Error--Define 1000/15/99 first as a general sales area!
Hi All Gurus,
I have defined sales area,made assignment,combined sales org.,distribution channel and division,made common distribution channel and division but when I goto OVAZ that is sales area assignment to sales doc.type it is giving this error---Define <1000/15/99> first as a general sales area!
Let me tell u I have used all these transaction OVAO,OVAM,OVAN,OVAZ,VOR1 & VOR2 ....is there any other t/code which resolve the above problem
Thank & regards
Umed
Dear Umed,
This is a sequence infringement of Customizing activities.
Once, You created Sales Org and Dist Chnl in IMG-Settings, i.e.
SPRO --> IMG --> Enterprise Structure --> Definition --> Sales and Distribution
--> Define Sales Org
--> Define Dist. Chnl
Also, create Division:
SPRO --> IMG --> Enterprise Structure --> Definition --> Logistics - General --> Define Division
Once, Enterprise Definition is Done, we make assignment:
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution
--> Assign Dist. Chnl to Sales Org
--> Assign Division to Sales Org
--> Set Up Sales Area
and Finally, we Maintain Following settings in sequence:
OVAO: Define reference S. Org. - assign the same sales org to it, i.e, 1000 to 1000
OVAM: Define reference D. Chl. - assign Sales Org+Dist channel, i.e. 1000+15 to 15
OVAN: Define reference Dvn. - assign Sales Org+Division, i.e. 1000+ 99 to 99
OVAZ - Assign Sales Document Type to permitted sales Area.
Now, you get the error:
Define <1000/15/99> first as a general sales area!
As per my understanding, you must check and maintain Assignment, via:
OVXK Assignment: Distr. Channel --> Sales Org
OVXA Assignment: Division --> Sales Org
OVXG Set Up: Sales Area: Overview
and then make assignment in OVAZ.
Please, check the same and update.
Best Regards,
Amit
Similar Messages
-
Define 1200/80/30 first as a general sales area!
Hi Friends,
During assignment of Sales order, I am getting the error "Define <1200/80/30> first as a general sales area!".
I have already assign the sales area in Assignment as well as have already defined the common distribution channel and commom division also.
Please suggest to overcome from the issue.
KRaheja.Referrence to Murali Mohan.Tallapaneni.
1.You go to VOR1 transaction here you check what is the distribution channel assigned as common distribution channel for your sales organisation and distribution channel ,if it is improper then maintain correct Distribution channel.
2.You go to VOR2 transaction here you check what is the division assigned as common division to your sales organisation and Divisionif ,it is improper then maintain correct Division.
3.You go to OVAO transaction here you assign reference sales organisation to your sales organisations.
4.You go to OVAM transaction here you assign reference distribution channel to your sales organisation and common distribution channel.
5.You go to OVAN transaction here you assign reference division to your sales organisation and common division.
6.Finally you assin sales document type to your referenced sales area. -
Message: "Define my sales area first as general sales area"
Hi gurus,
I am studying SD and I am working on my proyect, I already defined my sales area, distribution channel and division, assigned all and created the sales area, also created a sales document type, now I am going to assign the sales document for the sales area, the sales area and document type was already there but I keep getting the message "Define <my sales area> first as general sales area", I don't know what is this message about since I anready created the sales area.
ThanlsDear Antonio,
This has been discussed many a times in the forums.
Please search the forum before posting issue.
It not only gives you the solution, but also will help you learn to use the apt words to include in search criteria.
However, please go through this thread
Error--Define <1000/15/99> first as a general sales area!
Please search the forum before posting next time.
If there is any issues, please revert back after maintaining the configurations as said in the thread.
Thanks & Regards,
Hegal K Charles -
Error: No valid complaint data was found in this sales area
Hi All,
I am getting below error while delta or request download of customer.
No valid complaint data was found in this sales area
Message no. CRM_SPL_BUPA_FRG0010203
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Message no. SMW3018
Error case:
ECC-->Customer(Sold to) extended to a sales area and saved.
CRM-->Business partner gets updated in the CRM properly.
ECC--> Deletion flag for same customer and same sales area is set. (Deletion flag - "Selected sales area").
CRM-->Business partner gets updated in the CRM properly and is not shown as extended to the sales area via BP t code.
ECC-->Deletion flag is removed for the customer.
CRM--> BDOC fails to update the Partner and goes in error.
Problem comes when deletion flag is removed in ECC.
Any help would be highly appreciated.
Thanks in advance.
-RamHi Ram,
Hope you have not make any field mandatory in the Complaint tab in the sales area section in the BP.
When you are removing the deletion flag please check if any entry is mandatory in the Complaint tab.
Hope this will be useful
Thanks and Regards
DJ -
Dear all,
when I " Assign sales order types permitted for sales areas", I occur the following error message :
Define <2100/10/11> first as a general sales area!
Message no. V2127
Diagnosis
You want to define allowed sales document types for a sales area which is not maintained as a common sales area. This is a sequence infringement of Customizing activities.
where I can define the 2100/10/11 as a general sales area? please help me.Hi, MH,
Thanks for your kindly help. I check our configuration follow your sugguestion:
Set1.Img-SD-Sales-Sales Doc. Header- Assign Sales Area to Sales Doc
A. Combine Sales Organization
2200 缙云华孚 2200 缙云华孚
B. Combine Distribution Channel
2200 10 内销 10 内销
2200 20 外销 20 外销
2200 90 其它 90 其它
C. Cobine Division
2200 00 通用 00 通用
2200 01 色纺纱 00 通用
2200 02 染色纱 00 通用
2200 03 坯纱 00 通用
2200 04 OE纱 00 通用
2200 05 粗纱 05 粗纱
2200 06 棉网(条)05 粗纱
2200 07 白棉 05 粗纱
2200 08 本色纤维 05 粗纱
2200 09 染色纤维 05 粗纱
2200 10 其他 10 其他
2200 11 配棉 00 通用
D.Assign sales order types permitted for sales areas
when I assign
2200 缙云华孚 10 内销 11 配棉 ZBJ 专纺报价单
+get the follow error message:+
define <2200/10/11> first as a general sales area.
Step2. IMG - SD - BASIC FUNCTIONS - MASTER DATA -
A.Define Common Distribution Channel
2200 10 内销 10 内销 10 内销
2200 20 外销 20 外销 20 外销
2200 90 其它 90 其它 90 其它
B. Define Common Division
2200 00 通用 00 通用 00 通用
2200 01 色纺纱 01 色纺纱 01 色纺纱
2200 02 染色纱 02 染色纱 02 染色纱
2200 03 坯纱 03 坯纱 03 坯纱
2200 04 OE纱 04 OE纱 04 OE纱
2200 05 粗纱 05 粗纱 05 粗纱
2200 06 棉网(条) 06 棉网(条) 06 棉网(条)
2200 07 白棉 07 白棉 07 白棉
2200 08 本色纤维 08 本色纤维 08 本色纤维
2200 09 染色纤维 09 染色纤维 09 染色纤维
2200 10 其他 10 其他 10 其他
2200 11 配棉 00 通用 00 通用
What is wrong about my configuration? Please check it help me.
Best Regards
Passion
Edited by: Wu Passion on Nov 15, 2008 3:34 PM -
Error while assign doc type to sale area
hi,
while assigning a sale area to a doc type i am getting the following error, " define the sale area(XXXX/YY/zz) as a general sale area? i have alreadly done "set up sale area" what is general sale area and how to do it? need help.
regards
leohi
The Assignment of Sales Areas to Sales Documents
There may be a need to assign sales documents to specific sales areas. For example, a different
sales document is used for all sales orders from a specific sales organization.
Transaction Code OVAZ
You may assign reference sales organizations as well as reference distribution channels and divisions. Do not confuse this referencing with the assignment of common distribution channels and common divisions. The referencing done here is only used by the system to determine which sales documents are permitted for which sales areas.
If all sales document types can be used by all sales areas, leave the assignment fields blank.
check your sales area in
Set up sales area - Enterprise Structure ® Assignment ® Sales and Distribution ® Set up sales area
T-code: OVXG
Also check the following setting
OVAM - To Combine distribution channels Sales Document Types -- Sales and Distribution ® Sales ® Sales Documents ® Sales Document Header ® Assign Sales Area To Sales Document Types -
choose Combine distribution channels.
OVAN - To Combine division to Sales Document Types - Sales and Distribution ® Sales ® Sales Documents ® Sales Document Header ® Assign Sales Area To Sales Document Types -
choose Combine divisions
OVR1 - Define Common Distribution Channels - Sales and Distribution ® Master Data ® Define Common Distribution Channels
OVR2 - Define Common Divisions - Sales and Distribution ® Master Data ® Define Common Divisions
Regards
Vishal
Edited by: WISH on May 6, 2008 7:57 AM -
Error message: Ship-to party 1111 not defined for sales area 1000 01 50
Hi friends,
I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
When created SO, I got a error message saying " Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
Please advise where I missed configuration.
Thanks,
Linda
Edited by: LindaSAP on May 25, 2010 5:40 PMHi,
Please check the below links
Ship-to party not defined for sales area
"SHIP TO PARTY NOT DEFINED FOR SALES AREA "
Ship to party is not defined for sales area..
Ship-to party not defined for sales area
Ship-to party 147 not defined for sales area US DS 20
ship to party -sales area error
Regards
Senya -
Using PreparedStatement and the Oracle Error ORA-1000
Hi,
I have a question about PreparedStatement objects that is not so simple to explain for me. What I would like to know is: if I use a PreparedStatement following traditional and generic steps:
1- PreparedStatement pStmt = Connection.prepareStatement(sQuery);
2- pStmt.setXXX(i,j);
n - pStmt.setXXX(i,j);
n+1 - ResultSet rs = pStmt.executeQuery();
n+2 - while(rs.next()){ ... retrive ResultSet data ... }
n+3 - rs.close()
n+4 - back to point number 2
and at the end (as you can see in the point numbered n+4), instead of closing the PreparedStatement pStmt using the close() method, I reuse the PreparedStatement pStmt comeing back to the point numebr 2 and setting again all its parameters with new values ... then ... what heppens in the Oracle database ? Has been the cursor (so the mamory area), associated to my PreparedStatement object pStmt, duplicated or is it the same ?
I know that Java allows you to do this kind of operations with PreparedStatement, and I know that in tha Java Documentation is explained to follow this strategy to optimize the execution time because in this way the same PreparedStatement is precompiled and prepared only once. But if I do a for loop following the steps explained before, after many iterations I have the error "ORA-1000: maximum open cursors exceeded". This error is the reason of my question. Does this error means that it's mandatory to close a PreparedStatement always, otherwise if you reuse it without closing it then the corresponding database cursor will be duplicated ? If it is so, then I think this is a contradiction with official java documentation ...
I'm using Oracle8i (version 8.1.7) and Oracle JDBC Thin Driver (Windows NT) for use with JDK 1.2.x. Moreover, in my database istance the parameter "maximum open cursor" is equal to 800 ...
Thank you very much for suggestions :-)There is no need to close a prepared statement or its resultset for every iteration.
After the first iteration in a loop, all subsequent executions of it will close the previous resultset. By adding close() method, you are making one extra costly call to the DB for no reason.
Following is the sample code.I know what you are saying. In fact at the beginning I wrote my code in the same way of your sample (see the code of my first post at the begin of this page).
But doing so, after thousand iterations of the loop, I had "Oracle Error ORA-1000 : maximun open cursor exeeded" even if in my database istance the parameter "maximum open cursor" is equal to 8000.
At this moment in my code, for each iteration, I close the PreparedStatement and in this way I don't have anymore the error :-((
So it seems that only in theory we can reuse a preparedStatement without closing it. In fact if we see the oracle system table "$open_cursor" (as Konrad Pietzka suggest me) we can find that, for each interation,
at our line code "rs = pstmt.executeQuery();" correspond a new cursor in the database: this means that for each method "pstmt.executeQuery()" the database open a new cursor and do not use the previous one as it should.
I posted a question two months ago to search if someone had the same problem (it seems that Konrad Pietzka had the same situation) and was able to explain me what is the cause.
The only reason I found by myself for this problem, is that probably the Oracle JDBC Thin Driver for Windows NT/2000 has some bugs... but I'm not sure ...
Thank you very much for you time !!
bye :-))
Fidalma -
Ship-to party 1600 not defined for sales area 1000 10 20
Hi Friends,
I am making inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
Any pointer will be rewarded.
regardsin mm02 i have already changed the division as 00 but still getting error(looking quite strange)
same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
same error.
Any other inputs.
Regards
Edited by: Amit Kumar on Oct 29, 2008 8:39 AM -
Order type has not been defined in sales area '1000','10','00'
Hi Gurus
I am getting this error when try to create order
Order type has not been defined in sales area <'1000','10','00'>
but I checked in the configuration and assigned
SPRO:SALES:SALES : DOCUMENTS :SALE3S DOCUMENTS HEADER:
ASSIGN SALES DOCUMENT TYPES : Assign sales order types permitted for sales are :1000 -10-00
But still I am getting this problem when trying to creates sales order from va01.
Thanks
KrisSPRO --> Sales & Sistribution --> Sales --> Sales Document Header --> Assign Sales Area to Sales Document Type
The above is one option.
Also Check Sales Document Type in T.Vode: VOV8
SPRO --> Sales & Sistribution --> Sales --> Sales Document Type
whether The Sales Document Type is Block, which could also be a possible reason.
Also check the Sales Area setting.
Regards,
Rajesh Banka
Reward points if useful. -
Hey guys,
I'm configuring my access points with two SSID's through the GUI. The first is a corporate SSID and the second a guest SSID. The corporate SSID needs to be attached to native VLAN 1000. The guest SSID needs to be attached to VLAN 1234. Both SSID's / VLAN's are to use WPAv2 AES CCMP with a PSK. Although I'm getting an error message indicating that my VLAN's don't exist on ‘Radio1-802.11N 5GHZ’ . Here are steps I take from start to error...
Create SSID’s with no security. CORP not to broadcast. Set CORP to use native VLAN 1000. Set guest to use VLAN1234.
Within security encryption manager > Set encryption mode cipher to AES CCMP on both VLAN 1000 and VLAN1234.
Within services > VLAN check that both VLAN’s have Radio0-802.11N 2.4GHZ and Radio1-802.11N 5GHZ selected. They do.
Within Security > SSID Manager – set client authenticated key management to mandatory, enable WPA – WPAv2. Set pre-shared key. Hit apply > “ERROR: VLAN 1000 doesn’t exist on ‘Radio1-802.11N 5GHZ’ (see Services > VLAN).
I get the same error for both SSID’s. Radio1-802.11N 5GHZ is "checked" against both VLAN's. Am I missing something? Both Radio0-802.11N 2.4GHZ and Radio1-802.11N 5GHZ are enable interfaces and are "up".
I'm pretty customed to switch and router IOS although have absolutely no exposure to WAP CLI.
Any assistance appreciated.I've resolved this myself. The GUI is basically terrible and very buggy. I used the CLI and was able to add WPA through the CLI.
-
"Sales area is not defined" error while creating IBD
Hi All,
We are getting the below error while creating IBD:
Sales area is not defined
No inbound delivery created for the replenishment delivery 0089799561
We are trying to create IBD from OBD.
We have the Z output type ZPED, which is basically same functionality as SPED.
When we trigger the ZPED in OBD, an idoc will be triggered and IBD will be created automatically.
Here in this case, we are getting the error when ZPED is triggered and we are seeing this error from the processing log of that output.
Below is the details of the processing log of failed ZPED:
Object 0089799561
Output type: Stk.Transf.CrteDeliv
Processing log for program /SPE/STO_ID_PROCESSING routine STO_ID_CREATI
Sales area is not defined
No inbound delivery created for the replenishment delivery 0089799561
ZPED is triggered by a batch job in the system but when we are trying to manually trigger it, it got successful.
Please suggest what can be the root cause of it.First of all, please avoid using abbreviated words which is not encouraged here. Second, what is the Business process that warrants you to create inbound delivery against outbound delivery. Whenever you post here and expect assistance from members, please ensure you provide maximum details with regard to business process and what you had configured so that it will be easy for others to understand.
G. Lakshmipathi -
Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.
I am having some trouble trying to get IOS 3.1 on my first generation Ipod touch. I have the latest Itunes, I do not have any dvd burning software like Anydvd that can interfere, and I've tried it on two different computers with no avail. Any help is greatly appreciated.
msoviolist, I opened a ticket via their so called "Express Lane" support page, I assume it'll take a couple of emails before they decide to credit you for the download. I would suggest linking to these two threads in the correspondence, this is what I included in the message;
=========
I've attached a couple of threads from the Apple support
forums, it appears this is an ongoing problem for many folks trying to
download the 3.1 upgrade for the 1st gen. iPod Touch, feel free to
check them out;
1) Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.
https://discussions.apple.com/thread/3373167?start=0&tstart=0#
2) How do I upgrade first generation touch software to 3.1.3
https://discussions.apple.com/thread/3009667?start=0&tstart=0
==========
Good luck...
Message was edited by: SpanishClash -
My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!
Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Error Code 1000 when trying to run Backup Assistant Plus.
I am getting backup failed and Error Code 1000 when trying to run Backup Assistant Plus. Have not been able to backup for several weeks.Droid Razr Maxx.
Hi ellendritz- We are dedicated to make it easier to backup your data! We have integrated Backup Assistant with the Verizon Cloud service offering you many more features and 5GB of storage free! Visit http://www.vzw.com/cloud for more details. The Verizon Cloud app is currently available for download in the Google PlayStore. Please attempt backup with the new application and keep me posted on the status as I would be happy to offer additional support if needed.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport
Maybe you are looking for
-
ABAP - CUA : Initial load : too many records in the CUA?
We are running : SP03 for IDENT. CENTER DESIGNTIME 7.1 Patch 0 SP03 for IDENTITY CENTER RUNTIME 7.1 Patch 1 SP03 for NW IDM IC UIS 7.00 Patch 1 We have connected our customer's CUA system to IdM : we created an Identity Store called 'SAP_Master', cre
-
How to display records of int. table in list tree?
friends, i want to display a list tree using fm RS_TREE_CONSTRUCT and RS_LIST_DISPLAY. this is the data that i have to display Matnr doc no. Stock qty. Age 1 45601236 100 55 1 45601237 10
-
Where to find iPhone software after install lion
Where to find iphone software, after insatll lion on imac. It was easy to find on snow leopard.
-
Create a listing of reports with last run date and # of times run
Hi All, I want to create a listing of reports with last run date and number of times report is run in the past 18 months. If anybody can please help me with the query for the same. Regards, Sk Edited by: user10989244 on Aug 18, 2009 7:12 AM
-
Licensing and Support of BC4J on JBoss
We have an application that uses BC4J (JDeveloper 9.0.4 I believe) that we want to move to JBoss. I have 2 questions: 1. What licence do we need to run this configuration? 2. What support is there for this technology? I realise that this is quuite an