Error data Storage
what is error data storage at XI? Also provide me the details along with screeshot.
Hi Shweta,
All error log's stored at following location.
i,e /usr/sap/X01(system id)/DVBMGS000/j2ee/cluster/dispatcher/log.
wher u can find system and default trace.
u can saw all error log's at that location.
warm regards
mahesh.
Similar Messages
-
ADI0052E: TSM API Error: ANS1311E (RC11) Server out of data storage space
Hello guys,
I have a problem with the backup on MaxDB. It always fails with the following error message
ADI0052E: TSM API Error: ANS1311E (RC11) Server out of data storage space
Has anyone faced this problem before? Any solution how could this be solved?
Thanks for your help.
Regards,
DanHi Dan,
Check the TSM server and make sure the primary storage pool that is defined
as your copy destination for the management class you are using is not full
and or you have not run out of scratch tapes. In either case a storage pool
has filled up and cannot migrate data causing the RC11. This is usually what
an RC11 Server out of data storage space means.
I am sharing configuration for Oracle database. You can check similar configuration for MaxDB database.
when i defined the node in my tsm server :
REG NODE hostname_oracle password maxnummp=2, it was defined in standard storage pool, i moved it in other storage.
Hope this is useful.
Regards,
Deepak Kori -
Im in the middle of a rather large migration and a few users are see the below error when trying to log in to OWA:
X-OWA-Error: SDServerErr;Microsoft.Exchange.Data.Storage.StoragePermanentExceptionI cant find much on this error other than the enable inheritance permissions fix which all these accounts already have.Has anyone else come across this before?Hi
This problem occurs because the discretionary access control list (DACL) inheritance is disabled on the user account in Active Directory. The Exchange Servers group must have permissions
to write the msExchUserCulture attribute on the user when the language has been specified in OWA.
To resolve this problem, follow these steps:
1. Open Active Directory Users and Computers.
2. Click View, and then click Advanced Features.
Note To make the Security tab available at both the user level and the organizational unit level, you must enable the Advanced Features option in Active Directory Users and Computers. This option is available under the View menu.
3. Open the properties for both the user level and the organizational unit level that the users are located in, and then locate the Security tab.
4. Click Advanced.
5. Make sure that the following check box is selected:
Allow inheritable permissions from the parent to propagate to this object and all child objects. Include these with entries explicitly defined here.
6. Force Active Directory replication.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you -
When I run the Read Meas.vi, it has error if I do not turn off the data storage. The same thing happen when I run the App. Example. vi. Anyone knows how to solve this problem? Thanks alot.
KLLoganS wrote:
Hi KL,
The Read Meas.vi is one of the subvi's in the App. Example.vi, so this problem is most likely the same problem in each case. From the help for Read Meas.vi:
Data Storage instructs the device to store the data to be sent to either the internal or external buffer. If TRUE (default), the VI stores data in the on mode. If FALSE, the VI does not retain data in the off mode. Use the off mode only with the average min/max operation when you do not need to retrieve data. You cannot configure the meter for external buffering in the off mode.
So the question is, are you trying to retrieve any data? If so, then as indicated in the above paragraph, you cannot retrieve data and have the data storage turned off. Good luck!
Logan S.
Yes, I need to retrieve data. So due to that problem, I cannot really get any data. I am not sure is that problem is due to the USB GPIB or not. But once I click on the click arrow, everying goes fine from initialise, measurment... once it comes to Read measurment, it has error (say somthing like: VISA Wait on Event for RQS.vi->HP34401A Read Meas.vi->Untitled 1) I have no idea like what it shows up.
KL -
V4.2 error: Short term data storage is full
Hope someone here can help. We are still using 4.2 for now.
Upon logging into Admin, we are receiving an error stating "PLANNING short term data storage is full, do you want to optimize the application?". When checking the appset status the application only has about 400 records in short term storage. We have tried saving the application immediately followed by optimization, yet this error continues.
Any thoughts on how to rectify this?
Thank you.So you have scheduled a lite optimize or full optimize where you are specifying the number of records from where the optimize is necessary.
This number is probably very small between 0 and 400 and every time when you are connecting with admin module you are receiving this message.
So you have to change that number to be 40000 not more and you will not receive any more that message when you have 400 records you will receive the message when you will have over 40000.
You can find the parameter also into tbldefault table from your appset.
I don't remember the name of parameter but you will manage to find out this parameter.
Regards
Sorin Radulescu -
TREX - Configuring Distributed Slave with Decentralized Data Storage
I am creating a distributed TREX environment with decentralized data storage with 3 hosts. The environment is running TREX 7.10 Rev 14 on Windows 2003 x64. These are the hosts:
Server 01p: 1st Master NameServer, Master Index Server, Master Queue Server
Server 02p: 2nd Master NameServer, Slave Index Server
Server 03p: Slave NameServer, Slave Index Server (GOAL; Not there yet)
The first and second hosts are properly set up, with the first host creating the index and replicating the snapshot to the slave index server for searching. The third host is added to the landscape. When I attempt to change the role of the third host to be a slave for the Master IS and run a check on the landscape, I receive the following errors:
check...
wsaphptd03p: file error on 'wsaphptd03p:e:\usr\sap\HPT\TRX00\_test_file_wsaphptd02p_: The system cannot find the file specified'
wsaphptd02p: file error on 'wsaphptd02p:e:\usr\sap\HPT\TRX00\_test_file_wsaphptd03p_: The system cannot find the file specified'
slaves: select 'Use Central Storage' for shared slaves on central storage or change base path to non shared location
The installs were all performed in the same with, with storage on the "E:" drive using a local install on the stand-alone installation as described in the TREX71InstallMultipleHosts and TREX71INstallSingleHosts guides provided.
Does anybody know what I should try to do to resolve this issue to add the third host to my TREX distributed landscape? There really weren't any documents that gave more information besides the install documents.
Thanks for any help.A ticket was opened with SAP customer support. The response to that ticket is below:
Many thanks for the connection. We found out, that the error message is wrong. It can be ignored, if you press 'Shift' and button 'Deploy' (TREXAdmin tool -> Landscape Configuration). We will fix this error in the next Revision (Revision 25) for TREX 7.1. -
File path of open data storage
Hello all!
Now I'm using the blocks of open data storage, write data and close data storage for storing and extracting result data. For the file path issue, before I
set the data path by double clicking the "open data storage" block and inserting the file location in the indicated place, and that worked!
Now since I made a stand alone application of this program and shall use it in other computers, the file location I inserted in open data storage block isn't
valid any more in other PCs. So I modified my source code by connecting a "current vi path" to the open data storage block's file path node instead of
inserting it inside the block, and this doesn't work! During running there shows an error in the write data block saying that the storage refnum isn't valid!
I'm wondering why I couldn't specify the file path like this. Any way to allow me to specify the file path as the current vi path?
Thanks!
Chao
Solved!
Go to Solution.You need to account for the path changes when built in to an application, have a look at this example.
https://decibel.ni.com/content/docs/DOC-4212
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community. -
Hi I am facing an issue with Outlook web access on my production server Exchange Server 2007 with Sp1. When i try to reply or forward a message from OWA it displays The message has been deleted due to a virus threat . Kindly refer to the below error details. I have a box with all 3 roles installed I do not have an Edge Server . IO have installed Forefront on the same Box as my exchange Server.Below is the Detail of the error . Kindly Help
A virus was found in this message and it has been deleted. For further
information, please contact technical support for your organization.
Click here to continue working.
Copy error details to clipboard
Show details
Request
Url: https://192.168.7.12:443/owa/forms/basic/BasicEditMessage.aspx?ae=Item&t=IPM.Note&a=Reply&id=RgAAAACFMIZq8d7LTqcPs%2bRZA5g%2bBwBDDZWeCojSQZ1bZZ7Ga%2fkWAAAAeCc6AABDDZWeCojSQZ1bZZ7Ga%2fkWAA5iTbjpAAAJ
User host address: 192.168.7.11
User: Munendra Pal Gangwar
EX Address: /o=First Organization/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=mp_gangwar
SMTP Address: [email protected]
OWA version: 8.1.336.0
Mailbox server: PFCDELEXCH01.PFCDOMAIN
Exception
Exception type: Microsoft.Exchange.Data.Storage.VirusMessageDeletedException
Exception message: Could not get properties.
Call stack
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.InternalLoad(PropertyDefinition[]
properties, Boolean forceReload)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties, Boolean canSaveOrDisposeMapiProp)
Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag..ctor(StoreSession
session, MapiProp mapiProp, Origin origin, PropertyDefinition[]
autoloadProperties)
Microsoft.Exchange.Data.Storage.Item.InternalBindItem(StoreSession
session, StoreObjectId itemId, Byte[] changeKey, ItemBindOption
itemBindOption, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, ItemBindOption itemBindOption,
PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Data.Storage.Item.InternalBind[T](StoreSession
session, StoreId id, PropertyDefinition[] allPropsToLoad)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](StoreSession
storeSession, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, Boolean forceAsMessageItem,
PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Core.Utilities.GetItem[T](UserContext
userContext, StoreId storeId, PropertyDefinition[] prefetchProperties)
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.LoadMessage()
Microsoft.Exchange.Clients.Owa.Basic.EditMessage.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Inner Exception
Exception type: Microsoft.Mapi.MapiExceptionVirusMessageDeleted
Exception message: MapiExceptionVirusMessageDeleted: Unable to get
properties on object. (hr=0x80004005, ec=1294) Diagnostic context:
Lid: 18969 EcDoRpcExt2 called [length=479] Lid: 27161 EcDoRpcExt2
returned [ec=0x0][length=422][latency=15] Lid: 23226 --- ROP Parse
Start --- Lid: 27962 ROP: ropOpenMessage [3] Lid: 17082 ROP Error:
0x50E Lid: 26977 Lid: 21921 StoreEc: 0x50E Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
1238 Remote Context Overflow Lid: 14164 StoreEc: 0xFFFFFA1D PropTag:
0x672D0003 Lid: 8660 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid:
21970 StoreEc: 0x8004010F PropTag: 0x672D0003 Lid: 23921 StoreEc:
0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x672F0014 Lid: 23921
StoreEc: 0x3EC Lid: 21970 StoreEc: 0x8004010F PropTag: 0x6708000B Lid:
21970 StoreEc: 0x8004010F PropTag: 0xE960102 Lid: 21970 StoreEc:
0x8004010F PropTag: 0x6708000B Lid: 21970 StoreEc: 0x8004010F PropTag:
0xE960102 Lid: 21970 StoreEc: 0x8004010F PropTag: 0x67760102 Lid:
25394 Lid: 19506 Lid: 27698 Lid: 11285 StoreEc: 0x50E Lid: 21970
StoreEc: 0xFFFFFC07 PropTag: 0x30080040 Lid: 25818 Lid: 6153 StoreEc:
0x50E Lid: 25906 Lid: 5249 StoreEc: 0x50E Lid: 1750 ---- Remote
Context End ---- Lid: 27962 ROP: ropGetPropsSpecific [7] Lid: 17082
ROP Error: 0x4B9 Lid: 26465 Lid: 21921 StoreEc: 0x4B9 Lid: 27962 ROP:
ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
26426 ROP: ropGetPropsSpecific [7] Lid: 1750 ---- Remote Context End
---- Lid: 26849 Lid: 21817 ROP Failure: 0x4B9 Lid: 20385 Lid: 28577
StoreEc: 0x50E Lid: 32001 Lid: 29953 StoreEc: 0x50E
Call stack
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32
hresult, Object objLastErrorInfo)
Microsoft.Mapi.MapiProp.GetProps(PropTag[] propTagsRequested)
Microsoft.Exchange.Data.Storage.MapiPropertyBag.GetProperties(IList`1
propertyDefinitions)I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
of almost every corporate confidentiality clause I have ever seen!! go figure......
Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
Brent
I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
Thanks for yours help. -
Hello all,
I got a problem in data storage and read. I used the combination of "Open data storage", "Write data" and "Close data storage" to store some data as an array as shown below.
And used the inverted combination to read data as shown below:
As shown the data file is in tdm form. This works fine in my computer, both the VI and the stand alone application. However when I run the stand alone application in a target pc, the storage file can't be generated!
I don't know if it's the problem of my code or the problem of the target pc, since the target pc has tiny memory card with few drivers installed. I'm wondering if anybody could help me fix this problem. If there's other way I can store and read the file? or if I can make the target pc generate the tdm file.
Thanks!
Chao
Solved!
Go to Solution.What error is being presented when the file isn't being generated? Is it an error with permissions? Or an error with a folder not existing? Can you manually make a file in the location where you expect the file to be generated?
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
...errors with the following output:
An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
es..
+ CategoryInfo : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], CasHealthStorageErrorException
+ FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG. The command works well if run a CAS server in the active DB site.Hi,
Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
https://www.testexchangeconnectivity.com/
Thanks,
Simon Wu
TechNet Community Support -
Treo 755p The free data storage space on the device is low. Some data could not be saved
After having the Treo 755p device for only a week, I am receiving a message "The free data storage space on the device is low. Some data could not be saved." I have over 55 mb of free space according to the device info page. I cannot find anything about this in the knowledge library, can anyone offer help?
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)My problems are similar to Lauren, but backwards. For months now I have had problems with my Treo 755 reseting randomly. Sometimes during calls, sometimes while typing, sometimes while just sitting in the holster. As many as a dozen a day and then not at all for 2 weeks, no rhyme nor reason. This Free Space error though is brand new to me today and quite strange. The error is showing up when I bring my phone out of "sleep". I press the end button to sleep the phone and everything is fine. When I press it again to wake the phone up the error is sitting behind the keylock waiting for me.
Obviously I have done nothing yet for this new memory error, but I've tried everything for the reseting. Deleting software, Soft and hard resets, software updates, everything I and Sprint support can think of. With this new Free space error now I am going to just take it to a service center and demand a new phone. I think there is some kind of hardware error as I have done nothing in the programming. No new programs, no deleted programs, no changed settings.
I loved my Treo 650 and never had any problems with it. I am getting very disappointed in Palm now though with these ridiculous problems.
Post relates to: Treo 755p (Sprint) -
How to acces and display datas storaged in cache for a SUP 2.0 workflow?
HI to all.
I have an application with a item menu which obtains data thought a online request. the result is shown is a listview.
My problem is when my BlackBerry has no conection ( offline scenario). When I select the menu item, I obtain an error.
How to acces and display datas storaged in cache for my MBO? I have read that I can use getMessageValueCollection in custom.js to access to my datas but once I get the datas, How can associate those datas to a Listview like a online request?? Do i have to develop my own screen in html or how?
Thanks.I'm not entirely clear on what you mean by "cache" in this context. I'm going to assume that what you are really referring to is the contents of the workflow message, so correct me if I'm wrong. There is, in later releases, the ability to set an device-side request cache time so that if you issue an online request it'll store the results in an on-device cache and if you subsequently reissue the same online request with the same parameter values within that timeout period it'll get the data from the cache rather than going to the server, but my gut instinct is that this is not what you are referring to.
To access the data in the workflow message, you are correct, you would call getMessageValueCollection(). It will return an object hierarchy with objects defined in WorkflowMessage.js. Note that if your online request fails, the data won't magically appear in your workflow message.
To use the data in the workflow message to update a listview, feel free to examine the code in the listview widgets and in API.js. You can also create a custom listview as follows:
function customBeforeNavigateForward(screenKey, destScreenKey) {
// In this example, we only want to replace the listview on the "My Approvals" screen
if (destScreenKey == 'My_Approvals'){
// First, we get the MessageValueCollection that we are currently operating on
var message = getCurrentMessageValueCollection();
// Next, we'll get the list MessageValue from that MessageValueCollection
var itemList = message.getData("LeaveApprovalItem3");
// Because its a list, the Value of the MessageValue will be an array
var items = itemList.getValue();
// Figure out how many items are in the list
var numOfItems = items.length;
// Iterate through the results and build our list
var i = 0;
var htmlOutput = '<div><ul data-role="listview" data-theme="k" data-filter="true">';
var firstChar = '';
while ( i < numOfItems ){
// Get the current item. This will be a MessageValueCollection.
var currItem= items<i>;
// Get the properties of the current item.
var owner = currItem.getData("LeaveApprovalItem_owner_attribKey").getValue();
var type = currItem.getData("LeaveApprovalItem_itemType_attribKey").getValue();
var status = currItem.getData("LeaveApprovalItem_itemStatus_attribKey").getValue();
var startDate = currItem.getData("LeaveApprovalItem_startDate_attribKey").getValue();
var endDate = currItem.getData("LeaveApprovalItem_endDate_attribKey").getValue();
// Format the data in a specific presentation
var formatStartDate = Date.parse(startDate).toString('MMM/d/yyyy');
var formatEndDate = Date.parse(endDate).toString('MMM/d/yyyy');
// Decide which thumbnail image to use
var imageToUse = ''
if (status == 'Pending'){
imageToUse = 'pending.png';
else if (status == 'Rejected'){
imageToUse = 'rejected.png';
else {
imageToUse = 'approved.png';
// Add a new line to the listview for this item
htmlOutput += '<li><a id ="' + currItem.getKey() + '" class="listClick">';
htmlOutput += '<img src="./images/' + imageToUse + '" class="ui-li-thumb">';
htmlOutput += '<h3 class = "listTitle">' + type;
htmlOutput += ' ( ' + owner + ' ) ';
htmlOutput += '</h3>';
htmlOutput += '<p>' + formatStartDate + ' : ' + formatEndDate + '</p>';
htmlOutput += '</a></li>';
i++;
htmlOutput += '</ul></div>';
// Remove the old listview and add in the new one. Note: this is suboptimal and should be fixed if you want to use it in production.
$('#My_ApprovalsForm').children().eq(2).hide();
$('#My_ApprovalsForm').children().eq(1).after(htmlOutput);
// Add in a handler so that when a line is clicked on, it'll go to the right details screen
$(".listClick").click(function(){
currListDivID = $(this).parent().parent();
$(this).parent().parent().addClass("ui-btn-active");
navigateForward("Request_Details", this.id );
if (isBlackBerry()) {
return;
// All done.
return true; -
Hi!
I'm trying to have an analog square wave input determine where data gathered from a second analog input channel is stored. I want data to be stored to one array during the high signal period of the square wave and data to be store to another array during the low signal period of the square wave. The square wave I'm using is of constant frequency (8.3 Hz). I believe I need to use an analog input wave as opposed to a onboard clock or other timing mechanism because my square wave is also being used to modify the input going into my experimental setup. Thus the data storage needs to be correlated to the timing of the data modification in the experiment. I tried to use the retriggerable property node function, but receive error 200452, which I think means that my PXI card (6115) can't support this retriggerable function. So I'm looking for other ways to accomplish alternating data storage in response to an incoming analog square wave. Any help would be GREATLY appreciated... Thanks! (I'm also quite new with LabView so toddler-type explanations would probably be most useful )
-Shari
(LabView version 8.6)
Attachments:
Pulsed_Acq_Switch_Simplified.vi 47 KBHello Shari,
I am looking at your situation and it seems very intriguing. after downloading your file I have a couple questions to ask if you don't mind answering.
Currently in your program you are only taking one sample of data at a time, this could lead to uneven sampling. Would you like to sample at a consistent rate (say 10 Kilosamples of data a second?) if so what type of card are you using?
Also, Do you want your data to be in a 2-D array of data?
Best Wishes,
Daniel -
Segmentation Builder Using ADS -Analytical data Storage
Hi -
We are using ADS -Analytical Data Storage in Segement Builder. ADS brings in info objects from BW and then Infoset is created on that ADS .Infoset is then used as Data Source in Segment Builder. We are looking for some information on following. Any help will be greatly Appreciated -
1.Is any other customers using ADS (Analytical Data source) in Segmentation builder , and how their experience has been ?
2. We have large number of records, in millions which will be pulled from BW to CRM ADS. Can there be any performance issues, are there any know issues ?
3. Keeping in mind the performance issue, we haves divided ADS into several tables. However number of records in one table can be much more than other tables as these tables correspond to different customer types. What should be the optimal no of records in one table ? Is there any better way to define ADS ? -
Your help is greatly appreciated.
Thanks. - MPHello Mohanpreet,
We are pushing data from BW to CRM for subsequent generation of BP in CRM system ; and for this we are exploring APD functionality.
I am using ADS adapter in CRM and have made proper entries in CRM system( ref. screen 'Release data target adapter' in CRM system)
Now, when I go back to BW system and start to design my landsape in APD trnx. ; there I'm selecting CRM as my target system - which is connected to BW via RFC.
The problem come when I'm trying to deifne attributes of CRM system then while selecing 'ADS as traget adapter' I"m getting an error as " CRM error : Adapter 'ADS' not known " !!!
How do I solve this error. I'm totally stuck up at this point.
Please advice. Due points will be awarded.
Rgds,
Ak- -
internal error Workbook storage fault: 310
Hi matez,
I obtain the below mentioned error when I attempted save my query as a workbook
<b> <internal error> Workbook storage fault: 310</b>
Kindly adviceHi,
Note 592918 has all the answers for you, it's an authorisation problem !
Kind regards, Patrick Rieken.
Note 592918:
Symptom:
When you open BW workbooks, one of the following error messages "Workbook storage fault: 1310", "<internal error> document storage 310" or "<internal error> Workbook storage fault: 310" appears. The workbook does not appear.
Other terms
Business Explorer, 30A, 30B, 31C, workbook, 1310, 310
<internal error> workbook storage fault : 310
workbook storage fault: 1310
<internal error> document storage 310
Reason and Prerequisites
The user has no authorization object S_GUI with the activities 60 (Import) and 61 (Export).
Solution
Authorization for opening and saving BW workbooks
1. Start role maintenance transaction (PFCG)
2. Select role
3. Choose "Change" button
4. Select tab "Authorizations"
5. Choose "Change authorization data"
6. Choose "+ manually"
7. Enter "S_GUI" as "authorization object"
8. Expand "Authorization for GUI activities"
9. Under "Activity", select at least "60" (import) and "61" (export)
Maybe you are looking for
-
I have a new table, the PK is a varchar2(5) column, when I allow the default query in the report to do its work, I get all the expected data. when I click on the edit icon (pencil), I get an error screen indicating ORA-01403: no data found. I'm hos
-
Error while running Oracle 11i OA page in JDeveloper 10g.
Hi All, I have to do some customization in isupplier page. The page is working well in Oracle 11i instance. Now we are upgrading the Oracle 11i to R12. So I check out the entire project (i copied whole myprojects folder) and try to run the same proje
-
Struts, Best proctices to show data from database in view
Hi, I am using Struts. I need to show a result of select operation, some 50-60 records like a grid. Best method to transfer ResultSet data to View(jsp) from the Action's execute method. Is it a right way to use a collection of objects, that contains
-
I have a php file that holds a certain variable (the name of an image). Then I have a SWF that shows the location of the file and then shows the actual picture itself. Here is a snippet from the PHP file: quote: print("&location=$image"); Below is my
-
i can't download after effects