Error creating sdo_pc point cloud: "ORA-02289: sequence does not exist"
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0
I've come across a problem when creating point clouds - every so often I'll get an error about a sequence not existing.
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: DROP SEQUENCE "MDPCS_a_17745$$$"
ORA-29400: data cartridge error
ORA-02289: sequence does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 171
ORA-06512: at "MDSYS.SDO_PC_PKG", line 179
ORA-06512: at line 17
I've got a test case which creates a table where we'll put a sdo_pc, a block table and then a loading XYZ table. We then loop a bunch of times and create a PC for each.
Test case setup:
create table pc_test (
id integer primary key,
pc sdo_pc);
create sequence pc_test_id;
create table pc_test_blocks as select * from mdsys.sdo_pc_blk_table;
create table xyz (
rid number,
val_d1 number,
val_d2 number,
val_d3 number);
insert /*+ append */ into xyz (
select
rownum,
round(dbms_random.value(1,10000),2),
round(dbms_random.value(1,10000),2),
round(dbms_random.value(20,50),2)
from dual
connect by level <= 1000);
commit;
Run test case:
declare
l_pc sdo_pc;
l_id pls_integer;
begin
for i in 1..50 loop
l_pc := sdo_pc_pkg.init(
'PC_TEST', 'PC', 'PC_TEST_BLOCKS', 'blk_capacity=500',
sdo_geometry(2003, 2157, NULL, sdo_elem_info_array(1,1003,3), sdo_ordinate_array(400000, 500000, 800000, 1000000)),
0.005, 3, null);
l_id := pc_test_id.nextval;
dbms_output.put_line('PC_TEST id=' || l_id);
insert into pc_test (id, pc) values (l_id, l_pc);
sdo_pc_pkg.create_pc(l_pc, 'XYZ');
end loop;
end;
Some of the PCs will create, but eventually it'll blow up with
ORA-02289: sequence does not exist
In so far as I can tell, once I call sdo_pc_pkg.create_pc(), Oracle is creating a sequence with a name such as MDPCS_a_1751F$$$. When it is done creating the blocks, it then tries to drop the sequence. However the statement to drop the sequence is wrapped in double quotes - so if the sequence name contained any lowercase letters then it will error out when trying to drop it. The values used between the underscores seem to be hexadecimal - sometimes they're numbers only, sometimes numbers and uppercase letters, sometimes numbers and lowercase letters.
Has anybody else come across this issue?
The issue isn't critical as the PC blocks do seem to be created correctly, so the issues are: (a) my pl/sql block errors out and (b) I'm left with sequences lying around.
For the former I'll catch the exception and ignore it, for the latter I'll just drop the sequences myself afterwards.
I tried the test on 11.2.0.4. On that release I get an error during a rename:
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: RENAME "MDPCI_a_26062$$$" TO "M3_A_26062$$"
ORA-29400: data cartridge error
ORA-04043: object MDPCI_a_26062$$$ does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 157
ORA-06512: at "MDSYS.SDO_PC_PKG", line 74
ORA-06512: at line 17
Similar Messages
-
Dears,
I created simple custom workflow (Start -> Notification -> End).
I got the following error when I run the workflow.
[WF_ERROR] ERROR_MESSAGE=ORA-02289: sequence does not exist ERROR_STACK= FND_SEARCH_EVENTS.On_Object_Change(oracle.apps.wf.notification.send, 5C84790B967158FFE04400144F23BF3C)
The notification activity returned this error but the notification has been sent to performer.
I searched for solution to fix this problem and I found one result for the same problem without any solution.
http://www.itpub.net/thread-1558559-1-1.html
Thank youIt looks as if DB sequence FND_SEARCH_EVENTS_SEQ does not exist. Please try to reload it as follows:
java oracle.apps.fnd.odf2.FndXdfCmp applsys <pwd> apps <pwd> thin "<db server>:<db port>:<SID>" all $FND_TOP/patch/115/xdf/fnd_search_events_seq.xdf $FND_TOP/patch/115/xdf/xsl
Regards,
Alejandro -
Error ORA-02289: sequence does not exist
While I was practicing chapter 6 a book on "hands-on oracle database 10 g express edition for windows" by Mr. Bobrowski forwarded by tom kyte, I like to be one those as well, lol, the living legend of oracle technology <page 225-226> , I got the following error while trying to insert the data manually
error ORA-02289: sequence does not exist
I also checked the sequence, it does exist ,
host-ids, db-ids, ap-ids all do exists
I am wondering my OS windows xp and however, I have entered AIX in host OS field and 5.2.0.0 in the hostos_version field and cpu=4
I kind do not understand this too since my pc running windows xp
any help would be appreciated since i couldn't go forward in my practice.
I e-mailed the author of the book (oracle Press) but no-reply so far, well I can understand that there is no money.Basically, I copied everything from the cd-rom provided in the book of this author steve, oracle press. I logged on using my account <system> and password. The user is here only one which is <system>.
Everything was working well, until then as per the direction in the chapters upto 1- to mid 6, this is the first time I am stuck in following this book's simple excercises. It also asks me to look at the object if the sequence host_ids does exists in the drop down combo, as a matter of fact it does exist.
I am still wondering my question "my OS windows xp and however, I have entered AIX in host _OS field and 5.2.0.0 in the host_os_version field and cpu=4
I kind do not understand this too since my pc running windows xp " -
ORA-02289: sequence does not exist Error
When add Entity Attribute Value : adf.object.nextVal('DenialCommentId')
Value Type: Expression
Iam getting ORA-02289: sequence does not exist Error in 11g 1.1.3.0 version .How to Solve it .Any solutions please suggest me .Thanx in advance
Ravitry using adf.object.nextValue('DenialCommentId') to find out whether the compiler is looking for a sequence named object in schema adf or not.
Regards
Etbin -
I know the reason is that PL/SQL is pre-compilation, so now dbVersion < '9.3.350', even if I don't need get REFDESIG_ID_SEQ.nextval ,
it will also cause this compilation error. So my question is how should I code that?
When dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ, just print '1####';
else get REFDESIG_ID_SEQ.nextval , then print '2####'
But now even if dbVersion < '9.3.350', it will cause compilation error[ORA-02289: sequence does not exist] .
How to resolve this? Thanks a lot.
declare
maxid number;
nextid number;
agileid number;
v_date date;
dbVersion varchar(8):=0;
begin
select substr(value,1,7) into dbVersion from propertytable where parentid = 5001 and propertyid=37;
DBMS_OUTPUT.PUT_LINE(dbVersion);
if (dbVersion < '9.3.350') then
DBMS_OUTPUT.PUT_LINE('1####');
else
DBMS_OUTPUT.PUT_LINE('2####');
select REFDESIG_ID_SEQ.nextval into agileid from dual;
end if;
end;In my DB, If dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ
When dbVersion >= '9.3.350' ,sequence REFDESIG_ID_SEQ will exist,
Now my dbVersion < '9.3.350' , and this pl/sql also cause this error.
SO how should I to resolve it ?
Now I need a test case, if dbVersion < '9.3.350' , then print '1####';
else , get REFDESIG_ID_SEQ.nextval firstly , then print '2####'
How should I code?Thanks a lot. -
ORA-02289 (10: 10): PL/SQL: ORA-02289: sequence does not exist
Hi,
I want to run a trigger on SCOTT account.But wheni try to run it.I am getting ' ORA-02289 (10: 10): PL/SQL: ORA-02289: sequence does not exist'.PLease help outSequence FUNCTION_SEQ does not exist...
Pease run
Select * from user_objects
where object_type='SEQUENCE'
and object_name='FUNCTION_SEQ'In order to see that this object doesnt exist on your schema...
Maybe you are trying to use sequence in different schema... Check it out too
Select * from all_objects
where object_type='SEQUENCE'
and object_name='FUNCTION_SEQ'And if you has access to DBA_ views check this too...
Select * from dba_objects
where object_type='SEQUENCE'
and object_name='FUNCTION_SEQ'If you need such sequence please give us an example of values you need and will provide a sequence creation script for you.. -
; ORA-02289: sequence does not exist + while sync
Hi..
I've installed the samples on the mobile server and on the palm-emulator and want to sync now.
I always get the following error at the server:
BMS: OWNER IS NOT A CLIENT
log1: log_S11U1
BMS: conn user =MOBILEADMIN, e[0]=S11U1
BMS
log1: log_S11U1
BMS: SELECT "S11U1
BMS"."TID$$".NEXTVAL FROM DUAL
Decrement client download 0
log1: log_S11U1
-!!!- BMS: Exception message is ORA-02289: Diese Sequenz gibt es nicht -!!!-
log1: log_S11U1
BMS: Starting Consolidator Servlet Context Run...
log1: log_S11U1
BMS: SENDING data...
log1: log_S11U1
What's wrong here? Please help me.
Thanks,
AlHi ,
I too got similar errors few months ago and i reset the user parameters of that user (webtogo->users->datasubsetting )and it automatically cleared with a complete refresh of the publication. -
ORA-02289: sequence does not exist
Hi all. ORACLE Newbie alert!
I am using TOAD for Oracle 8.6
The Oracle database version is
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
I have been tasked with monitoring a table from another schema, using a different account.
The first thing I did was create this table in my SOMERSET schema
CREATE TABLE MONITOR_PERSONS
IDENTIFIER INTEGER,
OLD_FAMILY_NAME VARCHAR2(40 BYTE),
OLD_FIRST_NAMES VARCHAR2(40 BYTE),
NEW_FAMILY_NAME VARCHAR2(40 BYTE),
NEW_FIRST_NAMES VARCHAR2(40 BYTE),
UPDATE_DATE DATE,
UPDATE_STATUS CHAR(1 CHAR),
PERSONS_IDENTIFIER INTEGER
then a SEQUENCE to be used by the above table
CREATE SEQUENCE SOMERSET.MONITOR_PERSONS_SEQ
START WITH 1
MAXVALUE 999999999999999999999999999
MINVALUE 1
NOCYCLE
NOCACHE
NOORDER;
then a trigger to watch the other schema's table and insert a record in my MONITOR_PERSONS table
CREATE OR REPLACE TRIGGER PERSONS_AFTER_UPDATE
AFTER UPDATE
OF FAMILY_NAME
,FIRST_NAMES
ON SWIFT_OWNER.PERSONS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
INSERT INTO SOMERSET.MONITOR_PERSONS
IDENTIFIER,
OLD_FAMILY_NAME,
OLD_FIRST_NAMES,
NEW_FAMILY_NAME,
NEW_FIRST_NAMES,
UPDATE_DATE,
UPDATE_STATUS,
PERSONS_IDENTIFIER)
VALUES
SOMERSET.MONITOR_PERSONS_SEQ.nextval,
:OLD.FAMILY_NAME,
:OLD.FIRST_NAMES,
:NEW.FAMILY_NAME,
:NEW.FIRST_NAMES,
sysdate,
'U',
:OLD.IDENTIFIER);
END PERSONS_AFTER_UPDATE;
Which compiles with this error
18/11 PLS-00302: component 'MONITOR_PERSONS_SEQ' must be declared
I have been around the net a number of times, and I just can't figure out why a sequence that exists in the same schema as the trigger is causing this issue.
Can someone help please?Don't know why that would be. But here is the test result:
SQL> create table mytable_without_trigger
2 ( id number
3 , name varchar2(30)
4 )
5 /
Tabel is aangemaakt.
SQL> create table mytable_with_trigger
2 ( id number
3 , name varchar2(30)
4 )
5 /
Tabel is aangemaakt.
SQL> create sequence myseq start with 1 increment by 1 nocache
2 /
Reeks is aangemaakt.
SQL> create package my_package
2 as
3 function get_new_id return number;
4 end;
5 /
Package is aangemaakt.
SQL> create package body my_package
2 as
3 function get_new_id return number
4 is
5 l_new_id number;
6 begin
7 select myseq.nextval into l_new_id from dual;
8 return l_new_id;
9 end;
10 end;
11 /
Package-body is aangemaakt.
SQL> create or replace trigger my_trigger
2 before insert on mytable_with_trigger
3 for each row
4 begin
5 :new.id := my_package.get_new_id;
6 end;
7 /
Trigger is aangemaakt.
SQL> insert into mytable_without_trigger (id,name) select myseq.nextval, 'abc' from (select level from dual connect by level <= 100)
2 /
100 rijen zijn aangemaakt.
SQL> insert into mytable_with_trigger (name) select 'abc' from (select level from dual connect by level <= 100)
2 /
100 rijen zijn aangemaakt.
SQL> set timing on
SQL> insert into mytable_without_trigger (id,name) select myseq.nextval, 'abc' from (select level from dual connect by level <= 10000)
2 /
10000 rijen zijn aangemaakt.
Verstreken: 00:00:05.09
SQL> insert into mytable_with_trigger (name) select 'abc' from (select level from dual connect by level <= 10000)
2 /
10000 rijen zijn aangemaakt.
Verstreken: 00:00:08.09
SQL> set timing off
SQL> begin
2 runstats_pkg.rs_start;
3 insert into mytable_without_trigger (id,name) select myseq.nextval, 'abc' from (select level from dual connect by level <= 10000);
4 runstats_pkg.rs_middle;
5 insert into mytable_with_trigger (name) select 'abc' from (select level from dual connect by level <= 10000);
6 runstats_pkg.rs_stop(1000);
7 end;
8 /
Run1 draaide in 514 hsecs
Run2 draaide in 848 hsecs
Run1 draaide in 60,61% van de tijd
Naam Run1 Run2 Verschil
STAT.session cursor cache hits 10,002 8,157 -1,845
LATCH.enqueues 38 1,897 1,859
LATCH.session idle bit 62 1,979 1,917
LATCH.library cache pin allocation 20,354 24,253 3,899
STAT.redo entries 20,151 30,094 9,943
STAT.buffer is not pinned count 51 10,051 10,000
STAT.table scan blocks gotten 1 10,001 10,000
STAT.table scans (short tables) 1 10,001 10,000
STAT.table scan rows gotten 1 10,001 10,000
STAT.no work - consistent read gets 33 10,033 10,000
STAT.recursive calls 140,097 150,097 10,000
STAT.execute count 10,008 20,008 10,000
STAT.db block gets 30,514 40,630 10,116
LATCH.redo allocation 22,401 33,442 11,041
LATCH.shared pool 51,928 67,626 15,698
STAT.db block changes 40,263 60,235 19,972
STAT.consistent gets 20,100 50,084 29,984
STAT.calls to get snapshot scn: kcmgss 30,014 60,014 30,000
LATCH.library cache pin 97,379 128,794 31,415
STAT.session logical reads 50,614 90,714 40,100
LATCH.library cache 111,694 152,456 40,762
LATCH.cache buffers chains 199,536 341,151 141,615
LATCH.session allocation 2,168 286,896 284,728
STAT.redo size 7,397,124 9,772,492 2,375,368
Run1 latches totaal versus run2 -- verschil en percentage
Run1 Run2 Verschil Pct
702,934 1,239,549 536,615 56.71%
PL/SQL-procedure is geslaagd.Regards,
Rob. -
Import Error: ORA-01435 : User does not exist
Hi all,
I am importing a dump into 11g Database, the dump taken from Old Financial release 6 [EBIZ]
i given this command:
IMP FILE=EXPDUMP.DMP BUFFER=524288000 FULL=Y IGNORE=Y
Import user system and password given...
Once its started and getting error
+"ALTER USER "PERFUSER" QUOTA UNLIMITED ON "OTHERD""+
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'PERFUSER' does not exist
IMP-00017: following statement failed with ORACLE error 1918:
+"ALTER USER "DUB_QUERY" QUOTA UNLIMITED ON "OTHERD""+
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'DUB_QUERY' does not exist
IMP-00017: following statement failed with ORACLE error 1918:
+"ALTER USER "OEMV22" QUOTA UNLIMITED ON "OEM_REPOSITORY""+
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'OEMV22' does not exist
IMP-00017: following statement failed with ORACLE error 1918:
+"ALTER USER "W03063_ITD" QUOTA UNLIMITED ON "TEMP" QUOTA UNLIMITED ON "OEM_R"+
+"EPOSITORY""+
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'W03063_ITD' does not exist
+. importing APPS's objects into APPS+
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
+. importing DUB_QUERY's objects into DUB_QUERY+
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
+. importing SYSTEM's objects into SYSTEM+
+. importing APPLSYS's objects into APPLSYS+
+"ALTER SESSION SET CURRENT_SCHEMA= "APPLSYS""+
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
IMP-00000: Import terminated unsuccessfully
Kindly advice me what is the wrong,,
I have created all the data files same like Old Database. so while importing All the USERs will created, if its correct then why this "*ORA-01435 : User does not exist*" coming...
Regards
Paja
Edited by: Hameed on Jul 2, 2012 4:50 AMCreate tablespace :
select 'CREATE TABLESPACE '||TABLESPACE_NAME||' DATAFILE '||FILE_NAME||' SIZE '||BYTES||' autoextend on '||';'
from dba_data_files
order by tablespace_name;
Create User :
select ' CREATE USER '||USERNAME||' IDENTIFIED BY '||USERNAME||' DEFAULT TABLESPACE '||DEFAULT_TABLESPACE||' temporary tablespace ' ||' TEMP quota unlimited on '|| DEFAULT_TABLESPACE||';'
from dba_users
order by USERNAME;
Create Role
select 'CREATE ROLE ' || ROLE || ' ;'
from DBA_ROLES
order by ROLE
Grant Role :
select ' GRANT '|| GRANTED_ROLE || ' to ' || GRANTEE || ' ;'
from DBA_ROLE_PRIVS
order by GRANTED_ROLE
Br
osama
Edited by: Osama-mustafa on Jul 2, 2012 5:47 PM -
Client sync failure: "sequence does not exist"
Hello everyone,
I could use some help on this.Using 10.3 mobile server and a mobile6 client (using the official mobile6 patch). After some syncs, a mobile client gets the error "sequence does not exist", and the replication fails.
When looking at the server log, after the client has successfully uploaded its data, a sequence "M$8232031$M" is created on the server just before the client can download its new data. Then, the server tries to get the nextval from that sequence - and the sequence is not there !!
What happened, what can cause this behaviour ?
Here is an excerpt from the server log with the "faulty" client sync :
clog: Subscription.prepStatement: ALL: SQL: INSERT INTO MOBILEADMIN.C$ALL_MANGLED_NAMES(CLIENTID,ORIGINAL_NAME,MANGLED_NAME) VALUES(?,?,?):
Object: @1da9a66
clog: Subscription.execDirectLogged: FINEST: GENERAL: Created M$8232031$M
clog: Subscription.mangleOS: ALL: FUNCTION: Exiting
clog: Subscription.pstmClose: ALL: FUNCTION: Entering
clog: Subscription.pstmClose: FINEST: GENERAL: pstmt::close
clog: Subscription.pstmClose: ALL: FUNCTION: Exiting
clog: Subscription.mangle: FINEST: GENERAL: conn user =MOBILEADMIN, e[0]=MOBILEADMIN
clog: Subscription.mangle: ALL: FUNCTION: Exiting: user.equals(e[0])
clog: Consolidator.DQ: ALL: FUNCTION: Invoking
clog: O8Server.advanceSequence: ALL: FUNCTION: Invoking
clog: Subscription.execSelectDirect: ALL: FUNCTION: Entering
clog: Subscription.execSelectDirect: ALL: SQL: exec:::
Object: SELECT "M$8232031$M".NEXTVAL FROM DUAL
clog: HeliosSession.startSession: FINEST: GENERAL: Decrement client download 0
clog: HeliosSession.clientDownload: ALL: FUNCTION: Invoking
clog: HeliosSession.startSession: MANDATORY: ALL:
Exception: java.sql.SQLException: ORA-02289: Sequence ist nicht vorhanden.
ORA-02289: Sequence ist nicht vorhanden.
clog: HeliosSession.sendE, s=ORA-02289: Sequence ist nicht vorhanden.
: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: FINEST: GENERAL: deflated total in,out is 52,2 bytes
clog: HeliosSession.sendCompress: FINEST: GENERAL: Sending byte array of 2 bytes
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: HeliosSession.initConvOS: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:16
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:8
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: HeliosSession.sendCompress: ALL: FUNCTION: Exiting
clog: HeliosSession.sendE: ALL: FUNCTION: Exiting
clog: HeliosSession.sendCompress: ALL: FUNCTION: Entering
clog: HeliosSession.sendCompress: FINEST: GENERAL: Sending byte array of 60 bytes
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: ConvAtOutputStream.write: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.write: FINEST: GENERAL: exlen:6
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.write: ALL: FUNCTION: Exiting
clog: HeliosSession.sendConv: ALL: FUNCTION: Invoking
clog: ConvAtOutputStream.flush: ALL: FUNCTION: Entering
clog: ConvAtOutputStream.flush: FINEST: GENERAL: tail = 6
clog: ConvAtOutputStream.xop: ALL: FUNCTION: Invoking
clog: Client.send: ALL: FUNCTION: Entering
clog: Client.send: ALL: FUNCTION: Exiting
clog: ConvAtOutputStream.flush: FINEST: GENERAL: Sent to pipe 16 bytes
clog: HeliosSession.sendCompress: ALL: FUNCTION: Exiting
clog: Client.flush: ALL: FUNCTION: Entering
clog: Client.flush: ALL: RESUME: Data length: 86
clog: Client.flush: ALL: FUNCTION: Exiting
clog: HeliosSession.startSession: FINEST: GENERAL: disconnecting jdbc
clog: JupConnection.destroy: ALL: FUNCTION: Entering
clog: JupConnection.destroy: ALL: FUNCTION: Exiting
clog: HeliosSession.startSession: ALL: FUNCTION: Exiting
clog: Client.startSync: MANDATORY: ALL:
Exception: java.sql.SQLException: ORA-02289: Sequence ist nicht vorhanden.
ORA-02289: Sequence ist nicht vorhanden.
clog: HeliosSession.getSessionType: ALL: FUNCTION: Invoking
clog: Server.newConnection (): ALL: FUNCTION: InvokingCheck your err.log after you create the users to see if there is any issues.
I have had various issues with users Data Subsetting not being set. I find this happens when there are many blocking locks and users are being drop, created, password change, etc. Blocking locks are part of the nature of the application, the only way to really combat that is to do some performance tuning on the MGP and the SYNC.
Here is how I create my user:
try {
rm.createUser(USERNAME, PASSWORD, DISPLAY_NAME, "U");
rm.setUserAccess("/app", USERNAME, true);
rm.setTemplateVariable("/app", USERNAME, "USER_ID", PARAMETER);
rm.commitTransaction();
} catch (ResException res) {
rm.rollbackTransaction();
res.printStackTrace();
} -
Error in Local Message System: RFC destination MB3AP1039 does not exist.
Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
Can anyone help me in resolving the above issue.
Thanks & Regards,
Mirza Kaleemulla Baig.Dear friend
You have to of following option
1.Define Service Desk destination in the R/3 systems:
Note: for this you need to log in the R/3 system.
Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
2.a. Go to transaction SM30.
b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
c. Press the Continue button in the following screen:
d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
e. In the next screen, enter the following information:
In the RFC Destination you should point to your Solution Manager destination RFC.
0ss_msg w sm_bsmclnt_back cust620 1.0
shailesh -
"ORA-21700: object does not exist or is marked for delete" select from ADT
Posted this in OLAP section as well, but since this is Object technology, I thought I would repeat it here. Sorry about the duplication.
BTW, I'm using Oracle9i 9.2.0.4.1.
I'm trying to create a script that can automate the process of generating abstract data types for use in an OLAP_TABLE function. I'm following the examples in the documentation. Everything runs great the FIRST time I run my script, but when I drop my types and re-create them, when I run the next SELECT statement against the OLAP_TABLE function, I get:
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
My script drops the ADTs before creating, but somehow they are not REALLY being dropped.
SET ECHO ON
SET SERVEROUT ON
DROP TYPE ts_table_6;
DROP TYPE ts_row6;
CREATE TYPE ts_row6 AS OBJECT(
CONJ2002 VARCHAR2(400),
CONJ2002_DATA number(16),
PERIOD VARCHAR2(10),
PERIOD_NAME VARCHAR2(20));
CREATE TYPE ts_table_6 AS TABLE OF ts_row6;
SELECT CONJ2002, period, period_name, conj2002_data FROM TABLE(OLAP_TABLE(
'REFVLMTA DURATION QUERY',
'ts_table_6',
'limit CONJ2002 to first 3',
'MEASURE CONJ2002_DATA from CONJ2002.DATA
DIMENSION CONJ2002 from CONJ2002
DIMENSION PERIOD from PERIOD WITH
ATTRIBUTE PERIOD_NAME from period.name'));
Again, it works the first time, but not the second time. I need to bump up the ADT names to ts_row7 and ts_table_7. SQL Plus says the types are being dropped.
Any ideas?
Dan Vlamis [email protected]Hi Dan
What append if you do a connect between the DROP and the CREATE statements?
Chris -
ORA-01435: user does not exist when using imp utility
I installed Oracle 8.1.7.0.0 successfully on WINDOWS 2000 and created a database TEST using DBCA. Then I used a script to creat a tablespace and a user in TEST databse. I could use the imp utility to import the data (a dmp file) to the TEST database without any problem. But after I applied a patch to bring up the version to Oracle 8.1.7.4.1, I got the following error when I tried to use the imp utility again to import the data (a dmp file) to the TEST database.
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
IMP-00000: Import terminated unsuccessfully
I checked that I created the same user test (as it is in dmp file I wanted to import) on TEST, and I could login to TEST using:
sqlplus test/test@TEST
The command I used is:
imp system/password@TEST file=test.dmp full=y log=importTEST.TEST.tmp
I also tried to use the following command:
imp system/password@TEST file=test.dmp fromuser=test touser=test log=importTEST.TEST.tmp
and got the same error as before.
Anyone has any clues what could go wrong? The only difference for me to import the data on TEST is that the
previous successful import was done in Oracle 8.1.7.0.0.
Is it possible that I missed something during the applying of the patch 8.1.7.4.1?
Thanks, and your help is greatly appreciated.
JaneTher is a set of instruction to be followed after installing the patch set 8.1.7.4.1 after running it thru OUI.They are as follows. Please complete these steps and u should not have problems any more.
When applying this patchset on Windows NT and Windows 2000, you must log onto the system as a user with Administrative privileges (e.g., as a user which is a member of the local Administrators group).
1.Disabling system triggers.
Before performing the next step, you must first set SYSTEMTRIG_ENABLED = FALSE in the initialization parameter file. To do this add the following line to your init<sid>.ora file and restart the database (see Note 149948.1 in Metalink for more information on this issue).
systemtrig_enabled=false
2.Invoke SQL*Plus (sqlplus), connect as internal and run the following:
select * from duc$ where PACK='JIS$INTERCEPTOR$' ;
If no rows were returned go to the next step. If a row was returned delete it using the following:
delete from duc$ where PACK='JIS$INTERCEPTOR$' ;
commit;
3.Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL scripts with event 10520 set. NOTE: This event is not intended for regular database operation and when turned on below by the 'ALTER SESSION' command will automatically be turned off by the subsequent 'CONNECT' command.
ALTER SESSION SET EVENTS '10520 TRACE NAME CONTEXT FOREVER, LEVEL 10';
?/rdbms/admin/catalog.sql
?/rdbms/admin/catproc.sql
?/rdbms/admin/catrep.sql (This only needs to be run if you are using symmetric/advanced replication. This is not necessary for sites using dblinks and read-only snapshots if symmetric/advanced replication is not installed)
CONNECT / AS SYSDBA;
update obj$ set status=5 where type#=29 and owner#!=0;
commit;
4.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install.
If Java has previously been loaded into the database, invoke SQL*Plus (sqlplus), connect as internal and run the following SQL DDL command(* Note:If Java has not previously been loaded into the database, skip this step).:
SQL> create or replace java system
2 /
(Note that the / (slash) is important to ensure the execution of the command).
To ensure the correct installation of the XDK in the database run the following 2 scripts (Bug 2115227):
$ORACLE_HOME/oracore/admin/initxml.sql
$ORACLE_HOME/rdbms/admin/catxsu.sql
* To determine whether Java has previously been loaded into the database:
invoke SQL*Plus (sqlplus), connect as internal and run the following:
SQL> select count(*) from all_objects where object_type like 'JAVA%';
Java is installed if you get a non zero result returned from the query.
5.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
If Java has previously been loaded into the database, invoke SQL*Plus (sqlplus), connect as internal and run the following scripts which are located in $ORACLE_HOME/javavm/install ( Note: If Java has not previously been loaded into the database, you can skip this step):
load_jis.sql
jisja.sql
initjsp.sql
jspja.sql
Notes:
When running the $ORACLE_HOME/javavm/install/jisja.sql script the following error may be reported and can be ignored:
call jis_exit_java_session(0)
ERROR at line 1:
ORA-29515: exit called from Java code with status 0
Bug 1459233 was filed against this problem which is fixed in 9i.
6.If you deleted a row from duc$ in step 8 then reinsert it again. Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL:
insert into duc$ (OWNER, PACK, PROC, FIELD1, OPERATION#, SEQ) values ('SYS', 'JIS$INTERCEPTOR$', 'USER_DROPPED', 0, 1, 1);
commit;
7.Enabling system triggers.
You must either remove SYSTEMTRIG_ENABLED from the initialization parameter file or explicitly set it to TRUE before attempting any other patch set post-install steps. Restart the database.
8.This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this. Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL script:
?/rdbms/admin/utlrp.sql
9.Execute the following steps only if you have installed Oracle interMedia Text in the database you are attempting to modify:
If you have not previously unlocked the ctxsys account and supplied a password for that account, you need to do so. (If you have needed to use Oracle Text in any way prior to applying the patchset, you will have already performed this step, and you can skip this.) Do so by issuing the following statement:
ALTER USER ctxsys IDENTIFIED BY <passwd> ACCOUNT UNLOCK;
If you have already installed 8.1.7.2 or 8.1.7.3, go directly to step 7 below.
If you have already installed 8.1.7.1, go directly to step 5 below.
CONNECT ctxsys/<passwd>;
@?/ctx/admin/upgrade/u0801071.sql
CONNECT ctxsys/<passwd>;
@?/ctx/admin/upgrade/u0801072.sql
CONNECT / AS SYSDBA;
@?/ctx/admin/upgrade/s0801074.sql
CONNECT ctxsys/<passwd>
@?/ctx/admin/dr0pkh.sql
@?/ctx/admin/dr0plb.sql
@?/ctx/admin/dr0type.plb
@?/ctx/admin/dr0typec.plb
9.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
The installation of this patch set fixes a potential security hole in the XSQL Servlet - see here for more detail. The patchset installation does not, however, modify any of the Oracle HTTP Server configuration files to reflect changes to the XSQL Servlet installation. If you have previously installed the Oracle HTTP Server, you will need to update one of the configuration files manually after the patchset installation is complete. If you do not do so, the XSQL Servlet may not work in the context of the Oracle HTTP Server after the patchset is installed. To update your Oracle HTTP Server configuration, perform the following steps:
1) Edit the file: $ORACLE_HOME/Apache/Jserv/conf/jserv.properties
2) Search for the string: "XSQLConfig.xml File location"
3) Modify the parameter wrapper.classpath on the line immediately following the above string to read: $ORACLE_HOME/oracore/admin
4) Save the file.
10.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
The installation of this patch set fixes a potential security hole in the PL/SQL XML parser - see here for more detail. To load the new XML parser in to the database, run the following script as user SYS:
? /xdk/plsql/parser/bin/load.sql
11.If you are using the RMAN catalog then upgrade it as follows:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;
The post install actions are now complete and the database is now ready for use. -
Shows 'ORA-01435: user does not exist' for the existing user
Hi All,
when I am trying to import this dump into oracle 10g, I am getting following error.
I have created a talespace 'EXIM' for this already
this is my user creation command
CREATE USER EXIM PROFILE DEFAULT IDENTIFIED BY pass DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
ACCOUNT UNLOCK;
GRANT dba to EXIM;
the user exists in the dba_users too.
E:\Eximbills>imp exim/pass file=e:\eximbills\exim.dmp fromuser=exim touser=ex
im;
Import: Release 10.1.0.2.0 - Production on Tue Jan 8 13:00:44 2008
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
export client uses ZHS16GBK character set (possible charset conversion)
export server uses UTF8 NCHAR character set (possible ncharset conversion)
IMP-00008: unrecognized statement in the export file:
. importing EXIM's objects into EXIM;
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
Import terminated successfully with warnings.
thanks in advance
sooryaThis is the error I'm getting whenever I am trying to import 'imp eximsys/h4rdw0rk file=e:eximbills\eximsys.dmp full=y'
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '424F435043303031202"
"02020'; SREC.MAXVAL := '424F43504330303120202020'; SREC.EAVS := 0; SREC.CHV"
"ALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(344299236148902000000000000"
"000000000,344299236148902000000000000000000000); SREC.BKVALS := DBMS_STATS."
"NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHE"
"R_HEADER"','"C_LAST_MODI_BU"', NULL ,NULL,NULL,1,1,0,srec,13,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B0109010101'; SR"
"EC.MAXVAL := '786C0804010101'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
"VALS := DBMS_STATS.NUMARRAY(2454110,2454683); SREC.BKVALS := DBMS_STATS.NUM"
"ARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_H"
"EADER"','"C_LAST_MODI_DATE"', NULL ,NULL,NULL,29,.0344827586206897,0,srec,8"
",6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '50433030314F5031202"
"020202020202020202020202020202020202020202020'; SREC.MAXVAL := '765F70636F7"
"03031202020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
"C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(4167464879929240000000"
"00000000000000,614626762547395000000000000000000000); SREC.BKVALS := DBMS_S"
"TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
"OUCHER_HEADER"','"C_LAST_MODI_OP"', NULL ,NULL,NULL,3,.333333333333333,0,sr"
"ec,33,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B01010A1D18'; SR"
"EC.MAXVAL := '786B0801140C01'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
"VALS := DBMS_STATS.NUMARRAY(2454102.39471065,2454314.79930556); SREC.BKVALS"
" := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NU"
"LL,'"TRX_VOUCHER_HEADER"','"C_LAST_MODI_TIME"', NULL ,NULL,NULL,7308,.00013"
"6836343732895,0,srec,8,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '72756C655F746573744"
"32E786D6C202020202020202020202020202020202020'; SREC.MAXVAL := '72756C655F7"
"46573744D2E786D6C202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
"C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(5943034718115330000000"
"00000000000000,594303471811533000000000000000000000); SREC.BKVALS := DBMS_S"
"TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
"OUCHER_HEADER"','"C_MAIL_RULE"', NULL ,NULL,NULL,2,.5,47698,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '4144343030303430373"
"030303530342020202020202020202020202020202020'; SREC.MAXVAL := '51413430303"
"03530373038393134342020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
"C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(3388826344357990000000"
"00000000000000,421898536943546000000000000000000000); SREC.BKVALS := DBMS_S"
"TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
"OUCHER_HEADER"','"C_MAIN_REF"', NULL ,NULL,NULL,3294,.000303582270795386,0,"
"srec,41,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '44495343'; SREC.MAX"
"VAL := '64736120'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS"
"_STATS.NUMARRAY(354563398993257000000000000000000000,5215698580320240000000"
"00000000000000); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DB"
"MS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_MODULE"', NULL ,N"
"ULL,NULL,14,.0714285714285714,0,srec,5,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '2020202020202020202"
"020202020202020202020202020202020202020202020'; SREC.MAXVAL := '63696E64797"
"46573742020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
"C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(1668050818239890000000"
"00000000000000,516175788196539000000000000000000000); SREC.BKVALS := DBMS_S"
"TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
"OUCHER_HEADER"','"C_MSEND_NAME"', NULL ,NULL,NULL,4,.25,1198,srec,33,6); EN"
"D;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '424F435043303031202"
"02020'; SREC.MAXVAL := '424F43504330303120202020'; SREC.EAVS := 0; SREC.CHV"
"ALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(344299236148902000000000000"
"000000000,344299236148902000000000000000000000); SREC.BKVALS := DBMS_STATS."
"NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHE"
"R_HEADER"','"C_ORG_UNIT_CODE"', NULL ,NULL,NULL,1,1,16,srec,13,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '20'; SREC.MAXVAL :="
" '562D46696E616C3A31'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := "
"DBMS_STATS.NUMARRAY(166153499473115000000000000000000000,447455816866904000"
"000000000000000000); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2"
"; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PEPRTING_INFO"
""', NULL ,NULL,NULL,2,.5,977,srec,3,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '20'; SREC.MAXVAL :="
" '562D46696E616C3A31'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := "
"DBMS_STATS.NUMARRAY(166153499473115000000000000000000000,447455816866904000"
"000000000000000000); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2"
"; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRINTER_NAME""
"', NULL ,NULL,NULL,3,.333333333333333,960,srec,3,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '5B30303130303130303"
"13A4E505D5B3030313030313030313A4E525D'; SREC.MAXVAL := '5B424F4350433030313"
"A4E525D'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NU"
"MARRAY(473476387962467000000000000000000000,4738439330178760000000000000000"
"00000); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS."
"SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRINT_TO_BU"', NULL ,NULL,"
"NULL,4,.25,47203,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRTING_INFO"', NULL ,NUL"
"L,NULL,0,0,47720,srec,0,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '41'; SREC.MAXVAL :="
" '59'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(338150878155639000000000000000000000,4627660027604750000000000000000000"
"00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
"_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRT_MODE"', NULL ,NULL,NULL,3"
",.333333333333333,46148,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '20'; SREC.MAXVAL :="
" '59'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(166805081823989000000000000000000000,4627660027604750000000000000000000"
"00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
"_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_PRT_STATE"', NULL ,NULL,NULL,"
"4,.25,0,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '424F435043303031202"
"02020'; SREC.MAXVAL := '424F43504330303120202020'; SREC.EAVS := 0; SREC.CHV"
"ALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(344299236148902000000000000"
"000000000,344299236148902000000000000000000000); SREC.BKVALS := DBMS_STATS."
"NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHE"
"R_HEADER"','"C_RELEASE_BU"', NULL ,NULL,NULL,1,1,558,srec,13,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B0109010101'; SR"
"EC.MAXVAL := '786B0808010101'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
"VALS := DBMS_STATS.NUMARRAY(2454110,2454321); SREC.BKVALS := DBMS_STATS.NUM"
"ARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_H"
"EADER"','"C_RELEASE_DATE"', NULL ,NULL,NULL,22,.0454545454545455,558,srec,8"
",6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '50433030314F5031202"
"020202020202020202020202020202020202020202020'; SREC.MAXVAL := '765F70636F7"
"03031202020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
"C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(4167464879929240000000"
"00000000000000,614626762547395000000000000000000000); SREC.BKVALS := DBMS_S"
"TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
"OUCHER_HEADER"','"C_RELEASE_OP"', NULL ,NULL,NULL,3,.333333333333333,558,sr"
"ec,33,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '20'; SREC.MAXVAL :="
" '46'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(166805081823989000000000000000000000,3641123624483130000000000000000000"
"00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
"_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_SETTL_AC_PS"', NULL ,NULL,NUL"
"L,2,.5,0,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '654C4F414E202020202"
"020202020202020202020202020202020202020202020'; SREC.MAXVAL := '654C4F414E2"
"02020202020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
"C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(5259697250777070000000"
"00000000000000,525969725077707000000000000000000000); SREC.BKVALS := DBMS_S"
"TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
"OUCHER_HEADER"','"C_STP_CODE"', NULL ,NULL,NULL,1,1,1330,srec,33,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '51415F4D41494C5F544"
"54D50310251415F4D41494C5F54454D5032'; SREC.MAXVAL := '63696E647974657374'; "
"SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(421"
"901952750269000000000000000000000,516175788196539000000000000000000000); SR"
"EC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN"
"_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_TEMPLATES_NAME"', NULL ,NULL,NULL,5,"
".2,47641,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '3230303730313039313"
"032333032393435323630303631343731393039343137'; SREC.MAXVAL := '32303037303"
"83237313035333437353331303631313535363432363135373736'; SREC.EAVS := 0; SRE"
"C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(2605922186194540000000"
"00000000000000,260592218619487000000000000000000000); SREC.BKVALS := DBMS_S"
"TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
"OUCHER_HEADER"','"C_TRX_INDX"', NULL ,NULL,NULL,47720,.0000209555741827326,"
"0,srec,33,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '3132333133313233202"
"020202020202020202020202020202020202020202020'; SREC.MAXVAL := '77657277722"
"02020202020202020202020202020202020202020202020202020'; SREC.EAVS := 0; SRE"
"C.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(2554407224113300000000"
"00000000000000,619940918512825000000000000000000000); SREC.BKVALS := DBMS_S"
"TATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_V"
"OUCHER_HEADER"','"C_TRX_REF"', NULL ,NULL,NULL,3294,.000303582270795386,0,s"
"rec,41,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '424F435043303031202"
"02020'; SREC.MAXVAL := '424F43504330303120202020'; SREC.EAVS := 0; SREC.CHV"
"ALS := NULL; SREC.NOVALS := DBMS_STATS.NUMARRAY(344299236148902000000000000"
"000000000,344299236148902000000000000000000000); SREC.BKVALS := DBMS_STATS."
"NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHE"
"R_HEADER"','"C_UNIT_CODE"', NULL ,NULL,NULL,1,1,0,srec,13,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '4D'; SREC.MAXVAL :="
" '4D'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(399806858107182000000000000000000000,3998068581071820000000000000000000"
"00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
"_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_VCH_STATUS"', NULL ,NULL,NULL"
",1,1,1330,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '4D'; SREC.MAXVAL :="
" '58'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(400458440458057000000000000000000000,4575737059019400000000000000000000"
"00); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET"
"_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"C_VOUCHER_STATE"', NULL ,NULL,N"
"ULL,3,.333333333333333,0,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B0109010101'; SR"
"EC.MAXVAL := '786B081B010101'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
"VALS := DBMS_STATS.NUMARRAY(2454110,2454340); SREC.BKVALS := DBMS_STATS.NUM"
"ARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_H"
"EADER"','"D_SYS_OP_DATE"', NULL ,NULL,NULL,47,.0212765957446809,0,srec,8,6)"
"; END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B0109010101'; SR"
"EC.MAXVAL := '786B0809010101'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
"VALS := DBMS_STATS.NUMARRAY(2454110,2454322); SREC.BKVALS := DBMS_STATS.NUM"
"ARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_H"
"EADER"','"D_SYS_REL_DATE"', NULL ,NULL,NULL,33,.0303030303030303,558,srec,8"
",6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '80'; SREC.MAXVAL :="
" '80'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"I_CPY_NUMS"', NULL ,NULL,N"
"ULL,1,1,1330,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '3A5B6365654766'; SR"
"EC.MAXVAL := 'C10D'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DB"
"MS_STATS.NUMARRAY(-1002000030,12); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1);"
" SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"I"
"_EVENT_TIMES"', NULL ,NULL,NULL,88,.0113636363636364,0,srec,8,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '80'; SREC.MAXVAL :="
" '80'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"I_PECPY_NUMS"', NULL ,NULL"
",NULL,1,1,1330,srec,2,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B01010A1D08'; SR"
"EC.MAXVAL := '786B0801140C01'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
"VALS := DBMS_STATS.NUMARRAY(2454102.39452546,2454314.79930556); SREC.BKVALS"
" := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NU"
"LL,'"TRX_VOUCHER_HEADER"','"T_SYS_OP_TIME"', NULL ,NULL,NULL,7319,.00013663"
"0687252357,0,srec,8,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := '786B01010A1D18'; SR"
"EC.MAXVAL := '786B0801102B16'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NO"
"VALS := DBMS_STATS.NUMARRAY(2454102.39471065,2454314.65440972); SREC.BKVALS"
" := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STATS.SET_COLUMN_STATS(NU"
"LL,'"TRX_VOUCHER_HEADER"','"T_SYS_REL_TIME"', NULL ,NULL,NULL,7139,.0001400"
"75640846057,558,srec,8,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"TRX_VOUCHER_HEADER"','"T_SYS_TRX_TIME"', NULL ,NU"
"LL,NULL,0,0,47720,srec,1,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00041: Warning: object created with compilation warnings
"CREATE FORCE VIEW "EXIMSYS"."TET_TEST" ("CUST_ID",""
"CUST_NM","CUST_NM_ADD","C_CP_UNIT_CODE") AS "
"SELECT CUST_MASTER.CUST_ID, CUST_MASTER.CUST_NM, CUST_MASTER.CUST_NM_ADD, C"
"UST_MASTER.C_CP_UNIT_CODE "
" FROM EXIMTRX.CUST_MASTER CUST_MASTER "
" WHERE CUST_MASTER.CUST_ID='10245'"
About to enable constraints...
Import terminated successfully with warnings.
Thanks, -
DBMS DataPump - Export - ORA-31626: job does not exist - Appreciate ur help
I'm getting the following error while executing the following two stored procedures. I googled and tried some solution out there but, couldn't fix it yet. I think I have all granted permissions. Sometime back when I ran the schema_export procedure it worked in the first attempt and not after that.
ORA-31626: job does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 902
ORA-06512: at "SYS.DBMS_DATAPUMP", line 4758
ORA-06512: at "KUMAR.PARTIAL_EXPORT", line 14
ORA-06512: at line 2
Partial Table Export:
create or replace PROCEDURE partial_export
AS
l_dp_handle NUMBER;
l_last_job_state VARCHAR2 (30) := 'UNDEFINED';
l_job_state VARCHAR2 (30) := 'UNDEFINED';
l_sts ku$_status;
l_job_name VARCHAR2 (100);
l_dirname VARCHAR2 (100);
l_filename VARCHAR2 (100);
BEGIN
l_filename := 'myexpfile.dmp';
-- sets the job name
l_job_name := 'BZ' || SYSDATE;
l_dp_handle :=
DBMS_DATAPUMP.OPEN (operation => 'EXPORT',
job_mode => 'TABLE',
remote_link => NULL,
job_name => l_job_name,
VERSION => 'LATEST'
--specify the database directory and the filename for the export file
DBMS_DATAPUMP.add_file (handle => l_dp_handle,
filename => l_filename,
DIRECTORY => 'TEST_DIR'
DBMS_DATAPUMP.add_file (handle => l_dp_handle,
filename => l_filename || '.LOG',
DIRECTORY => 'TEST_DIR',
filetype => DBMS_DATAPUMP.ku$_file_type_log_file
--specify the tables that I want to export. (EMP,DEPT)
DBMS_DATAPUMP.metadata_filter (handle => l_dp_handle,
NAME => 'NAME_EXPR',
VALUE => 'IN (''EMP'', ''DEPT'')'
-- set subset data export. exports only rows that eno > 400
DBMS_DATAPUMP.data_filter (handle => l_dp_handle,
NAME => 'SUBQUERY',
VALUE => 'WHERE eno > 400',
table_name => 'EMP'
-- set subset data export. exports only rows that dno > 500
DBMS_DATAPUMP.data_filter (handle => l_dp_handle,
NAME => 'SUBQUERY',
VALUE => 'WHERE dno > 500',
table_name => 'DEPT'
DBMS_DATAPUMP.start_job (l_dp_handle);
DBMS_DATAPUMP.detach (l_dp_handle);
END;
Schema Export:
create or replace procedure schema_export
as
l_dp_handle NUMBER;
l_last_job_state VARCHAR2(30) := 'UNDEFINED';
l_job_state VARCHAR2(30) := 'UNDEFINED';
l_sts KU$_STATUS;
BEGIN
l_dp_handle := DBMS_DATAPUMP.open(
operation => 'EXPORT',
job_mode => 'SCHEMA',
remote_link => NULL,
job_name => 'DB_EXPORT',
version => 'LATEST');
DBMS_DATAPUMP.add_file(
handle => l_dp_handle,
filename => 'dbexport.dmp',
directory => 'TEST_DIR');
DBMS_DATAPUMP.metadata_filter(
handle => l_dp_handle,
name => 'SCHEMA_EXPR',
value => '= ''KUMAR''');
DBMS_DATAPUMP.start_job(l_dp_handle);
DBMS_DATAPUMP.detach(l_dp_handle);
END;
Appreciate your hlep.
Thanks
KumarThanks Satish.
I don't have access to Oracle Metalink (I'm using Oracle personal edition). Can someone please post Oracle Metalink note 549781 here?
I couldn't find any useful link when I googled this metalink note number.
Appreciate your help.
Thanks
Kumar
Maybe you are looking for
-
Letters all spaced out when printing e-mail
I have a C5280 HP all in one printer, I am on Windows Vista, computer is a HP SR541OF, and AT&T Yahoo mail. Don't know if this is a printer problem or?. It just started yesterday all of a sudden, I don't think I changed anything. When I print an e-ma
-
Stretching the region dynamically in a facet of panel splitter.
Hi, Jdev version- 11.1.1.6.0 We are using a panel splitter in a jspx page and inside on of the facet of the panel splitter we are using a taskflow with page fragments as a region.The use case is as user can stretch the panel splitter,we want to stret
-
Limiting the number of threads that are created
I am trying to write a web crawler as a way of learning about multi-threading and I have hit a stumbling block (probably my design). The way the application I have started works is that I provide a single URL, which is passed to a thread and that thr
-
How to Reset the Problem Tablespaces message
Hi, this is 10g on Windows. I had a couple of Tablespaces that almost became full, which triggerred the 2 tablespaces to show as Problem Tablespaces in the Database Control tool. I resolved this issue weeks ago, but Database Control still flags these
-
I just bought a new ipod 5 and I'm unable to connect to WI-FI
Is somebody able to give me a help ?