
 at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:149) 
 at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:87) 
 at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59) 
 at com.sap.tc.devconf.impl.DCProxyMake.make(DCProxyMake.java:260) 
 at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1574) 
 at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:4537) 
 at com.sap.ide.dii05.lib.internal.commands.dc.BuildJob.build(BuildJob.java:370) 
 at com.sap.ide.dii05.lib.internal.commands.dc.BuildJob.doInWorkerThread(BuildJob.java:187) 
 at com.sap.ide.dii05.util.api.job.JdiJob$1.doInWorkerThread(JdiJob.java:75) 
 at com.sap.ide.dii05.util.internal.job.InternalJdiJob$3$1.run(InternalJdiJob.java:224) 
 at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1797) 
 at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1779) 
 at com.sap.ide.dii05.util.internal.job.InternalJdiJob$3.run(InternalJdiJob.java:233) 
 at com.sap.ide.dii05.util.internal.job.BusyBackgroundIndicator.showWhile(BusyBackgroundIndicator.java:74) 
 at com.sap.ide.dii05.util.internal.job.InternalJdiJob.internalRun(InternalJdiJob.java:214) 
 at com.sap.ide.dii05.util.internal.job.InternalDiiJob.run(InternalDiiJob.java:275) 
 at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) 
Error: Build stopped due to an error: Validation of MCD file failed. Description of component 'order_sv' version '1.0' not found in MCD file. Please update the MCD file by calling the option 'Update deployment descriptors' in the components context menu. 
Error: Build stopped due to an error: Validation of MCD file failed. Description of component 'order_sv' version '1.0' not found in MCD file. Please update the MCD file by calling the option 'Update deployment descriptors' in the components context menu. 
Build plugin finished at 2009-11-03 12:45:31 GMT+05:30 (IST) 
Total build plugin runtime: 0.469 seconds 
Build finished with ERROR 
==== Post-Processing ==== started at 2009-11-03 12:45:31.618 IST 
Copy the build logs 
from: C:\Documents and Settings\nharit\workspace.jdi\LocalDevelopment\t2 \44750CB853388BD98C14319CE2D2842A\default\logs\ 
to: C:\Documents and Settings\nharit\workspace.jdi\LocalDevelopment\DCs\demo.sap.com\order_ui\_comp\gen\default\logs\ 
Build results in folder C:\Documents and Settings\nharit\workspace.jdi\LocalDevelopment\DCs\demo.sap.com\order_ui\_comp\gen\default\ remain unchanged. 
 
Please Suggest. 
 
It will be great Help. 
 
Regards 
Nitesh

Error while creating Power View Report via BISM connection.

I am able to create a PowerView Report using Microsoft BI Semantic Model connection without any problem. Everything works from home. But when I try to create Power View report using a BISM connection, I am running into errors. I've verified all permissions
are all set correctly and SQL Browser service is running as well. Please see below error message. Greatly appreciate any pointers.
Detailed error message
Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'TemporaryDataSource'. ---> Microsoft.AnalysisServices.AdomdClient.AdomdConnectionException:
A connection cannot be made to redirector. Ensure that 'SQL Browser' service is running. ---> System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was found at System.Net.Sockets.TcpClient..ctor(String
hostname, Int32 port) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) --- End of inner exception stack trace --- at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo
connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean&
isSessionTokenNeeded) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetInstancePort(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenConnection(ConnectionInfo
connectionInfo, Boolean& isSessionTokenNeeded) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Connect(Boolean
toIXMLA) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.ConnectToXMLA(Boolean createSession, Boolean isHTTP) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.Open() at Microsoft.ReportingServices.DataExtensions.AdoMdConnectionBase.InternalOpen()
at Microsoft.ReportingServices.Diagnostics.DataExtensionConnectionBase.OpenConnection(IProcessingDataSource dataSourceObj, DataSourceInfo dataSourceInfo, IDbConnection conn) --- End of inner exception stack trace ---;

So , have you actually came to a conclusion about the problem. I have a similar one in my environment.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus
xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">Erro
ao carregar o modelo para o item ou a fonte de dados 'http://gasmignethml/BICenter/Galeria%20PowerPivot/BIGASMIG.bism'. Verifique se as informações de conexão estão corretas e se você tem permissões para acessar a fonte de dados.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.5058.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Erro ao carregar o modelo para o item ou a fonte de dados 'http://gasmignethml/BICenter/Galeria%20PowerPivot/BIGASMIG.bism'.
Verifique se as informações de conexão estão corretas e se você tem permissões para acessar a fonte de dados.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Não é possível criar uma conexão com a fonte de dados 'TemporaryDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.AdomdClient</Source><Message>A
connection cannot be made to redirector. Ensure that 'SQL Browser' service is running.</Message><MoreInformation><Source>System</Source><Message>The
requested name is valid, but no data of the requested type was found</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Any help will be very welcome.
Thanks in advance
abcoura | osmanos.org

Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

i am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name       Type
appid        String
location    String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name       Path       Type
Url          /text()      String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.

i exported the application from apex.oracle.com and imported it to our environment
import went fine, but when I ran the IR page I got
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well

APEX:Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

I am using Apex 4.2.2.00.11
am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name       Type
appid        String
location    String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name       Path       Type
Url          /text()      String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.

336554,
Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
57434

Error creating iPad mobile reports

Similar Messages

Maybe you are looking for