"Error Dialog: The server could not be contacted " when deploying web srvc

I have the J2EE 1.4 and Application Server 8 Q1 installed under windows. I have used all of the defaults on the install. The admin port is 4848. I want to install a web service on the http listener at 3345 (8080 was used and 3345 was substituted at installation time). I am getting the error from the deploytool when deploying the example web service "Hello". I am sure that the server is running and that the userid and password are the correct (I can log into the admin console with them). I've seen this error in other posts, but no solution. Does anyone have a solution to this???
Thanks in advance : )

yep, i get d same error on that, in fact, port 8000 is d default web service port, if i deploy the application via invalid port (eg. 4848 or 1234), i will get an error, say "cannot obtain a connected depolyment manager". but if i deploy that via 8000 (or 9191, it is also avaliable, casue i can connect to http://localhost:9191/ as default j2ee home page as well), i will get the error " the server could not be contected", and i m definitely sure that i can connect to console via 8000 and j2ee server is running by typing "j2ee -verbose" in command line.

Similar Messages

  • LS Getting the error "The data could not be saved because the server could not be contacted" when deploying on my local desktop

    Hi:
    I have a very simple test LS App:
    1 Table "Person" with 1 property "Name"
    One totally standard Editable Grid
    So no complicated calculations that could timed out...
    When I hit F5 the screen launches and shows the data, but when I try to create a new Person it waits for about 2 minutes and then the following error appears:
    The data could not be saved because the server could not be contacted. Please check your network connection and try saving again. The Operation timed out.
    Despite the error the data gets persisted on the database.
    I am on VS 2013 Pro Update 4 and SQL Server LocalDB 2012 (v11.0).

    If you decide to try again I would:
    1) Uninstall Visual Studio
    2) Uninstall SQL Server (all versions)
    3) Re-install SQL Server
    4) Re-Install Visual Studio
    Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
    http://LightSwitchHelpWebsite.com

  • HT4623 i have updated my i.phone 4 g  but after updating when i turned on my phone it was showing the sign to connect to i.tunes and when when i connected i.tunes showed error that the server could not be contacted.... so what i can do now to resolve the

    i have updated my ios 5 to 6 but when the updating aur dowloading has comleted and i turned on the phone it showed a sign to connect to the itunes and then i connecte to itunes but i.tunes showed error that the server could not be contacted....now what i can do to resolve the problem????

    has your phone been jailbroken?

  • HT201210 trying to update my iphone but it ends up giving me an error saying , the server could not be contacted or is unavailabe ????

    trying to update my iphone but it ends up giving me an error saying , the server could not be contacted or is unavailabe ????

    Restore the iPhone when connected to iTunes by cable.
    Still the same TS1275?
    Is your iPhone jailbroken?
    Or
    Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

  • ITunes keeps saying the server could not be contacted when trying to restore my iPhone 5

    I'm trying to restore my iPhone 5 using iTunes, because my battery life has greatly decreased, and I believe it to be a software problem. Therefore I'm wanting to wipe the software completely, and update it again, but when I hit restore, it extracts the software, and then tells me the update server could not be reached. I'm not sure what the problem is, I updated my iTunes again and retried but the same thing happened. Please let me know what to do to restore my phone

    Try restoring your iPhone from a different computer.
    kpower28
    Please mark this as "solved my problem" or "helped me"!

  • The data could not be saved because the server could not be contacted - Error

    Hello, I'm a beginner in ligthswitch, so, I made a couple of screens and I made the database and attach to the application but when i want to save the new records shows me this error:
    The data could not be saved because the server could not be contacted. Please check your network connection and try saving again.
    The operation has timed out.
    I verify the database, the record is saved but the application show me the error.
    Please help me I have to deliver this screens today.
    Thanks!
    Boanerges. Mr 3: 17

    Hi Elmer,
    I researched this error message, I think you can try the methods below:
    Increase the timeout of the connection between the client and the server
    Increase  Client timeout, and it is set in the Application class in the Client Project
    For further information: Error message: Unable to save data

  • HT1414 i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you

    i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you

    Thank you. No my phone hasnt been jailbroke, therefore I'll keep trying.

  • Error 2000 - The server is not compatible with this deployment client

    I'm getting an error trying to deploy a composite. It works for everyone else on the team, and our configurations are the same (as far as we can tell). We've compared JDev version info.
    Any idea what I can try? Thank you.
    [12:57:48 PM] ---- Deployment started. ----
    [12:57:48 PM] Target platform is (Weblogic 10.3).
    [12:57:48 PM] Running dependency analysis...
    [12:57:48 PM] Building...
    [12:58:05 PM] Deploying profile...
    [12:58:06 PM] Wrote Archive Module to C:\pkgs\svn\mdm\trunk\src\DRM WDK Source Code\Workflows\DrmRequestWorkflowSelection\deploy\sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    [12:58:06 PM] Deploying sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
    [12:58:06 PM] Processing sar=/C:/pkgs/svn/mdm/trunk/src/DRM WDK Source Code/Workflows/DrmRequestWorkflowSelection/deploy/sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    [12:58:06 PM] Adding sar file - C:\pkgs\svn\mdm\trunk\src\DRM WDK Source Code\Workflows\DrmRequestWorkflowSelection\deploy\sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    [12:58:06 PM] Preparing to send HTTP request for deployment
    [12:58:06 PM] Creating HTTP connection to host:10.22.2.40, port:8001
    [12:58:06 PM] Sending internal deployment descriptor
    [12:58:06 PM] Sending archive - sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    [12:58:07 PM] Error deploying archive sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
    *[12:58:07 PM] HTTP error code returned [2000]*
    *[12:58:07 PM] Error message from server:*
    The server is not compatible with this deployment client: please verify that the server is a SOA managed server and that its version is supported by this deployment client
    [12:58:07 PM] Check server log for more details.
    [12:58:07 PM] Error deploying archive sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
    [12:58:07 PM] #### Deployment incomplete. ####
    [12:58:07 PM] Error deploying archive file:/C:/pkgs/svn/mdm/trunk/src/DRM WDK Source Code/Workflows/DrmRequestWorkflowSelection/deploy/sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    Edited by: J Keller on Jun 6, 2013 8:03 AM

    Can anyone reply plz???

  • Trying to update iTunes but keep getting the error messag "the url could not be opened" when it's always worked fine in the past. What does this mean?

    Trying to update my iTunes but keep getting the error message "the URL could not be opened" what does this mean and how do I resolve this? It's always worked fine in the past!

    Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
    tt2

  • Get error message that server could not be found when sending email thru iPhoto

    I have established a icloud/mobile me account.  Trying to use iphoto to send photos with emails and always get error message that server coule not be found.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • My itunes store is saying that it could not contact the server, it says i need to restore my ipod but when i go to restore it, it says the server could not be contacted or something. what does this mean?

    okay so last night i went to charge my ipod in the computer and it started working then i took it out of the computer and put it on a wall charger and it had a spasm attack and shut itself down, after that it said i had to connect it to itunes so when i did it kept telling me that i need to restore my ipod, but when i press restore the itunes said "the contact server is not avalible" or something similar to that, what does that actually mean and is there anyway i can fix my ipod. i have dropped my ipod a few times, on tiles, wood, in a gutter of water when it fell out my pocket but im also wondering is it something to do with my ipod or is it itunes?

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    The abuse may prevent a restore or prevent proper operation of the iPod if you can restore the iPod.

  • Everytime I try to update my iPod, it comes up with a message saying the server could not be contacted.

    My ipod is the 4.3.5 version. It is driving me nuts! I have tried disabling different softwares, updating Itunes, and restarting my computer over and over. It says server cannot be contacted yet everytime I open iTunes, it pops up at least twice saying to update.

    Let's try the following document with that one.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    (If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

  • I receive "The iTunes update server could not be contacted" when trying to update through the Help Menue

    I am attempting to update itunes because my device iPhone 5 does not appear on the left side.  Can someone offer anything?

    Disable any antivirus or firewall hardware.

  • Error : The porlet could not be contacted

    Anybody knows why the browser (Netscape) sometime shows "Error : The portlet could not be contacted" when I am accessing the web using portal.
    Thanks so much.

    There is a timeout duration set in your apache config file. If that portal takes more that that time to come then it
    gets timed out

  • HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for

  • How do I create a personal Lync account?

    I don't know much about Lync...  My work uses Lync (the whole Office package), and as a result we are able to participate in Microsoft's Home Use Program, which gives me personal access to Office 2013, which includes Lync.  I'm trying to find a way t

  • How to get Current month last year sale in report

    HI,           I would like to compare the sale value of a  month for any year. ie sale of the march month for this year ,previous year and a year before ..like that at least for two years..ie current and prvious year. how can i get it done in query?

  • Java Version for PI 7.1

    Hi all, Can anyone please tell  me what is the exact recommended JRE version for PI 7.1 with enhancement package1. thanks in advance Jagruthi

  • Ix4-300D firmware update

    Hello Firt of all sorry for my english lollMy Nas works on 4.1.102.29716 firmware version.I want to update to 4.1.112.33292 but i is impossible. I checked to log of the nas and it says the fw is corrupted. Any advise?  

  • Assistance with a printer deployment policy

    Hello all, I would like to know if anyone has pointers on deploying printers through Group Policy. I have a policy located in Computer Configuration --> Preferences --> Printers  I currently have 2 printers I need to deploy to a group of machines wit