Error "Data of InfoProvider &1 was locked by administrator"

Hello,
I am getting the error "Data of InfoProvider Z_XXXX was locked by administrator" when I try to run the planning functions in planning modeler thru a planning sequence.
I checked in RSPLSE and SM12 and there are no locks on this particular cube and also this cube is in plan mode.
Can anyone suggest what can be the reason of such error?
Regards,
Deepti

Hi Deepti,
this message comes from master locks set by planning functions contained in process chains. The long text of the message contains more information about the problem, e.g. the process chain and the variant used.
Also the last tab in RSPLSE displays all active master locks (cf. info botton there).
So it seems that a process chain runs or master locks were not deleted for some reason. You can delete master locks also via RSPLSE (last tab). Doing so creates no data inconsistency since ususal locks are used by planning functions. The master locks protect planning functions in process chains: these functions should no fail because of lock conflicts with other users.
Regards,
Gregor

Similar Messages

10.1.3 errors - since my last question was locked by a mod - despite not being answered

Quote:
frustratedbutopenAug 27, 2014 6:17 AM
Wow. Apple really screwed up the program this time. Here's some of my new problems.
1. PDF's no longer cycle through the pages in the viewer window. You can't skim the pages, find the one you need, and drop it in. I do a lot of training videos using PDFs to show pages of manuals and whatnot. This makes my edits a real PITA
Video of error: http://youtu.be/tpAQC2wUmEg
2. 24p footage strobes in the viewer, in the scopes, and while editing the footage. Timeline set to 24p.
Video of error: http://youtu.be/IfdxthOF0Z8
3. Can't import C300 footage anymore. This is a screenshot of my import window when looking at a C300 card. I have the latest Canon drivers and utilities installed on my system
The combination of these three issues has made it almost impossible to use this program anymore. It can no longer do what I need it to do.
Does anyone have any ideas - besides moving over to PremierPro, which I have just purchased as of this morning?
Then Tom Wolsky replied:
Tom Wolsky Aug 27, 2014 7:03 AM Re: New problems with 10.1.3 - 24p footage strobing, among others...
Re: New problems with 10.1.3 - 24p footage strobing, among others... in response to frustratedbutopen
What did you upgrade from? What are your system specs?
I'm not seeing the strobe in the 23.98 media. Maybe YouTube is suppressing it.
Only seen C300 media once but that doesn't look like a complete folder structure.
I'm sure you'll be happy with Premiere.

Tom - in answer to your questions,
The strobing is there when I watch the video on youtube. I can post a higher rez clip, but its apparent on the scope.
1. I upgraded from 10.2.1. MacPro 3.5 6-core Xeon E5, 32 GB 1867 DDR3 (Mavericks, obviously)
2. That's the card - taken directly from the C300 and stuck into the card-reader. Footage opens just fine in PPro
3. "Sure you'll be happy with Premiere" C'mon man. What kind of boneheaded reply is that? That's a typical apple egghead "pi$s off". It would be great if assistance could be offered without the snobbery, but thanks for living up to the stereotype. I have invested in X from the get-go. I've had X installed since it came out and I made the commitment to learn it and use it as the edit-backbone of my projects. I dumped 5 figures into 3 MPro trashcans - all running x - because I believed enough in this product to do so. You're doing Apple a disservice by being so dismissive and smug.
I mentioned that I bought PPro because as of this latest update, X is creating enough trouble in my workflow to where it is costing me time and time is money. Look at the issues with 10.1.3 that are being posted just in this forum. If you can't see that there may actually be some issues with the software, then maybe you need to loosen your beret a bit.

Error message: this feature has been locked by administrator.

HP Officejet Pro 8600 Plus, I cannot find a way to unlock the features that I need to reconfigure my wireless information after changing my router.

Hello everyone,
I would like to try and assist with these issues, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Error reading the data of InfoProvider /APC/FINGLV01

Hi All,
Via RSA1 I wanted to check the data but met the following error
/APC/FIAGLACC_TD01_FQ9CLNT001: The application running deliberately caused an abo
Error in substep Error reading the data of InfoProvider /APC/FINGLV01
Also, in all oview view, it displayed "No data available" error.
Error msg : Error reading the data of InfoProvider /APC/FINGLV01
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Thanks in advance
regards,
Anil
Edited by: Anil Kumar Koppuravuri on Oct 16, 2009 3:53 AM

At this point of time, we are unable to implement any patches, we would like to know exact reason behind the error, so that we can correct it with out implementing a patch.
And also the problem is not Consistent, Some time it works fine (50% Time it works fine)
I really appreciate your time
Message was edited by: TR Palle

Error reading data of infoprovider

My query contains no data when i execute the bex analyzer. The popup message error was
" Error reading data of infoprovider "
" Error while reading data;navigation is possible"
please advise

Hi,
Check following:
1. If there is any data in the cube.
2. If the cube is having any authorization InfoObjects which are not assigned to you.
3. The query returns the data for the filters and restrictions that you might have specified in Query Designer.
4. Test your query in RSRT to check if actually returns any data.
Regards,
Deepti

Error while copying data from infoprovider to planning area

Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?

Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore

I downloaded new version of itunes. Then itunes asked if i wanted the latest version for ipod. itunes said it was getting ipod ready for download, then there was an error message. Now ipod is locked up with a apple on the screen and a line under it

I downloaded the latest version of itunes. Then itunes asked if i wanted the latest version on ipod. Itunes was getting ipod ready then a error happened. Now ipod is locked up with a apple on screen with a download line under it. Also itunes will not recognize ipod like it has before. If anyone can help it would be appreciated. Thanks

Do a hard reset, put it in DFU Mode and do a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Interactive Reporting:Error reading data of InfoProvider /CRMBW/CSAL_C01

Hi Forum,
I configured an interactive reporting to read interaction record data.
When I execute the reporting, I am getting the following error message:
+Error reading the data of InfoProvider /CRMBW/CSAL_C01+
+No destination exists to source system YYYCLNT999+
The RFC mentioned in the error message is not the correct one. But I checked the configuration in RSA1 and the RFC mentioned there is the correct one. So, I think I am missing a customizing that is pointing to the wrong client...
Any idea ?
Thanks a lot and best regards.

Hi,
first you should check the overall configuration. Go to your CRM client and run transaction /CRMBW/CONFIG_WIZARD. If there are errors or warnings, solve them step by step. The transaction should be self-explaining but may require some expertise (the documentation provided should help, though).
Best regards

Error when reading the data of infoprovider

Hello,
I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
Error reading the data of InfoProvider ZDPPTGR1
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
Thanks for answering!
Kind regards
Heinz

Hi,
Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
Remote cube - uncaught exception
DBMAN350 Error reading MultiCube data over aggregate
Error reading the data of InfoProvider 0TCT_VC01
Regards,
Arpit

BEX query error---Error reading the data of InfoProvider

Hello all,
we are getting the following msg when we execute the query-
Error reading the data of InfoProvider ZEUDPR01
Errors occurred when extracting data from DataSource 9AEU_DOM
Short Text: Error for COM routine using application program (return c
Parameter: 1028533- LC kernel
Message in Source System: E102(/SAPAPO/OM) ...
Short Text: COM - error Unknown
Parameter: Unknown
Message in Source System: E001(/SAPAPO/OM) ...
Messages for DataSource 9AEU_DOM from source system PA1CLNT100
Errors occurred during parallel processing of query 4, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
Found
This is the error observed for a particular selection only..for rest of the selection we get the data correctly.
Please help with the possible causes of error.
Thanks,
Pallavi

Hi Pallavi,
How did you manage the pb?
we have the same error after Stack 21 (SP23)
we could not run query.
Thanks.
John

Error running query - 'Error reading the data of InfoProvider 0TCT_VC01'

Hi,
I have worked through all the steps to activate BI statistics in our system (Netweaver 2004s SAP_BW 700 BI_CONT 702) yet some of the queries are not working.
Specifically when I run the query 0TCT_MC01/0TCT_MC01_Q0131 I get an error that reads:
Error reading the data of InfoProvider 0TCT_VC01
There is still no data source assigned to VirtualProvider 0TCT_VC01
Any help on how to resolve this would be appreciated.
Thanks.
Dyllan

Did you install the underlying basic cube for the virtual cube(FM) to read the data from? That shoudl be 0TCT_C01- I guess

Data in Infoprovider is locked by User - Integrated Planning

Hello Gurus,
My Users have different Authorizations based on Company Code. One User (BWCHECK) has the authorization for Company code 5400. The other User (BWCHECK1) has the authorization for Company code 6100. 0COMP_CODE is set as Authorization object
Although we are working on IP we are working with the "old" authorization concept.
If BWCHECK is working and BWCHECK1 tries also to work the message is "Data in Infoprovider is locked by User BWCHECK. Both have different company codes.
Do you have a solution for this? Would be very helpful.
Thank you in advance.
Kind Regards
Doris

Hallo Doris,
first check that you restrict 0COMP_CODE in your query as ment by Rodrigo.
You can use the variable of the type "authorized values" in order to restrict the user to all values that are allowed through authorization.
If this does not solve the problem, you can use rsplan / "Manage Lock Server" in order to check the lock settings.
Regards,
Kirill

Can i erase my stolen macbook pro with find my mac even if it states the device was locked on a specific date (not by me) after being stolen?

Can i erase my stolen macbook pro with find my mac even if it states the device was locked on a specific date (not by me) after being stolen?

Barry, the other stolen computer, my IMac does not show me a locked on such and such date, but simply says offline. I set that computer to erase when it goes online and notify me when it is found, and to play a tone and play a message that the police are on their way!

I was just copying my data from stand by phone by using phone to phone data transfer but phone also locked with i cloud login of stand by phone what to do

i was just copying my data from stand by phone by using phone to phone data transfer but phone also locked with i cloud login of stand by phone what to do

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

My icloud account was locked yesterday due to server error.26/11/2012 18:57-19:25 CET. I cannot use it because I cannot answer the security question wright. What can I do? Help please

My icloud account was locked yesterday due to server (iCloud) Faillure 26/11/12. PM
I cannot use the account because I canot answer my security question right. Also my second e-mail adress was no activated, so I cannot activate the icloud account via e-mal
What Can I do?
Thank You

It would worth your asking in the Final Cut Pro X forum - someone else may have experienced the same problem.
I assume you have already trashed Preferences/ByHost/com.apple.dotmac... (several files beginning with this) and (same path) com.apple.idisk - though I suspect the problem lies rather with the individual programs which are trying to access something on the non-existent iDisk.

Error "Data of InfoProvider &1 was locked by administrator"

Similar Messages

Maybe you are looking for