ERROR- "Creating Logical system through BD54"

Hi,
I need to create a new client as a copy of an existing client. Before that I need to create a Logical System through DB54. But when I am executing the T-Code BD54 the system gives an information popup saying u201CChanges to Repository or cross-client Customizing are not permittedu201D and there is no new entry tab in BD54. What can be the solution?

Hi,
Now when i am clicking on start immediately/schedule as backgroung job the following error appears. I have created the RFC also and its working properly. 600 is the newly created client.
RFC destination for client copy in systems with Financials Basis
(FINBASIS) component.
The system could not find any suitable RFC destination for processing
for client 001.
This note also appears if an RFC destination was found but this does not
work.
o   RFC destination: FINB_TR_DEST
o   Error text:
Proceed as follows to eliminate this error:
1.  Start the wizard to create a new RFC connection
or perform the following steps manually:
1.  Create an RFC destination with the target ZK>source client of client
What can be the solution?

Similar Messages

  • Post installation error "Local logical system is not defined"

    Hello everyone,
    I freshly installed the latest SAP NetWeaver 7.01 ABAP Trial from scratch and like to configure ALE.
    I followed thew steps of http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    (ALE Quick Start) but cannot get through the following step on page 12:
    From the R/3 Implementation Guide screen in TA SALE
      choose Basis
        Application Link Enabling (ALE)
          Modeling and Implementing Business Processes
            Maintain Distribution Model and Distribute Views
    Clicking on Maintain Distribution Model or using TA BD87, I immedeately get the following error:
    The initialization of the logical system has failed.
    With TA BD64 the error: Local logical system is not defined arises. I also looked at
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi,
    /people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1 and
    /people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide describing the same actions
    to find an explanation, but without success
    I assume, the error does not occur because the trial version does not support it, but
    because of other post installation activities that must be done.
    I already created two logical systems and assigned them to newly created clients 100 and 200,
    but this did not have any impact on BD87 and BD64 as i was hoping.
    Does somebody know what to do here?
    Thanks in advance and kind regards,
    Andreas

    Hi Naveed,
    i made the following settings:
    SCC4: new entries created
    100     Sending System
    200     Receiving System
    SM59: new ABAP type 3 connections:
    RFC_DEST_LS_100
    RFC_DEST_LS_200
    - Tab Logon & Security Logon user: current user (bcuser client 001)
    Connection test is successful
    - Technical Settings: target host: localhost
    SALE: new logical systems created
    LS_100
    LS_200
    SCC4:
    double click on 100 Sending System   configured with logical system LS_100
    double click on 200 Receiving System configured with logical system LS_200
    kind regards
    Andreas

  • How to create Logical System for ALE?

    Hi All,
       I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing".  Help with proper documentation.
    Thanks in Advance.

    Hi,
    what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
    Here i am giving link go through that and do practice,
    http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
    http://www.****************/Tutorials/ALE/ALEMainPage.htm
    Reward if it useful
    lakshmi.

  • SAP* or DDIC being unable to create logical system in SAP PI 7.1

    greetings !
    I am not a basis person.
    I had freshly installed PI 7.1.  I was finding that I am being unable to create new logical systems . I tried logging to both clients 000 and 001 using sap* , ddic , and pisuper . pisuper does not even have the authorization to execute SALE . SAP* and DDIC can excecute SALE but unable to create or assign clients.
    I reinstalled my system from scratch thinking i must have errored on something, as creating clients is a very simple task. but even the new PI 7.1 gives me the same problem.
    is something wrong with my installation , or there are additional roles/authrizations I need to assign to a user.
    regards
    rishi

    Besides PISUPER other users are also created some of the are PIAFUSER, PIDIRUSER, PIRWBUSER etc. Every user has a specific purpose in a PI system. For activities like creating logical system etc. own id's should be used.
    There are couple of guides out there which explains in detail the purpose of all the users in PI system.
    Hope this helps.
    Thanks,
    Naveed

  • How to create logical system

    Hi,
    How to create logical system.
    Please help me with the steps for logical system creation in R3 system.
    Thanks,
    Kelly

    Hi,
    First make your client modifiable, then follow the below procedure.
    Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
    For more information use below link.
    http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
    Thanks,
    Mano

  • Error: local logical system is not definied

    Hallo,
    when I start transaction bd64, I got following error:
    "local logical system is not definied"
    Can anybody help me please?
    Regards
    Stefan

    goto SALE transaction and create logical system for your own system(System in which you are working)
    Path
    Idoc Interface/APllication Link Enabling->Logical Systems->Define Logical systems
    Regards,
    ravi
    Edited by: Ravi Kanth Talagana on Jun 30, 2008 3:57 PM

  • Deleting Logical system from BD54

    Hi ,
    I have created 2 logical systems in BD54. now I want to delete that logical systems. When I am trying to delete that logical systems..i am getting the msg " Logical Systems <Logical System Name> must not be deleted".
    Whats the problem nd how to delete it.

    Hi Vijay,
    Goto-BD54--> Click on the Position -->provide you logical system name..Then press enter
    Select logical system which you want to delete----> press Minus symbol in the application tool bar --> enter.
    Thanks,
    Nelson

  • Why do we create logical systems in ALE?

    Hi All,
            i got this question in interview.
        Why do we create logical systems in ALE?
    Thanks & Regards
    suresh

    Hi
    In addition to above .
    A logical system is used to identify an individual client in a system, for ALE communication between SAP systems. That's why you see a field for 'logical system' in the client master data in SCC4 (table T000).
    /people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
    http://help.sap.com/saphelp_nw04/helpdata/en/b5/1d733b73a8f706e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/69/c24ca94ba111d189750000e8322d00/content.htm
    http://72.14.203.104/search?q=cache:J-uDLyT0w54J:www.topxml.com/biztalkutilities/walkthroughs/SAP%2520Configuration.pdfwhatislogicalsystems+(SAP)&hl=en&gl=in&ct=clnk&cd=5
    http://help.sap.com/saphelp_nw04/helpdata/en/78/217dc151ce11d189570000e829fbbd/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/d7/9c73631d6c11d2a56e0060087832f8/content.htm
    This guide is really good shows step by step procedure.
    http://72.14.203.104/search?q=cache:Xyl0zxpyEXsJ:www.sappoint.com/abap/ale.pdfLogicalsystem(ALE)&hl=en&gl=in&ct=clnk&cd=9
    for one client config
    http://www.sappro.com/downloads/OneClientDistribution.pdf#search=%22Logical%20system(ALE)%22
    Please reward for the same.

  • Create Logical System in R/3 system

    Hi all,
       I am  trying to define logical system for xMII server in R/3 system using SALE transaction. But the logical system for xMII server doesn't already exist. So I have chosen to create one. Seems there is format like <sys_id>'CLNT'<client>.
    1) How to create logical system for xMII server in this format?
    2) How does R/3 know in which host xMII server is running? Do we specify that somewhere? Is there any other configurations for linking xMII host and logical system?
    I am new to xMII and so not aware of the steps. Please help me out.
    Points will be rewarded for helpful answers.
    Regards,
    Harini S

    Harini
    Welcome to xMII.
    Though i nvr used such things from the SAP R/3 system side, i think the logical system name format must be something like <b>SAPSYS<Number></b> for SAP Connection <b>BUSCON<Number></b> for Business Connector. After hving defined the Logical System in R/3 System, u need to configure the <b>SAP Business Connector Interface</b> Action in xMII-based Business Logic Services.
    In additional to this, hope this following links will help u to understand more
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246
    Wait till there comes other some suggestions/solutions for ur quieries
    Best Regards
    Som

  • Internal order - Error - Different logical system for order

    Hello all,
    I try to send IDoc (INTERNAL_ORDER) from system A to system B.
    I have done:
    - BD64 / WE20 / WE21
    But after having customizing I have got following error:
    Different logical system for order xxxxxx
    Message no. 2075ALE001
    Diagnosis
    Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
    System Response
    Internal order xxxxxxx with master system A cannot be distributed in system B.
    Procedure
    Check customizing for ALE for internal orders.
    How to solve this?
    My aim is to maintain internal order master data in test system.
    Thanks for your help.
    David

    I have found something.
    If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
    Then: how to define "master"?

  • Hi how to create logical systems.

    Hi,
       how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
    thanks
    dhanush.

    Hi,
    transaction:
    SALE -> Basic Settings -> Logical Systems -> Define Logical System
    No, you don't need to create Logical Systems to define RFC destinations.
    Regards,
    Jakub

  • Create logical system

    Hello everibody
    I am starting the configurations of the SRM 5.0 I have a doubt, In the customizing create logical system in SRM I must to create only a SRM logical system or I need to add the logical system of my backend too?
    Thanks
    Nilson

    Hi
    <u>Here are further links to help you out.</u>
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/82/cf7b3c5dc1b160e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/ed/f2044115fbee6fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/74/ec7b3c91c1eb1ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/94/70b64115f2e034e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm</b>
    Hope this will help.
    Please reward incase it suits your requirement.
    Regards
    - Atul

  • Problem in Creating a System through WEB AS

    Hi ,
         I created a System (ECC 6.0) in Portal and testing it through WEB AS.I'am able to "Test the connection for Connectors" but when coming to test WEBAS am getting an error "<b>Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check whether the system can be retrieved
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Check HTTP/S connectivity to the defined backend application
      Results
    1. The system ID is valid
    2. Retrieval of the system was successful
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (srtplecd:8000)
    5. HTTP/S connection failed</b> "
    please help me in this.
    with regards,
    pradeep.B

    Yes i had entered everything required for WAS and when i'am doing Connection Tests through WAS am getting this error "<b>SAP Web AS Connection
      Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check whether the system can be retrieved
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Check HTTP/S connectivity to the defined backend application
      Results
    1. The system ID is valid
    2. Retrieval of the system was successful
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (srtplecd:8000)
    5. HTTP/S connection failed</b>"

  • Error: Local logical system is not defined

    Hello
    Our scenario is File-XI-IDOC , wherein we connect to SAP R/3 Development server for posting IDOC’s
    Now , we need to connect to SAP R/3 Quality server for posting the same IDOCs.
    However, recently, the Quality system database was refreshed with production data completely Hence all the ALE configuration data in Quality tables got erased, due to which we are not able to send IDOCs to Quality
    Now, we proceeded as follows :
    1. We set up Logical System in Quality
    2. We entered the partner profiles too
    However when we goto transaction 'BD64' , it gives error as "Local logical system is not defined"
    Hence we had to redistribute the profile from the sender system, and IDOC started being posted correctly
    But, we need to know, why cannot we execute 'BD64' in Quality itself and also, will this have any impact on our IDOC posting
    Further, if Quality is refreshed every now and then, do we need to repeat the above process each time or some other way is available to restore the ALE configuration data automatically
    Regards

    Hi Naveed,
    i made the following settings:
    SCC4: new entries created
    100     Sending System
    200     Receiving System
    SM59: new ABAP type 3 connections:
    RFC_DEST_LS_100
    RFC_DEST_LS_200
    - Tab Logon & Security Logon user: current user (bcuser client 001)
    Connection test is successful
    - Technical Settings: target host: localhost
    SALE: new logical systems created
    LS_100
    LS_200
    SCC4:
    double click on 100 Sending System   configured with logical system LS_100
    double click on 200 Receiving System configured with logical system LS_200
    kind regards
    Andreas

  • Error:No Logical system for FI is maintained.

    Hi,
    we are working on SRM 4.0 and i got the below error messages while trying to create the shopping cart from catalog in quality system.
    1. No Logical system for FI is maintained.inform system admin.
    2. Enter company code.
    3. Partner00000123458 not found.
    we have checked org structure in production and quality system,but there is no problem with production. problem with quality system only. even both systems are having same structure.
    can you please advise  where we need to check the settings pertaining to logical system in SRM side.
    Regards,
    SIS

    Hi
    1.Kindly make ensure that all SPRO settings with quality logical system ( ECC as well as SRM) .
    2. check org attribure value  logical sytem too

Maybe you are looking for

  • Save As .doc in Pages?

    I started to use Pages (comming from Word for Mac) but am annoyed with this "Export for Word" issue. I understood that everytime I need to send a document to a Windows user, I have to export it to Word. That's ok. But my files are stored in a network

  • How to create Business rules framework

    Hi All, Currently I have a requirement to implement SAP Collections management in ISU without using Dunning process. I need to use Business Rules Framework (BRF) to configure rules, but I know about BRF to some extent (theoritically). Can someone ple

  • PS opens vector smart object all pixilated

    I have this problem when using graphics from Illustrator as vector smart objects in Photoshop. I have followed tones of heated discussions on this but I haven't got any further. So here is what I do following the steps on the PS help: I copy graphics

  • Problems while doing a rollback on MQSeries using a java client

    Hi, I'm new to using MQSeries with Java client. I have a kind of similar problem. I have a set of messages in a Queue. When i'm doing a rollback on certain message it's returing to the same pointer where it had come from in the queue. When i'm iterat

  • Multiple Designers Working on Same Site in DreamWeaver, HELP!

    Here are the specifics: Mac based design team Three designers using CS4 Three designers using CS2 Designers working on the same website Website is on a network drive (all working files are on the network drive, no users have website files on their lo