Error "Data packet not complete; for example, 000013" when reading from PSA
Dear all,
I have an issue with my data loading, when i execute my infopackage, i specify that it should be loaded into PSA before going to the data target. in my infopackage request i notice that i have got missing data package
e.g.
Data package 1 : everything OK
Data package 2 : everything OK
Data package 3 : everything OK
Data package 8 : everything OK
Data package 10 : everything OK
Data package 12 : everything OK
Data package 13 : everything OK
what happen to data package inbetween e.g. DP4, DP5 etc etc?
In my "step by step analysis" under the status tab everything is green and nothing seem to have went wrong, no short dump, no job cancelled, nothing.
Since everything "seems" to be alright, when i try to update subsequently to the data target, i get the following errors below.
Data packet not complete; for example, 000013
Request has errors / is incomplete
I got 2 questions here...
1. why do i have missing data package and it still showes me a green idicator?
2. how can i solve this and is this something i should be worried about?
Thank you very very much!
Hii SCHT,
you encounter these type of errors rarely...
but in RSMO screen, check for any TRFCs struck..
also go to the JOB in Source System and analyze the JOBLOG,
there you can find some information about what tht particular job did..!!!
and after that check for the same in the BW system...
perhaps while transferring?extracting the recordsthrough data packages, it might have missed ..
Force the request RED and repeat the IP again...
you dont need to worry about anything...simply force the request red and reload.. just let us know if the problem still persists after repeating the load...
Regards
Prince
Similar Messages
-
ERROR OGG-01148 programming error, data type not supported for column
I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support -
I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.
The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes. -
OTO information not complete for non ABAP instance of system &1 in SMSY
Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban HartzsteinHello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein -
I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help -
Error Message - "could not complete your request because the preset contains invalid data"
I am trying to open a file, and every time I do it comes up with the following error message:
"Could not complete your request because the preset contains invalid data"
I am using Photoshop CS4 on a Macbook Pro running Snow Leopard 10.6.2.
I have tried:
- restarting my mac
- opening different files created at different times
- deleting photoshop from my app folder and the app support folder from my /username/library/application support/adobe/ folder and copied them back from a Time Machine backup from a few days ago.
I was using Photoshop all day today with absolutely no problems. I have searched Google and this forum and have come up short. No one has this exact error anywhere.
Any help? Thanks so much in advance!
Pat DryburghThe one thing you didn't do is reset your Photoshop preferences.
Most likely the preferences got corrupted, and reference a corrupt preset. -
hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.
- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Already purchase and sign. Lost internet data...aaaahh... .error - "We could not complete your purchase.The product distribution file could not be verified. It may be damaged or was not signed".
Update: i spoke to a very knowledgeable applecare representitive who walked me thrue the process, we were trying to figure out what exactly was preventing Mountain Lion from installing & (after a process of elimination) it turns out you need to be log in as an Admin to download it, we also made sure everything was up-to-date. Downloading Mountain Lion took about 40 minutes (with roadrunner high speed internet, DSL might be a bit slower) once it was downloaded the installation process was very intuititive with just a few clicks and about 35 minutes i had the latest Operating System.
-
have itunes vouchers and each time i click redeem , I get error "we could not complete your itunes store request, an unknown error occured 1202, try again later. I have tried this for 4 days running and get same error.
I have this same problem. It's like it is not Authorizing this Mac.
What happens when you try to listen to a preview on the Music Store?
Mine asks me to authorize again and gives me the error exactly as you said above.
What happens when you try to view your account information (in Music Store, click on your account name in the top right corner)?
Mine lets me authorize sucessfully and shows me my account information.
I have emailed iTunes support about this and they replied with a generic answer about Deauthorizing and re-authorizing the computer.
I even tried, to no avail, the tips here...
http://discussions.apple.com/thread.jspa?threadID=471237&tstart=30
If anybody reads all this and has any new info for us, please take the time to post it here!
PowerMac G4 Mac OS X (10.4.6) -
Photoshop CS6 Error Message: Could not complete your request because of a program error.
Photoshop CS6 version 13.0 v64
On Mac OS 10.8.5
Error Message: Could not complete your request because of a program error.
Help! My CS6 photoshop was working before I upgraded my operating system to OS 10.8.5. I uninstalled photoshop and reinstalled it. Still doesn't work. I can't do anything in Photoshop, it comes up with that error everytime I try to open a file.Hi,
Thanks for the information. I tried it and the message "Could not complete your request because of a program error." comes up when I open the program or try to do anything in the program. So when I went to edit preferences it pops the same message up. It won't let me do anything in photoshop. I am up to date on the operating system but that didn't fix it either. Any other ideas would be appreciated. I cant use photoshop on my main computer at all!
Thank you! -
Data packet not yet processing in ODS load??
Hi all,
I got an error when I loaded data from IS to the ODS. Can someone let me know why and how to resolve it. Thank you in advance.
Here is the error message in the monitor:
<b>Warning: data packet 1 & 2 arrived BW; processing: data packet not yet processing.
(No data packet numbers could be determined for request REQU_77H7ERP54VXW5PZZP5J6DYKP7)</b>
<b>Processing end:
transfer rules (0 record): missing message
Update PSA (0 record): messing messages
Update rules (0 record): messging messages</b>John,
I dont think its space problem.In st22 go with detail note.
What happend, how to correct it.Will help you to solve the problem.
Check this note <b>613440</b> also.
<b>Note : 647125</b>
Symptom
A DYNPRO_FIELD_CONVERSION dump occurs on screen 450 of the RSM1 function group (saplrsm1).
Other terms
DYNPRO_FIELD_CONVERSION, 450, SAPLRSM1
Reason and Prerequisites
This is caused by a program error.
The screen contains unused, hidden fields/screen elements that are too small for the screen check that was intensified with the current Basis patch (kernel patch 880). These fields originate in the 4.0B period of BW 1.0 and are never used.
Solution
Depending on your BW system release, you must solve the problem as follows:
BW 3.0B
ImportSupport Package 14 for 3.0B (BW 3.0B Patch 14 or SAPKW30B14) into your BW system. This Support Package will be available when note 571695 with the short text,"SAPBWNews BW 3.0B Support Package 14", which describes this Support Package in more detail, is released for customers.
BW 3.1 Content
ImportSupport Package 8 for 3.1 Content (BW 3.10 Patch 08 or SAPKW31008) into your BW system.This Support Package will be availablewhen note 571743 with the short text, "SAPBWNews BW 3.1 Content Support Package 08", is released for customers.
The dump occurs with the invisible G_NEW_DATUM date field on the bottom right of the screen, which is only 1 byte long and can be deleted.
You can delete the following unused fields/screen elements:
%A_G_NEW_NOW Selectionfield group
G_NEW_ZEIT Input/output field
G_NEW_UNAME Input/output field
G_NEW_DATUM Input/output field
%#AUTOTEXT021 Text field
G_NEW_NOW Selection button
G_NEW_BATCH Selection button
You can delete these fields/screen elements because they are not used anywhere.
This deletion does not cause any problems.
After you delete the fields/screen elements, you must also delete the following rows in the flow logic in screen 450:
FIELD G_NEW_DATUM MODULE DOKU_NEW_DATUM.
FIELD G_NEW_ZEIT MODULE DOKU_NEW_ZEIT.
The function group is then syntactically correct.
Unfortunately, we cannot provide an advance correction.
The aforementioned notes may already be available to provide information in advance of the Support Package release.However, the short text will still contains the words "preliminary version" in this case.
For more information on BW Support Packages, see note 110934.
Thanks
Ram -
Hi ,all
I am beginner for windows 8 app development.
I created simple project on domain name called www.aaa.com and also hosted web services on same domain. at that time i was able to access web services on my application code using AJAX. Then i created same project on another domain called www.bbb.com then
i tried to access wcf services from www.aaa.com domain. at that time my javaScript console is throwing this error "SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd.
File: default.html". I tried some thing on both end on web services project as well as windows 8 app.
AT app side in package.appxmanifest file i added below code.
<Capabilities>
<Capability Name="privateNetworkClientServer" />
<Capability Name="internetClient" />
</Capabilities>
AT web services side in web.config file i added following settings.
<serviceHostingEnvironment aspNetCompatibilityEnabled="true"
multipleSiteBindingsEnabled="true" />
<standardEndpoints>
<webScriptEndpoint>
<standardEndpoint name="" crossDomainScriptAccessEnabled="true" />
</webScriptEndpoint>
</standardEndpoints>
but above all diagnostics are not working for me.
and one more thing at www.bbb.com domain in sample android app while i am trying to consume my wcf services it is working fine. the problem is specifically for windows 8 app only.
Here is sample code which i had written in default.html file
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8" />
<title>DemoWebService</title>
<!-- DemoWebService references -->
<script src="/js/default.js"></script>
<script>
var personNameVar = "Hardik";
var dataIn = '{' + '"personName":"' + personNameVar + '"}';
$.ajax({
url: "http://SomeIP:SomePort/Service1.svc/HelloWorld",
type: "POST",
contentType: "application/json; charset=utf-8",
data: dataIn,
dataType: "json",
success: function (data) {
var object = JSON.parse(data.d);
if (object.Error == '') {
$('body').html(object.Response);
error: function (error) {
$('body').html(error);
</script>
</head>
<body>
</body>
</html>
so is there any help. I am eagerly waiting for it.
P.S I am accessing www.aaa.com web services using VPN.
Thanks in advance,
HardikIn that case, I recommend that you collect a Network trace using a tool such as Microsoft Network Monitor or Wireshark to understand what IP Address is the connection being made to. The 0x2efd error correlates to the WinINet error: ERROR_INTERNET_CANNOT_CONNECT
meaning that the connection with the remote server cannot be established. When you collect a network trace, try looking for the TCP-SYN signal and see whether your remote server responds with a SYN-ACK.
Windows Store Developer Solutions, follow us on Twitter:
@WSDevSol|| Want more solutions? See our blog -
ERROR: "You did not complete the entire form. Please enter your country."
When I tried to download a song tonight, I got a message that said that my billing info had changed and that I needed to verify it before I could purchase any music. On the "Edit Payment Information" page, I put in all of my info (my address was missing), and hit done. I get the error: "You did not complete the entire form. Please enter your country." Well, the country field is not editable, and but it says "United States," which is the right country. I can't get passed it, so I can't download anything. I'm running the latest version of iTunes... but I haven't purchased anything since.
The other thing that concerns me is that I didn't change any billing info, so this is a bit strange. Does anyone have any ideas of what's going on? Thanks!!Just in case this ever happens to anyone else, here is how to fix the problem (THANKS, ITUNES SUPPORT)!!
1) Sign out of the iTunes Store by choosing Sign Out from the Store menu in iTunes.
2) Visit Apple's My Info website:
http://myinfo.apple.com
3) Choose your country and preferred language. Then enter your iTunes Store account name and password and click Continue.
4) Choose Address Book from the menu on the left. On the Edit Address Book page, look at your shipping addresses at the bottom. If you have multiple shipping addresses, remove any out-of-date or duplicate addresses by clicking Delete. Also, make sure the state or province field is filled out correctly for each address. To edit an address, click Edit.
5) Now choose Phone Numbers from the menu on the left to look at your phone numbers. The area codes should be in the area code fields and the phone numbers should be in the phone number fields. If an area code is missing, or if it is in a phone number field, your account information may not save properly.
6) Make any other necessary corrections, then click the Save Changes button.
7) Click Log out in the upper-right corner.
When you make your next iTunes Store purchase, you will be asked to review your billing information. At that point, you can change your information or simply click Done. After that, you should be able to purchase items. -
Job Cancelled with an error "Data does not match the job def: Job terminat"
Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AMDear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid? -
Error while running adcfgclone on APPS tier (ERROR: context creation not completed successfully)
I am getting below error while running adcfgclone on APPS tier
ERROR : Unable to set CLASSPATH
/corp_ex1/DRPM/drpmcomn/clone/bin/../jlib/classes111.zip: is missing
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_29475.err file for errors
i copied classes111.zip from IAS_HOME to COMMON_TOP . Now I am getting below error
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_30763.err file for errorsPlease post the details of the application release, database version and OS.
ERROR: context creation not completed successfully
This is a generic error, please check the log files for details about the error.
Thanks,
Hussein
Maybe you are looking for
-
I have an Iphone 4 and the IOS app was downloaded. I HATE it it will not allow me to group text. i do a prayer chain for my church and it will not let me type any messages...is there anyway to delete this app or upgrade
-
Hi , How to access Enterprise Link in BAM 11g ( Linux) ?I need to import plans from 10.1.3.4 Can anyone guide me how to access Design Studio in BAM 11G.
-
No violations at user/role level
Hi All, We are using GRC 10.1 SP04 While running the risk analysis reports on user/role level, I don't see any violations. Post running the reports, I can only see that "No rules were selected" under Action field. Recently we added a few more systems
-
RSKC is in BW special characters has had no effect
HI All, We have problems while loading : Value 'SD009# ' (Hex ' ') ZSDEVT contains unauthorized characters We added # and executed (F8 button )to RSKC in BWP. But no use still we get the same error. 1. Why RSKC is not functiong well, Our version is
-
Hi all, Am trying to implement a BAPI that rerutrns a PDF to a webdynpro. I create the PDF from a smartform through FM 'CONVERT_OTF_2_PDF'. Now this FM returns a table of type TLINETAB, and when a try to put a parameter of the same type in my BAPI i