Error: DeviceTransientConnection - Transient connection attempt
Hello experts,
I have recently inherited a small CCM system (a publisher, no subscribers, one mgcp gateway)
For the most part everything seems to works ok, however, every couple of weeks we cannot place external calls (reorder tone), although we can receive incoming pstn calls. Internal calls work fine. I temporarily fix this problem by resetting the gateway. I have found nothing in the gateway logs or debug sessions that indicate a problem.
However, every forty seconds exactly, for weeks on end, and across reboots, I get the following event message:
Event Type: Error
Event Source: Cisco CallManager
Event Category: None
Event ID: 3
Date: 10/9/2006
Time: 4:56:23 PM
User: N/A
Computer: HQCCM1
Description:
Error: DeviceTransientConnection - Transient connection attempt.
Connecting Port: 0
Device name [Optional].:
Device IP address.: 192.168.253.1
Device type. [Optional]: 255
Reason Code [Optional].: 6
App ID: Cisco CallManager
Cluster ID: StandAloneCluster
Node ID: 192.168.1.6
Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.
Recommended Action: No action is required if this event was issued as a result of a normal device rehome..
What device is causing this? As a troubleshooting I went and eliminated every mtp, transcoder, and conference service we had and the error message continued. I only have one pri on the gateway.
Any ideas?
As indicated by the following link, the device type is "MODEL_UNKNOW" and the reason code indicates a connectivity error.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_error_message09186a0080208afa.html
Do you know what device has IP address 192.168.253.1?
What type of gateway and what IOS version are you using? There have been some DSP problems with certain versions of IOS that could cause the problem you are having. The link below references one such problem.
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCdu53333
Hope this helps. If so, please rate the post.
Brandon
Similar Messages
-
789 error.The L2TP connection attempt fail.
Hi
I configure the L2TP vpn an ASA-5520.I configured by the CLI mode.But I cant not connected to my laptop by vpn.A error is coming to my windows 7 laptop. The name of the error
789 error. The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.
In this regards what I do?????make sure IKE and AuthIP IPsec Keying Modules" service and the "IPsec Policy Agent" service is up and try to upgrade your network adapter driver
Sent from Cisco Technical Support iPad App -
Error 0xE80000650 on connect attempting to iphone with itunes
Can anyone tell me why my iphone 4s cannot be recognised by itunes software . I tried all the steps from apple website but I still get the same error 0xE80000650 . Thank you in advance !
I already tried the solution from that link u gave me before I posted my question . It didn't work. I was thinking it might be something else that I missed. Thanks
-
Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support -
I get error 792 Connection attempt failed because security negotiation time out. I am trying to connect a xp machine to my vpn.
I get error 792 Connection attempt failed because security negotiation time out. I am trying to connect a xp machine to my vpn.
-
Hi,
I am getting error while enabling the WCF-Custom receive location:
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system
I found solution over internet for regarding the above issue which was suggested that NETWORK SERVICE is not having required permission. Used subinacl with the following command (on Command prompt with elevated mode)
subinacl /service msdtc /grant="Network Service"=QSETIL
But the same resulted in error: Last Failed: msdtc - OpenService Error : 5 Access is denied.
Getting nowhere regarding this now. Please helpHi Harkirat,
Have you tried
these steps to Enable Network Access Securely for MS DTC?
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
After downloading OS 6, receive this error message "Cannot connect to Itunes store" after attempting to access the App Store. I can access Itunes. Advise
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Could be you are not connecting to the internet via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Why I keep getting Error: "Connection attempt has timed out, please verify internet connectivity". I'm using Windows 8.
Check the time and date, updates with apple' time servers
https://discussions.apple.com/docs/DOC-3046 -
ITunes Store Error Message: "network connection was reset"
I've been having trouble connecting to the iTunes Store since Dec. 25, 2006. The last time I was able to connect to the site was Jan. 2, 2007!
The error message that I have been receiving is: "iTunes could not connect to the iTunes Store. The network connection was reset."
Here are the troubleshooting issues that I have already performed.
1) Ensured that my internet connection was active.
2) Checked to make sure Windows XP Service Pack Updates were compatible. No problems with the firewall detected.
3) Have the latest version (7.02.16) of iTunes.
4) iPod software is up to date.
5) Ran iTunes diagnostics which states:
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection was reset.
Connection attempt to iTunes Store was unsuccessful.
The network connection was reset.
Secure connection attempt to iTunes Store was successful.
Does anyone have this problem? Can anyone recommend a solution that worked for them?
Sony Windows XPPS: I also went into Internet Explorer...
Selected Tools, selected Internet options, then selected Advanced Tab
Then I looked for the security section and made sure that SSL 2.0 was selected.
I was still unable to access iTunes Store. -
we are getting error while refreshing connection on excel sheet which containing data from data source in form of power pivot.
error is "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:"
I am confused about Configuring the Analysis Service in SharePoint Mode.
What account should be used for Configuring the Analysis Service in SharePoint Mode?
what are the steps and what permissions are required and where to add it?
can you please explain in detail so i can make sure about my account permission properly in my environment?
Do we need to install Analysis service on sharepoint server box or not? if yes, then what are steps to follow it?
it is mentioned here to have two services are running under manages services under sharepoint central,
https://msdn.microsoft.com/en-us/library/jj682085.aspx#bkmk_verify_powerpivot
but we don't have SQL Server Analysis Services
running under Manage
services on server.
what need to be done here to fix this issue ?
Thanks,
Deepak PatelHi Deepak,
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Meanwhile, could you please check if there is any related ULS log for help troubleshoot the issue when error occurs.
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/04/02/powerpivot-for-sharepoint-manual-data-refresh-failing.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Secure link to iTunes store failed and Connection attempt to firmware update server was unsuccessful
Hello everyone, Im facing error with my iTunes. When I run diagnostics i can see "Secure link to iTunes store failed" - please see the image below
Please note: as it is showing secure link to itunes is failed but still i can see iTunes store, but the above error shows when I run diagnostics.
After that when I go through the next and I found the diagnostics report as below, within report i have marked a line with RED colored "Connection attempt to firmware update server unsuccessful". I need HELP!!!!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Gigabyte Technology Co., Ltd. G31M-ES2C
iTunes 11.3.0.54
QuickTime not available
FairPlay 2.6.12
Apple Application Support 3.0.5
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B9F0069DE9C0
Current user is an administrator.
The current local date and time is 2014-08-05 01:48:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 8400 GS
**** External Plug-ins Information ****
No external plug-ins installed.
The drive G: ZTE USB SCSI CD-ROM Rev 2.31 is a USB 2 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {14DCBC2B-34CB-431B-8625-1E62D7310533}
Description: WAN (PPP/SLIP) Interface
IP Address: 10.128.133.101
Subnet Mask: 255.255.255.255
Default Gateway: 10.128.133.101
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 06:00:00 1970
Lease Expires: Thu Jan 01 06:00:00 1970
DNS Servers: 8.8.8.8
156.154.70.1
Active Connection: Teletalk
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-08-04 03:23:27.
**** Device Connectivity Tests ****
iPodService 11.3.0.54 is currently running.
iTunesHelper 11.3.0.54 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.Hi msahed,
Welcome to Apple Support Communities.
It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
iTunes: About the "A secure network connection could not be established" alert
http://support.apple.com/kb/ts1470
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
I hope this helps.
-Jason -
Starting Oracle 11gr2 Im getting Error: ORA-03135: connection lost contact
Hi Guys!
Thanks for your advises. I still working toward a resolution.
But I encountered another issue from Enterp Manager :
ERROR : Please correct the following error: Connection string must be specified.
My connection has this format:
//using connection string attributes to connect to Oracle Database
con.ConnectionString = "User Id=scott;Password=tiger;Data Source=oracle";
con.Open();
Console.WriteLine("Connected to Oracle" + con.ServerVersion);
Please tell me what is wrong here. Thanks. Dan.
Hi all !
I need help please for resolving the following :
Problem:
Im having frequent disconnection after abnormal shutdown due to power failure.
starting Oracle 11gr2 Im getting Error: ORA-03135: connection lost contact
Im on Laptop running Linux Centos 6.3 Host.
and Im running Oracle 11gr2 on Oracle Enterprise Linux in VMware (Guest).
When attempting login from the Oracle Enterprise Manager Database Control
I got Error: "Your username and/or password are invalid."
The alert.log is at the bottom
[test@localhost ~]$ xhost +
access control disabled, clients can connect from any host
[test@localhost ~]$
[test@localhost ~]$ su - root
Password:
[root@localhost ~]#
[root@localhost ~]# su - oracle
[oracle@localhost ~]$
[oracle@localhost ~]$ export ORACLE_SID=db11gr2
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_HOME
/u01/app/oracle/product/11.2.0/db_1
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_BASE
/u01/app/oracle
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_SID
db11gr2
[oracle@localhost ~]$
[oracle@localhost ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 04-DEC-2013 12:23:07
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 04-DEC-2013 12:23:08
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "db11gr2" has 1 instance(s).
Instance "db11gr2", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@localhost ~]$
[oracle@localhost ~]$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............... started.
Logs are generated in directory /u01/app/oracle/product/11.2.0/db_1/localhost.localdomain_db11gr2/sysman/log
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 12:26:38 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> shutdown abort;
ORACLE instance shut down.
SQL>
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
ORA-00600: internal error code, arguments: [4194], [: no
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
SQL>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 12:59:23 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL>
ERROR at line 1:
ORA-03135: connection lost contact
Process ID: 8973
Session ID: 1 Serial number: 5
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 13:12:03 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL> select STATUS, DATABASE_STATUS from v$instance;
STATUS DATABASE_STATUS
OPEN ACTIVE
SQL>
SQL> SELECT * FROM v$instance;
ERROR:
ORA-03114: not connected to ORACLE
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 13:17:37 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL> SELECT * FROM v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 db11gr2
localhost.localdomain
11.2.0.1.0 04-DEC-13 OPEN NO 1 STOPPED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
SQL>
alert log file
[oracle@localhost ~]$
[oracle@localhost ~]$ adrci
ADRCI: Release 11.2.0.1.0 - Production on Wed Dec 4 17:09:47 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
ADR base = "/u01/app/oracle"
adrci> set editor emacs
adrci> show alert
Choose the alert log from the following homes to view:
1: diag/rdbms/unknown/DB11G
2: diag/rdbms/db11gr2/db11gr2
3: diag/tnslsnr/localhost/listener
Q: to quit
Please select option: 2
*** glibc detected *** adrci: malloc(): memory corruption: 0x09de7160 ***
======= Backtrace: =========
/lib/libc.so.6[0x1d42dd]
/lib/libc.so.6(__libc_malloc+0x67)[0x1d5e97]
/lib/ld-linux.so.2[0x331f8a]
/lib/ld-linux.so.2[0x33215a]
/lib/ld-linux.so.2[0x32e3ce]
/lib/libc.so.6[0x272550]
/lib/libc.so.6(_dl_sym+0x1a)[0x2728fa]
/lib/libdl.so.2[0x110e08]
/lib/ld-linux.so.2[0x331e66]
/lib/libdl.so.2[0x1112cc]
/lib/libdl.so.2(dlsym+0x63)[0x110d93]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(sskgds_save_text_start_end+0x47)[0xa0fb37]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(skgdsinit+0xb7)[0xa0a909]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x15edea8]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(kgdsdsts+0x26)[0x15ef8c2]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdGetCallStackWFlag+0x102)[0x198961a]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdGetCallStack+0x2d)[0x198950d]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1989250]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdFillIncCtx+0x72)[0x1989088]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgexPopulateIncCtx+0x67)[0x1994d25]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgexProcessError+0x75)[0x1996437]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x19601c5]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgePostErrorDirect+0x650)[0x1960b3c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c58fb6]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x183c44e]
[0x3bb440]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1cf7966]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrlrReadAlertMsg+0x562)[0x1cf7126]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrxae_alert_ext+0x2d4)[0xbbcf44]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0xb9f25c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrmqmf_fetch_real+0x23f)[0xb9bc1f]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrmqmf_fetch+0xee)[0xb9b520]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0xb53c3e]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrip_relation_iterator+0x16c)[0xb531bc]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgripricm_rltniter_wcbf_mt+0x1f7)[0xb52709]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgripritc_rltniter_wcbf+0xe6)[0xb585f2]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvm_query+0x3f2)[0x1abe62c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvm_query_wcmd+0x36f)[0x1abf053]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c3e116]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c3f5b7]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c4e2ae]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvciec_exec_cmd+0x4a2)[0x1c4d640]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvci_main_int+0x43b)[0x1c59e61]
adrci[0x8048c5b]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(lpmcall+0x363)[0x1496ec3]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(lpmpmai+0x15c)[0x1497904]
adrci[0x8048aa5]
/lib/libc.so.6(__libc_start_main+0xdc)[0x17fe9c]
adrci[0x8048811]
======= Memory map: ========
00110000-00112000 r-xp 00000000 08:03 5925240 /lib/libdl-2.5.so
00112000-00113000 r-xp 00001000 08:03 5925240 /lib/libdl-2.5.so
00113000-00114000 rwxp 00002000 08:03 5925240 /lib/libdl-2.5.so
00114000-00139000 r-xp 00000000 08:03 5925284 /lib/libm-2.5.so
00139000-0013a000 r-xp 00024000 08:03 5925284 /lib/libm-2.5.so
0013a000-0013b000 rwxp 00025000 08:03 5925284 /lib/libm-2.5.so
0013b000-0014f000 r-xp 00000000 08:03 5925246 /lib/libpthread-2.5.so
0014f000-00150000 r-xp 00013000 08:03 5925246 /lib/libpthread-2.5.so
00150000-00151000 rwxp 00014000 08:03 5925246 /lib/libpthread-2.5.so
00151000-00153000 rwxp 00151000 00:00 0
00153000-00166000 r-xp 00000000 08:03 5925301 /lib/libnsl-2.5.so
00166000-00167000 r-xp 00012000 08:03 5925301 /lib/libnsl-2.5.so
00167000-00168000 rwxp 00013000 08:03 5925301 /lib/libnsl-2.5.so
00168000-0016a000 rwxp 00168000 00:00 0
0016a000-002a9000 r-xp 00000000 08:03 5925233 /lib/libc-2.5.so
002a9000-002aa000 --xp 0013f000 08:03 5925233 /lib/libc-2.5.so
002aa000-002ac000 r-xp 0013f000 08:03 5925233 /lib/libc-2.5.so
002ac000-002ad000 rwxp 00141000 08:03 5925233 /lib/libc-2.5.so
002ad000-002b0000 rwxp 002ad000 00:00 0
002b0000-002b1000 r-xp 00000000 08:03 3905250 /usr/lib/libaio.so.1.0.1
002b1000-002b2000 rwxp 00000000 08:03 3905250 /usr/lib/libaio.so.1.0.1
002b2000-002bb000 r-xp 00000000 08:03 5925256 /lib/libnss_files-2.5.so
002bb000-002bc000 r-xp 00008000 08:03 5925256 /lib/libnss_files-2.5.so
002bc000-002bd000 rwxp 00009000 08:03 5925256 /lib/libnss_files-2.5.so
002bd000-002c8000 r-xp 00000000 08:03 5925425 /lib/libgcc_s-4.1.2-20080825.so.1
002c8000-002c9000 rwxp 0000a000 08:03 5925425 /lib/libgcc_s-4.1.2-20080825.so.1
00324000-0033e000 r-xp 00000000 08:03 5925219 /lib/ld-2.5.so
0033e000-0033f000 r-xp 00019000 08:03 5925219 /lib/ld-2.5.so
0033f000-00340000 rwxp 0001a000 08:03 5925219 /lib/ld-2.5.so
003bb000-003bc000 r-xp 003bb000 00:00 0 [vdso]
003bc000-01fc3000 r-xp 00000000 08:03 4984633 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1
01fc3000-020a7000 rwxp 01c07000 08:03 4984633 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1
020a7000-020c1000 rwxp 020a7000 00:00 0
025b1000-027ce000 r-xp 00000000 08:03 5006042 /u01/app/oracle/product/11.2.0/db_1/lib/libnnz11.so
027ce000-027fc000 rwxp 0021d000 08:03 5006042 /u01/app/oracle/product/11.2.0/db_1/lib/libnnz11.so
027fc000-027fe000 rwxp 027fc000 00:00 0
08048000-08049000 r-xp 00000000 08:03 1407670 /u01/app/oracle/product/11.2.0/db_1/bin/adrci
08049000-0804a000 rw-p 00000000 08:03 1407670 /u01/app/oracle/product/11.2.0/db_1/bin/adrci
09d62000-09e0d000 rw-p 09d62000 00:00 0 [heap]
b7e00000-b7e21000 rw-p b7e00000 00:00 0
b7e21000-b7f00000 ---p b7e21000 00:00 0
b7f68000-b7f90000 rw-p b7f68000 00:00 0
bfc54000-bfc6d000 rwxp bffe5000 00:00 0 [stack]
bfc6d000-bfc6e000 rw-p bfffe000 00:00 0
starting Oracle 11gr2 Im getting Error: ORA-03135: connection lost contact
Im on Laptop running Linux Centos 6.3 Host.
and Im running Oracle 11gr2 on Oracle Enterprise Linux in VMware (Guest).
Im having frequent disconnection after abnormal shutdown due to power failure.
When attempting login from the Oracle Enterprise Manager Database Control
I got Error: "Your username and/or password are invalid."
[test@localhost ~]$ xhost +
access control disabled, clients can connect from any host
[test@localhost ~]$
[test@localhost ~]$ su - root
Password:
[root@localhost ~]#
[root@localhost ~]# su - oracle
[oracle@localhost ~]$
[oracle@localhost ~]$ export ORACLE_SID=db11gr2
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_HOME
/u01/app/oracle/product/11.2.0/db_1
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_BASE
/u01/app/oracle
[oracle@localhost ~]$
[oracle@localhost ~]$ echo $ORACLE_SID
db11gr2
[oracle@localhost ~]$
[oracle@localhost ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 04-DEC-2013 12:23:07
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 04-DEC-2013 12:23:08
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "db11gr2" has 1 instance(s).
Instance "db11gr2", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@localhost ~]$
[oracle@localhost ~]$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............... started.
Logs are generated in directory /u01/app/oracle/product/11.2.0/db_1/localhost.localdomain_db11gr2/sysman/log
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 12:26:38 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> shutdown abort;
ORACLE instance shut down.
SQL>
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
ORA-00600: internal error code, arguments: [4194], [: no
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
SQL>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 12:59:23 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL>
ERROR at line 1:
ORA-03135: connection lost contact
Process ID: 8973
Session ID: 1 Serial number: 5
SQL> startup;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 13:12:03 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL> select STATUS, DATABASE_STATUS from v$instance;
STATUS DATABASE_STATUS
OPEN ACTIVE
SQL>
SQL> SELECT * FROM v$instance;
ERROR:
ORA-03114: not connected to ORACLE
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus "/as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 4 13:17:37 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORACLE instance started.
Total System Global Area 799313920 bytes
Fixed Size 1339484 bytes
Variable Size 318771108 bytes
Database Buffers 473956352 bytes
Redo Buffers 5246976 bytes
Database mounted.
Database opened.
SQL>
SQL> SELECT * FROM v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 db11gr2
localhost.localdomain
11.2.0.1.0 04-DEC-13 OPEN NO 1 STOPPED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
SQL>
alert log file
[oracle@localhost ~]$
[oracle@localhost ~]$ adrci
ADRCI: Release 11.2.0.1.0 - Production on Wed Dec 4 17:09:47 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
ADR base = "/u01/app/oracle"
adrci> set editor emacs
adrci> show alert
Choose the alert log from the following homes to view:
1: diag/rdbms/unknown/DB11G
2: diag/rdbms/db11gr2/db11gr2
3: diag/tnslsnr/localhost/listener
Q: to quit
Please select option: 2
*** glibc detected *** adrci: malloc(): memory corruption: 0x09de7160 ***
======= Backtrace: =========
/lib/libc.so.6[0x1d42dd]
/lib/libc.so.6(__libc_malloc+0x67)[0x1d5e97]
/lib/ld-linux.so.2[0x331f8a]
/lib/ld-linux.so.2[0x33215a]
/lib/ld-linux.so.2[0x32e3ce]
/lib/libc.so.6[0x272550]
/lib/libc.so.6(_dl_sym+0x1a)[0x2728fa]
/lib/libdl.so.2[0x110e08]
/lib/ld-linux.so.2[0x331e66]
/lib/libdl.so.2[0x1112cc]
/lib/libdl.so.2(dlsym+0x63)[0x110d93]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(sskgds_save_text_start_end+0x47)[0xa0fb37]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(skgdsinit+0xb7)[0xa0a909]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x15edea8]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(kgdsdsts+0x26)[0x15ef8c2]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdGetCallStackWFlag+0x102)[0x198961a]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdGetCallStack+0x2d)[0x198950d]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1989250]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgemdFillIncCtx+0x72)[0x1989088]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgexPopulateIncCtx+0x67)[0x1994d25]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgexProcessError+0x75)[0x1996437]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x19601c5]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgePostErrorDirect+0x650)[0x1960b3c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c58fb6]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x183c44e]
[0x3bb440]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1cf7966]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrlrReadAlertMsg+0x562)[0x1cf7126]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrxae_alert_ext+0x2d4)[0xbbcf44]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0xb9f25c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrmqmf_fetch_real+0x23f)[0xb9bc1f]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrmqmf_fetch+0xee)[0xb9b520]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0xb53c3e]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgrip_relation_iterator+0x16c)[0xb531bc]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgripricm_rltniter_wcbf_mt+0x1f7)[0xb52709]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgripritc_rltniter_wcbf+0xe6)[0xb585f2]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvm_query+0x3f2)[0x1abe62c]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvm_query_wcmd+0x36f)[0x1abf053]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c3e116]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c3f5b7]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1[0x1c4e2ae]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvciec_exec_cmd+0x4a2)[0x1c4d640]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(dbgvci_main_int+0x43b)[0x1c59e61]
adrci[0x8048c5b]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(lpmcall+0x363)[0x1496ec3]
/u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1(lpmpmai+0x15c)[0x1497904]
adrci[0x8048aa5]
/lib/libc.so.6(__libc_start_main+0xdc)[0x17fe9c]
adrci[0x8048811]
======= Memory map: ========
00110000-00112000 r-xp 00000000 08:03 5925240 /lib/libdl-2.5.so
00112000-00113000 r-xp 00001000 08:03 5925240 /lib/libdl-2.5.so
00113000-00114000 rwxp 00002000 08:03 5925240 /lib/libdl-2.5.so
00114000-00139000 r-xp 00000000 08:03 5925284 /lib/libm-2.5.so
00139000-0013a000 r-xp 00024000 08:03 5925284 /lib/libm-2.5.so
0013a000-0013b000 rwxp 00025000 08:03 5925284 /lib/libm-2.5.so
0013b000-0014f000 r-xp 00000000 08:03 5925246 /lib/libpthread-2.5.so
0014f000-00150000 r-xp 00013000 08:03 5925246 /lib/libpthread-2.5.so
00150000-00151000 rwxp 00014000 08:03 5925246 /lib/libpthread-2.5.so
00151000-00153000 rwxp 00151000 00:00 0
00153000-00166000 r-xp 00000000 08:03 5925301 /lib/libnsl-2.5.so
00166000-00167000 r-xp 00012000 08:03 5925301 /lib/libnsl-2.5.so
00167000-00168000 rwxp 00013000 08:03 5925301 /lib/libnsl-2.5.so
00168000-0016a000 rwxp 00168000 00:00 0
0016a000-002a9000 r-xp 00000000 08:03 5925233 /lib/libc-2.5.so
002a9000-002aa000 --xp 0013f000 08:03 5925233 /lib/libc-2.5.so
002aa000-002ac000 r-xp 0013f000 08:03 5925233 /lib/libc-2.5.so
002ac000-002ad000 rwxp 00141000 08:03 5925233 /lib/libc-2.5.so
002ad000-002b0000 rwxp 002ad000 00:00 0
002b0000-002b1000 r-xp 00000000 08:03 3905250 /usr/lib/libaio.so.1.0.1
002b1000-002b2000 rwxp 00000000 08:03 3905250 /usr/lib/libaio.so.1.0.1
002b2000-002bb000 r-xp 00000000 08:03 5925256 /lib/libnss_files-2.5.so
002bb000-002bc000 r-xp 00008000 08:03 5925256 /lib/libnss_files-2.5.so
002bc000-002bd000 rwxp 00009000 08:03 5925256 /lib/libnss_files-2.5.so
002bd000-002c8000 r-xp 00000000 08:03 5925425 /lib/libgcc_s-4.1.2-20080825.so.1
002c8000-002c9000 rwxp 0000a000 08:03 5925425 /lib/libgcc_s-4.1.2-20080825.so.1
00324000-0033e000 r-xp 00000000 08:03 5925219 /lib/ld-2.5.so
0033e000-0033f000 r-xp 00019000 08:03 5925219 /lib/ld-2.5.so
0033f000-00340000 rwxp 0001a000 08:03 5925219 /lib/ld-2.5.so
003bb000-003bc000 r-xp 003bb000 00:00 0 [vdso]
003bc000-01fc3000 r-xp 00000000 08:03 4984633 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1
01fc3000-020a7000 rwxp 01c07000 08:03 4984633 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1
020a7000-020c1000 rwxp 020a7000 00:00 0
025b1000-027ce000 r-xp 00000000 08:03 5006042 /u01/app/oracle/product/11.2.0/db_1/lib/libnnz11.so
027ce000-027fc000 rwxp 0021d000 08:03 5006042 /u01/app/oracle/product/11.2.0/db_1/lib/libnnz11.so
027fc000-027fe000 rwxp 027fc000 00:00 0
08048000-08049000 r-xp 00000000 08:03 1407670 /u01/app/oracle/product/11.2.0/db_1/bin/adrci
08049000-0804a000 rw-p 00000000 08:03 1407670 /u01/app/oracle/product/11.2.0/db_1/bin/adrci
09d62000-09e0d000 rw-p 09d62000 00:00 0 [heap]
b7e00000-b7e21000 rw-p b7e00000 00:00 0
b7e21000-b7f00000 ---p b7e21000 00:00 0
b7f68000-b7f90000 rw-p b7f68000 00:00 0
bfc54000-bfc6d000 rwxp bffe5000 00:00 0 [stack]
bfc6d000-bfc6e000 rw-p bfffe000 00:00 0Hi,
Please check Oracle support id : Troubleshooting ORA-3135 Connection Lost Contact (Doc ID 787354.1) -
ERROR: Could not connect to WhatsApp service. Please try again later.
Hi,
Today there was a connection error with WhatsApp. I needed to send something, so decided to delete and then reinstall the app to try and attempt to fix the connection problem. I am using the iPhone 5C.
Once I redownloaded the app, I opened it and the app asked me for my phone number. I typed it in.
But to my surprise, I got this error:
Could not connect to WhatsApp service. Please try again later.
After several attempts of writing my phone number (100% in the correct format) I had found no luck or success.
Anyone else having this error, or is it just me? Please provide some steps on how to fix this if so!
Thank youThank you for the heads up. It seems like it's working now.
For everyone with this problem please thank AlbertoRuperto and follow these steps:
1. Restart your iPhone.
2. Open WhatsApp.
3. Enter your phone number.
4. Enter verification code (if you're a new member) or just click 'Next' if you're a returning user.
5. Done! All your contacts should be there and your chats (as long as you backed them up).
P.S. This only applies to people who redownloaded and are stuck on phone verification page. -
Connection attempt to firmware update server was unsuccessful.
I have successfully installed iTunes 10.5 onto my WIndows 7 64 bit laptop. Everything I have tried works, except for one thing.
When I try to install iOS5 onto my iPad 2, I can successfully download the file but shortly after it starts installing, it bombs out and gives an error 3259 and then deletes the iOS5 file so I have to download it again!!!!
I found the Diagnostics thing in iTunes and everything seems fine except the below (normally the activation server is fine when I run the diagnostics, but this time it failed):
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
I have tried the following:
1. Delete contents in hosts file
2. Deselect the certificate revocation checkbox
3. Checked SSL3.0 and TSL 1.0
4. Turned off my firewall
5. Added the whole Apple domain to the Exclude list on my anitvirus
6. Added all the iTunes/Apple/Bonjour folders in Program Files, Program Files (x386), Local, Local Low, Roaming and iTunes in My Music to the Exclude list on the antivirus
7. Tried to run the diagnostics on a second computer, with the same result
8. Switched my laptop over from my Wi-Fi/ADSL network to my phone hotspot network with the same result
9. There are one or two other things I have tried as well that I can't remember
I have spent about 4 hours searching the internet, changing settings, restarting etc etc etc and I am about to punch a hole in my iPad and go get an Android device
PLEASE, PLEASE, PLEASE can somebody tell me why this is happening and how I can fix itI have found a solution to the iOS5 upgrade that was being stopped by the above connection problem.
1. Unplug your iPad from your computer and plug it back in again
2. A message box will come up that asks if you want to download and install or just download the new iPad firmware.
3. Use the DOWNLOAD only option.
4. Once it has downloaded, click on your Device in iTunes and it should start to install automatically -
When trying to play itunes from my PC to my stereo connected to an Airport Express, I gen an error that says "An error occured while connecting to the Airplay device "Stereo" an unknown error occured (-15000)". This has happened before and for reasons unknown to me, the problem corrects itself, then it starts again/ Makes me wish I did not have my music on itunes.
moehadi, Welcome to the discussion area!
This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes".
Maybe you are looking for
-
How do you get the UDID number from your ipod if you don't have the ipod anymore. The apple store took it because it wasn't working so I can't plug it in to get the number. Some of my apps are associated wtih that number and I can't move them to my
-
I have had this LG Lucid for 1 1/2 years not been pleased with it from the start. I had recently not been able to download vids or pics from friends or family. So I called the lack of customer care center and he talked me into getting a NEW refurbish
-
Recursively Retrieving All the Files/Directories in a Directory
Hello, I want to retrieve all files in a directory, and ran into this sample code: www.ni.com/example/27157/en/ This is the function that does the retrieve action: GetFilesAndDirectories(). Its content is as follow: void GetFilesAndDirectories(char
-
LYNC 2013, Exchange 2013 / OWA presence not updating from calendar entries
Have a test environment of LYNC 2013 and EXCHANGE 2013. No software clients - pure OWA access. IM works within OWA and I can manually set availability which is seen correctly by other users. What does not happen is any calendar entries - they do not
-
Dynamic Split Join:Parallel flow using OSB
Hi, I am implementing a dynamic split join in OSB,where in the for -loop i am invoking a database adapter. If I select parallel='yes' in the for-loop settings, I get a random number of records from the database as an output. While on the other hand,