Error de llamada

Buenas tardes,
Tengo actualmente un iPhone5 actualizado a ios 6.02, anteriormente tenia un iPhone4 con ios 5.1 y el los dos telefonos tengo el mismo problema:
Aleatoriamente, cuando reliazo una llamada, al cabo de 1 minuto se corta y aparece un mensaje "error en llamada" no pasa siempre pero es muy molesto y pasa en diferentes sitios con muy buena cobertura.
He restablecido los ajustes de red, cambiado sim, actualizado ios... y sigue pasando lo mismo.
Mi operador es Movistar.
Espero alguna solución.
Gracias.

Saludos a todos, leyendo estos post la conclusión a la que llego es la siguiente:
Empecé con un iphone 4s que me empezó a dar ese problema durante dos años, hace un par de días cambié por iphone 5s y oh que sorpresa al ver que el problema continua. considero que no solo el error esta migrando con la copia de seguridad sino también con el cambio de microsim a nanosim. por ahora el problema se presenta siempre que el celular se apaga o se pierde la señal del operador, es decir que si nunca lo apago y nunca pierdo la cobertura pues nunca molesta. pero lamentablemente existen lugares, incluso dentro de la ciudad, donde no tienes señal o se descarga el equipo entonces viene el problema. La solución que tengo es que voy a ajustes/telefono/mostrar ID de llamada y listo queda funcionando hasta que vuelva a apagarse o perder cobertura.
si alguien conoce de una solución definitiva que no implique perder el backup les agradezco.
soy usuario Claro en Bogotá - Colombia

Similar Messages

  • Cuanto consume una llamada facetime por medio de datos moviles

    Cuantos MB de internet consume una llamada facetime mediante una red de datos mobiles??

    Saludos a todos pues me sumo al problema de error de llamada y en ocasiones me pasa que cuando me marcan entra el buzón como si lo tuviera apagado cuando tengo toda la señal, para colmo no me hacen la garantía valida en México pues el iphone lo compre en appstore en San Antonio (usa) en fin lo que he detectado hasta ahora, cuando me pasa el error solo me voy a ajustes/teléfono/Mostrar ID de llamada, en mi casa (Telcel) no se puede desactivar pero con solo entrar y ver que esta activada las llamadas entran y salen de nuevo por algún tiempo, en ocasiones días en ocasiones horas, lo segundo que probé fue ir a telecel probaron el chip en otro teléfono funciono bien probaron otro chip en mi equipo y fallo por lo que se deslindaron y me dijeron que fuera a donde lo compre así que fui a apple y pues porque lo compre en usa no me hicieron la garantía pero si te lo cambian si lo adquiriste en México yo tendría que ir a usa para hacerla valida (bonita cosa), así que restaure el equipo y lo deje como equipo nuevo, no metí copia de seguridad ni nada y el teléfono no fallo, pues bien lo que concluyo es que la copia de seguridad viene cargada con el problema y cada que la carguemos va a fallar de nuevo, que hice? pues cargue una copia de seguridad, la más antigua que pude para perder lo menos posible de datos y hasta ahorita (horas de prueba) el teléfono no me ha fallado para nada, espero así sigua y le sirva a alguien mi experiencia, saludos y suerte!!!!

  • Support about using PL with Adapter (WebService)

    Hi,
    My Name is Antonio Cejudo, i have a problem with PL execution through an adapter because when a test run, the adapter try to do commit and PL too. The adapter send the next message:
    The selected operation execute could not be invoked
    An Exception ocurred while invoking the webservice opration. Please see logs for more details
    Hide Additional Trace Information
    Java.lang.Exception:
    oracle.sysman.emSDK.webservices.wsdlapi.SOAPTestException:Se ha producido
    una excepcion al llamar al enlace de JCA: ""JCA Binding execute of Reference
    operation 'PLTaar08Individualiza' failed due to :Error  de llamada al procedimiento
    almacenado. Error al intentar preparar y ejecutar el API
    DBO.PKG_TRASP_INDIVRECEPTORA.PRC_PROCESA. Se ha producido un error al preparar y ejecutar la API
    DBO.PKG_TRASP_INDIVRECEPTORA.PRC_PROCESA. Causa: java.sqlException: ORA-04068: se ha anulado el estado
    existente de los paquetes ORA-04061: el estado existente del package body
    *"DBO.PKG_TRASP_INDIVRECEPTORA" ha sido invalidado ORA-04065: package body*
    *"DBO.PKG_TRASP_INDIVRECEPTORA" no se ha ejecutado por que se ha modificado o borrado ORA-06508: PL/SQL:*
    no se ha encontrado la unidad de programa llamada: "DBO.PKG_TRASP_INDIVRECEPTORA" ORA-06512: en linea
    *1 Asegurese de que la API esta definida e la base de datos y que los parametros coinciden la firma de*
    la API. Esta excepcion se considera no recuperable debido a un error de modelado. Para clasificarlo
    como recuperable en su lugar ,agregue la propíedad nonRetriableErrorCodes con el valor "-4068"
    al descriptor de despliegue (es decir, weblogic -ra.xml)
    I found that if i use next instruction in the PL, the message stop showing, but the execution of the PL is not stable (Sometimes ok sometimes not ok):
    PRAGMA AUTONOMOUS_TRANSACTION
    The Question is, Are there some way to setup the adapter to avoid the execution of the adapter’s commit ??
    Thank for your help

    I suggest you look at the error code to see what is the problem. Ex
    http://oraclequirks.blogspot.com/2007/03/ora-04061-existing-state-of-package-has.html
    If you do not sant commit, throwing an exception can help.

  • Pierdo la cobertura continuamente

    mi iphone pierde la cobertura continuamente, no soy capaz de mantener una conversacion durante mas de 5 min, me da error de llamada y reintentar. ¿ que puedo hacer para solucionarlo ?

    tal vez hay un problema con el iphone. si uno está cerca de usted, llevarlo a un Apple Store para obtener el teléfono comprobado

  • ORA-29913: error al ejecutar la llamada de ODCIAGGREGATEMERGE

    Why I can create this view on 11g and i receive this error on 10g?
    SQL> CREATE MATERIALIZED VIEW SGPCVM_PARCELAS
       2  NOCACHE NOPARALLEL BUILD IMMEDIATE
       3  USING INDEX TABLESPACE PERSPECTIVAS_IDE_I PCTFREE 0
       4  REFRESH ON DEMAND COMPLETE USING ENFORCED CONSTRAINTS
       5  DISABLE QUERY REWRITE  AS SELECT /*+ index(R SGPC_RECINTOS_PK)  index(RG SG
    PC_RECINTOS_GEOM_PK) */
       6      R.CD_PROVINCIA,
       7      R.CD_MUNICIPIO,
       8      R.CD_POLIGONO,
       9      R.CD_PARCELA,
      10      SDO_AGGR_UNION(SDOAGGRTYPE(RG.SD_GEOM,0.0005)) AS SD_GEOM,
      11      SUM(RG.NU_SUPERFICIE) AS NU_SUPERFICIE,
      12      SUM(RG.NU_SUPERFICIE_ADM) AS NU_SUPERFICIE_ADM,
      13      SUM(RG.NU_PERIMETRO) AS NU_PERIMETRO
      14  FROM EQ_SIGPAC_IDE.SGPCD_RECINTOS R,
      15      EQ_SIGPAC_IDE.SGPCD_RECINTOS_GEOM RG
      16  WHERE R.IU_FH_BAJA_RECINTO IS NULL
      17      AND R.ID_RECINTO_GEOM = RG.ID_RECINTO_GEOM
      18  GROUP BY CD_PROVINCIA, CD_MUNICIPIO, CD_POLIGONO, CD_PARCELA;
         SDO_AGGR_UNION(SDOAGGRTYPE(RG.SD_GEOM,0.0005)) AS SD_GEOM,
    ERROR en línea 10:
    ORA-29913: error al ejecutar la llamada de ODCIAGGREGATEMERGE

    Puede deberse a que tienes otra instalación previa desinstalada o no. El instalador comprueba varios archivos y si detecta cree encontrar información sobre una instalación previa, no prosigue.
    Intenta de todos modos desde el Panel de Control si estas en Windows, desinstalar el instalador de Adobe, de paso comprueba que no tengas una instalación anterior, reinicia el ordenador, e intenta todo de nuevo.

  • I have a problem "error en la llamada"

    I have a problem "error en la llamada"

    I am having similar problems - cannot export a video made w/ iOS7 on iPhone 5 and imported into iPhoto.latest and it refuses to export the video "cannot prepare video for export..." message.....I have completely re-built the iPhoto database with the latest tools, made a backup copy and am unable to extract this video from the original or the backup copy. The only way I can get videos off my phone is to post them as part of my PhotoStream, which is limited to 5min of video (of which the one I want to post is 7.5min)...can someone at Apple please address this?

  • Actualice mi iphone 4s y sigue el error en la llamada, como lo quito?

    Actualmente descargue las actualizaciones del iOs a mi iphone 4s y me sigue presentando el error en la llamada, generalmente usando el prefijo *31# y despues el numero al que deseo hablar me saca la llamada, pero hoy que estoy fuera de mi ciudad de residencia, me es completamente imposible llamar a algun lado.
    Alguna solucion???

    Hola! ARKANGEL-84, No se puede usar la red móvil únicamente, sólo se activa y cuando llega a un nivel de señal 3G muy bajó se desactiva o se cambia a EDGE por un tiempo hasta encontrar suficiente cobertura mínima para ejecutar red 3G. Para ello tienes que ir a: Ajustes>Datos Móviles>Activar 3G y listo. Ten en cuenta que la tecnología 3G acelera los datos móviles en caso de cargar una imagen o descargar música y eso lleva a un consumo mucho mayor de batería, lo cual se recomienda activar en caso de necesidad o urgencia.

  • Por qué se presenta error en la llamada

    Al restaurar el backup del iPhone 4S a un 5, he podido recibir llamadas, pero no realizarlas porque constantemente presenta: "error en la llamada". Cuál es la razón a esto?

    Hola a todos...!!!
    A mí me ha pasado lo mismo, tengo 2 días sin poder hacer una sola llamada, funciona mi servicio de datos y recibo llamadas.
    Es la segunda vez que me pasa, la primera vez no pude realizar llamadas por 3 horas, pero esta vez llevo casi dos días y no se puede tener un teléfono solo para recibir llamadas, mucho menos éstos.
    Apple debería de brindar una solución...!!!

  • Porque no sirve el facetime, en la tarde si sirvio por primera vez y ahora ya no sirve, se corta cuando se esta enlazando la llamada y dice "error de facetime". Alguien me podria ayudar porfavor

    alguien ayudeme porfavor

    Try the troubleshooting here: iOS: Troubleshooting FaceTime and The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems or iOS: Using FaceTime

  • BAPI_SALESORDER_CHANGE. Error V1 045 -- Indicate number of document.

    Hi Experts.
    When a pre-order (ZAG) it's confirmed in SAP, we make an oficial order (TA), then, when save the oficial order I need delete the field LCNUM in pre-order.
    I'm using this BAPI, in a USER EXIT inside program SAPVM45A, when the number of document it's the pre-order.. but it failed, and return to me the message error that I don't indicate the number of document.
    I find where it's the fail, when called to this function
      call function 'SD_SALES_DOCUMENT_READ'
    there is a moment in the code with that
    VBAK-VBELN = DOCUMENT_NUMBER.
      PERFORM BELEG_LESEN(SAPMV45A).
      PERFORM KONV_SELECT(SAPFV45P).
    Well, when called the perform BELEG_LESEN, ---> VBAK-VBELN LOST , yes I tell you the true..., LOST the value of the pre-Order...
    I think that when I call this function it's while save a order, program lost the value
    Example of the code:
    l_saledocument = v_vbelv. "Number of pre-po
              l_order_header_in-doc_num_fi = l_lcnum. "l_lcnum it's empty because I want update INITIAL in pre-po
              l_order_header_inx-doc_num_fi = 'X'.
              l_order_header_inx-updateflag = 'U'.
           Llamada a la bapi
              CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
                EXPORTING
                  salesdocument    = l_saledocument
                  order_header_in  = l_order_header_in
                  order_header_inx = l_order_header_inx
                TABLES
                  return           = li_return.
              READ TABLE li_return WITH KEY type = 'E'.

    Hi Pedro,
    have a look to SAP Note 1232196.
    You have to call FM SD_SALES_DOCUMENT_INIT before calling BAPI
    Hope it helps
    Lorenzo

  • Applicatio​n using Http Post... getting error response

    Im from Ecuador, and me and other 4 people from the same country are getting this error response when a native java application is trying to make a http post to mydomain.com
    The requested URL could not be retrieved:
    While trying to process the request:
    POST /somedir/more?var1=abc&var2=xyz& HTTP/1.1
    Expect: 100-continue
    Host: mydomain.com
    Content-Length: 40
    Content-Type: text/plain; charset=utf-8
    Accept: */*
    Connection: close
    Invalid request. Some aspect of the HTTP Request is nivalid. Possible problems:
    Missing or unknwon request method
    Missing URL
    Missing HTTP Identifier (HTTP/1.0)
    Request is too large
    Content-Length missing for POST or PUT request
    Generated by Blackberry.Internet.Browsing.Service (squd/2.7.STABLE6)
    This issue is only happening in my country (Ecuador). I have some friends in Argentina and they have no problems at all. What are the posible causes for this problem?
    Message Edited by andufo on 07-09-2009 08:43 PM

    Hi again,
    im attaching all the info you request:
    What does the program actually do?
    Social network (because of the TOS of this forum im not allowed to post project names or urls)
    What is it trying to send when you submit a request?
    What url is it posting the information to? 
    Im attaching all this at the end of the post.
    Is it the 'exact' same application that works in other countries?
    Yeap, the exact same one...
    Is it supposed to be useing the Internet Browser?
    No, it is a native app. The Browser is not used at all.
    Are you on a BlackBerry Enterprise Server? 
    Im on BIS, all the users use BIS.
    Technical details:
    1) The app makes an Http Connection (POST) to:
    http://mydomain.com/api/call?param1=abc&param2=xyz
    2) This is the Http connection configuration:
    httpConnection = (HttpConnection) Connector.open(url);
    HttpConnection.POST;
    ("Content-Type", "text/plain; charset=utf-8");
    ("Host", 'mydomain.com');
    ("Content-Length", 100); //depends on sent data
    ("User-Agent", 'BlackBerry8300... etc');
    ("Expect", "100-continue");
    3) On every country it works fine... on my country i get this error:
    The requested URL could not be retrieved while trying to process the request:
    POST /app/llamada?param1=abc&param2=xyz& HTTP/1.1
    - Expect: 100-continue
    - Host: mydomain.com
    - Content-Length: 100
    - Content-Type: text/plain; charset=utf-8
    - Accept: */*
    - Connection: close
    Invalid request. Some aspect of the HTTP Request is invalid. Possible problems:
    - Missing or unknwon request method
    - Missing URL
    - Missing HTTP Identifier (HTTP/1.0)
    - Request is too large
    - Content-Length missing for POST or PUT request
    Generated by Blackberry.Internet.Browsing.Service (squid/2.7.STABLE6)

  • User authentication error with Proxy Java Calling web Service in XI

    Hello,
    I have deploy a Web Service in SAP XI 3.0. within a SOAP sender adapter.
    I have also created the Proxy Java Class to access the webservice in the Developer Studio and a Plain Java Class (only with a method main) which uses the proxy classes to consume the web service.
    But when I launch the program a get the next error message:
    java.rmi.RemoteException: Service call exception; nested exception is:
         com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
         at com.everis.serviciosweb.xi.MI_OUT_STATUSBindingStub.MI_OUT_STATUS(MI_OUT_STATUSBindingStub.java:73)
         at com.everis.llamadas.invocacionWSStatus.main(invocacionWSStatus.java:76)
    Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage
    Where MI_OUT_STATUSBindingStub is my Stub Class.
    I have tried to set USERNAME_PROPERTY and PASSWORD_PROPERTY at runtime from my Stub class to the values that I use to access SAP XI (Integration Repository & Integration Directory) but it still doesn't´t work.
    Have anyone a solution?
    Thanks.

    Hi,
        finally I have fixed it.
    The root of the problem was on the way that I proceed with the generation of wsdl in Integration Directory.
    The second step in the wizard for generation of wsdl ask for a url to call the web service and gives you an option to complete the url automatic. I have use this option and it have proposed my an url of type http://<host>:<port>/sap/xi/engine?entry=.......
    But the SOAP adapter call is in the form http://<host>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<business service>:<channel>
    So using this type of url in the generation of wsld solves all the problems.
    Regards,
    Antonio.

  • Error 430 en XL reporter

    Actualice a 2007 PL46 en mi servidor de citrix con windows server 2008 y cuando quiero abrir XL reporter me manda el siguiente error:
    Run Time Error '430':
    Class Does not support automation or does not support expected interface
    y en mi servidor de SAP si lo puedo abrir sin problema, otra caracteristica es que antes de la actualizacion tenia SAP BO 2007 PL42 y XL Reporter si abria correctamente.
    alguien sabe como corregir esto.

    Hola, tal como menciona Yeniffer, hay una nota SAP que menciona este problema:
    1247315 Runtime error 430
    Tiene que ver con problemas en el DI API, instalación anterior del XL o instalación de cliente SB1 corrupta.
    La solución recomendada para eliminar los problemas anteriores, es:
    0. Cerar todas las palicaciones.
    1. Ir al panel de control, agregar / elimnar programas
    2. Desinstalar el Cliente SB1
    3. Desinstalar SAP Business One DI API
    4. Si aparece XL Reporter, desinstalarlo también.
    5. Ir a Inicio, Ejecutar, escribir %temp% y oprimir la tecla Enter.
    6. En la ventana que se abre, si existe eliminar la carpeta SM_OBS_DLL.
    7. Ir a Inicio, Ejecutar, escribir regedit y oprimir Enter.
    8. Buscar en la categoría HKEY_LOCAL_MACHINE, Software, una carpeta llamada iLytix. Si existe eliminarla.
    9. Reiniciar el PC.
    10. Verificar que estén instalados .NET Framework 1, 2 (y 3.5 si tiene Crystal Reports), SQL Native Client. Si no, instalarlos
    11. Instalar DI API que viene con el actual PL.
    12. Instalar Cliente SB1.
    13. Verificar comportamiento.
    Esperamos que con esto se solucione el problema.
    Si el problema fué resuelto, favor cerrar el caso. Gracias
    Edited by: Hector Daniel Hernandez Bacca on Sep 11, 2009 1:54 PM

  • ¿Cómo solucionar el Error 16 de Acrobat XI Pro en Windows 8?

    He descargado la versión de prueba de dicho software a través de el Asistente de Descargas de adobe, lo he instalado y todo ha funcionado correctamente hasta el momento de intentar iniciar la aplicación, donde aparece un mensaje que me informa que no ha sido posible arrancar producto de un "Error 16". No existe documentación de este error para Windows 8. Solicito ayuda lo antes posible.
    Gracias.

    No indicas si tienes o has tenido versiones anteriores de Acrobat instaladas.
    Mi consejo es que desinstales el programa desde Panel de Control y reinicies el ordenador.
    Busca en Labs.adobe.com una utilidad llamada Acrobatcleaner, instalala y ejecutala. Reinicia el ordenador e intenta instlar de nuevo el programa.
    Confirma si logras que funcione. Por favor marca tu pregunta como solucionada entonces. Gracias.

  • Error Business Server Page (BSP)

    Hi.
    I am new to BSP.
    I have a Z_CRM_IC application and I am traying to create a new page to display into a pop-up window.
    I created a new page with flow logic type, and I include in iRecReason.htm a javascript function that open a pop-up window and activated the new page
    When run IC and select a link doesnt work.
    When a push a link the pop-up is opened but send a page error with this message:
    Error Business Server Page (BSP)
    ¿Qué ha sucedido?
    La llamada de la página PCS se ha interrumpido debido a un error
    |----
    |Nota
    |El texto de error siguiente se ha procesado en el sistema:
    |----
    Clase error:
    Su equipo de SAP Business Server Pages
    Please anybody has an idea about this problem...
    Thanks.
    Adrian

    Hi,
    Probably the javascript you are using is incorrect.There are two ways of calling your page from a link via navigation:
    1.Through defining navigation ie through creating inbound outbound plugs and a nvaigational link
    2.If you know the URL of the link and just want to call that on click..
    heres how it goes:
    1.
    For creating a navigational link follow the cookbook.Section 5.6
    2.
    In case you have a fixed URL use following code:
    <crm_bsp_ic:link id="link1" reference="http://www.google.com" target="_blank" text="Ext Link"></htmlb:link>
    thanks,
    ashish.

Maybe you are looking for