Error: Data element for InfoObject AUFNR 0PM_ORDER could not be created(QA)
Hi Experts,
I am trying to Transport a request from DEV to QA,which consists Transaction Infosources, afetr the inport the TR is failed with return code 8. and the error message in the log is as follows.....
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Data element for InfoObject AUFNR 0PM_ORDER could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
Data element for InfoObject TXTMD could not be created
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
please Could anyone give the Inputs to solve this , I'll be greatful to you.
Thanks & regards
SK
hello AJ,
Till now the problem is not solved , Please provide some inputs.
here I'm getting this problem for TXTMD, 0CO_AREA, 0PM_ORDER, 0DATE, 0PLANT, 0ORDER_CURR, 0LOC_CURRCY
Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0CO_OM_NTW_1_SB activated under the name 0CO_OM_NTW_1_SA
It is not necessary to copy dependent objects for transfer structure 0CO_OM_NTW_1_SA
Data element for InfoObject KOKRS 0CO_AREA could not be created
Activating Transfer Rules 0CO_OM_NTW_1_SA ...
23 Transfer Rule(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
23 InfoObject(s) of the transfer structure 0CO_OM_NTW_1_SA removed from control table
Formulas have been saved
PLEASE PROVIDE SOME INPUTS.........
Message was edited by:
S K
Similar Messages
-
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 6 warning(s)
----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 21)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 22)
----------- Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 11)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 12)
----------- Payload: {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 3)
----------- Payload: {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 5)
----------- Payload: {8ACD4814-788B-11E1-AC70-A860A781E0D9} Adobe Dreamweaver CS6 12.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Dreamweaver CS6/Adobe Dreamweaver CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 418)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 418)
----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 2135)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 2135)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 524)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 524)
----------- Payload: {327492D4-78EB-11E1-8ABE-84C55623D190} Adobe InDesign CS6 Application Base Files 8.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 1051)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 1051)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_GB: Install failed
ERROR: DW050: - Adobe Illustrator CS6 Core_AdobeIllustrator16en_GBLanguagePack: Install failed
ERROR: DW050: - Adobe InDesign CS6 Application Base Files: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: Install failed
ERROR: DW050: - Adobe Dreamweaver CS6_AdobeDreamweaver12en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Dreamweaver CS6: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe InDesign CS6 Application Language Files_AdobeInDesign8AppLang-en_GB: Install failed
ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failedBespokeclo according to ERROR: DF015: Unable to delete symlink "/Applications/Adobe Dreamweaver CS6/Adobe Dreamweaver CS6.app/ it would appear you already have an existing installation of Dreamweaver CS6 installed. Please make sure to use the uninstaller located in the Applications/Utilities/Adobe Installers folder prior to reinstalling. If you continue to face difficulties then utilize the CC Cleaner Tool to ensure full removal. You can find details of the use of the CC Cleaner tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
-
Data element could not be created- error mesaage
hi all,
we are getting some wierd error when transporting to quality system. The transport for satrasfer structure datasource etc fails. The transfer structure does not get activated and we get following error message:
DD_DTEL_PUT: Act. parameter ROLLNAME=<space> invalid
DD_DTEL_PUT: Act. parameter ROLLNAME=<space> invalid
Data element for InfoObject BELNR 0DOC_NUM could not be created
Data element for InfoObject BELNR 0DOC_NUM could not be created
if you check the infoobjects data element it is active in that system. And this is not getting solved even if you recollect the trasfer structure and transport it. We have to ask for reimport. But we dont understand why is this happening. We have got this error 4-5 times and only in this system.
Please suggest how to resolve this. if any setting or basis related configuration is missing or what could be issue.
Any help will be rewarded by points.
Thanks and RegardsHi ,
The problem is probably with the number range for transferstructure data elements.
Number range objects are maintained with transaction SNUM. BI_TSDTEL is
used for naming of transferstructure dataelements. The status must
always be bigger than the highest transferstructure dataelement number.
Please refer to the notes 1009638 and 674818 for further information.
Best Regards,
Des. -
ORA-20100: AppDomain could not be created for the specified security level
We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ? -
HI Guys...
I am working on a RFC to HTTP scenario:
It is a standard SAP interface ....so we created only ID objects..obviously the BPM delivered by must be correct.
in sxmb_moni_bpe it is throwing th following error texts:
Runtime handle of object type could not be created
Error executing service for node
Exception CX_MERGE_SPLIT occured
component mapping has returned an error
unmodeled exception when executing service for node
No payload found
object FLOWITEM method EXECUTE cannot be executed
I tested the mapping payload from sxmb_moni in IR and it is working fine.
Receiver is an HTTP so could not able to find exactly whats happening as no thrid party tools can be installed....struck up here.
Any iputs will be of help in this area.
Thanx in adavance.
Kiranany inputs around this plz??
-
Object Project Definition could not be created
Hi Experts,
I am facing some trouble with multilevel controlling integration. Whenever I transfer a project I am getting the following error in cProjects:
Costing data may not be up-to-date Display Help
Error occurred in accounting - see controlling cockpit (cProjects) Display Help
In the Controlling Cockpit I find the following error:
Message Text
Object Project Definition TEST_01 could not be created
Technical Data
Message type__________ E (Error)
Message class_________ CNIF_PI (BAPI Notifications of Project System)
Message number________ 007
Message variable 1____ Project Definition
Message variable 2____ TEST_01
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________
Sort criterion________
Number________________
Could you please provide some ideas on this?
Thanks a lot!!
Neil
Edit: Any idea on this?
Edited by: Neil Billqvist on Nov 6, 2009 2:28 PMHi all,
I have reviewed the customizing and I cannot find anything missing.
Just to add some more information, if I go to the controlling cockpit, select the "Definition could not be created" error, and click in the autocheck option the PS project IS correctly created!!!
Do you have any ideas on this or on how can I track down the root error?
Thanks!
Neil -
"the directory E: could not be created." any help?
Upon initial start up (after effects CC) an error sign appears saying
"the directory E: could not be created."
any help?We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
Where did you install After Effects? It should be in the default application installation location for your operating system. -
PO could not be creating using the Enjoy-BAPI
Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan. -
Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).
-
How to add a new data element for existing table filed(Primary key field)
Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
RaviHi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob -
We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
However, after a couple of minutes- it comes back saying that the disk is unreadable.
I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive.
I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
Help!
Thanks,
Neilneillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here. -
Error -2003: a data handler needed by the movie could not be found
Hello.
I just purchased QuickTime Pro and the MPEG-2 add-on for it, for the single purpose of transcoding some MPEG-2 recordings to H.264. However, when I try to open any of my MPEG-2 files in Quicktime, I get the message: "error -2003: a data handler needed by the movie could not be found (my-filename.mpg)"
I can play these files in a number of different free players--VLC, Mplayer, Windows Media Player, RealPlayer... but not in the player I paid $50 for.
Can someone please help me?That doesn't really help. Besides, I haven't even got to the point where I'm trying to export. I get this error message when I try to open the file. I can't even play back the clip.
And the MPEG-2 page clearly states: "The QuickTime MPEG-2 Playback Component provides QuickTime users with the ability to import and play back MPEG-2 content, including both multiplexed (a.k.a. muxed, where the audio and video tracks are interleaved together into one track) and non-multiplexed (a.k.a. elementary) streams."
Also, Streamclip crashes when I try to load my MPEG-2 clips, so that's not going to work (and even if it did, I am trying to find a simple way to take the HDTV content I've recorded off the air and get it onto my AppleTV--I want fewer steps, not more).
Looks like I'll have to waste some time calling customer service to get a refund, since there's no way to do this via the website. -
Error " Data missing for the entry check while creating a new waste code
Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
AlvaroHello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro. -
Error in File UNKNOWN.RPT: The request could not be submitted for backgroun
I receive: Error in File UNKNOWN.RPT: The request could not be submitted for background processing.
The error is on a windows Server 2008 SP2 production server. The report generates fine if I run it from within Visual studio 2008 on the server but not through IIS. The Crystal Reports is the version that came with vs2008 (10.5).
Initially I was getting unauthorized access errors so I granted full access to everyone for the bin and managed crystal report folders under program files. This fixed the unauthorized access problem but now I get the background processing error. I also tried to inpersonate an admin account with the same result. I tried to copy the crystal reports dll's to the bin folder for the project but that did not help either. I am running out of ideas. I did notice that a 16kb rpt file is generated in the Windows/temp folder every time I try to run the report.
the crashing page is here Link:[http://futuretechgroup.com/cgi-bin/crystaltest.aspx]
Here is the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 5/24/2010 12:24:56 PM
Event time (UTC): 5/24/2010 7:24:56 PM
Event ID: 87ee3d9297fb409ea7b440b059a0f07d
Event sequence: 4
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/5172/ROOT-1-129192026961318172
Trust level: Full
Application Virtual Path: /
Application Path: C:\inetpub\vhosts\futuretechgroup.com\httpdocs\
Machine name: FTG2009
Process information:
Process ID: 3644
Process name: w3wp.exe
Account name: FTG2009\IWPD_1(yanoshftg)
Exception information:
Exception type: CrystalReportsException
Exception message: Load report failed.
Request information:
Request URL: http://futuretechgroup.com/cgi-bin/crystaltest.aspx
Request path: /cgi-bin/crystaltest.aspx
User host address: 70.173.237.72
User:
Is authenticated: False
Authentication Type:
Thread account name: FTG2009\IWPD_1(yanoshftg)
Thread information:
Thread ID: 5
Thread account name: FTG2009\IWPD_1(yanoshftg)
Is impersonating: False
Stack trace: at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at cgi_bin_CrystalTest.CreateReport() in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 15
at cgi_bin_CrystalTest.Page_Load(Object sender, EventArgs e) in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 9
at System.Web.UI.Control.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)1. The OS is 32bit
2. Yes. The C drive is the primary drive
3. For the sake of simplicity and to troubleshoot the sample code has no datasource just 'Hello' in the report header. The Actual work order report that I need has ADO as datasource and it builds a PDF report without any problems when I run the page from VS2008 (development server) so I think the dll's are where thay are supposed to be. The c:\windows\assembly folder has about 25 CrystalDecisions files (10.5.37).
Do I still need to create a deployment package even though I have everything else working?
Below is the code I am using to create the report
Sub CreateReport()
Dim myReport As New ReportDocument
'Try
myReport.Load(Server.MapPath("CrystalReport.rpt"))
'Catch ex As Exception
'MsgBox(ex.InnerException.ToString)
'End Try
Dim g As Guid = Guid.NewGuid
Dim woPath As String = "../FileTemp/" & g.ToString & ".pdf"
'Try
Dim CrExportOptions As ExportOptions
Dim CrDiskFileDestinationOptions As New _
DiskFileDestinationOptions()
Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
CrDiskFileDestinationOptions.DiskFileName = _
Server.MapPath(woPath)
CrExportOptions = myReport.ExportOptions
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.PortableDocFormat
.DestinationOptions = CrDiskFileDestinationOptions
.FormatOptions = CrFormatTypeOptions
End With
myReport.Export()
'Catch ex As Exception
'MsgBox(ex.ToString)
'End Try
Response.Redirect(woPath)
End Sub -
I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structureAssociation rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net
Maybe you are looking for
-
Hi everyone, I'm trying to use the batch create multiple files command in Acrobat 10.1.3 to create a pdf from multiple word files but when I try to add the files, all Word files are greyed out. Is it possible to batch create from Word files or is tha
-
My ipad has not been able to detect wifi
i have reset it and rextored it, and it hasent worked for 4 days, i called apple and they said it was the router and it needs an up date, but we just got it is month.
-
GoPro Camera (file type question)
Hi all, I'm having difficulty editing the clips after importing them from the GoPro camera. The GoPro camera records in 1080p, and the clips are .mp4 files -- encoded in h.264. When attempting to play back the footage in a Timeline Sequence, there is
-
Newly bought HP 7520 e-all-in-one does not scan in color on mu Mac OS 10.9
Help need, totally frustrated. Just installed a brand new HP 7520 e-all-in-one on my new MAC OS 10.9. The product prints and copies in color. However all scans come out black&white??? Who can help me, desperate in time constraints. I have the print
-
I have just bought a iphone 4s and i own a Nano, my concerns are i have tried to sync my nano before and have lost all my music that i previously put on when i tried to add new songs to it is their a easier way to do this to my new phone without losi