Error deleting MMS messages - "General: Already in...

I have some old MMS text messages which I can not delete from my phone. If I select the message and try to delete, I get the error message "General: Already in Use"  . Does anyone have any idea what is going wrong. Also the message is still in my InBox but I can not open it!  Any suggestions ? Thanks

This problem normally occurs when the phone is running in memory.
- Hold down the blue symbian key and end the application if running
- Make sure nothing is starting or running
- Run File Manager and go into the "mailbox" folder, locate the SIS file and you should be able to delete it
If this fails, try restarting the phone after ending all apps.  Make sure nothing is running when the phone starts back up, then delete from File Manager.
Additional info:
/discussions/board/message?board.id=messaging&thread.id=11274

Similar Messages

  • SOAP:Server, System Error SystemError , code MESSAGE.GENERAL /code

    Hi!!!
    I am testing a webservice and I am getting the following error
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SOAP:Body>
          <SOAP:Fault>
             <faultcode>SOAP:Server</faultcode>
             <faultstring>System Error</faultstring>
             <detail>
                <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                   <context/>
                   <code>MESSAGE.GENERAL</code>
                   <text/>
                </s:SystemError>
             </detail>
          </SOAP:Fault>
       </SOAP:Body>
    </SOAP:Envelope>
    Kindly help me with the same.
    Thanking all of you in anticipation
    Regards,
    Kiran

    Hi Michal,
    Thanks for your prompt response. The above stated error is what I got after accessing it from soapUI.
    I tried to access it from the browser and it gave the following message
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SOAP:Header />
    - <SOAP:Body>
    - <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <faultcode>SOAP:Client</faultcode>
      <faultstring>Empty HTTP request received</faultstring>
      <faultactor>http://sap.com/xi/XI/Message/30</faultactor>
    - <detail>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Empty HTTP query received; message processing not possible</SAP:Stack>
      </SAP:Error>
      </detail>
      </SOAP:Fault>
      </SOAP:Body>
      </SOAP:Envelope>
    Thanks for your help.
    Regards,
    Kiran

  • DI API Error Code - 1, Error Message - General Error while adding order

    Hi All,
        While adding sales order using di api(in .net web application), i receives error(code-1, message-general error) if some particular items are inserted as line items. For all other items, it works fine.
        I put code to export the order to be added as xml if its giving such error. Then I have written one vb code which accepts xml as input and adds order from it. I tried exported xml with this application and it worked, without any change in exported xml order.
        So I thought if general error comes, .net web page should export order xml and import it again and then use add method. But its not working. Though exported xml gets imported and order gets created if I use the other vb code(i run this after some 5 to 10 min, after order is not created from web application).
        Please help me out of this problem.
    Thanks and Regards,
    Yogesh.

    Hi Yogesh,
    I am not sure about the cause for your problem, but I would recommend to:
    a) use SQL Profiler to find out (hopefully) where the transaction actually breaks and
    b) involve SAP Support to find out what doesn't work when you use these particular items.
    HTH,
    Frank

  • How to delete the messages from SXMB_MONI which are already cancelled .

    Hi All,
    The messages were earlier in System error(Red flag) state so i cancelled it manually.
    I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
    if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
    can any tell me the procedure of doing it.
    thanks
    Sai.

    Hi AmitSri,
    Thanks for u r reply,
    What is retention period, where can i find this option.
    And i don't have authorizations to sxmb_adm --> configure delete procedure
                                                                             --> Define interfaces for archiving and retention period.
    and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
    Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
    Thanks
    Sai.
    Edited by: sai_SHA on Aug 17, 2011 12:29 AM

  • I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0.  Apple has no fix. Help???

    I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0.  Apple has no fix. Help???

    Item or object?
    For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot and try installing again.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

    Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

    Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • Why am I getting this message suddenly, when I've done dozens and dozens of projects without trouble at all: The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)

    Why am I suddenly getting this message after I've been using iMovie for a few years now and have never had any such issue before:  The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)

    Two things
    I meant search THIS FORUM
    Error minus49 not same as ERROR 49
    Yours Bengt W

  • After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

    After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

    Hi
    Error -49 opWrErr  File already open with write permission
    Trash the preference files while application is NOT Running.
    from Karsten Schlüter
    Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
    This issue occours only on MacOs machines using 10.7x
    try switching-off the Local Mobile Backup
    in Terminal copy/paste
    sudo tmutil disablelocal
    Re-launch Mac
    Yours Bengt W

  • Error message-----General error (34) Error : out of memory

    Im trying to open a sequence & im getting an error message general error (34) Error out of memory
    wont open sequence
    any ideas

    How much free space do you have on your scratch disk
    What amount of RAM?
    Read this thread:
    http://discussions.apple.com/thread.jspa?messageID=1162802&#1162802

  • Messages fail in PI with error "Message ID already exists in database"

    Hi Guru's,
    The scenario is from FILE->PI->MDM .
    Few messages fail in PI with the error Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database .
    I have already seen the SAP NOTE : 1361305 , My doubt is if this error is any way related to MDM side issue or anything else.
    Please help me out .
    Attached the full trace in PI :
    MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (SAPSR3DB.I_XI_ID_MAP_ID1) violated OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]

    Hi Gowtham,
    Can you check once whether message gets failed after it is automatically restarted.
    Check traces for each defined pipeline.
    I think, at first message got failed due to some reason (i forgot the reason for my case) and when it automatically restart it fails saying message id already exist. Check the root cause why it failed for the first time.
    Also check with basis team on tablespace issue.
    Regards
    Jitender

  • [MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

    Hi...
    I'm a ABAPer.
    I got to create outbound abap proxy for synchronous server proxy and described below.
    My problem is program can not catch the actual error message when occurred error during send data to XI.
    The return message is just 'MESSAGE.GENERAL'.
    But according to the XI part, 'Key error' is actual reason.
    So... how can i take the actual error text like 'Key error'?
    <b>* Only MESSAGE.GENERAL is return message for all kind of errors.</b>
    Thanks.
    Below----
      TRY.
          CREATE OBJECT abap_proxy.
          CALL METHOD abap_proxy->execute_synchronous
            EXPORTING
              output = gs_out
            IMPORTING
              input  = gs_in.
      Exception Handling
    <b>    CATCH cx_ai_system_fault  INTO  go_sys_exception.
          g_sys_result = go_sys_exception->get_text( ).</b>
        CATCH cx_ai_application_fault INTO go_app_exception.
          g_app_result = go_app_exception->get_text( ).
      ENDTRY.
      COMMIT WORK.
    Return status 'D' is succeeded.
      if  gs_in-sales_group_rer_sap-xstat <> 'D'. 
         WRITE:/ 'System Error Message      :', g_sys_result.
         WRITE:/ 'Application Error Message :', g_app_result.
      endif.
    *--Result--
    System Error Message      : MESSAGE.GENERAL
    Application Error Message :
    Message was edited by: Miju cho
    Message was edited by: Miju cho

    Thanks guys, this was useful.
    My scenario is for Asynchronous communication.
    I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
    Have i got this right?
    I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
    The following receivers support acknowledgments:
    ABAP and Java proxies (XI 3.0 SP1 for the latter)
    Integration processes
    IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
    Receiver adapters support system acknowledgments but not application acknowledgments
    My Receiver is JDBC. So I guess I cannot use acknowledgements either.
    Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
    I'll tell you abt what happened earlier.
    My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
    I need to handle such errors...ie. If  the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
    Thanks and Regards,
    Ashwin

  • E52 Message Editor: Already in use (error)

    Hi guys!
    Has anyone else experienced this message editor error in the E52?
    I had this even before the FW update and even with the current FW 022. It still doesnt solve it. Whenever i try to reply to someone, it sometimes gives me a message box with an error message stating: message editor: already in use. I have tried to recreate the scenario but couldn't. i have also tried looking for patterns whenever it occurs but i haven't found one. 
    If anybody experienced this error too, was yours resolved after the FW update? Or is there anything that I can do to resolve it? It's really annoying. I bought this so i can make calls and send messages, other features come in second -- basic features should at least have been perfected.
    To all those who will share their inputs, i will be really grateful. Thanks!
    Message Edited by 31stfreak on 29-Nov-2009 12:58 PM

    hi,
    plz check whether the email application is running in the background. in the E52, i've noticed that until u explicitly exit the application by clicking 'exit', the application is left running in the background. it might be the cause since the email and text message application uses the same message editor.
    hope this helps.
    Az
    Phone Usage History:
    Nokia 3210 -- Nokia 8210 -- Ericsson T28 -- Siemens C35i -- Nokia 8250 -- Nokia 8310 -- Nokia 6100 -- Nokia 6230 -- Nokia 5310 XpressMusic -- Nokia E52

  • ABAP error in deleting archived messages

    Hello all,
    We seem to be having a problem when deleting archived messages.
    The archiving background jobs runs periodically (SAP_BC_XMB_ARCHIVE....).
    The first part works fine ARV_BC_XMB_WRP...., and i can view the list of the message ids that have been archived in files.
    The second bit ARV_BC_XMB_DEL... fails to due a runtime error "NO_DDIC_TYPE":
    check for dictionary type
      rel_name = me->get_relative_name( ).
      if me->is_ddic_type( ) = ABAP_FALSE or rel_name is initial.
        raise no_ddic_type.
      endif.
    Has anyone come across the above error?
    Object BC_XMB has been activated, but i have unable to fill it.
    Any input will much appreciated.
    Thanks,
    Dimitris

    Hi Samanay,
    The fields included in the infostructure are Message Id , Pipeline Id, Message Version, Time Stamp.
    Values for Offset processing is K and for File nema e processing is K.
    Key fields are Message id, pipiline id, message version.
    I apprciate the effort.
    Dimitris

  • Error deleting source system with error message: "incorrect input for....."

    Hi,
    I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
    "incorrect input for activating transported shadow IPacks"
    Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
    Please let me know what is the caused of the error and how to solve the problem.
    Thanks for your kind help.
    Regards,
    Mark

    Hi Mark,
    Which version of BW are you in?
    check this thread and also the note 709581
    Error Deleting Source system connection
    Thanks,
    Raj

Maybe you are looking for