Error: Device type SWIN does not support page..

Hi All,
I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
Device type SWIN does not support page for  ZSTICKER(my page name).
Please do needful help ASAP.
-Dharmesh

Hi,
You need to link your new page to a device type.  Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
Regards,
Nick

Similar Messages

  • Device type does not support page format

    Hi All,
    There is one issue when I print a sapscript. I get an error message as follows:
    Device type EPESCP9 does not support page format ZSG02
    Could someone advise?
    Thanks
    Alice

    Hi,
      The page format ZSG02 is not present in Device type EPESCP9.
    in SPAD t.code add the page format in that device type.
    Better inform to BASIS people they will add page format in that device type.
    Refer the link Device type does not support page format
    Regards,
    Dhina..

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Cat0-3750 upgrade. Error: system number 1 does not support the same feature

    I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
    Ios Image File Size: 0x00877A00
    Total Image File Size: 0x00B04200
    Minimum Dram required: 0x08000000
    Image Suffix: ipservicesk9-122-37.SE1
    Image Directory: c3750-ipservicesk9-mz.122-37.SE1
    Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
    Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
    Error: The image in the archive which would be used to upgrade
    Error: system number 1 does not support the same feature set.
    Any ideas?
    Chris

    I was having the same issue even with entering the following:
    archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    I noticed the image which was running on the switch was correct without the ".bin" at the end:
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
    I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
    3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
    Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
    [OK - 24893440 bytes]
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
    Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    examining image...
    extracting info (100 bytes)
    extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
    extracting info (100 bytes)
    System Type:             0x00010002
      Ios Image File Size:   0x017BDA00
      Total Image File Size: 0x017BDA00
      Minimum Dram required: 0x08000000
      Image Suffix:          sm10g-150-2.SE7
      Image Directory:       c3kx-sm10g-mz.150-2.SE7
      Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
      Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
      FRU Module Version:    03.00.78
    Updating FRU Module on switch 1...
    Updating FRU FPGA image...
    FPGA image update complete.
    All software images installed.
    Worked for me, hope this helps.

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

  • When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

    When trying to view the Paul McCartney live concert, I received an error that this computer does not support live streaming

    If you're referring to streaming via itv.com, the minimum system requirements can be found here.

  • Error : software component version does not support this object type.

    Hi ,
    We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR  .
    How can we solve this error.
    Regards,
    Syed
    Edited by: Umar Syed on Jun 11, 2009 12:01 PM

    Hi Srinivas,
    We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
    Once we login to our ESR from index page we have this option to choose
    Available Profiles :         Process Definition
                                       Service Definition
                                       Unregistered.
    We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
    Regards,
    Syed

  • Why do I get  this error message "This volume does not support permanent version storage."

    I get this error message when I save a "pages 09" document edited on my macbook pro but saved to my mac mini (over a wifi network). All my Macs are running 10.9.3. My Mac mini is using time machine to back up to a separate hard drive (USB 3 connection). I Tried using Page 5.2 but it is a disaster over my network, slow, crashes, creates random folders....

    According to Apple network volumes do not support built in 'versions'…
    OS X Server: "The document 'file name' is on a volume that does not support permanent version storage" alert
    If in doubt Google the error text with any personal info removed.
    Work on it locally & copy it to the network daily if you need versions, otherwise use a real 'version control system' that you have some actual control over like GIT. It is designed for code projects, but you can cram anything in if you really want.
    http://www.git-scm.com
    I suspect Apples file format will make it miserable with Pages, but there are some great Mac GIT apps.
    Using Time Machine would be probably be suffice (run it on the Mac you use as the server & then restore versions on that Mac).

  • Exchange 2007 New Install Error - Read only MultiValuedProperty does not support this operation

    Existing Server/Exchange 2003 environment. New 2003 R2 x64 server fully patched and updated with no other apps installed attempting to install Exchange 2007 SP2.
    Initially I was getting the error "Could not find the default Administrative Group ‘Exchange Administrative Group (FYDIBOHF23SPDLT)’". This I
    fixed by completely uninstalling per this Microsoft article,
    this Microsoft FixIt article and this recommended blog post, ending with
    setup.com /preparead. I'm making progress, because now I'm getting a new error attempting the install. Specifically, Hub Transport installation fails with "Read only MultiValuedProperty does not support this operation."
    Executing
    setup.com /prepareSchema fails. I've set the msExchVer attribute for CN=Offline Address Lists to 4535486012416 and gotten no change, the install still fails. This
    Googled page exactly describes my problem, and all anyone could say was to add this version number. It doesn't work. Pretty much none of the threads I've read have a resolution beyond this. I'm stumped, any help would be greatly appreciated.

    What's the error message when executing  setup.com /prepareSchema fails? failed at Organization Checks?
    Could you please check whether you are on the right schema version?

  • HT4108 Digital AV adapter does not support iPad 2. Error message "This accessory does not supported by iPad"

    Just bought latest digital AV adapter MD098ZM/A. Does not work with my iPad 2. Error messade" this accessory is not supported by iPad" while the package saying it supports iPad 2 and later.

    It's works with the new iPad. It said "accessory not supported". I clicked OK and now it works.

  • Error msg says browser does not support HTML5 video. My FF and Flash up to date. Now what?

    Accessing bird nest cam on Cornell website. Plays well on PC. For my Samsung phone error says "==browser does not support html5" Updated FF for Android and Flash for Android, restarted phone and got same error message. Settings set for tap to play. Help

    Hi midlovines
    We need more troubleshooting details to help you:
    # What Android phone or tablet are you using? What version of Android OS (4.0 Ice Cream Sandwich, 4.1-3 jelly bean, 4.4 kitkat or 5.0 lollipop etc)
    # Please provide the URL of the "bird nest cam on Cornell website"
    Cheers!
    ...Roland

  • Using Outlook for Mac; emails and calendar announcements will not send--error message: "the server does not support secure connections" Help?

    Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?

    I have done a similar set of things and no results.
    This is really odd, Mac Mail works other emasil clients work, just not Outlook.
    The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time.  I ended up having to reset mine. 
    Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
    What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here?

  • DualCoreCenter error - "Dual Core Center does not support!"

    Hi, just bought the insanely expensive MSI 8800 GTX Ulta OC (£457), which seems to ship with insanely cheap utilities.
    I installed the Dual Core Center (after installing the 'latest' nvidia driver 158.22).
    During the install, it insisted on a net framework 2 repair/uninstall for some unknown reason (I have net framework 2 and 3 installed - ie all latest xp patches) with no prior problems.
    Anyway, I let it do the repair and install itself.
    Now when I run the DualCoreCentre, it comes up with error msg: "Dual Core Center does not support!"
    Can someone shed light on what that means please.
    Thanks...

    It means:
    I suck, don't use me!
    Stay away from MSI's utilities. If you want to overclock or control fan speeds or anything else.
    Have a look through: here

  • Problem with ichat, error message says computer does not support video chat

    I have never had a problem with Ichat until yesterday...now apparently I don't have the video capability.  I am running 10.7.2.  I turned off Facetime.  I now have the video camera image but it won't let me video chat.  Any ideas?

    Hi,
    In iChat open the Connection Doctor (Video menu) and the the Capabilities option
    Are all items showing Green ?
    Try restarting iChat (It re-reads the computers Ability at each launch)
    If that does not work try restarting the Computer.
    Make sure that in iChat menu > Preference > Video Section the Bandwidth Limit is not set to 100kbps (this is too Low for 1-1 video chats)
    Do a Speed test
    "Real World" speeds need at least 256kbps both up and down.
    Check the System Profiler is "seeing" the camera.
    It will be in Hardware > USB
    10:30 PM      Tuesday; March 27, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Error: You're browser does not support AJAX

    I am running my business software and I continue to get this error. I have safari, google chrome and firefox, but they all give me the same error. Any help? Is there some kind of plug-in or something that will allow me to use AJAX?
    Please help.

    If you say its a manufacturers error Camelot, than why is it slowly getting better with different browsers?
    In short, because the software developer is an idiot.
    Sorry if that sounds harsh, but it's the case.
    Any web developer (at least those that are worth anything) knows that there are differences between each browser's interpretation of HTML code, JavaScript and, especially, CSS. Because of these differences you cannot guarantee that a web page will look the same across all browsers. Sometimes the differences are minor (a line offset by a pixel or two, or text displaying in the wrong color) but sometimes the differences severely impact performance. That happens most often when the developer has a blinkered-eye view of the world, typically working with IE on Windows (which is known to be the quirkiest of browsers, although IE8 does a better job than IE7 or (ick) IE6). He might even have written VisualBasic code on the page which is guaranteed to not work on any non-Windows platform.
    The solution to this quandary has not yet been found. The best that anyone can do is test their code on different browsers. From the sounds of it, your developer only tested against IE, it seemed to work so he said he was done. If he'd tested in FireFox he would have seen the problem and could have fixed it, and the chances are that fix would have worked for other browsers, too.
    So, why doesn't it work? because the developer didn't write it to work in multiple browsers.

Maybe you are looking for