Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...
Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
Shankar
HI,
whats the message class, message number?
BR Christian
Similar Messages
-
Funds mngt - Number range 01 not found for object BULI_DOCNR
Hi all
need some urgent help to crack an error am getting while creating a budget in funds management.
the error am getting is
"Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
I have maintained the number range in
Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
But am still getting the error....
will really appreciate some help on this
thanks in advanceThe number range object refers to "FM budgeting line item number "
Are you using Former budgeting or BCS ?
Try t-code- ok11 and ok91 under former budgeting.
Thanks
Siva -
Distribution KSV5 dump: K5 011 ERROR IN COIOB MISSING BUKRS FOR OBJECT
Hi All,
Have you met following short dump whenever? It apears during distribution cycle run in update mode? Unfortunately I am not able to find any OSS Notes that could fix it:
Short text of error message:
Błąd ERROR IN COIOB MISSING BUKRS FOR OBJECT KSPL01IV1330
Technical information about the message:
Message classe...... "K5"
Number.............. 011
Variable 1.......... "ERROR IN COIOB"
Variable 2.......... "MISSING BUKRS"
Variable 3.......... "FOR OBJECT"
Variable 4.......... "KSPL01IV1330"
Thanks,
Rafał S.You should maintain the field control for distributions
for the company code.
Please use transaction:
KCIV
Table CCSS Structure for General CO Fields
Field BUKRS Company Code
Allocation type Distribution
Actual/plan Actual and Plan
Here you should set the field:
NSFLAG -> D always: unique or table field
br, Guido -
CS4 internal error 11 Media not found, for menus?
Hi,
I have been attempting to burn blu ray with menus from the Encore Library. I keep getting an error when the motion menus are being rendered at the beginning of the disk build process. The error makes reference to the menu at hand and an "Internal Error 11" Media not found. I tried changing menus and I even tried leaving out the chapter selection menus so that there were no "animated buttons". I am not sure what to do, maybe Ill try reinstalling the encore library. I know that I have to go to bed for now and I will not have time to work with it until around 5pm.. Does anybody know what is going on here?
Windows 7 Pro
Intel i7 920 2.66Ghz
6Gb Triple Channel DDR3 1600mhz
ASUS P6T Motherboard
BFG inVidia geForce 260GTX OC
MOTU 896mk3 audio interface on a dedicated PCI-E 1394 card with TI Chipset
Delta 1010 PCI audio interface
LG 8X BluRay Internal BurnerShouldn't be a library problem.
Did you apply many "corrections" to the project?
If yes, try to clear all the files kept in "AuthorScriptHDMVSessions" folder (your Encore project folder\"name of the project"\AuthorScriptHDMVSessions).
You can clear all the .xmp files in your Encore project folder.
When you'll re-run Encore, it will take more time to re-built missed files, but everything will be cleaner.
Hope this helps
Ciao
Giorgio -
Number range interval not found for object ISH_NLEI in executing NP38
Dear ALL,
In executing Transaction NP38 when we save the surgical procedure codes the system
generates an error message "number range interval not found " . The object referred here
ISH_NLEI number range has already been defined in spro Define technical number range.
Please assist what should be done here to resolve the problem.
Regards
RamitHi, check if it maintained in tcode snro for this object
-
Error 7: File not found for executable
Hello all,
I have a problem with a VI server call. I am currently using LV 2011 on Windows 7. Here's the problem - I have a subpanel in a larger VI into which I drop the interface of a (potentially) stand-alone VI. The path to the called VI is good (in both the exe and in the development application). However, I am getting an error 7 when I try to use the "Open Config Data.vi". More specifically, I am getting the description that it can not find the VI in the library Load.vi (called by Open Config Data). I have tried specifically adding the whole config library into the build, but this does not seem to help. Also, the config VIs are called in the main application with no problem. Does anybody have any thoughts?
Thanks, Matt
Matt Richardson
Certified LabVIEW Developer
MSR Consulting, LLC
Solved!
Go to Solution.OK - so maybe my description was not so great. First - I know that the file paths are good because when they are not, the VI run dynamically in the subpanel via a VI server call will not load (there will be nothing in the subpanel). In this case, it loads and is running (can check this through debugging). Second, the error is occurring in both the exe and in the development system. The absolute path (although this is not an issue - see previous comment) is not possible given that this is built into an installer and deployed on other platforms (on which the directory structure is not necessarily duped). And finally, the VI that is loaded dynamically is already in the "always included". I don't have a problem calling and running this VI, the error crops up when I attempt to use "Open Config Data.vi" in that is called by that VI. This VI that is not loading (Load.vi) is located in the NI library NI_LVConfig.lvlib (located on the disk under the folder vi.lib). I currently have a workaround for this, but it is not the best (a pop-up dialog comes up that allows the user to configure everything from the UI rather than from the config file).
One thing that may help that I neglected to mention is that, in the development environment, I can run the calling VI one time and I get the error. However, in subsequent runs, I do not get the error.
Thanks for all of your responses. I hope this further explanation helps.
Cheers, Matt
Matt Richardson
Certified LabVIEW Developer
MSR Consulting, LLC -
Hi Anuj & All,
I'm trying to create an outbound scenario with EDIFACT-D96A-ORDERS. A simple SOA composite application polling data from DB and through B2B adapter 'send' option provides data to B2B system.
Set up two partner profiles like this,
Host:
Name: HTP
EDI Group ID: HTP
EDI Interchange ID: Interchange Sen
EDI Interchange ID Qualifier: 01
Remote:
Name: RTP
EDI Group ID: RTP
EDI Interchange ID: Interchange Rec
EDI Interchange ID Qualifier: 01
Other settings are as usual. Delivery channel of generic file created on RTH.
Now, few documents settings on B2B console are like this,
D96A-> Interchange tab
Create UNA: Never
ORDERS-> Transaction
Functional Group Identifier Code: ORDERS
Controlling Agency: UN
- other properties are unchanged.
On SOA side, the bpel invoke activity which calls B2B adapter has following properties:
<invoke name="InvokeOrders"
inputVariable="InvokeOrders_send_InputVariable"
partnerLink="D96A.ORDERS" portType="ns2:send_ptt"
operation="send" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="b2b.toTradingPartnerIdType"
expression="'NAME'"/>
<bpelx:inputProperty name="b2b.toTradingPartnerId"
expression="'RTP'"/>
<bpelx:inputProperty name="b2b.messageType" expression="1"/>
<bpelx:inputProperty name="b2b.messageId" variable="messageID"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerIdType"
expression="'NAME'"/>
<bpelx:inputProperty name="b2b.fromTradingPartnerId"
expression="'HTP'"/>
<bpelx:inputProperty name="b2b.documentTypeName"
expression="'ORDERS'"/>
<bpelx:inputProperty name="b2b.documentProtocolVersion"
expression="'D96A'"/>
<bpelx:inputProperty name="b2b.documentProtocolName"
expression="'EDIFACT'"/>
<bpelx:inputProperty name="b2b.documentDefinitionName"
expression="'ORDERS_def'"/>
<bpelx:inputProperty name="b2b.conversationId"
variable="ConversationID"/>
</invoke>
The error I'm getting on B2B Console->Reports->Business Message, while running this is,
Error Code B2B-50547
Error Description Machine Info: (htp01310-vm01.htp.com) Description: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
Note: On Manage Deployment Tab I've checked the agreement is in active state.
-- Business Message (Result):--
State: MSG_ERROR
Document Type: ORDERS
Agreement: <blank>
Sender: HTP
Receiver: <blank>
-- Application Message (Result):--
Sender Id Type: NAME
Sender Value: TCS
Receiver Id Type: NAME
Receiver Value: ORCL
Document Type: ORDERS
Document Definition: ORDERS_def
Document Protocol Name: EDIFACT
Document Protocol Version: D96A
Direction: OUTBOUND
State: MSG_COMPLETE
- Can anybody please shoot some pointer on how to resolve this? Please let me know if you need further configuration details which I've not mentioned here.
Regards,
- @bhijitHi Mariusz,
Thanks for your reply. Yes I think so, probably you're right. But finest trace level doesn't give much clues on "wrong mapped" data. Anyway, here is the detail log. Please don't forget to point out if you find something interesting.
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704092> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
#### <Error> <oracle.soa.b2b.engine> <htp01310-vm01.htp.com> <soa_server1> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
> <<anonymous>> <BEA1-0D3F5ABAC0B2E50C6CCB> <449b4b64fa2729cc:59737e36:146f08831ee:-8000-0000000000127da6> <1404379704569> <BEA-000000> <Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50547: Agreement not found for trading partners: FromTP HTP, ToTP null with document type ORDERS-D96A-OUTBOUND.
at oracle.tip.b2b.tpa.RepoDataAccessor.queryAgreementMO(RepoDataAccessor.java:887)
at oracle.tip.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:415)
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:465)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:224)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1555)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:819)
at oracle.tip.b2b.engine.Engine.outgoingContinueProcess(Engine.java:4100)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3921)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3309)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:637)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
Rgds,
- Abhijit
P.S. - Can you please check what is the value of "Functional Group Identifier Code" for D96A ORDERS. -
Struts class not found for war file
Hello,
I am tring to deploy my struts web application in weblogic 8.1. I have all the
library files in web-inf\lib directory. It gave me the error that class not found
for some class in struts library. The console also told me the classpath. But
I can use javap to find the class using the same classpath. Could any one point
me some direction what I am doing wrong here.
Thanks.
Here is the error message:
java.lang.NoClassDefFoundError: org/apache/commons/beanutils/Converter.>
<Nov 13, 2003 11:05:29 AM EST> <Error> <HTTP> <BEA-101216> <Servlet: "action"
fa
iled to preload on startup in Web application: "voppocWebApp".
javax.servlet.ServletException: [HTTP:101250][ServletContext(id=9921725,name=vop
pocWebApp,context-path=/voppocWebApp)]: Servlet class org.apache.struts.action.A
ctionServlet for servlet action could not be loaded because a class on which it
depends was not found in the classpath C:\bea\weblogic81\server\bin\myserver\upl
oad\voppocWebApp.war;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extrac
t\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\activation30425.jar;C:
\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp
_voppocWebApp\jarfiles\WEB-INF\lib\commons-beanutils30426.jar;C:\bea\weblogic81\
server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\ja
rfiles\WEB-INF\lib\commons-collections30427.jar;C:\bea\weblogic81\server\bin\.\m
yserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF
\lib\commons-digester30428.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdel
ete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\commons-file
upload30429.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\mys
erver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\commons-lang30430.jar;C:\be
a\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_vo
ppocWebApp\jarfiles\WEB-INF\lib\commons-logging30431.jar;C:\bea\weblogic81\serve
r\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfile
s\WEB-INF\lib\commons-validator30432.jar;C:\bea\weblogic81\server\bin\.\myserver
\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\ja
karta-oro30433.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\
myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\jdbc2_0-stdext30434.jar;
C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebA
pp_voppocWebApp\jarfiles\WEB-INF\lib\mailapi30435.jar;C:\bea\weblogic81\server\b
in\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\W
EB-INF\lib\struts30436.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\
extract\myserver_voppocWebApp_voppocWebApp\jarfiles\_wl_cls_gen.jar.
java.lang.NoClassDefFoundError: org/apache/commons/beanutils/Converter.
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:800)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppS
ervletContext.java:3236)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebApp
ServletContext.java:3181)Hello Mark,
Your suggested solution (putting an empty commons-logging.properties into
web-inf/classes or in a jar in web-inf/lib)
does not make any change at all. It still complains about not being able to
preload the servlet and still
gives exceptions upong calling upon LogFactory.
What I have been able to do is put the three classes from
com.bea.wlw.netui.util.logging into a separate jar
and add that to web-inf/lib.
However I am sometimes getting funny exceptions upon undeploy
(NoClassDefFoundError for org.apache.commons.collection.FastHashMap$KeySet).
Regards,
Robert Varga
"Mark Griffith" <[email protected]> wrote in message
news:[email protected]...
From a FAQ on netui:
1. Why do I get a ServletException while trying to deploy a struts web
application on a Workshop/Integration/Portal domain?
In the "<WL-HOME>/server/lib/knex.jar" file there is a properties file
called "commons-logging.properties" which configures the
com.bea.wlw.netui.util.logging.StrutsLogFactory class for Struts loggingas
below:
org.apache.commons.logging.LogFactory=com.bea.wlw.netui.util.logging.StrutsL
ogFactory
This class file is not available for a Struts web application that was not
built using Workshop, the reason being the containing NetUI jar files are
not present in the web application's WEB-INF/lib folder. This leads to a
ServletException while deploying the web application. The solution is toadd
a blank file (or a JAR containing the file) namedcommons-logging.properties
to the server CLASSPATH, or to the WEB-INF/lib folder of the concerned web
application. This issue will be fixed in Service Pack 2.
cheers
mbg
"Robert Varga" <[email protected]> wrote in message
news:[email protected]...
Hi Rob,
I also have a similar error with deploying a Struts web application into
a
8.1 Basic Workshop Domain created
by 8.1 Platform.
I get a ClassNotFoundException for 'com.wlw...StrutsLogFactory', whenStruts
tries to load any Jakarta class
from commons-beanutils or Struts which has logging.
This happens because commons-logging picks up some property whichinstructs
it to load that class, which is
naturally not included in most web applications, since it is
workshop-specific. This property definition, I think,
is in <bea>\weblogic81\server\knex.jar, called
commons-logging.properties,
containing the following line:
org.apache.commons.logging.LogFactory=com.bea.wlw.netui.util.logging.StrutsL
ogFactory
How can I override this in my webapp in a property file, so that when a
Struts or Beanutils class calls
LogFactory.getLog(org.apache.....<classname>.class), it would not try touse
the property file and the
class defined in knex.jar.
Thanks in advance,
Robert Varga
"Rob Woollen" <[email protected]> wrote in message
news:[email protected]...
Actually it complained about a NoClassDefFoundError. Generally this
is
caused by something in a parent classloader that is found but then
depends on something only loadable in a child classloader.
eg.
You have something in your $CLASSPATH that references something in the
WEB-INF/lib. This will NoClassDefFoundError.
So, as I recommended, remove everything you've added to the$CLASSPATH,
add the jars to WEB-INF/lib. If you're still having problems, show me
your $CLASSPATH, the contents of WEB-INF/lib, and the error message
/stack trace.
-- Rob
yuruo chen wrote:
Hello, Rob,
I did put the common-beanutils and other jar files in the
web-inf/lib
directory.
And from the weblogic console, I do see the jar file get included in
the
classpath.
(those generated file name have some number attached at the end.)
As
I
mentioned
before, I can use javap find the class using this weblogic generatedclasspath.
But weblogic complained that the class is not found.
Rob Woollen <[email protected]> wrote:
Remove anything you've added to the server's classpath.
Add the required jar files to WEB-INF/lib
-- Rob
yuruo chen wrote:
Hello,
I am tring to deploy my struts web application in weblogic 8.1. I
have
all the
library files in web-inf\lib directory. It gave me the error that
class
not found
for some class in struts library. The console also told me the
classpath.
But
I can use javap to find the class using the same classpath. Could
any
>>>>>
one point
me some direction what I am doing wrong here.
Thanks.
Here is the error message:
java.lang.NoClassDefFoundError:
org/apache/commons/beanutils/Converter.>
<Nov 13, 2003 11:05:29 AM EST> <Error> <HTTP> <BEA-101216>
<Servlet:
>>>>>
"action"
fa
iled to preload on startup in Web application: "voppocWebApp".
javax.servlet.ServletException:
[HTTP:101250][ServletContext(id=9921725,name=vop
pocWebApp,context-path=/voppocWebApp)]: Servlet classorg.apache.struts.action.A
ctionServlet for servlet action could not be loaded because a classon which it
depends was not found in the classpath
C:\bea\weblogic81\server\bin\myserver\upl
>
oad\voppocWebApp.war;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extrac
>
t\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\activation30425.jar;C:
>
\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp
>
_voppocWebApp\jarfiles\WEB-INF\lib\commons-beanutils30426.jar;C:\bea\weblogic81\
>
server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\ja
>
rfiles\WEB-INF\lib\commons-collections30427.jar;C:\bea\weblogic81\server\bin\.\m
>
yserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF
>
\lib\commons-digester30428.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdel
>
ete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\commons-file
>
upload30429.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\mys
>
erver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\commons-lang30430.jar;C:\be
>
a\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_vo
>
ppocWebApp\jarfiles\WEB-INF\lib\commons-logging30431.jar;C:\bea\weblogic81\serve
>
r\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfile
>
s\WEB-INF\lib\commons-validator30432.jar;C:\bea\weblogic81\server\bin\.\myserver
>
\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\ja
>
karta-oro30433.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\
>
myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\jdbc2_0-stdext30434.jar;
>
C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebA
>
pp_voppocWebApp\jarfiles\WEB-INF\lib\mailapi30435.jar;C:\bea\weblogic81\server\b
>
in\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\W
>
EB-INF\lib\struts30436.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\
extract\myserver_voppocWebApp_voppocWebApp\jarfiles\_wl_cls_gen.jar.
java.lang.NoClassDefFoundError:
org/apache/commons/beanutils/Converter.
atweblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:800)
atweblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppS
ervletContext.java:3236)
atweblogic.servlet.internal.WebAppServletContext.preloadServlets(WebApp
ServletContext.java:3181) -
ManagedConnectionFactory not found for jndiName SquareConnector
Im trying to access a Connector I wrote and im getting the error:
<190004> ManagedConnectionFactory not found for jndiName SquareConnector
The rar package is exactly the same as one in an ear package that works.
I have this one as a standalone Adapter on a separate server(on port
7101) and am trying to access it from my main server on port 7001. Why
am i getting this error.
Ivan
Im trying to access a Connector I wrote and im getting the error:
<190004> ManagedConnectionFactory not found for jndiName SquareConnector
The rar package is exactly the same as one in an ear package that works.
I have this one as a standalone Adapter on a separate server(on port
7101) and am trying to access it from my main server on port 7001. Why
am i getting this error.
Ivan
-
Time constraint not found for A1001 B007
Hi all,
I have created a role and assigned users to the role and created a workcenter in Po01. While assigning the workcenter to the role, its giving a error "Time constraint not found for A1001 B007". I have checked the start date of workcenter is greater than the start date of the role. Please let me know, any config. needs to be done.Hi!
Check in table T777Z in SM30 or SM31, you will see the time constraint for B007 has not maintained
Simply add new entry and fix it. Then you can get rid of this error!
Regards! -
Error in allocating Excise inv no Interval not found No object J_1IEXCLOC
Hi, When I try to execute J1IV, I am getting the below error:
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
All number ranges are maintained for the above object. Please let me know, whether anyone encountered the same situation and how to resolve the same.
Regards
SureshHi,
Please check in SNRO as you allocated no range for J_1IEXCLOC object for your series group & check for J_1IARE3 object also for same series group.
regards -
Error in allocating Despatch serial number Interval not found Number object
Hi All,
While saving the Excise Invoice(created w.r.to Invoice) in J1IIN system is throwing the error:
"Error in allocating Despatch serial number Interval not found Number object J_1IINTPR2
Message no. 8I336"
The Excise Group(say 99) was created.
But the same is not reflecting in the drop down list of SNUM for maintaining the No.Range in the Object J_1IINTPR2.
Do the needful to resolve this issue.
Needless to say helpful answers will be rewarded.
Regards,
Raj Kumar Reddy.Dear Raj,
Go to Excise group details here you check these settings
IMG>Logistics general>Tax on Goods movements>India>Basic settings-->Maintain Excise groups
Have you check all these check boxes
1.Excise Inv during billing
2.Create and Post Invsingle step
3,Depot Excise invoice
4.EI capture
5.Diuty Different at GR
6.EI create/RG23D selection
7.Update RG1 at MIGO
I hope this will help you,
Regards,
Murali. -
Director Player Error : Handler not found in object
Hi,
I have made an exe to run a video in Director. This was done using old version of director, 8.5 supposedly.
When i try to run video through this exe, the video plays in background but i get the following error(snapshot attached):
"Handler not found in object
# openport
Script Error. Continue?"
I have installed shockwave player 8.5 and also put all the files from xtra folder to the folder where exe in lying but still i am getting the same error.
Any help will be greatly appreciated.Looks like something in one of the scripts in your project that is being called but is not working correctly for some reason.
Without seeing the code it's hard to tell what the problem may be. I'm wondering if there's one of the old-style line continuation characters that may be breaking the #openport handler somewhere in your scripts. -
Entry not found in object buffer error in leasing quotation
i am getting following error in SAP CRM 7.0 in quotation level.
when i am entering financing product in quotation.
Item 200 Entry not found in object buffer @5F\QNo long text exists@ Dates Administrator
Item 200 Entry not found in object buffer @5F\QNo long text exists@ Administratorthank for your reply
At least we found out message class of this message.
From your given Function module we could identify that it giving information message, but we are experiencing error of object buffer related message.
In error it showing sub object as "Dates", can you please guide us to elaborate this further.
Regards,
Vikil -
Getting error : " not found Number object J_1IDEPINV "
Hi SAP Expert,
When I am posting Excise Invoice at Depot using J1iJ, i am getting the error : " Error in allocating Depot Invoice number Interval not found Number object J_1IDEPINV " when trying to Save.
Already checked that I have maintained the number range for object J_1IDEPINV in J1i9 for my series group. But I am still getting the same error. Any clue ?You would have maintained the number range for the required series group but ensure that it is maintained for the current year.
thanks
G. Lakshmipathi
Maybe you are looking for
-
I tunes no longer works on my computer. I've tried reinstalling it, uninstalling it, and system restore, to no avail. I use windows xp, and get error message 7.
-
ATV2 (720P) Fatal Brick After Update
I attempted to install the ATV 6.0 update yesterday, and encountered the same "brick" issues others here have reported. After the update, the only thing that worked on my ATV was the front panel LED light, as it blinked constantly. Since I didn't hav
-
Create STO with order unit of measure
Hello, Is there a way to create Plant to plant STO with ordering unit of measure? Based on our customization we are not able to use Unit of issue from supplying plant and we also cant have base unit of measure in the STO. Any help will be greatly app
-
Selling my iPad 2, steps involved to save my apps and factory restore it?
Hey, I'm selling my iPad 2 to finance iPad 3, can someone please explain what should I do so that all my apps/data/photos are backed up to my iTunes, and a way to factory restore it so that the new owner will have no access to my personal stuff? Than
-
Dear all; I have created one pricing procedure for STO as below : step countour Condition type from to Acc Accr 50 0 P101 Val.Price Supply.