Error deploying .sca files of SRM MDM Catalog 2.0 in SRM system

Hi All,
I'm trying to deploy the SRMMDM20SP02_2_BP_SRM_MDM.sca in SRM system but i'm getting the following error while deploying it.
08/03/04 16:05:22 - Start deploying ...
08/03/04 16:05:22 - EAR file uploaded to server for 16ms.
08/03/04 16:05:22 - ERROR: Not deployed. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Error occurred while deploying ear file ./temp/deploy/work/deploying/srm_mdmcat_bp_webappr.ear.
                     Reason: None of the available containers recognized the components of application sap.com/srmmdmcatbp~webappr; it is not possible to make deploy.
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:570)
                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                          at java.security.AccessController.doPrivileged(Native Method)
                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
                     For detailed information see the log file of the Deploy Service.
08/03/04 16:05:22 - ***********************************************************
Mar 4, 2008 4:05:22 PM   Info: End of log messages of the target system.
Mar 4, 2008 4:05:22 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
I tried deploying using SDM and JSPM. Either way i'm getting the same error. Can anyone tell me what is going wrong and what is the container it is requesting???
Thanks in advance.
Regards,
Seema

Hi Tejas,
Thank You for ur response.
I am deploying on SRM server with WAS 7.0 so I guess that is not the reason. If you can notice in the error it is trying to find some container which it is not able to find. Do you have any hint what this container is??
Also i would like to know what is the content of the SRMMDM20SP02_2_BP_SRM_MDM.sca. Does it gives us a UI like the Configuration UI?? If so can u please send me the link via which i can access it coz i didn't find any such link in the documents.
Thanks and Regards,
Seema.

Similar Messages

How to copy the SRM-MDM Catalog from PRD to QAS system

Dear all,
We do have a SAP SRM-MDM Catalog system.
In the production system, we do have 3 differents repositories.
I want to copy a SRM-MDM Catalog from PRD to QAS system.
Is there a tool to export the catolog from PRD and to import it in QAS system ?
Thanks
SAP NetWeaverAdmin
Edited by: SAP NetWeaverAdmin on Nov 3, 2011 3:10 PM

Archive repository from source system
Unarchive into target system

SRM-MDM Catalog latest version and SRM 6.0

Hi MDM Users,
could anybody tell me when will be released SRM-MDM Catalog 2.0? As I know, latest version is 1.0 Patch03.
Do you have any information about release of SRM 6.0?
Thanks and regards,
Álmos
Message was edited by:
Álmos Paksi

Hi Álmos,
The SRM-MDM Catalog will be releases on July 2nd 2007.
This catalog version will also be part of SRM 6.0.
Best Regards,
Daniela Schweizer
SRM Solution Management

SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

Hi,
We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
We have already configured XI content for MDM Catalog.
We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
Can someone pls help and tell me why is that happening??
Thanks in advance.
Regards,
Jasmeet

Hi Mausam,
yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
We have the Pre delivered content for XI from which we have set up the Interfaces etc.
This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
Regards,
Jasmeet

SRM-MDM Catalog Repository

Hi MDM developpers,
I would like to know if SAP deliver or have a plan to deliver a standard SRM-MDM repository?
Kind regards,
Aklilu

Hi Akilu,
Since the availability of the SRM-MDM Catalog (September 2006) a SRM specific repository is delivered already.
Best Regards,
Daniela

SRM MDM catalog with Negative contract price

Hi SRM / MDM Gurus,
I am facing a problem, when transferring contract data from SRM MDM catalog 3.0 to SRM 7.0 shopping cart process.
Scenario:
We have a u201Cnegativeu201D contract Price in MDM and the same I can able to see in the SRM MDM catalog. When trying to add that contract item to shopping cart the price is always positive. For example the SRM MDM catalog contract price is -100.00, when trying to add that item to shopping cart it is always 100.00.
Is there any configuration or OSS to resolve this issue?
Kindly also let me know is it possible pass negative value to shopping cart?
Kindly let me know your comments.
Thanks.
Regards,
Magesh Basavaraj.

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Error replicating customizing data to the repository (SRM MDM Catalog)

Hi Folks,
I am currently configuring SRM MDM catalog, and one of the initial steps is to replicate data from SRM to the repository.
After defining repositories and FTP servers, I am running step "start extraction".
Well, the result page prompts me for errors in the 3 different files it is trying to replicate:
Report Statistics
Size of document 33.979 Bytes
Number of records :
Currencies 195
cd /
250 CWD command successful.
cd "/SRM_MDM_Catalog/Inbound/SSD_120/LT_Currencies/Ready/"
250 CWD command successful.
Error while executing ftp command put Currencies_554_SSD120.xml
The otehr 2 errors are the of the same type, just of different XML file.
When I look at the log files in the port structure directory, I find the following messages:
<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="MDM_Log.xsl"?>
<MDM_Log version="1.0" path="F:\usr\sap\SCD\MDIS06\exe\MDIS_Temp\MDIS_TASK1_20091223211459.xml"
>
 <Open ts-long="21:14:59 GMT, Wednesday, December 23, 2009" ts="2009/12/23 21:14:59.998 GMT" pid="3304" host="z001idsd118" compile-type="WIN64_RELEASE">
 <Version ts="2009/12/23 21:14:59.998 GMT" tid="9044" entry-no="0"><Server>7.1.01.78</Server><Build>Built on 2009-May-09</Build></Version>
 <Trace ts="2009/12/23 21:15:00.108 GMT" tid="9044" entry-no="1">[MDS=z001idsd118 Repository=SRM_MDM_Catalog ClientSystem=SRM Port=LT_Currencies]: Chunk size/parallel[50000/5]: Import Task Started.</Trace>
 <Trace ts="2009/12/23 21:15:02.092 GMT" tid="9044" entry-no="2">Repository Load [SRM_MDM_Catalog]: 2003.483844 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:02.092 GMT" tid="9044" entry-no="3">Source file(s) retrieval + Repository Load: 2159.024536 milli-seconds.<LF/>-- Currencies_554_SSD120.xml</Trace>
 <Trace ts="2009/12/23 21:15:03.999 GMT" tid="3852" entry-no="4">xStructuralTransformer: Thread started.</Trace>
 <Trace ts="2009/12/23 21:15:03.999 GMT" tid="8392" entry-no="5">xValueTransformer: Thread started.</Trace>
 <Trace ts="2009/12/23 21:15:03.999 GMT" tid="9048" entry-no="6">xImporter: Thread started.</Trace>
 <Trace ts="2009/12/23 21:15:05.092 GMT" tid="6288" entry-no="7">xXmlSaxParser: Thread started.</Trace>
 <Error ts="2009/12/23 21:15:05.202 GMT" tid="6288" entry-no="8">Fatal Error at file Currencies_554_SSD120.xml, line 1, char 1, Message: Invalid document structure RC: 0xfffffffa - Invalid external data</Error>
 <Trace ts="2009/12/23 21:15:05.217 GMT" tid="6288" entry-no="9">xXmlSaxParser: Thread finished; Start -> End: 0.000000000 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="8392" entry-no="10">xValueTransformer: : Start -> End: 0.000000000 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="8392" entry-no="11">xValueTransformer: Thread signalled to stop: RC = 0xffffff</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="9048" entry-no="12">xImporter: : Start -> End: 0.000000000 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="9048" entry-no="13">xImporter: Thread signalled to stop: RC = 0xffffff</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="3852" entry-no="14">xStructuralTransformer: : Start -> End: 0.000000000 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="3852" entry-no="15">xStructuralTransformer: Thread signalled to stop: RC = 0x0</Trace>
 <Trace ts="2009/12/23 21:15:06.108 GMT" tid="9044" entry-no="16">[MDS=z001idsd118 Repository=SRM_MDM_Catalog ClientSystem=SRM Port=LT_Currencies]: Chunk size/parallel[50000/5]: Import Task Finished.</Trace>
 </Open>
</MDM_Log>
What am I missing?
thanks a lot a happy holidays!

Hello Priti,
For accessing the catalog, you have to define the external webservice with the config parameters in SRM System under transaction "SPRO"
Please refer the SRM-MDM Catalog configuration guide.
Hope this will help you.
TNR,
Saurabh...

SRM MDM Catalog (Subscreen Error)

Hi,
I am facing an issue with the SRM MDM catalog.
We are currently implementing SRM-MDM catalog 1.0 SP1 Patch01 HF1.
Our MDM server version is MDM 5.5 SP5 Patch02 HF1.
The steps while creating a Shopping Cart are as follows:
- Log into SRM Shopping Screen.
- Select the SRM MDM Catalog
- Inside the SRM MDM catalog select an item and click on the shopping basket to add the item to the shopping cart.
- Once I click on the shopping basket we are getting the below error
Error when processing your request
What has happened?
The URL http://mb1es1001.idcsap.com:8000/sap/bc/gui/sap/its/bbpsc01/ was not called due to an error.
Note
The following error text was processed in the system SR6 : Subscreen not found
The error occurred on the application server MB1ES1001_SR6_00 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLBBP_SC_UI_ITS
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SR6 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server MB1ES1001_SR6_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server MB1ES1001_SR6_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: RAJ -l: E -s: SR6 -i: MB1ES1001_SR6_00 -w: 1 -d: 20070912 -t: 143649 -v: ABORT_MESSAGE_STATE -e: Subscreen not found
If any have any idea about this error, please help me resolve it. Full points will be awarded.

Hi
Check the SAP Note 967088 and download the configuration guide from SAP official website (SAP Marketplace - OSS Login required). Did you raised any message with SAP as well on this yet. If not, please do the same for faster processing of your query.
Please check what all error logs appear in SLG1 and RZ10 and RZ20 transactions in this case.
Which SRM/CCM/MDM versions, support packs are you using ?
FYI, Catalog names are case sensitive.
OCI parameter should be like this.
0 http://<J2EEhost.domain>:<J2EEport>/SRM-MDM/SRM_MDM
10 username User1
20 password <blank>
30 server <MDM Server>
40 port <Repositiry port>
50 catalog <Repository name>
60 uilanguage SY-LANGU
70 datalanguage SY-LANGU
80 mask <blank>
90 named search <blank>
User name and password mainatined in MDM console is case sensitive.I would suggest you to follow this step
1.In MDM Console for User1 enter password as user1(note that password is all small case)
2.Ensure that you enter the password in similar manner in defining OCI.
Please try the following OSS Notes & links below ->
OSS Note 895183
947362
938495
Note 871302 - Unable to switch between catalogs using F4 help
Note 890967 - /CCM/CHECK_TREX shows incorrect document content
Note 946185 - CCM20: /CCM/CHECK_TREX modifications
Note 707781 - Product search does not find all documents
Note 481295 - Short dump RAISE_EXCEPTION when expanding a product node
Note 723688 BBP TREX corrections for SRM 4.0 SP01
Note 778688 TREX_INDEX_MANAGER unit test update_view(): incorrect search
Note 930788 - Search help for catalog does not display all catalogs
Note 1028343 Changes in the repository not reflected in Catalog UI
Note 1015201 - SRM-MDM Catalog 1.0 Patch02 Release Note
Note 487917 BADI implementation f. BBP_CATALOG_CONTENT (Troubleshooting)
Note 877131 Product category is not permitted for the user
Note 623067 SRM 2.0 Integrated Catalog does not display catalog info
Re: ITS Template not found
SRM MDM Catalog --Login error
Do let me know.
Regards
- Atul

Is use of flat file in SRM-MDM catalog search UI possible ?

Hello,
When user looks for materials inside SRM-MDM catalog (using search user interface), search is done manually with free form or drill down search.
Then, among the search result, user has to select items he wants to add to his shopping cart and finally transfer those items from his shopping cart overview inside SRM.
Is it possible to automate this user selection using for exemple a flat file uploading (or any other way you could know) ?
This flat file will have material number (or service), supplier code and quantity (no more information).
The aim of the request is to help requester to not have to select each item one by one (in the search result) knowing that :
- SC will have more than a hundred items,
- delivery time and price (for example) must be checked in MDM, being the master data reference
- materials (or service) to order are received by requester via a flat file without any information about prices, so i cannot upload my flat file directly into SRM because file missing data must come from MDM.
With this process, user should have only to transfer items automatically selected.
Could you please share your advises ?
We use SAP MDM 5.5.
Regards.
Laurent.

Hello Masa,
Masayuki Sekihara wrote:
A vendor look at buyer stock information like VMI and fill stock weekly base. So the vendor sends material number and quantity information as flat file to buyer. Buyer should create SC from flat file and price information should fetch from catalog.
Yes, your are correct: example you gave corresponds to process for my SC uploading.
Regards.
Laurent.

ECC TO SRM-MDM CATALOG THROUGH SAP PI

We have a scenario where we are sending data from ECC to SRM-MDM Catalog through SAP PI and data is coming from ECC through proxy and sending to SRM u2013MDM catlog through file adapter. In ESR part we have used SAP defined standard service interfaces (CatalogueUpdateNotification as sender interface and MDMInfoRecordDataTransmission as a receiver interface). The mapping used is also standard one.
Now we have got requirement to send the data for vendor mat no, manufacturer field of info records from ECC to SRM-MDM catlog. But we are unable to find out these two fields in standard interfaces/messages. Can anybody guide us how to add these fields in the current data types or is there any other standard interfaces we can use.
Thanks in advance.

Hi Shiv,
Many thanks for your reply.
Since we're not using XI / PI scenario and this is an upgrade from SRM 5.5 to SRM 7, Iu2019m using the same approach that was already used in SRM 5.5 with CCM 2.0.
The idea is that the catalogue and all the records maintained need to be associated to a contract. So, I add the contract ID and the correspondent contract item in the import file, in addition to the supplier name, product ID, price information and so on. I mapped the contract ID with the field contract price.
In relation to the price information fields, as I want it to be visible for any user that accesses the product catalogue, I tried different approaches:
1.Using OCI Price information u2013 amount, currency, price base quantity and price base quantity UoM;
2.Using OCI Price contract u2013 amount, currency, price base quantity and price base quantity UoM;
The first approach didnu2019t work very well, as I was not able to see price information when accessing the catalogue. I could only see it once I transfer the items to the SC. In addition, this approach had one problem. The products were displayed but it was not possible to select the items one by one. To do that I needed to select all the items of the catalogue and after that the detail of the contract ID was displayed in every item, allowing me to choose the items that I want to select to my SC.
The second approach was better as the information was visible when accessing the SC and I was able to select all the items, one by one, as it should be. The main problem of this approach was that Iu2019m getting errors in the SC when the materials have stock u2013 u201CInterface data contains errorsu201D. Or alternatively, if the items didnu2019t have stock, the SC was possible, but when I tried to create a PO from that SC, It simply does not work.
So, can someone help me? Any ideas?
Thanks in advance.
Best regards,
Andreia

SRM-MDM catalog 3.0 - Installation Process

Hi All,
I'm in the process of installing SRM-MDM catalog 3.0 but I'm not sure about the correct installation process.
The SRM-MDM catalog 3.0 installation guide indicates that the following instances are mandatory for SRM-MDM Catalog system:
1- Java system with the central instance, the central services instance, the database instance
2- MDM Server, and MDM Import Server
We have covered the first point by installing an SRM 7.0 JAVA system. Regarding the second requirement, I have some doubts in the way it should be completed. What we did so far was to install the SRM-MDM catalog 3.0 from the MDM 7.1 installation master. So, we now have two MDM server instances: MDS and MDIS.
I'm stuck now. I'm not sure on how to connect my SR-MDM system to the JAVA DB (created in step 1) to create a new MDM schema within it. This makes me wonder if I've followed the correct process. Could you please clarify and explain which steps should be performed to get my SRM-MDM system up and running? Actually my main concern is..Should I first install a MDM system as it's described in MDM IG, and after that perform the installation of the SRM-MDM catalog as I've already done in step 2?
Hope being clear enough I'll wait for your suggestions.
Thanks and regards

Hi Diego.
The Installation Note Number for SRM-MDM Catalog 3.0 is : 1177779. The recommended steps would be to follow how the Installation Guide recommends you to do so.
But still your assumption is correct. MDM landscapes and Java landscapes are both different set of categories to be installed to make the Catalog scenario to be successfull.
Step 1: Make sure you have the back end database server(SQL/Oracle/???) is installed.
Step 2: Make sure all the MDM components(MDS, MDIS, etc) is installed.
Step 3: Make sure Java WebAS is installed correctly.
Step 4: Now deploy the Catalog SCA and MDM Connector deployed in the Java WebAS.
Step 5: You can unarchive and load the repository.
Step 6: Try to launch the catalog using the URL provided to check and make sure if the connection is fine.
Also what Masa has mentioned is the communication path how the whole process is achieved technically and that doesn't mean that it has to be in the same order which he has mentioned. The below sequence is just an path to describe how the communication is achieved technically.
User -> Browser(Search UI deployed on AS Java) -> (Java API on AS Java) -> MDM Server -> MDM Repository -> DB
Relating Masa's path with the above steps
User ->
Browser(Search UI deployed on AS Java) -> Step 3 and 4
(Java API on AS Java) -> Step 3 and 4
MDM Server -> Step 2
MDM Repository -> Step5
DB-> Step 1
Hope this helps.
Regards
Bala
Edited by: chandar_sap on Aug 30, 2010 6:16 PM

Making changes in SRM MDM Catalog page

Hi All,
I am working on SRM MDM Catalog 2.0. I need to make some changes in shopping cart create screen. My changes include
Renaming the label, deleting the tabs, changing the look and feel of the catalog page etc.,
Can any one guide me whether Is it possible to do any settings in the UI for any of these issues ?If not how can i go about it to make these chanegs in the shopping cart page? Or is there any other way to make these changes..
Can anyone please guide me on this...
Thanks & Regards
Sireesha.

Hello Sreesha,
You can configure the look n feel of your Catalog Screen.
The SRM-MDM catalog business content, there are some scar files which you have deployed on the server.With the help of that scar file, you can access the search UI Catalog Screen from the link as mentioned below:
Http://servername:port/SRM-MDM/SRM_MDM
Just coneect with your MDM server by server name and password then select your repository.In the standard repository of SRM-MDM, there is alreardy a user as "Master" having role as "UI Configuratation Manager"
Just login with user as "Master" and pwd as blank.
then you can find the UI screen, there are so many functionality to configure your catalog screen.
Hope this will help you.
TNR,
Saurabh...
Edited by: Saurabh Kumar Sahu on May 23, 2008 3:12 PM

Scenario - ( EC6 - XI - SRM-MDM Catalog )

Hi,
I am working on Scenario"Transfer Info records and contracts from ERP, Auto Import of contract and info Records from ERP".
Scenario:

Sender Side:
=>Run Tcode: MECCM in ERP system and send Purchasing info records to Catalog system via XI.
Recvr Side:
=>Same will be received as XML file in a file location(FTP Server running on SRM MDM catalog system).

XI Side:
=>I have uploaded XI Content in repository and same has been transported to Integration Directory also.
=>Using Intergation scenario configurator i have done all configurations in Integration Directory also.
=>I have configured XPATH in condition field for interface determination as dicussed in SAP OSS Note 967088 to be used for ths scenario.
=>Now when i am running the tcode from sender side message is getting stuck in SXMB_MONI with error: No receiver Determined.
I can understand there is some problem in Receiver Determination. When i tried to check all settings, only thing i found fishy was There was no Interface mapping being displayed in Interface determination but condition field is filled as discussed in SAP note 967088.
I doubt there is some problem in interface determination only.
Expert comments are required. I can send you screenshots if required.
Any help is appriciated.
Thanks,
Vijay Raheja

Here is the XML Payload
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:CatalogueUpdateNotification xmlns:nr1="http://sap.com/xi/SAPGlobal/Global">
- <MessageHeader>
<ID />
<CreationDateTime />
</MessageHeader>
- <Catalogue actionCode="04">
<CompleteTransmissionIndicator>TRUE</CompleteTransmissionIndicator>
<ID>SRM-MDM CATALOG</ID>
<TypeCode>04</TypeCode>
- <Model>
- <PropertyDataType actionCode="04">
<ID schemeAgencyID="">PURCHORG_TYPE</ID>
<FormatCode>String</FormatCode>
</PropertyDataType>
- <PropertyDataType actionCode="04">
<ID schemeAgencyID="">PURCHINF_TYPE</ID>
<FormatCode>String</FormatCode>
</PropertyDataType>
- <Property actionCode="04">
<ID schemeAgencyID="">PURCHORG</ID>
<PreferredName languageCode="EN">Purchasing Organization</PreferredName>
- <PropertyDataTypeReference>
<ID schemeAgencyID="">PURCHORG_TYPE</ID>
</PropertyDataTypeReference>
<AspectID>LIST_VIEW</AspectID>
<AspectID>DETAIL_VIEW</AspectID>
<TargetInterfaceElementID schemeID="01">NEW_ITEM-PURCHORG</TargetInterfaceElementID>
<MultipleValueIndicator>false</MultipleValueIndicator>
<TextSearchableIndicator>false</TextSearchableIndicator>
<ParametricSearchableIndicator>false</ParametricSearchableIndicator>
<ValuationRequiredIndicator>false</ValuationRequiredIndicator>
</Property>
- <Property actionCode="04">
<ID schemeAgencyID="">INFREC</ID>
<PreferredName languageCode="EN">Number of Purchasing Info Record</PreferredName>
- <PropertyDataTypeReference>
<ID schemeAgencyID="">PURCHINF_TYPE</ID>
</PropertyDataTypeReference>
<AspectID>LIST_VIEW</AspectID>
<AspectID>DETAIL_VIEW</AspectID>
<TargetInterfaceElementID schemeID="01">NEW_ITEM-PURCHINFREC</TargetInterfaceElementID>
<MultipleValueIndicator>false</MultipleValueIndicator>
<TextSearchableIndicator>false</TextSearchableIndicator>
<ParametricSearchableIndicator>false</ParametricSearchableIndicator>
<ValuationRequiredIndicator>false</ValuationRequiredIndicator>
</Property>
- <CatalogueSchema actionCode="04">
<ID>MMPUR_CAT</ID>
<CatalogueSectionListCompleteTransmissionIndicator>true</CatalogueSectionListCompleteTransmissionIndicator>
- <CatalogueItemProperty>
- <PropertyReference>
<ID schemeAgencyID="">PURCHORG</ID>
</PropertyReference>
<OrdinalNumberValue>1</OrdinalNumberValue>
</CatalogueItemProperty>
- <CatalogueItemProperty>
- <PropertyReference>
<ID schemeAgencyID="">INFREC</ID>
</PropertyReference>
<OrdinalNumberValue>2</OrdinalNumberValue>
</CatalogueItemProperty>
- <CatalogueSection actionCode="04">
<ID>001</ID>
<Name languageCode="EN">metal processing</Name>
</CatalogueSection>
</CatalogueSchema>
</Model>
- <Content>
<CatalogueSchemaID>MMPUR_CAT</CatalogueSchemaID>
- <CatalogueItem actionCode="04">
<PropertyValuationListCompleteTransmissionIndicator>true</PropertyValuationListCompleteTransmissionIndicator>
<ID>5300000000__________00000RBB1____0______</ID>
<Description languageCode="EN">srm material 1</Description>
- <Classification>
<CatalogueSchemaID>MMPUR_CAT</CatalogueSchemaID>
<CatalogueSectionID>001</CatalogueSectionID>
</Classification>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRICE</ID>
</PropertyReference>
- <ValueGroup>
<ID>1</ID>
<OrdinalNumberValue>1</OrdinalNumberValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/AMOUNT</ID>
</PropertyReference>
- <ValueGroup>
<ParentID>1</ParentID>
- <PropertyValue>
- <AmountSpecification>
<Amount currencyCode="EUR">0.0</Amount>
</AmountSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRICE_BASIS_QUANTITY</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <QuantitySpecification>
<Quantity unitCode="EA">2.0</Quantity>
</QuantitySpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/CONTRACT_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
<NameSpecification />
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/CONTRACT_ITEM_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>00000</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/LEAD_TIME</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>0</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/ORDER_UNIT</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>EA</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRODUCT_GROUP</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>001</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRODUCT_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>000000000000000011</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/SUPPLIER_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>RBDE1</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">PURCHORG</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>RBB1</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">INFREC</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>5300000000</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
</CatalogueItem>
- <CatalogueItem actionCode="04">
<PropertyValuationListCompleteTransmissionIndicator>true</PropertyValuationListCompleteTransmissionIndicator>
<ID>5300000000__________00000RBB1RBBE0______</ID>
<Description languageCode="EN">srm material 1</Description>
- <Classification>
<CatalogueSchemaID>MMPUR_CAT</CatalogueSchemaID>
<CatalogueSectionID>001</CatalogueSectionID>
</Classification>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRICE</ID>
</PropertyReference>
- <ValueGroup>
<ID>1</ID>
<OrdinalNumberValue>1</OrdinalNumberValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/AMOUNT</ID>
</PropertyReference>
- <ValueGroup>
<ParentID>1</ParentID>
- <PropertyValue>
- <AmountSpecification>
<Amount currencyCode="EUR">200.0</Amount>
</AmountSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRICE_BASIS_QUANTITY</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <QuantitySpecification>
<Quantity unitCode="EA">2.0</Quantity>
</QuantitySpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/CONTRACT_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
<NameSpecification />
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/CONTRACT_ITEM_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>00000</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/LEAD_TIME</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>5</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/ORDER_UNIT</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>EA</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRODUCT_GROUP</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>001</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/PRODUCT_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>000000000000000011</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">/CCM/SUPPLIER_ID</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>RBDE1</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">PURCHORG</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>RBB1</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
- <PropertyValuation actionCode="04">
- <PropertyReference>
<ID schemeAgencyID="">INFREC</ID>
</PropertyReference>
- <ValueGroup>
- <PropertyValue>
- <NameSpecification>
<Name>5300000000</Name>
</NameSpecification>
</PropertyValue>
</ValueGroup>
</PropertyValuation>
</CatalogueItem>
</Content>
</Catalogue>
</nr1:CatalogueUpdateNotification>
Thanks,
Vijay Raheja

SRM -MDM Catalog Implementation

Hi All,
I am currently working on SRM-MDM catalog implementation and would like to clear a few queries regarding the same:
1. What are the different possible ways to transfer data from SRM to MDM?
2. In the configuration guide it is mentioned that if you want to send Contract, InfoRecords, Product Data then we have to use XI. Communication between SRM and XI will be using XI protocol. It means we have to create outbound proxy for triggering data from SRM to XI.
Is this correct please confirm. If yes do we have a standard proxy report to do the same.
3. In the Functional Documentation Guide for SRM-MDM catalog it is mentioned that to send contract data from SRM use transaction SRMMDM_CTR_TRANSFER. but though it shows the contract data, it is not able to send data to XI. Is some setting required for sending data to XI?
4. In Functional Documentation Guide for SRM-MDM catalog it is mentioned that to upload Supplier Data from SRM system to SRM MDM Catalog repository use Report ROS_SUPPLIER_SEND_TO_CATALOG. But while executing this report I m getting exception "Function module "BUPA_MWX_BDOC_BPS_FILL_CENTRAL" not found.".
How do I solve this?
Thanks in Advance
Shiv
Note: Points will be awarded to helpful answers.

Hi Shiv,
you can use the import Manger of MDM to upload XML, CSV XSL data files
The connection from SRM to SRM-MDM is done via OCI 4.0.
If you want to replicate data from your backend R/3 system you have to use XI.
2. Please Refer to the installation guide of SRM-MDM there the connection between Backends and XI is expalained in detail.
3-4 . Have you depoyed every file of the istallation there is also a part to be deployed in SRM?
Best regads Alex

SRM-MDM Catalog Installation/Landscape

Hi,
We are currently having the following landscape in place with regards to the SRM, MDM and SRM-MDM Catalog :
Server 1 : SRM 5.0 Running   (HP-UX)
Server 2:   Enterprise Portal running with MDM Content and SRM-MDM Catalog JAVA components (HP-UX)
Server 3:   Standard MDM Server installation (Windows 2K)
We have configured everything according to the notes and guides (including the guide from Sudhendu Pandey), but when we try to configure the Search UI in Webdynrpo, the java components cannot connect to the MDM host and we are getting just the connection failed error.
My questions are :
1)   Can we run with the above landscape or is it necessary to have the SRM-MDM Catalog Java components installed on the same server as MDM.
2)   Do we have problems with versioning of the MDM server and the SRM-MDM java components ? We already replaced the MDM_JAVA_API with the correct one, but I do not have a newer version of the other api.
3)   Do I need to configure anything on the MDM server to get this running ?
Thanks in advance for your help
Regards
Raymond

Hi Foh,
Apologies for my late reply, but I was travelling. Thanks for this tip. We were using the latest versions for the MDM Portal Content, but the API for the SRM-MDM catalog was different.
I have updated this API with the latest version (Patch 3 HF 1) and now I can logon to the MDM server and I see the MDM Repositories. However if I now try to logon to one of the repositories he gives me the same error that the Login has Failed. The user that I am using is the default one coming with the SRM-MDM repository (Admin).
Regards
Raymond

Error deploying .sca files of SRM MDM Catalog 2.0 in SRM system

Similar Messages

Maybe you are looking for