Error detected during paging operation

My computer is freezing on a regular basis and I get the repeated Event ID: 51 message 'An error was detected on device \Device\Harddisk0\D during a paging operation.' in the system log.
The hard drive is a new Maxtor DiamondMax 10 SATA.
I've been to the Maxtor site and it says 'These errors are not caused by the external storage device. The error may be related to problems in either the USB / ATA / SCSI / 1394 controller sub system or another storage device.'
Does this mean there is a fault with the motherboard?
The motherboard is an K8T Neo2 Series (MS-6702E).

Quote from: mcihael on 13-June-05, 03:50:14
Hi,
it may help if you'd disable USB legacy supprt in BIOS. I have had similar issues with my Firewire-HDD. The BIOS setting mentioned before fixed that apparently.
Michael
Thanks I will give that a try.
I'm still getting the same problem.
I have upgraded the PSU to a 450W and changed the memory configuration from dual-channel (using DIMM1 & DIMM3) to the ordinary configuration (using DIMM1 & DIMM2).
Neither of these measures has worked.
I am using two Crucial CT6464Z40B 512MB PC3200 memory modules that according to Crucial should be 100% compatible with the board.

Similar Messages

An error occurred during the operation (endpoint id 842). (ALC-WKS-007-027)

In the log file I get this:
2 errors with the message: "No scheduler found with name IDPSchedulerService";
the stack dump says this:
"tack Dump = com.adobe.idp.event.exception.EventCreateException: Event for event-type TaskCreated cannot be created in the database. Reason:com.adobe.idp.event.policy.EventPolicyException: No scheduler found with name IDPSchedulerService
at com.adobe.idp.event.manager.EventManagerImpl.createEvent(EventManagerImpl.java:499)
at com.adobe.idp.event.manager.EventManagerImpl.publishAsynchronousEvent(EventManagerImpl.ja va:636)
at com.adobe.idp.event.manager.EventManagerImpl.createEvent(EventManagerImpl.java:357)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorI"
After the 2 above erros I get:
EJB threw an unexpected (non-declared) exception during invocation of method "doRequiresNew" on bean "BeanId(LiveCycle8#adobe-dscf.jar#EjbTransactionCMTAdapter, null)". Exception data: com.adobe.idp.event.exception.EventCreateException: Event for event-type TaskCreated cannot be created in the database. Reason:com.adobe.idp.event.policy.EventPolicyException: No scheduler found with name IDPSchedulerService
and this:
0000005b ExceptionUtil E CNTR0020E: EJB threw an unexpected (non-declared) exception during invocation of method "doSupports" on bean "BeanId(LiveCycle8#adobe-dscf.jar#EjbTransactionCMTAdapter, null)". Exception data: com.adobe.idp.event.exception.EventCreateException: Event for event-type TaskCreated cannot be created in the database. Reason:com.adobe.idp.event.policy.EventPolicyException: No scheduler found with name IDPSchedulerService
finally this:
SystemOut O [LCDS] [ERROR] Exception when invoking service 'remoting-service': flex.messaging.MessageException: ALC-WKS-005-055: An error occurred while retrieving endpoints based on a collection of endpoit ids.
incomingMessage: Flex Message (flex.messaging.messages.RemotingMessage)
operation = invoke
clientId = F7149C09-0009-5D6D-9BC1-6E4D6695EECD
destination = endpoint-actions
messageId = FCC3F5ED-6BBF-5973-327A-4BCF1E12CBDF
timestamp = 1229632510208
timeToLive = 0
body = null
hdr(DSId) = F708081D-AF1A-E1AC-E3A6-3D38677596EC
hdr(DSEndpoint) = workspace-polling-amf
In workspace I get this:
An error occurred during the operation (endpoint id 842). (ALC-WKS-007-027)
thank you

Hi Neptus,
Have you ever gotten response to your question? I am getting the exact same error on my server (WebSphere/AIX/Oracle10g) and I am not sure what is causing it. When I look at the list of running services "IDPSchedulerService" is one of them. I am not sure what is going on.
Thanks,
Ilija

ODI-23049: Error Detected during Repository Installation

Hi All
I installed ODI 11.1.1.6.0 on W7(x64).
http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
(for all platforms)
I created user odim
on Oracle server : Personal Oracle 11g (11.2.0.1.0)
(where I have ALL rights)
grant DBA to ODIM with admin option;
Trying to create Master repository from ODI Studio got :
ODI-23049: Error Detected during Repository Installation
:Error while updating Schema Version Registry Entry for ODI.
Check if user odi has DBA permissions.
Test connection on 1-st page
jdbc:oracle:thin:@EVBYMINSD0799:1521:TRAF
works OK.
Any ideas welcome

DBA User: The database administrator's username
DBA Password: This user's password
I use user ODIM (ODI) for both user and DBA
( tried SYS - but it fails with standart message : you should connect as SYSDBA - because there is no uch option in interface )
I use user ODIM 2 times
Is it correct ?

"Burning finished. Errors detected during burning".

I have been trying to burn in iDVD 5 without luck. I keep getting the message in the subject line "Burning finished ..." after it has encoded all the media.
the project seems to encode/compress the data, but then not physically burn the media.
It was working fine until iDVD crashed on me one time -- since then, I have not been able to successfully burn.
Any ideas? Many thanks in advance. I am using all the latest software.
Long live the sunflower iMac G4, iBook G4 Mac OS X (10.4)

sometimes idvd errors occur because of a corrupted file. I had everything go smooth...video encoded good but then it froze up after trying to encode the audio...I went back into my project and deleted the "added" music [ wedding video] and tried music that I knew worked before....voila! It was corrupted music file[s]...I found that sometimes my clients will give me a CD with their music on it it and it will not work in idvd even though it worked fine in imovie!

32 errors detected during ACT_700. in SRM Upgrade

Hi Experts
 I am stuck in SRM Upgrade. I have got follwing error. They might be known for you. Please suggest me the solution. Your response will be highly appreciated.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7009.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7008.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7007.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI5.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI3.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7C.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7B.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7A.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT10.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT09.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT08.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT07.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAD70024.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC701.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1EEDO519X"Data Element" "Z_STORT" could not be activated*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70013.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI4.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621482 at 20080110153041*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
*A tool used by tp produced errors*
*Process with ID 2621482 terminated with status 8*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621520 at 20080110154527*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
*A tool used by tp produced errors*
*Process with ID 2621520 terminated with status 8*
*iedm3330dd:ed2adm>*
*iedm3330dd:ed2adm>*
Thakns& Regards
Jignesh

Hi Experts
 I am stuck in SRM Upgrade. I have got follwing error. They might be known for you. Please suggest me the solution. Your response will be highly appreciated.
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7009.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7008.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPANA7007.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI5.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI3.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7C.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7B.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIPYJ7A.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT10.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT09.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT08.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAIBKT07.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAD70024.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCG700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC702.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC701.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCC700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAB70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAA70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70011.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAAAA700.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1EEDO519X"Data Element" "Z_STORT" could not be activated*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70013.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70012.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAW70010.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*DDIC ACTIVATION ERRORS and RETURN CODE in SAPAITLQI4.ED2*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
*1 ETP111 exit code : "8"*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621482 at 20080110153041*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
*A tool used by tp produced errors*
*Process with ID 2621482 terminated with status 8*
Phase ACT_700:**
*BLOCKED SIGNALS: ''*
*SAPup> Starting subprocess 2621520 at 20080110154527*
*ENV <0x2ff22b44>: ORACLE_PSRV=ED2*
*ENV <0x2ff22c03>: NLS_LANG=AMERICAN_AMERICA.WE8DEC*
*ENV <0x2ff22c24>: ORACLE_BASE=/oracle*
*ENV <0x2ff22c74>: dbs_ora_tnsname=ED2*
*ENV <0x2ff22c88>: ORACLE_SID=ED2*
*ENV <0x20153bf8>: DIR_LIBRARY=/usr/sap/put/exe*
*ENV <0x20128b20>: dbs_ora_schema=SAPED2*
*ENV <0x2ff22d6c>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data*
*ENV <0x2ff22e33>: ORACLE_HOME=/oracle/ED2/102_64*
*ENV <0x2ff22e7e>: dbms_type=ORA*
*ENV <0x20154edc>: LIBPATH=/usr/sap/put/exe:/usr/lib:/lib:/usr/sap/ED2/SYS/exe/ru*
*n*
*ENV <0x20128720>: auth_shadow_upgrade=1*
*EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/ACTUPG.TPP put ED2*
*This is /usr/sap/put/exe/tp version 372.03.35 (release 700)*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter INTERRUPT is no longer used.*
*Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.*
*Warning: Parameter WITH_TACOB is no longer used.*
*Warning: Parameter IMPDP_BY_EVENT is no longer used.*
*Warning: Parameter DBCONFPATH is no longer used.*
*Looking for effective putsteps ... ... ready (looking for putsteps)*
*tp finished with return code: 8*
*meaning:*
*A tool used by tp produced errors*
*Process with ID 2621520 terminated with status 8*
*iedm3330dd:ed2adm>*
*iedm3330dd:ed2adm>*
Thakns& Regards
Jignesh

Error Detected during Installtion

Hi ,
I have to create Master Repository using Oracle 11g database.
I have entered all the DATABASE CONNECTION details and Test the connection like :
Message was edited by: 952939

Duplicate of post
https://forums.oracle.com/thread/2548493

Backup Failure - Unrecoverable error occurred during Flush

Hi
I get the following error when doing a backup to Azure from sql2014.
12 percent processed.
25 percent processed.
31 percent processed.
44 percent processed.
50 percent processed.
63 percent processed.
70 percent processed.
82 percent processed.
95 percent processed.
Processed 2008 pages for database 'testdb', file 'testdb' on file 1.
100 percent processed.
Processed 2 pages for database 'testdb', file 'testdb5_log' on file 1.
Msg 3271, Level 16, State 1, Line 3
A nonrecoverable I/O error occurred on file "https://ccom.blob.core.windows.net/mccdl-mssqlserver/testdb.bak:" Backup to URL received an exception from the remote endpoint. Exception Message: Unrecoverable error occurred during Flush operation.
Msg 3013, Level 16, State 1, Line 3
BACKUP DATABASE is terminating abnormally.
the database is 5mb

Hi,
It seems like this issue is more related to Azure backup, I will move this thread to Azure backup Forum for a better help.
Thank you for your understanding.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

'An error was detected on device \Device\Harddisk0\D during a paging operation.'

Hi,
since a while (as far as i am able to roll back system log in event viewer) I am having strange issues in the sys log, as in the subject. It is a warning of disk event 51: 'An error was detected on device \Device\Harddisk0\D during a paging operation.'
I have freed up 1/3 of each partition on the harddrive. Any idea where can i keep going to investigate?
thx

pogacsa,
I have searched a bit about you issue in microsoft technet,and here's what they have got to say
"An event ID 51 entry is a generic error entry for any type of error that occurs when Windows is paging information to input/output (I/O).
A paging operation occurs when Windows either swaps a page of memory from memory to disk, or when Windows retrieves a page of memory from disk to memory."
In this event, D, DR and FT, they all stand for a certain disk partition number. You can use the Registry or Disk Management to locate the certain disk.
For further information, please refer to the following KBs:
159865 How to distinguish a physical disk device from an event message
http://support.microsoft.com/kb/159865/en-us
244780 Information about Event ID 51
http://support.microsoft.com/kb/244780/en-us
you may also want to check out this link from microsoft technet community as well.
some of the resolutions mentioned there require you to modify your registry.Please DONOT attempt to modify the registry if you dont have enough prior knowledge about it
Also try defragmenting your HDD once.
hope this info helps you
Message Edited by vijaysaradhi on 06-03-2009 02:33 PM
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

An error was detected on device \Device\Harddisk0 during a paging operation.

Hi
I have a Dell PE 2850 running Windows Server 2003 which is attached via SCSI to a Power Vault 220 SCSI disk enclosure.
The server is beeping and in the eventvwr I see the following message:
An error was detected on device \Device\Harddisk0 during a paging operation.
There are no disk failure lights on the server so what is causing these errors in the Event Viewer?
Thanks
Paul

The "error" doesn't have to mean that the disk is faulty, it's just that that specific write operation might have failed (for unknown reasons).
That's all the light I can shed on it after looking through my event logs, I have a few of those too, but no errors anywhere else.Best regards
Joachim Nässlander
IT-Expert, Knowledge Factory
(http://www.knowledgefactory.se)
MVP Cluster
Member of Microsoft Extended Experts Team (MEET)
Blog: http://www.nullsession.com

An error was detected on device \Device\Harddisk3\DR3 during a paging operation. - The driver detected a controller error on \Device\Harddisk3\DR7

How can i ensure that the harddisk3 designation is relatd with USB etxernal disk?
I have several erros in LOGs:
An error was detected on device \Device\Harddisk3\DR3 during a paging operation.
and
The driver detected a controller error on \Device\Harddisk3\DR7
All times are HardDisk3 and sometimes it references to DR3 and sometimes DR7
My disk structure is:
2 RAID5 arrays fomr the same disks (80GB and 2 TB)
and USB 2 TB External hard disk with several partitions
I´m 99% sure that the error is related to the external USB disk and the Dell DIag tool shows no problems with any component
DISKPART> list disk
Disk ### Status         Size     Free     Dyn Gpt
Disk 0    Online           80 GB      0 B
Disk 1    Online         2711 GB      0 B        *
Disk 2    Online         1862 GB 1024 KB
DISKPART> sele disk 0
Disk 0 is now the selected disk.
DISKPART> detail disk
DELL PERC H700 SCSI Disk Device
Disk ID: 6EFE3928
Type   : RAID
Status : Online
Path   : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0400)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 3         System Rese NTFS   Partition    100 MB Healthy    System
Volume 4     C   DISCO        NTFS   Partition     79 GB Healthy    Boot
DISKPART> sele disk 1
Disk 1 is now the selected disk.
DISKPART> detail disk
DELL PERC H700 SCSI Disk Device
Disk ID: {A42559A8-43EF-4570-B4CF-336A22A718BF}
Type   : RAID
Status : Online
Path   : 1
Target : 1
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0400)#PCI(0000)#RAID(P01T01L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 5         DADOS        NTFS   Partition   2711 GB Healthy
    C:\DADOS\
DISKPART> sele disk 2
Disk 2 is now the selected disk.
DISKPART> detail disk
HP External HDD USB Device
Disk ID: 000904F0
Type   : USB
Status : Online
Path   : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 6         SOFTWARE     NTFS   Partition    300 GB Healthy
    C:\DADOS\DISCO-EXTRA\
Volume 7         TEMPORARIO- NTFS   Partition    148 GB Healthy
    C:\DADOS\NEW_TRANSF\TEMPORARIO\
Volume 8         TRANSF_LIXO NTFS   Partition    149 GB Healthy
    C:\DADOS\NEW_TRANSF\TRANSF_LIXO\
Volume 9     R   RESTORE      NTFS   Partition   1264 GB Healthy

Hi,
For finding the exact hard disk you could refer to this article. It is an old article but the structure is not changed:
How to Distinguish a Physical Disk Device from an Event Message
http://support.microsoft.com/kb/159865
Meanwhile for the error message "error was detected on device \Device\Harddisk3\DR3 during a paging operation", according to my search result it could be related to fragments. So please try a defragment on your hard disk (if it is the USB disk then perform
a defragment on USB disk) and see the result.
If you have any feedback on our support, please send to [email protected]

Cisco SG300 HOSTP_flash_operation: fatal error during read operation!

I have 2 Cisco SG300-52P switches. Earlier this week, one of them started dropping connections and POE was not working on a couple of devices... I came in this morning to restart them when no one else was around. After restarting them, the troublesome one was still not detecting POE devices.
I have been waiting for some down time to do a firmware update, so I thought this might straighten things out. I Downloaded the updated bootloader and firmware from Cisco's site. Updating the (non-problem) SG300 went exactly as it should. Upgrading the the bootloader on the problem SG300 went exactly as it should. Started the firmware update on the problem switch ....... and it didn't come back online. The power light was flashing, and occasionally the lights on ports would blink like they were trying to reset, but they never made it. There weren't really any special configurations on this switch so I had nothing to lose by trying a factory reset via the pinhole on the front ...... same result.
I connected to the serial port via a win7 PC with putty. .. All setting per Cisco. I got a message that the connection was detected, but it would not accept keyboard input. I power cycled the SG300 and watched the messages go by ... It looked like everything was working. I even got a message that the "Initialization task was completed"..
Then this message "HOSTP_flash_operation: fatal error during read operation!"
We have had a couple of internet and power outages recently, but I am trying to rule out other issues before blaming it on that.
any suggestions?
putty output file attached

I am not familiar with SG series products, but looking at the error message in the attached file, it appears there is an issue with reading from the flash. It could be that the flash file is corrupted and the flash needs to be formatted and then reload the software again.
If you have support contract on the product, I would suggest you open a TAC ticket with Cisco and have them help you.
HTH

Unhandled exception detected during a "MergeData" operation.

I am trying to open a Interactive PDF form through browser window.
I am running a SAP ABAP+Java ERP ECC 6.0 system and i have installed ADS service. All four tests, FP_TEST_00, FP_PDF_TEST_00, FP_TEST_IA_00 and FP_CHECK_DESTINATION_SERVICE run okay and when i try to open the form through transaction SFP it opens okay and i get the form.
But when i go directly to the URL i get the following error:
The termination type was: RABAX_STATE
The ABAP call stack was:
 Method: UPDATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
 Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
 Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
 Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
 Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
 Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
 Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
 Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
 Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
 Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
So i changed the trace level in Visual Administrator to ALL and there i see this error:
#1.5#001A640A9F9400550000002B00006C45000457180646BBDB#1221660602973#com.sap.engine.services.webservices.server.runtime.com.adobe_AdobeDocumentServices.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.sap.engine.services.webservices.server.runtime.com.adobe_AdobeDocumentServices.AdobeDocumentServices#ADSUSER#107##ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Path##Plain###Local interface will be used to invoke method: public com.adobe.RpReturn com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(com.adobe.RpString[],com.adobe.RpStream[])#
#1.5#001A640A9F9400550000002C00006C45000457180646BC54#1221660602973#com.sap.engine.services.webservices.server.runtime.com.adobe_AdobeDocumentServices.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.sap.engine.services.webservices.server.runtime.com.adobe_AdobeDocumentServices.AdobeDocumentServices.EJBImplementationContainer [invokeMethod(...)]#ADSUSER#107##ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Path##Plain###Invoking method 'public com.adobe.RpReturn com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(com.adobe.RpString[],com.adobe.RpStream[])'...#
#1.5#001A640A9F9400550000002D00006C45000457180646BEB1#1221660602973#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Info##Plain###Non-secure Adobe Document Services request received.#
#1.5#001A640A9F9400550000002E00006C45000457180646BF61#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Info##Plain###Tracecould not be found in request strings.#
#1.5#001A640A9F9400550000002F00006C45000457180646BF99#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Info##Plain###Check if IIOP service is running.#
#1.5#001A640A9F9400550000003000006C45000457180646BFD1#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###IIOP service is running#
#1.5#001A640A9F9400550000003100006C45000457180646C00A#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Info##Plain###Created a new reference to the DataManager#
#1.5#001A640A9F9400550000003200006C45000457180646C040#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Search input Streams for: PDFDocument#
#1.5#001A640A9F9400550000003300006C45000457180646C09A#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###PDFDocument length = 245#
#1.5#001A640A9F9400550000003400006C45000457180646C0D3#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###PDFDocument contents:
<PDFDocument><InputPDF><URI><Source>Stream</Source><Name>PDF</Name></URI></InputPDF><MergeData><Data><Source>Stream</Source><Name>XFD</Name></Data></MergeData><ReturnPDF><URI><Type>Stream</Type><Name>PDFOut</Name></URI></ReturnPDF></PDFDocument>#
#1.5#001A640A9F9400550000003500006C45000457180646C119#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Info##Plain###Build DOM for: PDFDocument#
#1.5#001A640A9F9400550000003600006C45000457180646C14B#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Document size: 245#
#1.5#001A640A9F9400550000003700006C45000457180646C184#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Creating ByteArrayInputStream from Document byte array#
#1.5#001A640A9F9400550000003800006C45000457180646C1B7#1221660602974#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Instantiating a new Document Builder from the Document Builder Factory#
#1.5#001A640A9F9400550000003900006C45000457180646C8AF#1221660602976#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Invoking DocumentBuider parse API: PDFDocument#
#1.5#001A640A9F9400550000003A00006C45000457180646CA2E#1221660602976#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Successfully built DOM through DocumentBuilder API for: PDFDocument#
#1.5#001A640A9F9400550000003B00006C45000457180646CA6B#1221660602976#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Successfully created DOM for: PDFDocument#
#1.5#001A640A9F9400550000003C00006C45000457180646CAB8#1221660602976#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Processing PDFDocument instructions#
#1.5#001A640A9F9400550000003D00006C45000457180646CB87#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Parsing Source = Stream#
#1.5#001A640A9F9400550000003E00006C45000457180646CBCA#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Parsing Name = PDF#
#1.5#001A640A9F9400550000003F00006C45000457180646CC0C#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Validate PDFDocumentXML InputPDF request#
#1.5#001A640A9F9400550000004000006C45000457180646CC43#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Process input PDF#
#1.5#001A640A9F9400550000004100006C45000457180646CC79#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Get PDF from input: PDFfrom source: Stream#
#1.5#001A640A9F9400550000004200006C45000457180646CCB4#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Create file databuffer from byte array#
#1.5#001A640A9F9400550000004300006C45000457180646CCE6#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Get temporary file name#
#1.5#001A640A9F9400550000004400006C45000457180646CD1C#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Performing DataManager lookup.#
#1.5#001A640A9F9400550000004500006C45000457180646CD4F#1221660602977#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Performing DataManager service lookup.#
#1.5#001A640A9F9400550000004600006C45000457180646DB11#1221660602981#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Manage temporary file#
#1.5#001A640A9F9400550000004700006C45000457180646DEED#1221660602982#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Search input Streams for: XFD#
#1.5#001A640A9F9400550000004800006C45000457180646DF2E#1221660602982#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Get temporary file name#
#1.5#001A640A9F9400550000004900006C45000457180646E15C#1221660602982#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Create file databuffer#
#1.5#001A640A9F9400550000004A00006C45000457180646E367#1221660602983#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Manage temporary file#
#1.5#001A640A9F9400550000004B00006C45000457180646E528#1221660602983#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Create file databuffer#
#1.5#001A640A9F9400550000004C00006C450004571806470B85#1221660602993#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Get temporary file name#
#1.5#001A640A9F9400550000004D00006C4500045718064714B0#1221660602995#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Create file databuffer#
#1.5#001A640A9F9400550000004E00006C450004571806475C91#1221660603014#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Manage temporary file#
#1.5#001A640A9F9400550000004F00006C450004571806475EB4#1221660603014#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Info##Plain###Created a PDF Manipulation Module for PDF: /tmp/adobewa_RD2_13969350/DM2506205283468036964.dir/DM-1356174493919510228.tmp#
#1.5#001A640A9F9400550000005000006C450004571806476D69#1221660603018#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Merge data#
#1.5#001A640A9F9400550000005100006C450004571806476DC8#1221660603018#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Debug##Plain###Initializing the CORBA XMLForm Module factory#
#1.5#001A640A9F9400550000005300006C450004571806478C1F#1221660603026#com.adobe.AdobeDocumentServicesWorker#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServicesWorker#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Error#1#/System/Server#Plain###Unhandled exception detected during a "MergeData" operation.
Request start time: Wed Sep 17 14:10:02 GMT 2008#
#1.5#001A640A9F9400550000005400006C450004571806478D05#1221660603026#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#107#SAP J2EE Engine JTA Transaction : [0ffffffd527ffffffc6002ffffffed]#ls45rmca45dev2_RD2_13969350#ADSUSER#5225490084c211dd8439001a640a9f94#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###
Unhandled exception detected during a "MergeData" operation.
Request start time: Wed Sep 17 14:10:02 GMT 2008
java.lang.NullPointerException
Just so you know, i am running a stand-alone JAVA instance for the ADS service because it doesn't run on ppc64 and i have connected my server to this stand-alone server.

Hi Chad,
Glad to hear the issue is resolved. Content types could be used for multiple lists in SharePoint site at the same time.
However, I'm not quite sure why you said the resolution is for a "bug". I read the article per your link:
http://www.andrewconnell.com/blog/SP2013-Workflow-Custom-Task-Outcomes
The article is showing how to create custom outcomes buttons in task forms. As I understand, the issue you encountered is that workflow migrated from the other site shows the suspended status.
Please be more specific on the issue if assistance is needed. If this is the second question, I’d recommend you open another thread in the relevant forum and provide specific information about the issue. In order to avoid confusion and keep track of troubleshooting
steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently.
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Unhandled exception detected during a "Render" operation

Hi,
 I am working on Adobe forms where in am using Enumerated dropdownds. I do not know the reason why I am getting this render exception error all of a sudden.
This was the same application that was working last week.
I have tried several ways by creating a new form, changing the template but could not figure out the problem since 3 days. Pl help.
Configuration:
WDS 7.0.1 and NWSP12
Adobe Live Cycle Designer 7.1
Adobe Reader 8.1.1


Error Stack:
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Unhandled exception detected during a "Render" operation. Request start time: Mon Nov 19 00:28:28 CST 2007 java.lang.IllegalStateException: Bad transaction status 1 Exception Stack Trace: java.lang.IllegalStateException: Bad transaction status 1 at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:75) at com.adobe.ads.request.RemoteRenderer.initializeFactory(Unknown Source) at com.adobe.ads.request.RemoteRenderer.renderAllRemote(Unknown Source) at com.adobe.ads.request.RemoteRenderer.renderAll(Unknown Source) at com.adobe.ads.request.RemoteRenderer.renderAll(Unknown Source) at com.adobe.ads.request.Renderer.renderWithoutCache(Unknown Source) at com.adobe.ads.request.Renderer.execute(Unknown Source) at com.adobe.BaseADSRequest.doWork(Unknown Source) at com.adobe.AdobeDocumentServicesWorker.processRender(Unknown Source) at com.adobe.AdobeDocumentServicesWorker.execute(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source) at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126) at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157) at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79) at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92) at SoapServlet.doPost(SoapServlet.java:51) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
 at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
 at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:98)
 at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:121)
 at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:336)
 ... 29 more
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException:
Unhandled exception detected during a "Render" operation.
Request start time: Mon Nov 19 00:28:28 CST 2007
java.lang.IllegalStateException: Bad transaction status 1
Exception Stack Trace:
java.lang.IllegalStateException: Bad transaction status 1
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException:
Unhandled exception detected during a "Render" operation.
Request start time: Mon Nov 19 00:28:28 CST 2007
java.lang.IllegalStateException: Bad transaction status 1
Exception Stack Trace:
java.lang.IllegalStateException: Bad transaction status 1
 at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:75)
Thanks in Advance,
Vasu

Raja,
Can you please provide more information regarding what SP are you on, Designer version etc.
Also check solutions in below threads with similar errors and see if helps you.
ADS error
XMLForm.exe not found
Chintan

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Error "logical end of file reached during read operation"

I am trying to burn a dvd of a wedding I did, and this is the error I am getting. After 5 hours of it trying to burn when I click cancel this it says " logical end of file reached during read operation". Does anyone know what this means, and how I can fix it? I am anxious to get this wedding finished and out to the customer. Any help would be greatly appreciated.

How long is the wedding video?
My standard list of things to do first...
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Run Cache Out X (free download) to clear all system and application caches.
Reboot your Mac.
If you still can not get it to run correctly, next thing to try is to throw out the iDVD preference file (don't forget to change back those preferences you want different from the defaults next time you run it). If it still doesn't work, then I would suggest you reinstall iDVD.
Patrick

Error detected during paging operation

Similar Messages

Maybe you are looking for