Error d124 Multi user calendar

Hello,
we moved all of our users from one PO to another, both GW2012SP2. When the users now open their multi user calendar they get the error "d124".
When i open the multi-user list in a users mailbox there are entries from the old po an the new po. I tried to remove the old entries by click the Name, click Remove User, click OK to save. When i re-open the list, the removed users dont appear. Now i closed the Client, start it again and all of the removed users are shown up again in the multi-user list...
Does anyone have an idea how to remove the user in the multi-user list permamently? Or have any GW Check options to solve this?
kind regards
Benjamin

In article <[email protected]>, Bmulfinger wrote:
> we moved all of our users from one PO to another, both GW2012SP2. When
> the users now open their multi user calendar they get the error "d124".
Moving in every sense of the term always leaves some loose ends like
this. This is why as much as possible we like to move POs and not the
users if we can avoid it. Basically some of the connectsions betweek
users broke because a bunch of them are still looking at the old PO, so
we need to work through those connections and fix them.
>
> When i open the multi-user list in a users mailbox there are entries
> from the old po an the new po.
In looking this up I found I had a user in my list that was no longer in
the system and I had the same behaviour in trying to deal with it. I
realized that this was only the users I have proxied into, so I went into
my proxy list, removed the offending user, and after a restart the
problem went away. So how many of these do you need to deal with?
Before we look at the specialized GWchecks, make sure you are running a
regular set of them and checking the resulting outputs for any errors
that might point you to parts of the cleanup.
http://www.konecnyad.ca/andyk/gwlogs.htm
Running through the TopDown rebuild (TID 3347260 at
https://www.novell.com/support/kb/doc.php?id=3347260) and selecting the
Rebuild Indexes after doing the other parts at those levels may help.
Afterwards an Analyze/Fix of Structure & Index would be useful, checking
the results to see if it reports problems. If there are such problems,
rerun again to see that they are gone.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Similar Messages

Multi User Calendar Display Issue

When we moved to GW2012 one of our departments that uses a Multi User calendar (5 users in total) noticed some strange display issues.
When User1 is looking at her Multi User Calendar, the client is displaying her appointments in User2's column as well. But if you look at User2's Multi User calendar, you don't see any of User1's appointments in User2's column, so it appears to be a display issue with User1. This same issue is happening with one other user.
All users are on Client 12.0.2, Build 108211 . Interestingly if we look at the calendar on a machine running the GW8 client this display issue does not occur. I have also gone as far as rebuilding the calendar from scratch but this hasn't changed anything.
Any suggestions?
Thanks!
Steve

Hi
If you open a Service Request with Novell Technical Services you will receive this Field Test File patch for the GroupWise 2012 Client. It is specifically to fix issues with multi-user calenders. Please let us know if you are in a position to open an SR.
Many thanks.
Cheers,

Multi user calendar in CRM

Question - does SAP CRM have a multi user calendar that all users can read change and make additions to, enabaling the sales manager to arrange sales meetings that do not conflict with sales reps appointments and holidays booked?

Hi Experts,
I have same problem. We create appointment in CRM 2007 and adding the other employees to this activity. When we add other employees to appointment, want to display employees calendar in selected time space. If his/her calendar is empty we can add, else we couldn't.
I searched this application in search engine and found the "Room Calendar". Could we use this application in CRM 2007 UI, if yes how?
Thanks,
David.

Shared calendar items in multi-user calendar view

Hi!
I have another question:
The new multi-user Calendar-view is great - but we have one thing, which
is confusing to our users:
User A has a shared calendar (the owner of this shared calendar is User
B). It is clear, that User A can see appointments of this shared
calendar in his "main Calendar" if this shared calendar is "enabled".
But User A cannot see the calendar items of this foreign shared
calendar, if he changes to the new multi-user - view.
Does this work as designed or is it a bug?
Thanks a lot
Wolfgang

Originally Posted by wpolster
Hi!
I have another question:
The new multi-user Calendar-view is great - but we have one thing, which
is confusing to our users:
User A has a shared calendar (the owner of this shared calendar is User
B). It is clear, that User A can see appointments of this shared
calendar in his "main Calendar" if this shared calendar is "enabled".
But User A cannot see the calendar items of this foreign shared
calendar, if he changes to the new multi-user - view.
Does this work as designed or is it a bug?
Thanks a lot
Wolfgang
Does User A also have read proxy rights to User B's calendar?
Also, which version/patchlevel of the client are you using?
Cheers,
Willem

Proxy for Multi User calendar shows user's folder tree

By giving the View proxy right to other users, so that they can utilize the Multi User calendar, this apparently also gives the user you've assigned that right to the ability to see the folder tree of all users that have given the View right to the user. In other words, by clicking on the Proxy icon at the top of your folder tree, and picking the user who gave you read rights to their appointments, you can see all their folders. Granted, you will only be able to see appointments within those folders. But, some users may assign descriptive folder names they might otherwise not want to be visible to others. Is there some way to hide the folder view, while still proxying the view right to appointments?
Thanks

Ok, Thanks - I'm satisfied as long as that's by design.
Originally Posted by dzanre
pagjsp wrote:
> right to the ability to see the folder tree of all users
> that have given the View right to the user
There is no way to hide this.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
Shopping Cart

No Multi-User Calendar in WebAccess

We are using GW 2012 and looking at the possibility of eliminating the client in favor of WebAccess for all users.
One issue that I've run into is that we cannot view multiple calendars via the multi-user function while in WebAccess. It works perfectly fine in the client.
When I log into my mailbox and click the calendar button, my only option under the "Calendars" box is "Calendar" which is my own. No others display. I can proxy, via WebAccess, into the other calendar with no issues.
I've looked through the threads here, and performed a few internet searches with no results. From the documentation it does appear that Multi-User is available, or supposed to be, when in WebAccess.
Our GW system (MTA, GWIA, WebAccess) is running on SLES10/OES2 with multiple post offices running on SLES10 or 11.
Thanks for any pointers you may have!
Michael

mprosise,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Video display errors with multi-user

Macbook Pro or Mavericks bug
10.9.3, MacBook Pro (Late 2010), MacBookPro6,2
When using the multi-user switching, the background image is distorted.
To recreate:
Establish user "B" with a background image on screen. I have three Spaces with three different images. All users logged out.
Login as user "A"
Login to user "B" using the Menubar to select the other user without logging out of user "A"
Note bar on right-hand side of screen and distorted colors.
User A has one of the Apple background photographs
User B has personal photographs from 8 MP camera
If user B is logged in from the Login Window then all is OK. Display issue only shows up when logging in from other user via fast user switching (or whatever that is called). If user B logs out and logs in again from the Login Window all is OK.

Can you post screenshots of the distortion, someone may recognize it.
What you describe sounds like one user as something running that doesn't work well with FUS (I think it's still called 'fast user switching' ).
You can disable all login items by holding alt as you click the login button. See if that has any effect. If it does you know you need to look at the users login items (in System Preferences > Users & groups). In not sure if the 'alt trick' works inside the fast user switching menu, so you may want to verify the flaw exists when going to the login window, then reboot & try the 'alt trick' with the same steps.
The other thing to try is using a background image that has been resaved via Preview's export (or another app). It's possible the file itself is a reason for the issue, do standard backgrounds do the same?

Error in multi user handling? Wallpaper error

Dear all,
my Mavericks (10.9.1) on a new iMac Core i7 with 3 TB Fusion Drive and 32 GB of RAM has a strange behaviour:
The background image of my desktop (user 1, admin) goes back to the default image (wave), if user 2 (non admin) was locked in before user 1 locked into Mavericks AND if user 1 locked in via the user switch in the menu bar on the right.
This does not happen, if user 2 locked out and after that user 1 locked in via the lock-in screen.
Has anybody the same problem and a solution to fix this?

I assume that the table in your update statement is the same table as the one you based your block on.
You are manually updating the table, and Forms see this as an update "by another user" (even though it's you). To see the changes you made in your update statement, you have to re-query.
So, don't update yourself, let Forms do it. If you base a block on a table, everything is done for you by Forms.

Multi-user streams replication error in 10gR2

hi, i am testing multi-user streams replication,using the following sql statement:
begin
dbms_streams_adm.maintain_schemas(
schema_names                     => 'hr,scott,ddup',
source_directory_object           => null,
destination_directory_object      => null,
source_database                => 'yjsh.oracle.com',
destination_database           => 'test1.oracle.com',
perform_actions                => true,
bi_directional                     => false,
include_ddl                     => true,
instantiation      => dbms_streams_adm.instantiation_schema_network,
SCRIPT_DIRECTORY_OBJECT => 'admindir',
SCRIPT_NAME => 'generated_schemas_script.sql' );
end;
all objects in scott,ddup were successfully replicated to target database.
but in hr schema,only EMP_DETAILS_VIEW was replicated to target db.
all other objects were not replicated.
and there was no error in alert.log and dba_apply_error.
sqlplus hr/hr@test1
HR > select * from tab;
TNAME TABTYPE CLUSTERID
EMP_DETAILS_VIEW VIEW
1 row selected.
anyone know how to resolve this problem?
Your feedback is greatly appreciated !

Hi
did you find a solution to your problem?I too have the same problerm. But what I understand is , When the driver fails to connect to the database due to wrong password or username, It repeatedly attempts to connect. So is there any way to restrict the number os attempts made by the driver?I guess Jconnect driver has some attributes to do this.Does someone know if there are any other drivers?

Delete other users' calendars - erroring out

I have access to 2 other users' Outlook calendars on my laptop. When I got a new machine recently, I connected iCal to my Outlook for the first time, and those other 2 users' calendars came along with mine. These people are horrifically busy and my calendar is now useless. When I try to delete these calendars, I get this error:
https://calendar.google.com/calendar/dav/<my email address>/user/ is not a location that supports this request.
I'm running OS X v 10.8.4
Please help me to delete this data. Many thanks in advance!

Ok here is the problem. When I delete a user using the imadmin user delete command it works great. However the imadmin user purge command does not work! When I try to use it I get the following errors:
[email protected]: purging user
[email protected]: purge user failed
Failed connection refused.
I know that it isn't an authenticate issue because that gives out a different error and the other imadmin commands work fine.
I have made the recommeded change in the resource.properties file that is talked about in the release notes for ida1.2sp1(i.e. change mailObject-allowPabDeletion=yes to =no and restarted the Enterprise server) and I still can not get this to work.
I can delete users using ldapdelete but it isn't 'sun recommended'... And it causes funny inconsitencies in the nda interface.
I checked the referential integrity plugin and it was not turned on, I think anything past patch iMSsp1 and it is disabled by default.
Is there some log that I could check and figure out why this is failing, or some sort of debug mode I could run the purge user command in??
Any help would really be appreciated.
Peter Severson

Error in setting up Multi-user RPD

Hi
I've managed to set up a local MUD RPD on my laptop for testing purposes. I am able to make updates and then check these into the shared RPD. However when trying to access the shared RPD I receive the message that I am only able to update the RPD in Read-Only mode.
What I want to know is have I missed a step in cecking the updates into the shared RPD which has left a lock on the shared RPD?
The following files are listed in the shared directory:
modified subset of shared_samplesales.001
modified subset of shared_samplesales.002
shared_samplesales.000
shared_samplesales.001
shared_samplesales.002
shared_samplesales.002.csv
shared_samplesales.mhl
shared_samplesales.rpd
Regards
Adnan

Hi
I may have the answer. I copied the file into a different folder and I was able to open the file in offline mode.
It seems that when you set the multi-user RPD in the Tool>Options>Multiuser the folder that you specify here automatically any repository in this folder can only be opened as read-only. I changed the foler path to where I copied the the RPD to and low and behold I was only able to open the file in read-only mode.
A

Multi User Conference Error (Multiple Subnets)

Hello,
I do not have a Mac OS X Server, but I was told that the OS X Server used Jabber and I am using a Jabber server (Windows based). I was hoping to find someone who has general knowledge of what I'm doing to possibly help out. I did originally post this question here: http://discussions.apple.com/thread.jspa?messageID=4921360#4921360
but I have not gotten a solution yet. It was suggested I post here because they are both Jabber servers.
Basically, I purchased 3 identical iMac computers. They are all running OS X version 10.4.9 with 2.16 GHz Intel Core 2 Duo and 2 GB of RAM. They are all running iChat AV 3.1.8. For authentication, we are using a Windows based Jabber server.
My company has three locations connected via a hardware VPN. Each site has their own subnet and all ports are open between the three sites.
When we first purchased the Mac computers, two went to Location X and were put on Subnet X. The other one was shipped to Location Y and put on Subnet Y. We tested three way video conferencing and it worked fine. We then packed up one of the computers and shipped it out to Location Z on Subnet Z. I can connect to Location X and Location Z on a 1 to 1 basis, but I can't begin a 3 way conversation. It tells me the user in Location Z can't enter a multi user conference.
Audio chat works, as well as text chat. Video chat does not. Based on the specs, I don't believe it is a hardware issue and I don't believe bandwidth is an issue. I spoke with tech support and they said I need only 100 kbps, which I have above and beyond.
As per my previous post in the iChat discussion, the bandwidth needed is actually 384k, which we have. It was also suggested that I run the cron scripts, which did not help. All ports are open, which is not something we need to consider.
I believe the root of the issue is the fact they are all on different subnets, but I can't seem to figure out how to fix that. It was suggested that I use Bonjour as a test, but I do not want a huge amount of traffic running around on the network as it detects the two Macs I need it to find. I have close to 400 users (most with two computers), over 100 servers, 50 users in each of the remote sites...and then to do that over a VPN.....
Any and all help is greatly appreciated and I thank you in advance.
P.S. - I am not super experienced at Mac, but I can usually find my way around. I have been mostly a PC guy most of my life.

Hi,
I appreciate that it was suggested that you post the question on this group, but I'm not sure that this is jabber technology problem.
I feel it is very important that you clarify some points for me.
Are you saying that the problem is only at location Z?
Can you confirm exactly what happens when the ichat Z tries to start the the way conference? Do the other clients get any messages (most important - does the status of client Z change in the window of clients X and Y?)
Need to know what happens when X and Y initiates the video chat.
Please clarity the above.
Jabber as a protocol set is very robust to issues of subnet and firewalls. The initiation of the group conference is processed via the jabber server, but once that phase in complete, the clients communicate directly with each other. If voice works, the video should also work, as the only difference is number of ports used (and bandwidth).
To help, I can give you access to a jabber server outside of your network to test things.

Trying to access Lion server remote using multi-user access, but from a legacy Leopard system

Just purchased a mini server running Lion, and got screen sharing working fine from my legacy system (32-bit so Leopard only). However, I would like to run in multi-user mode, so someone can use the Lion system and another person can access their own account, from the older Leopard system, at the same time. Using multi-user rather than screen sharing. But Leopard does not have the option on the Finder/Share Screen command, the pop-up window to select screen sharing or new virtual session. So, is there a way still to run a new virtual session from a remote client running Leopard? Since the multi-user capability resides on the Lion server, it should be possible, but how, without the pop-up menu?
Message was edited by: Kurt-Syracuse

Hey. I suggest you check out http://discussions.apple.com/message.jspa?messageID=9839785#9839785, where there are a couple solutions posted in regard to the error code -36 when connecting to a samba share. Good luck!
Jeremy A.
Tekserve Intern

Set multi user column with PowerShell used to work in 2010 but no longer works in 2013

In SharePoint 2010 I used PowerShell to set the value of multi user people columns and it worked really well. I attempt to use the same PowerShell to set the same column type in SharePoint 2013 and it fails.
here is the PowerShell that I use in 2010:
$web = Get-SPWeb "http://intranet"
$list = $web.lists["TestList"]
$item = $list.items.add()
$item["Title"] = "Test multi user column"
$users = @("Domain\user1", "Domain\user2")
$userList = new-object Microsoft.SharePoint.SPFieldUserValueCollection
foreach($user in $users)
$spUser = $web.EnsureUser($user)
$userValue = new-object Microsoft.SharePoint.SPFieldUserValue($web, $spUser.ID, $spUser.Name)
$userList.Add($userValue)
$item["MultiUserColumn"] = $userList
$item.update()
I have used this on three SharePoint 2013 farms with differing results. On two of them I receive an error when running $item.update(): Exception calling "Update" with "0" argument(s): "Invalid look-up value. A look-up
field contains invalid data. Please check the value and try again."
If I take one of the users out of the $users list then it works fine, but it will not allow multiple users to be set with PowerShell. I can use the GUI to add more than one user but not PowerShell.
Does anyone know if these methods have changed in 2013? I haven't been able to find anyone else with this issue.
mmm... coffee...

Not sure but maybe something to do with casting. Below is the code snippet from one of the blogs. Try modifying your script like below and see if still you get the error
[Microsoft.SharePoint.SPFieldUserValueCollection]$lotsofpeople = New-Object Microsoft.SharePoint.SPFieldUserValueCollection
$user1 = $w.EnsureUser("domain\user1");
$user1Value = New-Object Microsoft.SharePoint.SPFieldUserValue($w, $user1.Id, $user1.LoginName)
$user2 = $w.EnsureUser("domain\user2");
$user2Value = New-Object Microsoft.SharePoint.SPFieldUserValue($w, $user2.Id, $user2.LoginName);
$lotsofpeople.Add($user1Value);
$lotsofpeople.Add($user2Value);
$i["lotsofpeoplefield"] = $lotsofpeople;
$i.Update();
#-or-
$l.Fields["lotsofpeoplefield"].ParseAndSetValue($i,$lotsofpeople);
$i.Update();
Reference to the link
http://social.technet.microsoft.com/wiki/contents/articles/20831.sharepoint-a-complete-guide-to-getting-and-setting-fields-using-powershell.aspx
Geetanjali Arora | My blogs |

10.6.2 SMB - QB 2005 PC won't run in Multi User

Hi there,
This is a pretty specific issue but i'll throw this out anyway.
I setup a brand new 10.6.2 server alongside our old 10.4.11 server.
I cloned the contents of the "shared data" from the old box to the new one.
We have had the SMB service running for Quickbooks 2005 running on 2 PCs (Xp Pro clients), shared via QB's "Multi User" mode.
The new server's SMB share, identical in permissions etc to the old one, will not allow QB to open the file in Multi User mode. It gives an error to the effect of "Your company file has been damaged". My attempts to repair the QB file had no effect.
If I copy the same company file back onto our old Tiger Server's SMB share, it works fine. I assume this is simply a difference in Samba versions, but I have no idea how to troubleshoot it.
I obviously have a workaround for now, but it's less than ideal to have an entire Xserve on to share a Quickbooks file.
Any insight would be appreciated.
~p

Bumped into this article; I'll post back after i give it a shot.
http://edoceo.com/liber/network-samba-quickbooks
The gist of it:
"the directories that will be the root of the share must be owned by the group that the users who will access are in and they must be able to write"

Error d124 Multi user calendar

Similar Messages

Maybe you are looking for