Error creating swf movie file

Hello,
I'm trying to create a virtual world but every time I try and publish it, it says error creating swf movie file. Here's a video to show you what i mean:
http://www.youtube.com/watch?v=WRAAGoQK80A&feature=youtu.be

Hi foxxy123,
Two things that I noticed in the video:
1) You are not saving the file before publishing.
2) Flash warns you about the fonts missing from your system while opening the file.
"The document contains one or more fonts not available on your system. The text will display and publish with the font mapping below:"
So download and install the fonts on your computer "Blaster" and "Blaster Infinite" and save the file before publishing.
It doesn't seem to be saying error creating swf movie file, it just says something about the font not being right.
The message warn you that you have an anti-alias mode set on text and it requires you to have embedded fonts to use anti-aliasing. If you do not want to see that message anymore, then select your text blocks and set the anti-alias types to Use Device Fonts.
You can disable the warning message in the preferences dialog
Edit > Preferences > Warnings > uncheck "Warn on text needs embedded font".
Hope this helps,
Thanks!
Bhawna

Similar Messages

'Error Creating Flash Movie File'

It says "Be sure the destination file is not locked or on a
locked drive. Also, check that the file name is not too long."
I don't see how either of those could be a possibility. And I
get this whether I'm testing the file or publishing it.
Anyone have an idea what's going on?

It's not just Mac, I'm also having the same problem in
Windows. CS3 and CF8 both running on the same machine. After I use
DW to preview my site in the browser, then making changes in Flash
and attempting to republish or preview in browser again, I get the
same error. If you try to modify or delete the SWF file Windows
won't allow it. It's like CF is keeping the SWF file open after
closing the browser?
I am only able to free up the SWF by restarting the CF8
Application Server service.
A real pain in the butt!!

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

Flash CS3 says"Error creating Flash movie...not enough memory available."have 100GB of virtual mem

With large .fla files I often can't get Flash to output .swf files. Usually I get the message "Error creating Flash movie. There was not enough memory available." Sometimes though Flash looks as if it has finished publishing (although slightly too quickly to have really done it), and then there has not been a .swf file created.
Sometimes it's simply a matter of restarting Flash and trying again a few times until Flash decides to cooperate. But now I have a file that just seems like it will never output. My computer has 3 GB of RAM and 100 GB of virtual memory. The .fla file is 152 MG and the .swf would probably be about 20-25 MB.
If there is a workaround in CS3, that would be great. If not, I would upgrade to CS5, if I knew that it would not have the same problem.
I was told by at least two people at Adobe support that the problem has gone away with CS5, but I downloaded the CS5 trial version, and it will not output a .swf of my project. In this case it doesn't give the error message, but just fails silently.

Has this memory limitation been fixed in CS4 or CS5? I have to say, I'm geting really fed up with having to
spend hours coaxing Flash to output .swfs. Is there a reason that it can't use the
3MB of Ram available to it?

How to create a movie file of java 3D animation without altering the code?

Is there a way to create a movie file of a Java 3D animation without altering the source code of the Java 3D animation program???
Because as what I observed, most of the forum recommends extracting the bufferedimages of the animation. And, then using the bufferedimages to do a movie file. In this way, I will need to add in new code in the animation program in order to extract the bufferedimages.
So, is there an alternative way?
My objective is write a program to create movie file of any Java 3D animation.
Pls advise me. Thanks a million.

I'm curious as to why FRAPS will record java3d and
not a java2d app? is there something that Java3d
sets that makes it recognizable by fraps? or?? could
someone or messengers ( =D!) explain this for me?Seems that only in JDK 5.0 or later, does the 2D api automatically use a DirectX or OpenGL rendering pipeline (if available).
Further, these automatic pipelines accelerate polygons and the like, but not low level Graphics2D bit blitting operations.
There are JOGL apis that allow better control over acceleration, and are considered 'thread safe' (single threaded) whereas DirectX pipelines are not.
Interesting demos of this here:
https://jogl-demos.dev.java.net/applettest.html
and
http://www.hardcorepawn.com/RandomGL/
Fraps (commercial) and Taksi (opensource) will reveal that you are actually using acceleration, since they intercept the pipeline at the openGL (and DirectX) level.

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation". Anyone know how to fix this?

Okay, so I try to download and every time it says "There was an error creating a temporary file that is needed to complete the installation".
Anyone know how to fix this?
Please help. I can't get it to work. I've tried uninstalling and it says the same thing. Is there anyway anyone can help me?

HELP!!!! PLEASE!!!!!

CS4 will not create a movie file, it just stops!

Can anyone help, I am at my wits end trying to create a movie file and have tried over half a dozen formats without success. Everything appears to be going well then it just stops! It was fine the last time I tried it 3 months ago.
Waiting in anticipation for a Premiere Pro expert to come to my aid.
Regards
Steve

More information needed for someone to help... please click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

7.7 upgrade: Error: There was an error creating a temporary file

*I get the following error when trying to upgrade to 7.7*
+"There was an error creating a temporary file that is needed to complete this installation"+
*When I got to launch iTunes ver 7.6.1.9 I get the following message*
+"The registry settings used by iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes. iTunes was not properly installed. If you want iTunes to retrieve CD information from the internet, you need to reinstall iTunes"+
The problem I have is I cannot uninstall iTunes using ADD/Remove Programs nor can I upgrade.
Anyone have any suggestions?
BTW, when I launch iTunes it works but I have not hooked my iPOD up yet for fear it will erase.
Thanks!
Message was edited by: Slattern

Ensure antivirus is disabled. McAfee interfered with my iTunes installer resulting in this error. When I temporarily disabled McAfee, the installer completed successfully.

After Effects error: Creating a resource file

Hi everyone
I'm administrating a machine with several users mainly using After Effects. The machine runs on Windows 7 64 bit.
I recently had to install videocopilots Optical Flares. Everything runs fine on my admin account but if i open AE on a user account i get an error message while on the loading screen. It says:
After Effects error: Creating a resource file "c:insert path to OpticalFlares.aex here" (might be a bit different in english as i translated this from german)
Every user has full read and write permission on the AE support files folder. Has anyone ever had such an error? All other plugins work as they should on every account.
Thanks for any hints!
Michael

I still think it is a permissions/ user privileges/ policies/ security issue - if it runs on one account, it is unlikely the plug-in is damaged or you installed the 32bit version in CS5 or vice versa. I strongly suspect the plug-in is unable to probe your graphics card and thus never initializes. Perhaps it's being blocked by some security tool or your user account doesn't have the permissions to load system drivers. The latter can be fixed by changing the respective entry in your group policy editor (gpedit.msc). The respective point would be in Computerkonfiguration --> Windows-Einstellungen --> Sicherheitseinstellungen --> Lokale Richtlinien --> Zuweisen von Benutzerrechetn --> Laden und Entfernen von Gerätetreibern. And of course temporarily turn off security stuff to verify it's not the problem.
Mylenium

Is there any form to create a movi file from 3D Array in CVI?

Hi,
Anyone knows if using CVI, it is possible to create a movie file (avi) from a 3D Array? And if yes could you tell me how to do that without any commercial dll?
Thanks
Hiram Hernandez

Hola Hiram:
Existe una manera de poder guardar .avi de un arreglo en 3D. Te envío un poco de documentación de cómo poder hacerlo. Necesitaras tener instalado NI-IMAQ.
http://zone.ni.com/devzone/cda/epd/p/id/3709
Espero que solucione tu problema, estoy para servirte.
Luis Guizar
Applications Engineer
National Instruments Mexico

RMAN new Setup Fails 11g ERRor Creating Control Backup file

Rman> rman catalog=rman/****@rman.respecti.inc target=sys/*****@rac1_serv.respecti.com
Recovery Manager: Release 11.1.0.6.0 - Production on Sat Apr 4 23:29:04 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: RAC (DBID=2269761839)
connected to recovery catalog database
RMAN> create catalog tablespace rmantbs;
recovery catalog created
RMAN> register database;
database registered in recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03008: error while performing automatic resync of recovery catalog
ORA-01580: error creating control backup file /u02/oradata/RMAN/snap_proactive.f
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
RMAN>
I've dropped the catalog and re-created it and continue to encounter this issue.
File '/u02/oradata/RMAN/snap_proactive.f' does not exist though the directory exist and is writable.
No luck with Metalink.
Appreciate recommendations on resolving this issue. Thanks

From RMAN Server (dgrac.respecti.inc)
RMAN> configure snapshot controlfile name to '/san/shared_data/RMAN/snap_proactive.f';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of configure command at 04/05/2009 19:07:20
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 04/05/2009 19:07:20
ORA-01580: error creating control backup file /u02/oradata/RMAN/snap_proactive.f
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
RMAN> resync catalog;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of resync command on default channel at 04/05/2009 19:07:32
ORA-01580: error creating control backup file /u02/oradata/RMAN/snap_proactive.f
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
From RAC1 node
RAC1> pwd
/san/shared_data
RAC1> ls -lt
total 20
drwxr-xr-x 2 rac dba 4096 Apr 5 18:41 RMAN
drwxr-xr-x 2 rac dba 12288 Apr 5 15:42 ARC
drwxr-xr-x 3 rac dba 4096 Mar 19 19:09 RAC
RAC1>

Why does iTunes create disk errors when deleting movie files?

I use a Macbook Pro, OSX 10.7.5. When I delete movie file from my iTunes library I get disk errors. I need to option boot select the recovery disk and repair the disk. Deleting a movie file I have placed on my desktop with finder does not create any errors. Most of the movie files are created as .m4v movies. They all play just fine with my Apple TV. I have tried turning off the Apple TV and rebooting before I delee files but nothing seems to work.
Any ideas?
Lance

If you let iTunes organise your media folders then that is the way it is. An option would be to change the Media Kind to TV Show which would gather them togther in one folder, but in a different part of the library.
tt2

Can't create a movie file (wmv)

Whe I try to create a wmv file the process freezes and eventually gives an error message saying the file cannot be created. Then it closes the program.

Which version of PSE you are on?
Please try the troubleshooting steps mentioned here : http://kb2.adobe.com/cps/408/kb408940.html
As a first step, you can try running Organizer directly from its exe in c:\program files or program files x86\adobe\elements organizer Ver\PhotoshopElementsOrganizer.exe by right clicking it >> run as Admin. Now try taking slideshow output. Keep all background processes turned off from Edit >> Pref >> Media Analysis, while taking output.
Thanks
Andaleeb

Error creating the air file

Hello,
this is my first time Air Trial:
Using a simple Webpage (including Text, one jpeg and one gif-file, I tried to creat an air file, using the air extension in dreamweaver CS4.
Following the instruction I made up the air application & installer setting, created my Cert-File and so on.
Preview looks perfect.
But when I try to create the Air file I get this:
unexpected failure: null
java.lang.NullPointerException
at com.adobe.ucf.UCF.addFileOrDir(UCF.java:358)
at com.adobe.ucf.UCF.parseOptionalFileList(UCF.java:284)
at com.adobe.ucf.UCF.parseFileArguments(UCF.java:271)
at com.adobe.air.ADT.parsePackageOrPrepare(ADT.java:199)
at com.adobe.air.ADT.parsePackage(ADT.java:156) at com.adobe.air.ADT.run(ADT.java:101)
at com.adobe.air.ADT.main(ADT.java:38)
What to do?
rgds
jack

Hello,
I feel stuck. I tried everything, incl. various Lessons but still get this error.
Could it be that I am using Air 1.5.2 but the older extension for dreamweaver 1.5.8.?
If this is the cause, when will the extension be updated??
I also read about possible certification problems. How can I check that?
DW Air Extension doesn't support it.
rgds
Jack

How to create editable .mov files from After Effects

Hi,
I am creating videos for my clients using after effects.
The requirment is that they should be able to edit the .mov files e.g adding their company name, text or logo without using after effects without losing any effects.
How can I accomplish this?
Thanks....

Unfortunately,
1.Baljeet S. Juneja,
Jun 18, 2012 1:36 PM in reply to leesando
Report
Editing video is not possible with Photoshop Elements.
Photoshop Elements is for photo editing
In order to edit videos , you should use Premiere Elements or Premiere Pro
However, Adobe does offer a combined package of Photoshop Elements and Adobe Premiere Elements, which might work perfectly for someone who just needs the most basic tools for editing both photos and video.

Error creating swf movie file

Similar Messages

Maybe you are looking for