Error CRM_PRODUCT_SALES010 on Material Download
I am currenlty testing the CRM material download from ERP to CRM, this from an ECC 5.0 system to CRM 5.2. For each new material I create or edit, the processing of the BDoc fails. I get the error message ".CRM_PRODUCT_SALES010 - Sales organization 50000608 does not exist", even though the sales org does exist However, if I re-process the BDoc it posts correctly.
Has anyone seen this before? I can find no differences between this system and another system we have where all the BDocs process normally without error. I have checked RFCUSER in both systems and see no differences. I suspected that something might me missing from the customization download but don't see that either. It appears that when RFCUSER processes the BDoc we get this error, but when I reprocess it we do not. Would anyone have any idea what to check here? Something must be missing but I cannot determine what it is.
Hello,
This is the typical RFC user authorization problem. The RFC user doesn't have authorization to read the organizational model. Run a RFC trace (ST01) for the user and repeat the action that results in a failed BDOC. Then check the authorization log, you'll see some failed authorization checks (RC=12).
Why does the BDOC process succesfully when I process it then?? you're probably wondering
Well, very easy answer, when you reprocess the BDOC it's processed under your username and your authorizations and they are clearly sufficient to process the action.
Good luck,
Joost
Similar Messages
-
Hello Experts,
I am facing typical material download issue, please help me out to overcome this:
- material number in ERP has lot of speical characters say e.g. - : =
- DNL_CUST_PROD0 / PROD1 / PROD 3 / TAX all has bee done
- Materials are already downloaded
- When I tried to download new materials from ERP to CRM(missing) I am getting error: as "Mat. for Initial Download: Function table not supported" ; additionally I am also getting tax sequence for country CA, but in ERP no tax classification maintained for CA for particular material. Also no data available in TSTL, TSKD etc..tables.
Pleas let me throw your thoughts here.
Cheers,
BobbyHello Bobby,
Corrections present in note:1121999 was due to program error.
Did tax customizing error still present?Did you run txn:CRM_TAXCUST_VALIDATE.
Check the error tab of the Bdoc and see can you get any hint?Also,does the BDoc contains Data or its blank?
Its very difficult to know the cause unless having look into the system and debugging the issue,
Regards,
Shanthala Kudva. -
I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irfhi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM -
Error while posting material using transaction code MB1C
Hi Experts,
While I am trying to post material into warehouse its giving warning message initially as : MAT IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
MESSAGE NO: M7133
Diagnosis
Material is a missing part of plant
when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
MESSAGE NO: L9023
All the materials that you use within a warehouse no must also be defined for this warehouse no.
Can Any one please explain me how to resolve this error in detail.
Thankyou
SAHERDear Siraj,
I have extended the material to warehouse numbers as you suggested. Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
MESSAGE: L9009
Thank you,
SAHER. -
I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?
Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314 -
My iPod 4th Generation does not let me download iOS 6.1.1...
The reason I want 6.1.1 is because I want to download kik and a load of other apps but I need 6.1.1.
The message is "Error. Unable to download iOS 6.1.1" or something, and I have no idea what it means or how to fix it because I know barely anything about the apple software things.
I've read a few things about it and discovered that this issue is common, but I can't get the answer I need, and the other posts about this issue were made like two years ago. I've got enough space, definitely, and last night it was downloading it so I put it on the charger and went to sleep, when I woke up it said "Cannot download. Internet connection is required." something like that. I had no issues last night, but now it's saying it cannot download.
Can someone please help?
I've not updated my ipod for a year or so now, but I'm still not sure why it's not working.
Thanks so much!
PS: I currently have ios 5 point something.You have to have an internet connection, either wireless or through a computer with iTunes. When you choose Software Update you can only update to the latest version for your iPod Touch, iOS 6.1.6
-
HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.
I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Background job finishes but error Error While Updating Material into Standard SAP5678
Dear
we run background job which finishes successfully but when we sqw logs it shows
Error While Updating Material into Standard SAP5678
Kindly share the reasons
RegardsThis is an ERP Upgrade space and you should consider raising threads in the right space for prompt replies. Next time consider using SAP NetWeaver Administrator space for issues like these. Also you should consider closing your previous thread with the correct answer for future reference.
What I see is a custom job. You should check what the job does and also the trace file of the work process and the consult with the application team or the developer for more information. Unfortunately with that screenshot there is nothing much we can advice you.
Regards
RB -
Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
SukumarHello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß -
Propagation error when trying to download inventory from server
Hi there,
Has anyone seen the following error when trying to download an inventory from the server.:
Buildfile: C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml
import:
BUILD FAILED
C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml:39: The propagation servlet returned a failure response: The [Download] operation is halting due to the following failure: null
Additional Information:
The propagation servlet returned the following log information found in [C:\DOCUME~1\myuser\LOCALS~1\Temp\onlineDownload__D21_H11_M8_S11.log]:
INFO (Oct 21, 2009 11:08:11 AM SAST): Verbose logging has been disabled on the server.
INFO (Oct 21, 2009 11:08:11 AM SAST): The propagation servlet is starting the [Download] operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): Validating that current user is in the Admin role...SUCCESS
ERROR (Oct 21, 2009 11:08:11 AM SAST): Validating that Maintenance Mode is enabled...FAILURE
ERROR (Oct 21, 2009 11:08:11 AM SAST): Maintenance Mode has not been enabled on the server. With Maintenance Mode disabled it is possible for users to modify the application. This may cause problems for propagation.
WARNING (Oct 21, 2009 11:08:11 AM SAST): Because the modifier [allowMaintenanceModeDisabled] was enabled this validation failure will be ignored and the operation will proceed. However, users will still be able to make modifications to the application, which could lead to missing data and unexpected propagation errors.
WARNING (Oct 21, 2009 11:08:11 AM SAST): The temporary directory on the server used by propagation is [portal/bea10.3/user_projects/domains/RSTDomain/servers/wl_nstf/tmp/_WL_user/RSTEar/7v9j6d/public] with a length of [99] bytes. It is recommended that you shorten this path to avoid path length related failures. See the propagation documentation on how to specify the inventoryWorkingFolder context-param for the propagation servlet.
INFO (Oct 21, 2009 11:08:19 AM SAST): Validating that LDAP and RDBMS security resources are in sync...SUCCESS
INFO (Oct 21, 2009 11:08:19 AM SAST): Writing the inventory file to the servers file system at [{0}].
ERROR (Oct 21, 2009 11:08:23 AM SAST): The [Download] operation is halting due to the following failure: null
Total time: 14 seconds
Please let me know if you have any ideas because "The [Download] operation is halting due to the following failure: null" means nothing to me.
Please note changing the maintenace mode makes no difference.Please enable Verbose Logging on the propagation servlet
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propToolAdvanced.html#wp1071690
and check the logs on the server, they might give a clue -
Error message is 'The Request Error : 400' with SAP Download Manager
Hello,
The authorization object SWDOWNLOAD (download software) is assigned to the My user ID.
But I could not download below that file.
SAP_ABA 710 (4~8)
SAP_BASIS 710 (4~8)
PI_BASIS 2006_1_710 (4~8)
SAP_BW 710 (4~8)
Error message is 'The Request Error : 400' with SAP Download Manager
I logged on to SAP Service Marketplace, software download area /swdc.
I have created objects in the download basket and have received approvals (->Maintenance-Optimizer) where required.
I start the SAP Download Manager and the objects from the download basket are visible in the object list of the program window.
After I choose "Objects for Download", the system starts the download.
In the info-line (in the lower part of the window), the system displays the message 'Processing object...' and then 'The request failed: 400'.Hello,
In these cases the following things should be checked:
1.- Please be sure that you are using the latest Donwload Manager version
2.- S-User and password should be active
3.- Specify the proxy. Please refer to SAP Note 155954
4.- It might be that you are not licensed for the product you want to download.
If the checkings above are correct and the problem is still alive, I would recommend you to open an SAP customer message under component XX-SER-SAPSMP-SDM providing the following information:
1.- The exactly software product name and package or stack number you try to download.
2.- Attach to the message the results of the trace file generated as per note 574885:
574885 - Download Manager: Generate trace file for analysis
I hope this helps you.
Regards,
Blanca -
Get error message 2753 to download to Lightroom 3.6
Error messagr 2753 when downloading Lightroom 3.6
jbpoby for the best assistance, I recommend our chat support at http://adobe.ly/tl8Vx7. Our chat representatives can provide a personalized experience to resolve the issue you have described.
-
Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.
Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.
-
Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone else??
Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone else??
-
Material download to CRM from R/3
Materials created in R/3 are downloaded via the MBDoc PRODUCT_MAT . In this BDoc there is a structure called COMM_PROD_VAR whose description says variant data.
The same structure is present in SBDoc as PRDCT_OBJECT. In this the segment CUCFG with it dependent segments are linked to configuration.
Any idea of when these segments CUCFG in bdoc PRDCT_OBJECT or structure COMM_PROD_VAR in BDoc PRODUCT_MAT get filled when data is downloaded from R/3.
Would be grateful if you could share your knowledge.
Thanks
Middleware developerHi Krish,
check the <a href="http://help.sap.com/saphelp_crm50/helpdata/en/46/6d7f089ecfb5459a46c734da4dc575/frameset.htm">Link</a> Have a look of the point 3 in the Prerequisites. This will tell you what all objects needs to be downloaded before the Material download.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Maybe you are looking for
-
How can I get the total "values" in a hashtable ?
i know that i can get the total values in a hashtable by hash.elements() method. It returns an enumeration with all the values present in this hashtable. this is fine upto here. Now the preoblem is: According to what rule this enumeration will be ret
-
To try and explain, i will select 'new playlist' and then go to the first artist i would like to add music from. I then select track X and add that to the playlist. I then go back and move to another, different artist. When i click to look at their t
-
Implication for keeping one Company Code
Hi All, Can some one give me implications or disadvantage of having one company code. The scenario I am doing rollout for Germany and Germany is having their branches in Spain, France, Sweden and Switzerland. Over here Germany is main office and all
-
HT201269 i want connect my ipod to the itunes
i want to connect my ipod to the itunes because its atomatically off and its show me to connect with itunes so plz would u help me////
-
Function to get a value interval
Hi all, anybody knows a functions which return a value interval. F.e I´ve a MinValue and a MaxValue. During runtime the MinValue could be 0 and the MaxValue 5. Now i´m lookiing for a method or a function module returning me an internal table with the