Error display line items

Hi Gurus,
please help me on this error.. what to do?
No line item display possible for account 41000010 1000
Message no. F4430
Diagnosis
You have determined that displaying line items is not to be possible for G/L account 41000010 in company code 1000.
Procedure
It is presumably a clearing account (incoming check account, GR/IR clearing account) which has its own reports for analysis.

Hi,
Intally GOTO FS00 and tick the line item display and then GOTO SE38 and give program RFSEPA01 and execute .
then GIVE co code and GL account number
Documemt 1-999999999
hope this solve your problem
regards,
Santosh kumar

Similar Messages

  • Problem in display line items in FS10N

    Hi all,
               I have checked ,check box in G/L account  "Line items display "  in FS00 in current period ( 4 / 2014 )after that line items get displayed in FS10N for this period .
    There is problem in displaying line items for same  G/L account with previous all periods such as 3/2014,2/2014,1/2014.
    I have tried report "RFSEPA01" it works fine if we enter document number for selection with other parameters ,but it gives error if we run report with just Company code and G/L account .
    Please provide any other way to get item details for previous periods or is there any update on report "RFSEPA01".
    Please let me know why this issue occurred, if we activated the line item display for the particular G/L account in between the Posting period
    Thanks,

    Hi,
    You can check below two programs
    RFSEPA01 - for line item display
    RFSEPA02 - for open item display
    Steps to follow:
    1. Block the G/L account from posting
    2. Run both programs
    3. Unblock the G/L account
    this will make the earlier posted items visible.
    Regards,
    Jyoti

  • How to display line items twice in a single page in sap script

    HI,
      I am working on check printing. I copied the standard driver program and form to Zprogram and ZForm. Which are RFFOUS_C(print program) and F110_PRENUM_CHECK(Form Name).
    I want to display the line items twice in the same page and sub sequent pages.
    Currently I am able to display line items only once.
    Example:
    PAGE1.
    line item1
    line item2
    line item3
    line item4
    line item5
    line item1
    line item2
    line item3
    line item4
    line item5
    line items 1 to 5 which are in main window.
    How to achive this problem.
    Regards,
    vinod

    Hi
    I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
    If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more. 
    Best regards
    JD

  • Error - Balancing Line Item Profit Center not filled in Line Item 007

    Hi
    I am trying to do a transfer posting from one vendor account to another. However, system is giving an error - Balancing Line Item Profit Center not filled in line Item 001. Pls suggest.
    Regards
    Vaibhav

    hi  vaibhav
    you go through this Tcode  FAGL3KEH  and maintain default profit centre. in the  error message system shown GL accounts
    hope you userstand
    thanks
    dharmendar

  • Displaying line items, although not activated in FS00

    Hi everyone!
    I've got a question about line items.
    I had created a GL account, and in it's master record I didn't activated Display line item. But, when I call transaction for displaying GL account's line items (FAGLL03), I can see line items?
    How is that possible?
    I know that there are some special cases, for example expense accounts: for every expense account there is a cost element in CO, and no matter settings in FS00, for expense account there is always line item display. Similary, reconciliation accounts always have open items management, irrespective of settings in FS00.
    But this is just regular account, with very few settings in master record: its balance sheet account, the account currency is local currency, sort key 001 and field status group G001. And that's all.
    Can somebody explaine this?

    Guys. In addition to above my problem.  I was facing this problem due to some graphics issue on my laptop. I was not able to see most of the fields because of Graphics Driver installed on my laptop. ( Later on I got this solution. ).
    This seems very unrealistic to hear but my experience is true.
    I hope in future if some one will have this issue please check out driver compatibility specially Graphics. This problem may suppose to encounter with Dell. 
    Anyways Z layout also worked fine as suggested by Guest FICO.
    Thank you all.
    Regards,
    Sharvari Joshi.

  • Display line items in Cells of a table- Smartform

    Hello All,
    Can any one help me achieving  the below requirement.
    I have a requirement of printing invoice with a smartform. I am displaying line items from a TABLE node by looping VBRP's internal table. There are 12 cells and the 5 th cell contains a number of Dicount rates.
    I am displaying these discount rates from LOOP node by looping KONV's internal table within that CELL. The 7 th Cell has got 2 values which are required to be: one aligned to the TOP right corner of the cell and the other to the bottom right side of the cell.
    Now the issue description is:
    CELL-5:  Contains unknown number of values for display within the cell to be positioned as MIDDLE justified for an item(POSNR) of the main item table.
    CELL-7: Contains two fixed values :KWERT to be at Top right of the CELL-7and NETWR at the bottom right of CELL-7
    I have managed to display the sub items in CELL-5 in the middle  by giving values to SPACE BEFORE/SPACE AFTER sections of PARAGRAPH FORMAT in SMART STYLE.
    Requirement: Irrespective of number of sub items in CELL-5 the 2 values in CELL- 7 to be aligned as one at the top right and the other  to the bottom right cell flexibly . Same applies to other items(POSNR) of MAIN VBRP item table.
    The ROWS of the MAIN Table to be flexible enough to shrink the space when then are less number of subitems in   CELL-5.
    Values in Cell-7  should be adjusted according to contents in CELL-5.
    Thanks in advance for your valuable suggestions.

    Hi,
    Do one thing while filling the 5th cell , count the number of values(counter) in it for each record and fill new internal table (Itab_cell7) as follws.
    DATA : FLAG,
    counter1 type n.
    DO COUNTER TIMES.
    counter1 = counter1 + 1.
      CLEAR FLAG.
    IF counter = 1.
        WA_CELL7-VALUE = KWERT.
        APPEND WA_CELL7 TO ITAB_CELL7.
        FLAG = 'X'.
    ENDIF.
    IF counter1 =  (counter1 - 1).
        WA_CELL7-VALUE = KWERT.
        APPEND WA_CELL7 TO ITAB_CELL7.
        FLAG = 'X'.
    EXIT.
    ENDIF.
      IF FLAG NE 'X'.
      WA_CELL7-VALUE = ''.
      APPEND WA_CELL7 TO ITAB_CELL7.
    ENDIF.
    ENDDO.
    Adjust the code if need as per your data.
    In cell 7 under loop node print ITAB_CELL7 values in a text. and prepare a paragragh for alingment.
    if it does not work for send me the XML file for your smartform.
    Regards,
    Antim

  • Not able to display line item 20 in contract

    I could not able to display line item 20 in the contract document.
    line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
    MRS

    It may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
    Then system will show as like this

  • Display Line Items - Define Line Layouts?

    I cannot understand what  Define Line Layouts means in SPRO.
    Financial Accounting -> General Ledger Accounting -> Line Items -> Display Line Items -> Define Line Layouts
    I can see that there is some Line Layout Variant (D0,D1D2...), with some Fields, but i cannot understand where this fields or Line Layout Variants are used, in what transactions i can see changes if a made some. This variant reflects line layouts when i post something (f-02, ,f-03, f-04, f-51...) or when i want to see account items or balances ???.

    Hi,
    You can use these line layouts in the display of line items in various transactions and you can default a particular line layout for a user master, so that by default the line items comes in that layout for that user.
    Go to FB00 > Doc Display tab and there you can assign the line layout
    And then when you see the doucment say in FB03, you will see the line items in that format.
    Regards,
    SDNer

  • Display line items not possible!

    Hello
    I've a very strange situation on the productive system:
    I have a company code that registers and display account line items, while the second cannot display them, even if I've configurated the same aspects in account fields for the two company codes. That means they have the same
    - flag on display line items  AND
    - sort key  001 - POSTING DATE
    why??
    thanks a lot in advance,
    Chiara

    No, the answer was not that one, but thanks anyway.
    Finally I found the answer in
    Forum:  Message MSITEM033 in New GL - Cannot Display GL Line Items
    note OSS:
    -  1323960   Incorrect entry '/' in SKB1-XLGCLR and BSEG-XLGCLR
    -  1149500  Clearing open items by batch input selection
    -  1437341   Note 1437341 - Correction of BSEG/Index tables after note 1323960
    regards,
    Chiara

  • Depreciation not displaying line items

    hi all,
    While running depreciation run in test mode no line items are displayed and no errors are there if we see error log what could be the reason plz. tell me and in if run in real mode the values are posted but books are not updated plz. help me

    hi
    please check whether you have run the correct period for the fiscal year.

  • How to display line items corresponding to Header  adobe form

    Hi ,
    As I am new to Adobe Form, So struggling with below problem related with Adobe Form.
    For example, I have data in an internal table :
    Stage      item
    100         A
    100         B
    100         C
    200         D
    200         E
    Here you have for field 'Stage'  value '100' , I have 3 line items, for value '200' , it is 2 line items and so on.
    My requirement is , I have to show Stage field at top and corresponding line items should be displayed in table.
    Stage: 100
    item
    A
    B
    C
    Stage: 200
    D
    E
    I have used Nested table concept to achieve it but didn't get expected output.
    Please help me out.

    Hi,
         If all of your line items are getting displayed in different pages, to my knowledge, there may be two possibilities.
    1) May be the size of the main window can accomodate only one line item. If one item data fills up the window, then there wont' be any space for the next line item data to be accomodated in the same window in the same page, so, the system triggers the next page. Like-wise for each item data. If this is the case, increase the height of the main window to display items in same page.
    2) Check the driver program. Find the Write_form block, which is written inside an item loop. May be there is a Form-control Function module( Control_form with parameter 'NEW-PAGE' ) being called after the write_fom block, within the loop. If this is the case, remove the control_form FM section to make the data display in same page.
    Best Regards,
    Kumaar.S

  • Sapscript help -displaying line items in the table

    Hi folks,
    Can anyone please help me in a way of displaying the line items at the right place in the table fields?I have been playing with the tabs to space it for quite sometime. I tried everypossible combination, but does not work. Tring to figure out have not succeeded yet.
    the line items in some lines displaying right, but if the first name or the last name is long, either pushes  forward the subsequesnt data or if the length is small, it pulls the data inside.
    I do not know how to fix this.
    Here are the 4 elements I tried to display  as line items
    BOX XPOS 0 MM YPOS 0 MM WIDTH 10 MM HEIGHT 100 MM FRAME 10 TW
    BOX XPOS 10 MM YPOS 0 MM WIDTH 50 MM HEIGHT 100 MM FRAME 10 TW
    BOX XPOS 60 MM  YPOS 0 MM WIDTH 50 MM HEIGHT 100 MM FRAME 10 TW
    BOX XPOS 110 MM  YPOS 0 MM WIDTH 28 MM HEIGHT 100 MM FRAME 10 TW
    &OUT-SLNO&,,&OUT-EFNAME&,,,,,,&OUT-ELNAME&,,,,,,&OUT-EDOB&
    paragraph format
    tab1: 15 MM LEFT
    tab2: 22MM LEFT
    tab3: 24 MM LEFT
    tab4: 28 MM LEFT
    Any help is widely appreciated,
    Thanks,
    Sk

    If it is a form to be newly developed, it is better to go in for Smartform development since smartforms will automatically handle this problem.
    If you still want to continue using Scripts try to use
    /:  YORGIN
    or
    /: XORIGIN to adjust the height of the Box, if needed.
    More Details : http://help.sap.com/saphelp_47x200/helpdata/en/d1/803293454211d189710000e8322d00/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/d1/802edf454211d189710000e8322d00/frameset.htm
    For the problem regarding length of the names, try to split the name and show it on two lines
    eg., wrk_name+0(20)   on the first line
    and  wrk_name+20(20) on the second line
    Regards,
    Anish Thomas

  • To display line item text in FBL3N as it is displayed in FBL1N

    Hi Experts,
    Though the subject line presumes it to be a redundantly asked question but I could not comprehend the exact solution of this. So posting my entire scenario in a hope to get an effective response.
    Scenario: -
    We are not able to see the text when we run GL account balances. The text is maintained in the field text (in Basic data) and PO text (in fields PO Reference) . Now when you use transaction FBL1N to see vendor Open items, you can see the text (line item text) but the same is not seen when we run FBL3N (GL Account Line Items).
    In Technical (simpler) terms: -
    When we display an invoice using MIR4 say invoice number is 123456 (Vendor - 4567, GL account - 78946) , we can see line item text maintained there in field "Text" in Basic data tab. Now run transaction FBL1N for vendor 4567, text (BSEG-SGTXT)  is displayed in line item text. But when we run FBL3N text (BSEG-SGTXT) is not seen.
    How to display the line item text in FBL3N as well ?? In my initial manouver of SDN forum, i found solutions like BTE and pointers to substitutions. Kindly let me know a probable solution.
    Thanks a lot in advance.
    ~
    Shreya

    Hi,
    program RFITEMGL calls fm FI_ITEMS_DISPLAY thus:
      call function 'FI_ITEMS_DISPLAY'
        exporting
          caller_repid  = c_repid_gl
          acctype       = c_koart_gl
          x_opvw        = x_gl_opvw
          x_change      = x_change
          i_u_save      = gd_alvsave
          is_u_variant  = gs_variant
          it_u_fieldcat = gt_fieldcat[]
          it_kontab     = it_accts[]
          it_slbtab     = it_comps[]
          it_t001       = it_h_t001[]
          it_skat       = it_h_skat[]
          it_skb1       = it_h_skb1[]
          x_grid        = x_grid
          x_inet        = pa_inet
        tables
          it_items      = it_pos.
    where c_koart_gl     like bseg-koart  value 'S'.
    BSEG-SGTXT has value when BSEG-KOART = 'K' and this might be the reason why it is not displayed.
    It seems the report only displays records with BSEG-KOART = 'S'.
    Best regards.

  • Displaying line item details in smartform

    Hi,
    I need to display tax details of each line item in a smartform in the given format. Tax details should get displayed only if it present. Please tell me how to do this.
    for ex:
    item     description     qty         price   
    10       ytfytfyf             20          30
    VAT:2%
    Service Tax: 3%
    20        rwedw             30         10
    VAT:3%
    service tax:4%
    Thanks.

    hi,
    Under the loop node after displaying
    item description qty price
    10 ytfytfyf 20 30
    create another loop node of table tax information under the main loop with condition that is having same field in common... then create text elements  to display the following data
    VAT:2%
    Service Tax: 3%
    regards
    padma

  • Display line items of the data into next page in case of overflow

    Hi all,
    In my requirement i am displaying header data with its line items  through smart forms ( Landscape format).Since i am using landscape format main window size is less.Hence, In case of overflow of data
    the line items only should get displayed in the next page without the header information.
    I have given next page as Second page and i kept only  main window in the next page. But still it is displaying header information in the next page in case of overflow of data.
    Thanks in Advance
    Regards,
    Bhanu.R

    Hi Bhanu,
    In this case you can go for any one of the below 2 solutions.
    1) Try to use a seperate window(secondary window) for header information and for line items use main window. In second page use only main window. So, when the data overflows you will get only the line items.
    2) Try to use text elements. Give the header information in one text element say T1 and the line items in another text element say T2. And then write WRITE_FORM for text element T2 in a loop to display the line items.
    Hope this will help you.

Maybe you are looking for