Error deploying Crystal Report XI R2 to Enterprise - Failed to read paramet

Error deploying Crystal Report XI R2 to Enterprise - Failed to read parameter object.
I know this issue has been addressed several times and the solution recommended was to install Service Pack 2. I have done that. It started working for me too; however recently I got some error saying some UDF***.DLL is missing. I re-installed Crystal Reports XI R2 and Service Pack 2. Unfortunately though, this error is back. I have restarted the machine n number of times but keep on getting this error.
My report file has dynamic parameters defined through command object (SQL Query). My understanding is that once I publish the report to BoE Enterprise, BO will create LOVs and BV's in the repository. Now that is not happening.
has any one else had this issue before and resolved it?
Thanks

Hi,
do you export your CR report in your BOBJ repository using an account with administrator rights?
Regards,
Stratos

Similar Messages

Deploying Crystal Reports runtime using merge module failed

Hi,
I am having a problem when deploying Crystal Reports using merge module runtime, included into MS Visual Studio web setup project, when installing my *.msi with CR runtime on a completely clean PC (with only MS Windows installed). Error: Failed to register one of the Crystal Reportsu2019 *.dll because it could not find Microsoft visual C++ runtime (msvcr71.dll was not in Windows\System32 folder)
I am using Crystal Reports runtime merge modules, which I downloaded from here: https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
I tried both cr120_mm.zip (Crystal Reports 2008) and cr121_mm.zip (Crystal Reports 2008 SP1)
cr120 could not find msvcr71.dll, cr121 could not find msvcp80.dll.
Steps to reproduce:
-          In MS Visual Studio 2008 create a new empty Web Setup Project.
-          Add Crystal Reports merge module CRRuntime_12_0.msm or CRRuntime_12_1.msm
-          Build *.msi
-          Try to install this *.msi on a completely clean PC. I tried it on Windows Server 2003 R2 SP3, which did not have msvcr71.dll or msvcp80.dll files in C:\Windows\System32 or in any other PATH folders.
-          During installation there is an error u2013 failed to register one of the Crystal Reportsu2019 *.dll
I am looking forward to hear from you.
Thank you.

I believe these threads have the answer for you:
https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6558989
https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6559113
Ludek

Crystal Report: failed to read parameter object

Hello -
I have a report that consists of numerous static parms and one dynamic parm. I can save the report to my desktop but cannot save it to BO 3.1 CMC Personal Folder (or any folder for that matter).
The dynamic parm does not use a LOV based on Business Views. A table associated with the same data source as the stored proc on which the Report itself is based provides two fields - a code field that is used in the Value and a name field which is used in the Description.
The specific error is:
"Failed to read data from report file <file name> Reason: failed to read parameter object".
All the normal things have been checked -
- VERIFied the database
- Ensured 'No Printer' is checked
- Ran the report (successfully) on the desktop (locally)
The data source is Oracle. The report can be saved to the CMC and run without problem if the dynamic parameter is deleted from the report.
The version of Crystal Reports is CR 2008 vers 12.04
I've seen numerous postings regarding LOVs and Business Views, especially surrounding security issues, but I've yet to see a note about a dynamic parameter based on a table....
Thanks

Hi!
Thanks for the response....
Re: check the "Enable Repository Refresh" checkbox
The SAVE failed with the Failed to read data from report file error.
When I went to the Bus View mgr, I found the LOV. It was set as a cascading prompt (not what I wanted when I set the parm) and could not edit it. No permissions.
I went back to the report and tried to edit the parm into which I had stuffed the LOV I can't touch in Bus Views, and found I can't open in the report canvas without logging into the repository.... which I did.... and went to edit the parm...can't open in the report canvas without logging into the repository.... which I did.... and went to edit the parm... You get the idea....
What I had WANTED to do is take a table with 2 fields in it - a NAME and a CODE field, create a dynamic parm, use the CODE field as the Value and the NAME field as a description. When I brought in the LOV, it came in as a cascading LOV... I needed to have the Description as the user fronted piece... but I can't seem to get there from here.....

Failed to read parameter object when publish crystal report 11

Hi,
I created a dynamic parameter crystal report and while running in CR (XI) everything works fine.
Once I am trying to publish to server (infoview & business objects) I am getting error message "Failed read data from report... Reason: Failed to read parameter object"
(It works fine and was published sucesfully if I change to static parameter.)
I already try to change 'Edit right' in Business View Manager as other people suggest in other place and I still can't publish it without error.
Please help.

Re: Failed to read parameter object using Dynamic Parameter
Posted: Sep 27, 2010 9:23 PM in response to: sharonamt Edit Reply
Hi Sharon,
I am facing same kind of issue with crystal report 12.2.0.290 and BO server 12.1.0 © 2008 Business Objects.
While i am trying publish the report with dynamic parameter, its throwing the error "Failed to read parameter object ".
I am not sure what to do..can you please guide me ?
Where we need to install service pack at machine which having crystal report designer or at Bo server
Regards,
Johnes

Deploying crystal reports 8.5 - error in exporting to RTF & PDF

Hi guys. I'm at my wits end, trying to get a valid build of a legacy app running reports under Crystal 8.5 going.
I've scoured google for days, and I've tried almost everything people have suggested. At the moment I've got the installer working, it installs and registers all the crystal dll's that everyone says are needed. However, when I try and and export a report to RTF or PDF (other options like excel work fine), it simply dies, doing basically nothing. The save to disk dialog just closes and nothing happens. If I rename or delete crxf_rtf.dll, the program will crash or hang, indicating that this is the file responsible for exporting to rtf.
However, the only machine in our office that this will work on is one with a C:\Program Files\Seagate Software\crtslv.dll file.. Same kind of test indicates that on this machine, the above file is being used for exporting. So, where am I going wrong? It seems ludicrously difficult to find a straight, no-nonsense guide on how to deploy crystal reports 8.5; the official documentation doesn't even mention it! What is the easiest way to do this?
I have tried several third-party options ( http://www.fryan0911.com/2008/09/crystal-report-85-runtime-files.html ) like these..
Any ideas?
Ok so here's a further breakdown with some more information; hoping it might help someone to come up with an answer...
If I install a crystal "distributable", like the one linked above, and then install my project (with all crystal stuff turned off in the installer), everything works perfectly apart from exporting reports to rtf.
If I make my own installer, following the Runtime.hlp and the crpe32.dep, and put all dll's in the windows/system32 folder (apart from two, can't remember their names), I get two different errors, depending on the version of crpe32.dll I use.
One gives me "Error 20599: Cannot connect to SQL Server", whenever I try and run a report.
The other gives me "Error 20000: N", whenever I try and run a report.
Anything sound familiar here guys? I have dll dependency headache.
Again, more info - I just checked out the PC's already in deployment (we had to re-do in the installer for some changes, the guys who did it originally aren't around anymore), and here is a list of the dll's installed on the machine.. what deployment method would this point to? And how can I replicate it? I'm not sure if I grabbed all the required DLL's from the client machine, as it didn't seem to follow the Crystal 8.5 deployment instructions, I could have easily have missed some? So I can't just use what I've got to create an installer and hope that it works...
"C:\Windows\Crystal\P2LIFMX.dll"
"C:\Windows\Crystal\p2lora7.dll"
"C:\Windows\Crystal\P2lsql.dll"
"C:\Windows\Crystal\P2lsyb10.dll"
"C:\Windows\Crystal\p2sacl.dll"
"C:\Windows\Crystal\p2sexsr.dll"
"C:\Windows\Crystal\p2sfs.dll"
"C:\Windows\Crystal\p2sifmx.dll"
"C:\Windows\Crystal\p2smapi.dll"
"C:\Windows\Crystal\p2sNote.dll"
"C:\Windows\Crystal\p2sora7.dll"
"C:\Windows\Crystal\p2soutlk.dll"
"C:\Windows\Crystal\p2srepl.dll"
"C:\Windows\Crystal\p2ssql.dll"
"C:\Windows\Crystal\p2ssyb10.dll"
"C:\Windows\Crystal\p2strack.dll"
"C:\Windows\Crystal\p2bbde.dll"
"C:\Windows\Crystal\p2bxbse.dll"
"C:\Windows\Crystal\P2ldb2.dll"
"C:\Windows\System32\crviewer.dll"
"C:\Windows\System32\crxlat32.dll"
"C:\Windows\System32\CRXML15.DLL"
"C:\Windows\System32\CRXML15R.DLL"
"C:\Windows\System32\CRXML15S.DLL"
"C:\Windows\System32\CRxmlx07.dll"
"C:\Windows\System32\CRxmlx07r.dll"
"C:\Windows\System32\crypt32.dll"
"C:\Windows\System32\cryptdlg.dll"
"C:\Windows\System32\cryptdll.dll"
"C:\Windows\System32\cryptext.dll"
"C:\Windows\System32\cryptnet.dll"
"C:\Windows\System32\cryptsvc.dll"
"C:\Windows\System32\cryptui.dll"
"C:\Windows\System32\Crystl32.OCX"
"C:\Windows\System32\cscdll.dll"
"C:\Windows\System32\cpeaut32.dll"
"C:\Windows\System32\craxdrt.dll"
"C:\Windows\System32\Crbas14.dll"
"C:\Windows\System32\CRBAS15.DLL"
"C:\Windows\System32\CRBAS15R.DLL"
"C:\Windows\System32\Crdb214.dll"
"C:\Windows\System32\credssp.dll"
"C:\Windows\System32\credui.dll"
"C:\Windows\System32\Crgup14.dll"
"C:\Windows\System32\CRiadx07.dll"
"C:\Windows\System32\CRiadx07r.dll"
"C:\Windows\System32\Crinf14.dll"
"C:\Windows\System32\Crinf914.dll"
"C:\Windows\System32\Cror714.dll"
"C:\Windows\System32\Cror814.dll"
"C:\Windows\System32\crpaig32.dll"
"C:\Windows\System32\Crpaig80.dll"
"C:\Windows\System32\crpe32.dll"
"C:\Windows\System32\Crsyb14.dll"
"C:\Windows\System32\crtdll.dll"
"C:\Windows\System32\Crutl14.dll"
"C:\Windows\System32\CRUTL15.DLL"
"C:\Windows\System32\CRUTL15R.DLL"

Wow. I've never seen an app load all 3 SDKs in one go. the RDC, Automation Server, OCS and print engine APIs all in one (?!)Who wrote this app?
Don't know - the app was written years ago.. It's all a bit messed up, i'm just the cleaner :S
Once again, I have not a clue as to what SDK you are using.
What Sp1, SP2, SP3? Do you have links to these?
By SP3, I meant Windows XP Service Pack 3, 2, 1 - I've read around the net that Crystal 8.5 exporting breaks when you install sp3, and I thought that perhaps my deployments were failing because they were compiled on a sp3 box?
There is also CR 8.5 Service Pack 3 - apparently it can make CR work on Vista/Win7?
http://resources.businessobjects.com/support/additional_downloads/service_packs/crystal_reports_en.asp
I have tried installing on dev machine, recompiling installer and running on test box - doesn't seem to help..
Do you have any machine where this actually works?
Yep, it's working on the clients machine - that is the one suffixed as "AA" in the linked difference file above
1st place to start is with a working app - is there such a thing? ^^
Next you want to know what SDK you are using.
Ok, so the VB6 app, under Project > References, lists : cpeaut32.dll
under Project > Components, lists: Crystl32.ocx
Is that any help?
Then you want to know what dlls to deploy.
Knowing the database connection type is good. - ODBC
Knowing the version of the db client that works is good. But that depends on having an actual working app.
Do you have CR 8.5 designer and are you able to run and refresh the report there?
Yep, I have 8.5 designer, and I can run and export the report fine.. But when I run MODULES on it, it's referencing C:\Program Files\Seagate Software\Shared\ExportModeller.dll & crtslv.dll.. Which don't exist on the client machine at this point in time..
I'd recommend you stop doing what ever you are doing, answer the questions and wait until I get back. As it is, you're all over the place and by the time I have a chance to reply, you're 1000 miles out in the bushes on your own. So, please answer the questions above and wait...

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

How to Deploy crystal reports in BOE

Hi,
    I have two questions.
    1.How to deploy crystal reports in BOE server.
    2.How many ways is there to deploy crystal reports in BOE server and name of the method is needed.
   Anyone knows about these details could you please reply me
Regards
Babu N

I am not sure what you are asking.
Are you trying to publish reports into Enterprise so they can be run from say infoview, scheduled etc? If so you can either use the publishing wizard or do a save as from the Crystal Reports designer and save them to Enterprise directly.

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

Multi Value Parameter in SP error in Crystal Report SAP B1 ?

Hi Experts ,
i am Getting an error in Crystal Report
"Failed to retrieve data from the database. Details: 42000:[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near '('. [Database vendor code: 120]"
I an executing the SP In Command , I want to pass multi value parameter in SP
When Pressing ok
than On Ok Button Error come
So I have Some Question
1> Why All parameter in Commend Are Automatic getting Compulsory and How to Avoid It?
2> How to Solve this error ? this error is only coming with multivalued parameter ?
i have many report in which i have to send the multi value parameter into query it self so , Plz Help Me
I am New to Crystal Report so it will be Kind Of you if explain with example .
Thankks in Advance !!!
Regards,
Mayank Shah

Hi Shachar,
i will explain one because i think some thing is misunderstood
please the images
when all parameter record selected and no parameter record selected ... i want all record should display
this blank report is problem
Regards,
Mayank Shah

Deploy Crystal Report via ClickOnce without .msi

Hi,
I would like to know whether it's possible to deploy Crystal Report without requiring admin rights from the installer.
My program uses many 3rd party components. Most of them very heavyweight with licensing, COM objects etc but Crystal Report is the only one that needs a .msi install. Is it possible to include Crystal Report's dll with the application? I tried it but Crystal Report failed to load at the form saying there's something wrong with the installation (I didn't "install").

Only way to distribute the CR runtime is via the MSM or MSI files. For links to the msm and msi files see [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
Ludek

Error with crystal report using SAP GUI

Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank you

Hi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree

Deploying crystal reports basic for visual studio 2008 for VB6

My application has a module in .net and other in vb6.
I have a problem on deploying crystal reports in client machines, for module in vb6.
The vb6 application uses crystal viewer control obtained from crystal reports basic for visual studio 2008.
What type of deployment should I use?
Currently, I have a setup with prerequisite "crystal reports basic for visual studio 2008".
But I think it misses the dlls crviewer.dll and craxddrt.dll, so I put them in setup and with the register COM options, and it works, but it's not working very well.
When I open a form that uses crystal viewer, the setup (I have created) is lunched and says that have to restart machine. Then it opens the report, but the next time I use the application it does the same thing.

Ok, thank's for the posts, they help so much.
So I'm going to discard vb6 and move to .NET, but... there is a problem:
Many reports have parameters that are asked before showing the report.
The Crystal Viewer that is used in VB6 version isn't the same used in .NET.
The viewer of VB6 asks the parameters in the way we want, however the .NET crystal viewer ask's the parameters in way that we don't like, because we have to do next -> next -> next...
The links above show the diferences:
VB6 -> http://picasaweb.google.com.br/paulo.gonc/CrystalReports#5249249283702618322
.NET -> http://picasaweb.google.com.br/paulo.gonc/CrystalReports#5249246459437178242
There is a way to configure Crystal Viewer, so that parameters asking form will work like the vb6 away?

Deploy crystal report with add-on package by b1de

Hi
I have some problem with add-on installer. after i package add-on by b1de, I install it on client machine. It works correctly. But when i call report, It have error with crystal report license code and .dll. I found solution that solve that problem. I must include crystal report merge module and License code into windows installer project. But i use b1de to package. How i can include crystal report merge module and License code into b1de project . If anybody have other method to package crystal report into b1de. please help me.
Regards,Seang

for this problem I created window installer which only have merge modules of crystel report & provide it to user to install it as well , bcz sap installer was not including merge modules
, how ever u can try professional installer of SAP DE
but I have not try it,

How to Resolve Join Syntax Errors in Crystal Reports 11.5

Weu2019re upgrading form Crystal Reports Runtime Client 10.0 to 11.5. I have a registry fix that resolves the join syntax errors in Crystal Reports 10.0 by updating the registry key:
[HKEY_LOCAL_MACHINE\Software\Crystal Decisions\10.0\Crystal Reports\Database\QueryBuilder\JoinBuilder]
"SQLServerJoinBuilder"="adbc"
What is the fix for Crystal Runtime 11.5?

Create a new key under:
HKEY_CURRENT_USER\Software\Business Objects\Suite 11.5\Crystal Reports\Database\QueryBuilder\JoinBuilder and add the values
"SQLServerJoinBuilder"="adbc"

Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
Can anyone help?

What is CrystalReportsJava-2013? Where did this come from - download link? CD?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error deploying Crystal Report XI R2 to Enterprise - Failed to read paramet

Similar Messages

Maybe you are looking for