Error determining whether the target server is already a domain controller: The target server is already a Domain Controller.

So basically, I was promoting a new server to a DC. It said the promotion failed. I rebooted the server and low and behold, it is acting like a domain controller. It is moved to the domain controller OU, it is replicating fine, it knows
who has the FSMO roles and I see no other problems. However, server manager is still telling me to promote the machine to be a DC as can be seen here:
If I click the link to run DC Promo, I get this:
Is there any way to just tell the server that "yes this is a working DC" to get rid of the task in server manager? Or is there something else I should do to correct this?

Hi Vinny,
There are others who have encountered similar scenarios as yours, clicking the Post-deployment Configuration message is enough to make the message disappear for good.
Although I am more worried about that you mentioned the promotion failed, I suggest you run DCdiag.exe on this machine to examine if the DC is healthy.
More information for you:
Server 2012 DC Promotion Bug
http://social.technet.microsoft.com/Forums/windowsserver/en-US/221ed1ff-fc16-4c5d-ae05-edea7a9076be/server-2012-dc-promotion-bug?forum=winserverDS
Troubleshooting Domain Controller Deployment
http://technet.microsoft.com/en-us/library/jj592690.aspx
Best Regards,
Amy

Similar Messages

Error determining whether the target server is already a domain controller: Failed to open the runspace pool

Hi there , i already have some others DC running w2k12 R2 on the env, but when i was promoting another new DC running w2k12 R2 on the middle of the AD sync , the server encounter an error and rebooted it self ; after the server came back online , it keep
saying that a configuration is required for AD Domain Services , like the step when you are about to promote the server , but when you try to promote it , the error "Error determining whether the target server is already a domain controller: Failed
to open the runspace pool. The server manager winrm plug-in might be corrupted or missing."

Hi,
Thanks for your post.
Please waitting for the replication is finished and rerun the domain prep command to check the result.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

2012R2 Checkpoint Backups Fail - "The disk signature of disk1 is equal to the disk signature of disk0"

Before reading any further please note there are no actual disk signature problems per other threads on technet. I mounted all VHD's on the host and none reported offline. I manually checked all VHD disk signatures to the host and all were unique. I loaded
a brand new fresh 2012R2 VM/VHD and at first fine, but after installing updates the problem occurs.
I believe a Windows Update is causing this error but do not know which one. I had a 2012 (non r2) VM that backed up fine, however after upgrading it to 2012R2 integration services and updates, this VM also has the below listed errors. Whether or not there
is only one disk in the VM or multiple the following error is occurring. If I save all the VM's first I get a good and successful backup and checkpoint/snapshot transfers to backup location correctly. It is only when the VM's are running and checkpoint the
process fails.
When a backup is initiated on the 2012R2 host the VM's enter into the backing up state and are still live (not saved).
The following sequence of events occur in the VMs:
Event ID: 58
Source: partmgr
"The disk signature of disk 1 is equal to the disk signature of disk 0"
Event ID: 7036
Source: Service Control Manager
"The portable device enumerator service service entered the running state"
Event ID: 58
Source: partmgr
"The disk signature of disk 1 is equal to the disk signature of disk 0"
Event ID: 98
Source: Ntfs
"Volume E: (\Device\HarddiskVOlume3) is healthy. No action is needed"
Event ID: 98
Source: Ntfs
"Volume F: (\Device\HarddiskVolume4) is healthy. No action is needed"
Event 157
Source: Disk
"Disk 1 has been surprise removed"
I can see in device manager that a Microsoft Virtual Disk is created and then disappears (greys out if viewing hidden devices)
Once Event 157 occurs, the VM's are merged back successfully and the following error occurs on the host.
Log Name: Application
Source: VSS
Date: 4/26/2014 8:00:58 PM
Event ID: 8229
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: SERVER
Description:
A VSS writer has rejected an event with error 0x800423f3, The writer experienced a
transient error. If the backup process is retried,
the error may not reoccur.
. Changes that the writer made to the writer components while handling the event will not
be available to the requester. Check the event log for related events from the application
hosting the VSS writer.
Operation:
PostSnapshot Event
Context:
Execution Context:
Writer
Writer Class Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Name: Microsoft
Hyper-V VSS Writer
Writer Instance ID: {2aa82577-e446-4340-9afe-1e75fa3a52d4}
Command
Line: C:\Windows\system32\vmms.exe
Process ID: 2088
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="VSS" />
<EventID Qualifiers="0">8229</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-27T03:00:58.000000000Z" />
<EventRecordID>2254</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER</Computer>
<Security />
</System>
<EventData>
<Data>0x800423f3, The writer experienced a transient error. If the backup process is
retried,
the error may not reoccur.
</Data>
<Data>
Operation:
PostSnapshot Event
Context:
Execution Context: Writer
Writer
Class Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Name: Microsoft Hyper-V VSS
Writer
Writer Instance ID: {2aa82577-e446-4340-9afe-1e75fa3a52d4}
Command Line: C:
\Windows\system32\vmms.exe
Process ID: 2088</Data>
I have found no relevant information regarding this error please advice if anyone has opened a case on this and has a reported solution. It appears to be an issue with the new checkpoint process in 2012R2 possibly created by a recent update.
Thanks in Advance

Hi CCPD,
Thanks for contacting Microsoft.
From your description, I learnt that the issue you are experiencing is that you failed to backup VMs when the VM is running. Pleas let me know if I misunderstand anything.
Firstly, please let me know which backup tool you are using to perform backup. And please let mw know how the issue goes if you use Windows Server Backup feature.
After that, please install the Windows Server 2012 R2 newest update rollup as below.
==========================================================
Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 update rollup: February 2014
http://support.microsoft.com/kb/2919394
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

File Repository Server error : Failed to determine whether there is enough

Hi, We have setup a new server and while loading file we are getting following error message.
File Repository Server error : Failed to determine whether there is enough disk space. We are on BOXI R2 SP3 on windows server 2003 with WAS on IIS 6.0.
From CMC the error message is:
There was an error while retrieving data from the server: Unable to open file C:\WINDOWS\TEMP\tmp875.txt.
I ran Input FRS with a particular port and was able to ping FRS on that port. So port is opened.
Does anyone know reason for this?
Thanks,
Kalpesh

Can you elaborate exactly what you had to resolve this issue.
Thanks, Mani

The Server Behavior panel cannot determine whether "Command" or "Recordset (Query)" ...

Suddenly getting this goofball message in DW5.5 on Win7:
"The Server Behavior panel cannot determine whether "Command" or "Recordset (Query)" is applied to your page. Please select Edit Server Behaviors and change one of the two behaviors to ensure that each is uniquely identifiable."
Crazy thing is, it only happens on my workstation.
DW5.5 on my laptop opens the same .asp pages without this crazy message popping up.
Anybody know what the issue is?

I'd suggest that no answer means no answer yet. The person who can help may not have been on the forum the day the post was made.
That said, I'm starting to suspect that the cause must be an extension. Both boxes have the same version of DW and the same OS but both don't have the exact same extensions installed. Will play around and see what happens.

In VS Setup project, I want to determine whether SharePoint is installed in the machine or not using "Search Target Machine"

I am using this RegKey "SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\14.0" to find the availability of SP2010. It's not worked as expected. So i have run the sample program(code lines given below) to fetch the key value. I found that below
code returns null. In the regedit i can see the 14.0 Folder in the same path.
string name = @"\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\14.0";
RegistryKey key = Registry.LocalMachine.OpenSubKey(name);
Can Someone Assist where is the problem ??

Hope below will help you:
http://msdn.microsoft.com/en-us/library/ff721969.aspx
http://gallery.technet.microsoft.com/Detect-installed-dd79a8ed

Publish error - error determining the .Mac publish configuration values

I have been unable to publish a website refresh for the past 2 weeks (not since the first time I tried). When I attempt to publish, it hangs at the "preparing to publish" window and then gives the error message "There was an error determining the .Mac publish configuration values. Please try again in a few minutes." It does not then release this error window to close until it pops open another window telling me how many days I have left on my trial .mac account. It has the correct number of days so I assume that it is communicating with the .mac server at some level. My internet connection is via satellite. This is my only option as I am shipboard. Update: I was able to able to connect via cable recently and, much to my surprise (and frustration), everything posted fine. I have the most recent updates for all software including iWeb running on a MacBook 2GHz, 2GB ram and 28GB free harddisk(iWeb 1.1.2 and OS X 10.4.8 build 8L2127 ). My internet connectivity is fine for other applications and for other aspects of iWeb. The primary reason I purchased the MacBook was to use the iWeb and its publishing capability. I note from other threads that this is an established problem with iWeb and satellite internet connections. Has there been any reliable fix established for this problem? The last thread I could find was last summer (and nothing from Apple), seemingly enough time for Apple (or the creative members of AppleNation) to address it. Given the high cost and sporadic reliability of shipboard internet, I'm hoping to use .mac to host site because of the incremental update capability. If there hasn't been a reliable fix determined, can anyone recommend a hosting site/method that does work reliably with iWeb and a satellite internet connection. I'm completely in the dark how this would work. This is my first website experience.
Any and all help would be greatly appreciated. I already sent out the .mac website in my Christmas letter so I'm fairly commited (but could recover, if unworkable)
Thanks mucho!
MacBook 2GHz, 2GB Mac OS X (10.4.8) shipboard satellite internet connection

Now that would be cool...if we could figure out how to tell iWeb to be a little more patient with network latency! From all the reports here, it seems that if anything, iWeb has gotten more stringent in its network latency tolerance over the various little updates.
I personally use .Mac for my iWeb hosting right now... But you are right... if you could find some alternate place to host your iWeb pages, then you can use any FTP program to do the uploading.... and maybe be more successful from the shipboard internet access.
You might take a look at some of the free webhosts available... http://www.free-webhosts.com/ I have had pretty good experience with http://www.hostfreeweb.com/.

Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil Loka

Please try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

Error -RFC_ERROR_SYSTEM_FAILURE- There is already a line with the same key.

Hi,
While executing a report in BEx am faced with the error above. It ocurs when i take a drill down on Purchase order number field ( free charact). I tried by inserting this info-object into rows but still teh same error occurs and the connection with teh server is snapped.
The said field is also an user input field and the variable does not seem to the working as data other than the input values is fetched. There is a dump in ST22 with teh following error analysis-
You wanted to add an entry to table
"\FUNCTION-POOL=RRK0\FORM=EMPTY_COPY_DAT_N\DATA=<L_TSX_CSKID>[2
you declared
with a UNIQUE KEY. However, there was already an entry with the
same key.
This may have been in an INSERT or MOVE statement, or within a
SELECT ... INTO statement.
Plz guide
Regards,
Saurabh Diwakar

Hi,
take a look at this SAP note:
Term ITAB_DUPLICATE_KEY; SAPLRRK0; empty_copy_dat_n_01
SAP Note Number: [966238 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393636323338%7d]
Regards
Andreas

After enabling iCloud, the calendar on my MacBook shows a window stating "moving calendar to server account. Then a box appears saying "server responded with an error message 403. Then another box shows "couldn't move calendar to iCloud, an error occurrre

After enabling iCloud, the calendar on my MacBook shows a window stating "moving calendar to server account. Then a box appears saying "server responded with an error message 403. Then another box shows "couldn't move calendar to iCloud, an error occurrre

iCloud's Calendar is full of errors and problems for me. The "Couldn't move your calendars to iCloud because an error occurred" is now gone (by itself) but nothing syncs between my Mac's Calendar to iCloud or my iPhone to iCloud.
I tried creating a new event directly on iCloud.com to see whether it pushes to any of my device and got this "This event couldn't be created because of a server error; please try again." error.
Apple, please fix this!!

I can not open Calender. The server responded with an error. Access to account "virgin net" is not permitted. The server responded: "403" to operation CalDAVAAccountRefreshQueueableOperation.

I can not access Calender.
Keep getting blocked by message.
The server responded with error.
Access to account "virgin net" is not permitted.
The server responded:
"403"
to operation.
CalDAVAaccountRefreshQueueableOperation.

Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
In the Internet Accounts preference pane, delete any calendar accounts you don't use.
If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
Step 2
You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
Show Declined Events
from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
Step 3
If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
Step 4
Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud.

Error message received submitting form via email - "Acrobat cannot connect to the server"

Some of my users are unable to submit form data. The forms are set up to be submitted via email and only a few of the users are effected. They have installed the latest versions of both Acrobat and Adobe Reader.
"Acrobat cannot connect to the server, but will automatically submit your form once the server is online. You can check tracker for the status of this submission."
"You have already submitted the data on this form and it is waiting to be sent. Further changes are not allowed until the prior data is sent."
I know that this question has been asked before, but there has not been a response. This is very frustrating.
Thanks for any help or sugesstions.

I have this exact same error, but also have not yet found a workaround.
Only sporatic users get the error, and I've been unable to duplicate it from my machine. I am on Adobe Reader v 10.1.2.
Actually I can get around the error if I were to downgrade to Adobe v9, but that is a bandaid fix - not really a secure answer.

The SELECT permissions was denied on the object 'extended_properties', database 'mssqlsystemresource', schema 'sys'.(Microsoft SQL Server, Error:229

I have a SQL Server connected intro a Windows Server 2003 Domain Active Directory, the server holds a default instance with a single Database, the SQL Server is 2005 Std Edition, and is using mix mode Authentification, then I able to create SQL Native Users
and Invoque Windows Domain Users also.
The Goal of this project is remove the sysadmin Server role for all the Windows Domain Users, to give then a more granular secure model but at the moment is this only way to connect at the Data Base Server.
I already create Native SQL Servers users without any problem!, they respect Securable Setting, Server Roles, User Mapping, everything...Just when I create a Login Profile form a Domain Users and apply the same setting, I get this error...
The SELECT permissions was denied on the object 'extended_properties', database 'mssqlsystemresource', schema 'sys'.(Microsoft SQL Server, Error:229)
But if the user have sysadmin Server Rol he can sing over the server without any issue, I review the .sys view extended_properties and "Public" is the only Database Role placed.
Any Idea if I need change any Setting in the Secure in SQL Master DataBase? or which is the issue witjh this matter?
Thank in advance for your help!

Since there are so many possibilities for what might be wrong. Here's another possibility to look at. I ran into something where I had set up my own roles on a database. (For instance, "Administrator", "Manager", "DataEntry",
"Customer", each with their own kinds of limitations) The only ones who could use it were "Manager" role or above--because they were also set up as sysadmin because they were adding users to the database (and they were highly trusted).
Also, the users that were being added were Windows Domain users--using their domain credentials. (Everyone with access to the database had to be on our domain, but not everyone on the domain had access to the database--and only a few of them had access
to change it.)
Anyway, this working system suddenly stopped working and I was getting error messages similar to the above. What I ended up doing that solved it was to go through all the permissions for the "public" role in that database and add those permissions
to all of the roles that I had created. I know that everyone is supposed to be in the "public" role even though you can't add them (or rather, you can "add" them, but they won't "stay added").
So, in "SQL Server Management Studio", I went into my application's database, in other words (my localized names are obscured within <> brackets): "<Computername> (SQL Server <version> - sa)"\Databases\<MyAppDB>\Security\Roles\Database
Roles\public". Right-click on "public" and select "Properties". In the "Database Role Properties - public" dialog, select the "Securables" page. Go through the list and for each element in the
list, come up with an SQL "Grant" statement to grant exactly that permission to another role. So, for instance, there is a scalar function "[dbo].[fn_diagramobjects]" on which the "public" role has "Execute" privilege.
So, I added the following line:
EXEC ( 'GRANT EXECUTE ON [dbo].[fn_diagramobjects] TO [' + @RoleName + '];' )
Once I had done this for all the elements in the "Securables" list, I wrapped that up in a while loop on a cursor selecting through all the roles in my roles table. This explicitly granted all the permissions of the "public" role to
my database roles. At that point, all my users were working again (even after I removed their "sysadmin" access--done as a temporary measure while I figured out what happened.)
I'm sure there's a better (more elegant) way to do this by doing some kind of a query on the database objects and selecting on the public role, but after about half and hour of investigating, I wasn't figuring it out, so I just did it the brute-force method.
In case it helps someone else, here's my code.
CREATE PROCEDURE [dbo].[GrantAccess]
AS
DECLARE @AppRoleName AS sysname
DECLARE AppRoleCursor CURSOR LOCAL SCROLL_LOCKS FOR
SELECT AppRoleName FROM [dbo].[RoleList];
OPEN AppRoleCursor
FETCH NEXT FROM AppRoleCursor INTO @AppRoleName
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC ( 'GRANT EXECUTE ON [dbo].[fn_diagramobjects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_alterdiagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_creatediagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_dropdiagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_helpdiagramdefinition] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_helpdiagrams] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_renamediagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[allocation_units] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assemblies] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_files] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_references] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[asymmetric_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[certificates] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[change_tracking_tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[check_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[column_type_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[column_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[computed_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_endpoints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_groups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_priorities] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[crypt_properties] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[data_spaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_audit_specification_details] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_audit_specifications] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_files] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_permissions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_principal_aliases] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_principals] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_role_members] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[default_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[destination_data_spaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[event_notifications] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[events] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[extended_procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[extended_properties] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[filegroups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[foreign_key_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[foreign_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_catalogs] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_catalog_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_fragments] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_stoplists] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_stopwords] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[function_order_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[identity_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[index_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[internal_tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[key_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[key_encryptions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[message_type_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[module_assembly_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[numbered_procedure_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[numbered_procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameter_type_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameter_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_functions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_range_values] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_schemes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partitions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[plan_guides] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[remote_service_bindings] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[routes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[schemas] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contract_message_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contract_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contracts] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_message_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_queue_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_queues] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[services] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[spatial_index_tessellations] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[spatial_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sql_dependencies] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[stats] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[stats_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[symmetric_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[synonyms] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syscolumns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syscomments] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysconstraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysdepends] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfilegroups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfiles] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysforeignkeys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfulltextcatalogs] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysindexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysindexkeys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysmembers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysobjects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syspermissions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysprotects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysreferences] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[systypes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysusers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[table_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[transmission_queue] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[trigger_events] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[triggers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[type_assembly_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_attributes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_collections] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_component_placements] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_components] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_elements] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_facets] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_model_groups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_namespaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_wildcard_namespaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_wildcards] TO [' + @AppRoleName + '];' )
FETCH NEXT FROM AppRoleCursor INTO @AppRoleName
END
CLOSE AppRoleCursor
RETURN 0
GO
Once that is in the system, I just needed to "Exec GrantAccess" to make it work. (Of course, I have a table [RoleList] which contains a "AppRoleName" field that contains the names of the database roles.)
So, the mystery remains: why did all my users lose their "public" role and why could I not give it back to them? Was this part of an update to SQL Server 2008 R2? Was it because I ran another script to delete each user and add them back
so to refresh their connection with the domain? Well, this solves the issue for now.
One last warning: you probably should check the "public" role on your system before running this to make sure there isn't something missing or wrong, here. It's always possible something is different about your system.
Hope this helps someone else.

Error determining whether the target server is already a domain controller: The target server is already a Domain Controller.

Similar Messages

Maybe you are looking for