Error disable due to loopback

Hi,
We have a campus network. A student's hostel room port that is connected to a 2960 switch get error-disabled time and again and it shows the reason being "loopback".
From switch patch panel to user's LAN port in room , we have tested the connectivity through cable tester and it is found to be proper.
He has changed his LAN cable also, what can be the exact reasons causing this problem

Thanks for the output to the command "sh version".
Look at the uptime of the switch. Because of this the output to the "loopback_error_2960" is totally useless. Why? If there was any line errors which can determine if there was a cabling issue, a NIC card issue or something more sinister, then there's only 4-days worth of data. Not much to run with.
The IOS is very, very old.
Currently, the only thing I can think of is remove the configuration of setting the speed to the port to 10 Mbps. (I don't see the benefit of punishing students by slowing down their network speed.) Once the port is running auto speed/auto duplex, wait for approximately 30 minutes and run a TDR on the port. Even better if you can move the cable to the GigabitEthernet port and run the TDR there so you'll get a better picture of all the pairs.
Another thing, post the output to the command "sh post".

Similar Messages

Error-disabled cause by loopback?

Hello All,
Does anyone please explain me about error-disabled cause by loopback? What is loopback? When does it happen? And why?
Thank you very much,
Nitass

This happens usually with IP Phones using power over ethernet. Hope this link helps
http://www.cisco.com/en/US/products/hw/phones/ps379/products_field_notice09186a008031575e.shtml
Iam not sure of any other reasons though,

EEM on port error-disable due to UDLD

I would like to ask from the EEM community for some assistance in regards to crafting an EEM script for an ME-3800X. We have one or two appliances whereby the only uplink (TenGigabitEthernet0/1 and/or TenGigabitEthernet0/2) goes into error-disable and caused by UDLD. What I am looking for is a script to do the following:
1. If the ports TenGigabitEthernet0/1 and/or TenGigabitEthernet0/2 goes into error-disable caused by UDLD or link-flap then disable the port, wait for 5 seconds, enable the port;
2. Wait for 15 seconds and send an email.
I only want this EEM to work on the TenGigabitEthernet interfaces and I do not want the EEM script to do this on the access ports.
Error-disable recovery is a global option and there's no option to limit on a per-interface level.
Thank you in advance.

Thanks for responding, Joe.
We were not able to take down the error messages but I believe they error messages could be:
%UDLD-4-UDLD_PORT_DISABLED: UDLD disabled interface Te0/2, unidirectional link detected
%PM-4-ERR_DISABLE: udld error detected on Te0/2, putting Te0/2 in err-disable state
Could an EEM script be created when an error message or an event of "unidirectional link detected" occurs, do the following:
1. In privilege mode, issue the command "udld reset".
2. Wait for 30 seconds and then send an email.
Thanks for your assistance and support, Joe.

GPU: currently disabled due to an error (unsuported hardware/driver version)

I still have problems after the last update (ACR 9).
There is a note - GPU: currently disabled due to an error (unsupported hardware/driver version).
I use AMD FirePro V4800 that is in the list of Adobe - Photoshop CC and CC 2014 GPU FAQ , as followed
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
nVidia GeForce: 400, 500, 600, 700 series
nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
nVidia GRID K1, K2
AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
AMD/ATI FireGL: W5000, W7000, W8000
Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
I installed the latest driver from AMD site - Workstation
So, my system has the latest driver now
The release notes of the driver say that now my video-card supports
DirectX ® - 11
OpenGL - 4.3
OpenCL™ - 1.2
What could be wrong? And what should I do?
PS Photoshop also works strange: some of plug-ins (for example, by Nik Software) show a white window in the place where the picture should be.
Should I buy Nvidia Quadro K4200? But is was not in my plans at the moment when I did the last upgrade of Camera Raw.

Hello,
First, please consult the Camera Raw GPU FAQ for specific troubleshooting tips.
https://helpx.adobe.com/photoshop/kb/acr-gpu-faq.html#Suggested%20System%20Requirements%20 &%20Graphics%20Cards
You may need to completely uninstall/reinstall the drivers for your AMD card. Please consult the manufacturer's support site for the uninstall/reinstall procedures.
Hope that helps,
- Chris

: %COMMON_FIB-4-DISABLING: IPv4 CEF is being disabled due to a fatal error: %COMMON_FIB-4-DISABLING: IPv4 CEF is being disabled due to a fatal error

Am running ASR1001 router as LNS and suddnly i see the following error on the monitor
: %COMMON_FIB-4-DISABLING: IPv4 CEF is being disabled due to a fatal error
any idea????

Hi kashalo84,
It normally happens due to low memory and that can be caused due to full internet routing table. Please provide output of
- show memory stats
- show ip route summary
- show ip bgp summary
Regards,
Akash

HT1212 How I restore iPod touch disabled due to pass code error .know i know the pass code

how i restore the disabled i pod due to passcode error

Not knowing what you mean by passcode error:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HT201442 ipad4 is disabled due 2 unknown passcode and itunes will download software but wont install. saying error -39 cant communicate with ipad. im so frustrated

i have been trying forever 2 restore my ipad in itunes as its disabled due 2 unknown passcode. but when it goes 2 download software it says it cant communicate with ipad. please help

Try the following:
1. Restore:
http://support.apple.com/kb/HT1414
2. Recovery:
http://support.apple.com/kb/HT1808

"3D Functionality currently disabled due to OpenGL being disabled"

Hi guys I need help,
I'm trying to work on photoshop CC but everytime I try to work in 3D mode I get the error message "3D Functionality currently disabled due to OpenGL being disabled".
-I've updated my drivers
-Installed windows updates
-Restarted my system
System Info:
Adobe Photoshop Version: 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 2
Processor speed: 1596 MHz
Built-in memory: 5996 MB
Free memory: 2686 MB
Memory available to Photoshop: 5142 MB
Memory used by Photoshop: 100 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=0
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2172
glgpu[0].GLName="Intel(R) HD Graphics"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=0
glgpu[0].GLDriverVersion="9.17.10.4101"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics"
glgpu[0].GLRendererID=0
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd 32"
glgpu[0].GLDriverDate="20150130000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Intel Build 9.17.10.4101"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
License Type: Subscription
Serial number: 90970388128582100055
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Natalie\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 684.5G, 433.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2014/08/12-23:42:09   79.557478   79.557478
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdbePM.dll   PatchMatch 2014/09/07-21:07:38   79.558079   79.558079
   AdobeLinguistic.dll   Adobe Linguisitc Library   8.0.0
   AdobeOwl.dll   Adobe Owl   5.2.4
   AdobePDFL.dll   PDFL 2014/08/18-15:13:12   79.512424   79.512424
   AdobePIP.dll   Adobe Product Improvement Program   7.2.1.3399
   AdobeXMP.dll   Adobe XMP Core 2014/08/20-09:53:02   79.156797   79.156797
   AdobeXMPFiles.dll   Adobe XMP Files 2014/08/20-09:53:02   79.156797   79.156797
   AdobeXMPScript.dll   Adobe XMP Script 2014/08/20-09:53:02   79.156797   79.156797
   adobe_caps.dll   Adobe CAPS   8,0,0,13
   AGM.dll   AGM 2014/08/12-23:42:09   79.557478   79.557478
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   amtlib.dll   AMTLib (64 Bit)   8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34)   1.000000
   ARE.dll   ARE 2014/08/12-23:42:09   79.557478   79.557478
   AXE8SharedExpat.dll   AXE8SharedExpat 2013/12/20-21:40:29   79.551013   79.551013
   AXEDOMCore.dll   AXEDOMCore 2013/12/20-21:40:29   79.551013   79.551013
   Bib.dll   BIB 2014/08/12-23:42:09   79.557478   79.557478
   BIBUtils.dll   BIBUtils 2014/08/12-23:42:09   79.557478   79.557478
   boost_date_time.dll   photoshopdva   8.0.0
   boost_signals.dll   photoshopdva   8.0.0
   boost_system.dll   photoshopdva   8.0.0
   boost_threads.dll   photoshopdva   8.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.2.6.32411   2.2.6.32411
   CITThreading.dll   Adobe CITThreading   2.2.6.32411   2.2.6.32411
   CoolType.dll   CoolType 2014/08/12-23:42:09   79.557478   79.557478
   dvaaudiodevice.dll   photoshopdva   8.0.0
   dvacore.dll   photoshopdva   8.0.0
   dvamarshal.dll   photoshopdva   8.0.0
   dvamediatypes.dll   photoshopdva   8.0.0
   dvametadata.dll   photoshopdva   8.0.0
   dvametadataapi.dll   photoshopdva   8.0.0
   dvametadataui.dll   photoshopdva   8.0.0
   dvaplayer.dll   photoshopdva   8.0.0
   dvatransport.dll   photoshopdva   8.0.0
   dvaui.dll   photoshopdva   8.0.0
   dvaunittesting.dll   photoshopdva   8.0.0
   dynamiclink.dll   photoshopdva   8.0.0
   ExtendScript.dll   ExtendScript 2014/01/21-23:58:55   79.551519   79.551519
   icucnv40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
   icudt40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
   igestep30.dll   IGES Reader   9.3.0.113
   imslib.dll   IMSLib DLL   7.0.0.154
   JP2KLib.dll   JP2KLib 2014/06/28-00:28:27   79.254012   79.254012
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OpenMP* Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   7.2.1.3399
   mediacoreif.dll   photoshopdva   8.0.0
   MPS.dll   MPS 2014/08/18-23:43:19   79.557676   79.557676
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC 2014   15.2.2
   Plugin.dll   Adobe Photoshop CC 2014   15.2.2
   PlugPlugExternalObject.dll   Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit)   5.0.0
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   5.2.0.54
   PSArt.dll   Adobe Photoshop CC 2014   15.2.2
   PSViews.dll   Adobe Photoshop CC 2014   15.2.2
   SCCore.dll   ScCore 2014/01/21-23:58:55   79.551519   79.551519
   ScriptUIFlex.dll   ScriptUIFlex 2014/01/20-22:42:05   79.550992   79.550992
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   8.0.0.14
   VulcanControl.dll   Vulcan Application Control Library   5.0.0.82
   VulcanMessage5.dll   Vulcan Message Library   5.0.0.82
   WRServices.dll   WRServices Fri Mar 07 2014 15:33:10   Build 0.20204   0.20204
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 15.2.2 (2014.2.2 x001 x003)
   Accented Edges 15.2.2
   Adaptive Wide Angle 15.2.2
   Angled Strokes 15.2.2
   Average 15.2.2 (2014.2.2 x001 x003)
   Bas Relief 15.2.2
   BMP 15.2.2
   Camera Raw 8.7.1
   Camera Raw Filter 8.7.1
   Chalk & Charcoal 15.2.2
   Charcoal 15.2.2
   Chrome 15.2.2
   Cineon 15.2.2 (2014.2.2 x001 x003)
   Clouds 15.2.2 (2014.2.2 x001 x003)
   Collada 15.2.2 (2014.2.2 x001 x003)
   Color Halftone 15.2.2
   Colored Pencil 15.2.2
   CompuServe GIF 15.2.2
   Conté Crayon 15.2.2
   Craquelure 15.2.2
   Crop and Straighten Photos 15.2.2 (2014.2.2 x001 x003)
   Crop and Straighten Photos Filter 15.2.2
   Crosshatch 15.2.2
   Crystallize 15.2.2
   Cutout 15.2.2
   Dark Strokes 15.2.2
   De-Interlace 15.2.2
   Dicom 15.2.2
   Difference Clouds 15.2.2 (2014.2.2 x001 x003)
   Diffuse Glow 15.2.2
   Displace 15.2.2
   Dry Brush 15.2.2
   Eazel Acquire 15.2.2 (2014.2.2 x001 x003)
   Embed Watermark 4.0
   Entropy 15.2.2 (2014.2.2 x001 x003)
   Export Color Lookup Tables NO VERSION
   Extrude 15.2.2
   FastCore Routines 15.2.2 (2014.2.2 x001 x003)
   Fibers 15.2.2
   Film Grain 15.2.2
   Filter Gallery 15.2.2
   Flash 3D 15.2.2 (2014.2.2 x001 x003)
   Fresco 15.2.2
   Glass 15.2.2
   Glowing Edges 15.2.2
   Google Earth 4 15.2.2 (2014.2.2 x001 x003)
   Grain 15.2.2
   Graphic Pen 15.2.2
   Halftone Pattern 15.2.2
   HDRMergeUI 15.2.2
   HSB/HSL 15.2.2
   IFF Format 15.2.2
   IGES 15.2.2 (2014.2.2 x001 x003)
   Ink Outlines 15.2.2
   JPEG 2000 15.2.2
   Kurtosis 15.2.2 (2014.2.2 x001 x003)
   Lens Blur 15.2.2
   Lens Correction 15.2.2
   Lens Flare 15.2.2
   Liquify 15.2.2
   Matlab Operation 15.2.2 (2014.2.2 x001 x003)
   Maximum 15.2.2 (2014.2.2 x001 x003)
   Mean 15.2.2 (2014.2.2 x001 x003)
   Measurement Core 15.2.2 (2014.2.2 x001 x003)
   Median 15.2.2 (2014.2.2 x001 x003)
   Mezzotint 15.2.2
   Minimum 15.2.2 (2014.2.2 x001 x003)
   MMXCore Routines 15.2.2 (2014.2.2 x001 x003)
   Mosaic Tiles 15.2.2
   Multiprocessor Support 15.2.2 (2014.2.2 x001 x003)
   Neon Glow 15.2.2
   Note Paper 15.2.2
   NTSC Colors 15.2.2 (2014.2.2 x001 x003)
   Ocean Ripple 15.2.2
   OpenEXR 15.2.2
   Paint Daubs 15.2.2
   Palette Knife 15.2.2
   Patchwork 15.2.2
   Paths to Illustrator 15.2.2
   PCX 15.2.2 (2014.2.2 x001 x003)
   Photocopy 15.2.2
   Photoshop 3D Engine 15.2.2 (2014.2.2 x001 x003)
   Photoshop Touch 14.0
   Picture Package Filter 15.2.2 (2014.2.2 x001 x003)
   Pinch 15.2.2
   Pixar 15.2.2 (2014.2.2 x001 x003)
   Plaster 15.2.2
   Plastic Wrap 15.2.2
   PLY 15.2.2 (2014.2.2 x001 x003)
   PNG 15.2.2
   Pointillize 15.2.2
   Polar Coordinates 15.2.2
   Portable Bit Map 15.2.2 (2014.2.2 x001 x003)
   Poster Edges 15.2.2
   PRC 15.2.2 (2014.2.2 x001 x003)
   Radial Blur 15.2.2
   Radiance 15.2.2 (2014.2.2 x001 x003)
   Range 15.2.2 (2014.2.2 x001 x003)
   Read Watermark 4.0
   Render Color Lookup Grid NO VERSION
   Reticulation 15.2.2
   Ripple 15.2.2
   Rough Pastels 15.2.2
   Save for Web 15.2.2
   ScriptingSupport 15.2.2
   Shake Reduction 15.2.2
   Shear 15.2.2
   Skewness 15.2.2 (2014.2.2 x001 x003)
   Smart Blur 15.2.2
   Smudge Stick 15.2.2
   Solarize 15.2.2 (2014.2.2 x001 x003)
   Spatter 15.2.2
   Spherize 15.2.2
   Sponge 15.2.2
   Sprayed Strokes 15.2.2
   Stained Glass 15.2.2
   Stamp 15.2.2
   Standard Deviation 15.2.2 (2014.2.2 x001 x003)
   STL 15.2.2 (2014.2.2 x001 x003)
   Sumi-e 15.2.2
   Summation 15.2.2 (2014.2.2 x001 x003)
   Targa 15.2.2
   Texturizer 15.2.2
   Tiles 15.2.2
   Torn Edges 15.2.2
   Twirl 15.2.2
   U3D 15.2.2 (2014.2.2 x001 x003)
   Underpainting 15.2.2
   Vanishing Point 15.2.2
   Variance 15.2.2 (2014.2.2 x001 x003)
   Virtual Reality Modeling Language | VRML 15.2.2 (2014.2.2 x001 x003)
   Water Paper 15.2.2
   Watercolor 15.2.2
   Wave 15.2.2
   Wavefront|OBJ 15.2.2 (2014.2.2 x001 x003)
   WIA Support 15.2.2 (2014.2.2 x001 x003)
   Wind 15.2.2
   Wireless Bitmap 15.2.2 (2014.2.2 x001 x003)
   ZigZag 15.2.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Libraries
   Adobe Color Themes
Installed TWAIN devices: NONE

You system info does not show GPU disabled it shows
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
and you intel HD Graphic has the required video memory the driver date is quite new end of january.
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2172
glgpu[0].GLName="Intel(R) HD Graphics"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=0
glgpu[0].GLDriverVersion="9.17.10.4101"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics"
glgpu[0].GLRendererID=0
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd 32"
glgpu[0].GLDriverDate="20150130000000.000000-000"
also CC 2014 is upddates
Adobe Photoshop Version: 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64
you display also meets requirements
Display Bounds: top=0, left=0, bottom=768, right=1366

Idle power management features on processor disabled due to a firmware problem - after BIOS update

Hi,
I did a BIOS upgrade on my E20 - 4220-CTO to 5JKT55A and I started seeing these messages in my System Event log ->
"Idle power management features on processor 0 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
"Idle power management features on processor 1 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
"Idle power management features on processor 2 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
"Idle power management features on processor 3 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
The messages occur on each reboot.
I upgraded to the latest bios 5JKT56A and I get the same messages.
I was not getting these error messages on BIOS level 5JKT47A(ship from lenovo with this level).
I updated my BIOS as it was suggested on the lenovo site before doing the win7 SP1 update. Note - I got the error before and after the SP1 update so it's not related to SP1.
I have not see any additional issues, just the messages in the event log on each boot.
Any ideas?
Thanks in Advance!

5JKT58A is the current E20 BIOS. have you tried it yet?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74761
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Vfc error disabled because of Ethernet port down?

We are building a new datacenter and is starting to set up the SAN.
This small DC consist of 2 Nexus 5596UP, a Compellent SAN and 2 Dell M1000e cassis with blade servers.
naive FC part in Nexus has been easy to set up but we have problems with the FCOE setup.
Since the blades are not installed yet none of the Ethernet ports are up. As soon as we bind an ethernet port to a vfc the vfc goes to error disable with this message:
%PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 1900%$ Interface vfc101 is down (Error disabled)
Config snippets:
vlan 1900
fcoe vsan 1900
name VSAN-A-FCOE
vlan 1901
name VSAN-B-FCOE
vsan database
vsan 1900 name "VSAN-A"
vsan 1901 name "VSAN-B"
interface vfc101
bind interface Ethernet1/1
no shutdown
vsan database
vsan 1900 interface vfc101
vsan 1900 interface fc2/13
vsan 1900 interface fc2/14
vsan 1900 interface fc2/15
vsan 1900 interface fc2/16
interface Ethernet1/1
switchport mode trunk
spanning-tree port type edge trunk
vlan 1900
fcoe vsan 1900
name VSAN-A-FCOE
vlan 1901
name VSAN-B-FCOE
vsan database
vsan 1900 name "VSAN-A"
vsan 1901 name "VSAN-B"
vsan database
vsan 1900 interface vfc101
vsan 1900 interface fc2/13
vsan 1900 interface fc2/14
vsan 1900 interface fc2/15
vsan 1900 interface fc2/16
interface vfc101
bind interface Ethernet1/1
no shutdown
interface Ethernet1/1
switchport mode trunk
spanning-tree port type edge trunk
Do the vfc go error disable because the ethernet interface being down? I was under the impression it should just go "down"

What you are seeing is normal.. Here are outputs from my lab switch where I shut Eth1/20 which is tied to vFC 20
24.10.5020A.1(config)# int ethernet 1/20
24.10.5020A.1(config-if)# shut
2011 Oct 21 10:16:01 24 %ETHPORT-5-IF_DOWN_CFG_CHANGE: Interface Ethernet1/20 is down(Config change)
2011 Oct 21 10:16:01 24 %FLOGI-5-MSG_PORT_LOGGED_OUT: %$VSAN 100%$ [VSAN 100, Interface vfc20: mode[TF]] Nx Port 21:00:00:c0:dd:12:0e:35 logged OUT.
2011 Oct 21 10:16:01 24 %PORT-5-IF_PORT_QUIESCE_FAILED: Interface vfc20 port quiesce failed due to failure reason: Epp Not Supported by Peer (0x19d)
2011 Oct 21 10:16:01 24 %PORT-5-IF_DOWN_NONE: %$VSAN 100%$ Interface vfc20 is down (None)
2011 Oct 21 10:16:01 24 %PORT-2-IF_DOWN_ERROR_DISABLED: %$VSAN 100%$ Interface vfc20 is down (Error disabled)
2011 Oct 21 10:16:02 24 %ETHPORT-5-IF_DOWN_ADMIN_DOWN: Interface Ethernet1/20 is down (Administratively down)
24.10.5020A.1(config-if)#

Error disabled ports

I have a 3550 switch that gets a error-disabled copper ports. There is no errors ont the port. What else would cause it to be disabled?

Although there is no error on the port , there should be an error message in the log that should tell you the reason why the port got error disabled like port security violation , loopback detection , etherchannel misconfig etc.
You can enable errordisable recovery for all different causes by setting a timer. What happens is once this timer expires , the port is brough out of error dsiabled state.
Here are some of the useful commands.
D-C3550-2A(config)#errdisable ?
detect Error disable detection
recovery Error disable recovery
D-C3550-2A(config)#errdisable recovery ?
cause Enable error disable recovery for application
interval Error disable recovery timer value
Hope this helps.
Salman Z.

HT4623 My i phone was disabled due to "security" reasons. I reset my password, got confirmation, but I still get the message on my i phone and cannot update or purchase Apps.

I woke up one morning and my i phone had a message for me: "your account is disabled due to security reasons". I follow the instructions to establish a new ID and password. It was confirmed on the i Phone, but when I try to download apps. or get updates it will not accept my ID/password which I have reset half a dozen times already.
On the flip side, I can log on my MacBook Pro without any problems. Same ID/password combo.
Technicians haven't been able to get this resolved. Any advice is highly appreciated.
Maux47

This Apple Help page provides contact information for various countries for security problems with an Apple ID:
http://support.apple.com/en-us/HT5699

TS3682 I have tried to restore me iPod that is disabled due to typing in the wrong password too many times. iTunes keeps giving me a box saying that it can't connect because I need to type in the passcode on the iPod (which I can't) what do I do now?

I have followed the steps provided by apple to restore an iPod touch. It is disabled due to having the wrong password entered too many times. When I get part way through the restore process on my computer it pops up a box saying that it can't restore until I enter the passcode into the iPod. I have tried this same process over 5 times now and keep gutting the same results. It is my kids iPod and he has only had it since September. Someone please help me before I throw the thing through the window and my kid strangles me!!! Thanks!

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HT203512 I cannot sign into my iCloud account. It keeps saying your apple ID has been disabled due to security reasons, kindly reset your password. I have already changed the password twice but still Im not getting access.

Hi, I am unable to sign in to my iCloud account. When i sign in, it says Your apple ID has been disabled due to security reasons. Kindly reset your password to log in. I have already reset my password thrice but am unable to access into my account even after using the reset new passwords. Can someone help me. This unfortunately is my primary email account and Im unable to access any of my emails

This Apple Help page provides contact information for various countries for security problems with an Apple ID:
http://support.apple.com/en-us/HT5699

I had my Itunes account disabled due to fraud, if i create a new itunes account how can i switch purchases and apps to the new ID?

i had my Itunes account disabled due to fraud, if i create a new itunes account how can i switch purchases and apps to the new ID?

Hi ...
Just be cause the account was disabled (Apple ID) doesn't mean you can't reset the password and have access to your iTunes purchases.
Use the iforgot link to reset your password > Apple ID: "This Apple ID has been disabled for security reasons" alert appears
If you have problems resetting, use the email form here > Apple - Support - iTunes Store - Contact Us
edited by: cs

Error disable due to loopback

Similar Messages

Maybe you are looking for