Error - Dispute Case Data Could Not Be Read

I got above error while creating the dispute case in production server.
Anyone have an idea how I fixed it, does it need to see RFC?
Please guide me
Krunal

Hi Mark,
Thanks, while I create one document for dispute case system is not able to read the document. It is in productive client. we have cluster specific transactions in one cluster we post documents and another cluster dispute cases create. so when I tried to create dispute case in main cluster with ref to document system gives me below error.
Normally we post transctions in G cluster and after posting in G we process dispute case in G cluster and after it open in E cluster for details about dispute case.
Using UDM_DISPUTE transction code for look into dispute cases in E cluster, here we canonot proceed from G to E, In G Cluster we find this error and because of this we unable to create dispute case in E cluster.
If you need more information, Please ask me.

Similar Messages

Error : "Backend data could not be read"....

Hi
We are having SRM 4.0 with backend R/3 4.7.
When shopping cart is approved, getting error message "Backend data could not be read".
In BBP_PD, status is showing "Error in Transmission"
Observed that BE_OBJECT_TYPE and BE_OBJECT_ID fields are blank in table BBP_PDBEI.
At the bottom of BBP_PD, in the alert section in Monitor field a message appeared as "Shopping Basket\Spooler Communication errors".
Is this error something related to RFC authorization?
Please tell me what is the reason.
Thanks and Regards
Jagadish

Hi Jagdish,
As you said, this may be related to RFC communication.
During the SC approval, SRM will determine the follow on doc type (RS, RQ, PO) depending on your customizing, the SC item data, and what R/3 let you create (after META_INTERPRETE_DAT).
Just after this step, the backend doc type & ID are stored in SC item backend references. But here your fields BE_OBJECT_TYPE and BE_OBJECT_ID fields are blank.
It makes me suppose that a backend communication error made this process failure.
If the RFC authorizations were not correct, then this would be the case for ALL your SC !!! I don't think this is the case.
Do you have lots of errors like this one ?
Maybe the backend was not available or overloaded at that time. Is this an error in production ? What are your volumetrics ?
Can you check in SM37 if you have some jobs named PO_JOB created at this time or scheduled since this date ?
Rgds
Christophe
PS: please reward points for helpful answers

Mac mini cannot open cd because data could not be read or written -

Mac mini (Mac OSX 10.6.8) cannot open cd/files because data could not be read or written. Error code -36. What is way to correct this problem? Thanks so much.

Try:
Apple Computers: Troubleshooting the slot-loading SuperDrive
Does it work with DVDs?
When is the last time it worked with CDs?
Have you tried cleaning/blowing out the drive?

When I try to save a form as "Reader Extended PDF" in Acrobat Pro, I get an error message "This document could not be reader enabled".

Hello,
When I try to save a form as “Reader Extended PDF” in Acrobat Pro, I get an error message “This document could not be reader enabled”.
The steps I’m following are described below:
1. Insert electronic signatures
- In Tasks, click on “Add New Field -> Digital Signature”.
- Move the square to the place where you want to put the signature and click.
- Fill in the “field name” with the name of the person who has to sign here.
- When it is done, click anywhere on the screen.
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
2. Save the Form
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
I am using Adobe Acrobat Pro 10.0.0 on a W7 workstation
Here's a screenshot of the problem.
Thanks a lot.
Gael

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

Error; publication terminated = Content Could not be Read

Hello All,
It is getting insanely painful. We are replicating our catalog. which is massive 10000 products, 8000 images tons of attributes etc. the project is CRM 2007 Web Channel and we are using TREX 7.1. I am getting the below error
Error; publication terminated => Content Could not be Read
Message no. COM_PCAT_IMS852
We checked all the timeout paarameters for both FTP and HTTP and set it to unlimited.
please help

pounce???
Grrrrr
The Long Text for your error COM_PCAT_IMS852 is given below You might have already seen it. It appears that the load (FTP or HTTP) aborted and it is very likely there is an ABAP dump ( ST22 ) or at least a log entry ( SM21 ?).
You can find the document class (TIF , GIF, JPG) etc you set for the document type.
SAP Web Application Server -> Application Server -> Basis Services -> ArchiveLink -> Basic Customizing -> Edit Document Types
For every document type there can be only one document class right? So, I am not sure if you are mixing the document classes for a document type.
Easwar Ram
http://www.parxlns.com
Long text
Diagnosis
No link to the HTTP Server could be created.
System response
No connection could be made with the HTTP server selected by the publishing computer ID. The replication process is stopped, since the requested transport of documents cannot be executed.
Procedure
=> ACCESS_DENIED
Check whether you have read and write authorizations for the document directories
=> OBJECT_NOT_FOUND
Check whether the HTTP process is correctly configured onto the HTTP server (usually the Web server of your Internet Sales application).
Check whether the settings of the publishing computer ID are the same as the settings of the HTTP server.
=> 1/'ERROR NIECONN_REFUSED
Check the RFC destination SAPHTTPA. Application server must be chosen at 'Start'.
=> 4/
The HTTP client program showed an unspecific TCP/IP error.
=> all other values zero or empty.
Check whether the RFC connection is correctly set. The RFC destination to be checked is SAPHTTPA.
Procedure for System Administration

Error Code -36 Some data could not be read or written.

When trying to copy some files from external firewire drives I am getting errors that say "The Finder cannot complete the operation because some data in "LatestCollection.mov" could not be read or written (Error code -36).
I have some Lacie 250G Extreme drives that are not having a problem, but I've now tried THREE different Lacie Pocket Drives and they all come up with this error when I've tried copying files that are of all different kinds, for Quicktime files to Quark files to a disk image.... I've tried hooking up to different firewire ports, I've tried three different firewire cords, same problem. BUT, I am able to copy some files without a problem... Just various random files won't copy because of this error. ALSO, I've used these drives on other computers and been able to copy the exact same files off without any problem.
Not knowing what to do, I repaired the disk permissions on my main drive. That did nothing.
I've combed the support discussions and come up with nothing that sounds exactly like this.
Anyone have ANY idea??

Well, Apple Care solved my issue. I'm posting for anyone else that may encounter this problem... perhaps this'll help you because I didn't find any answers in the Discussions...
They had me unplug everything from my computer. EVERYTHING, including power cord. They had me wait at least 2 minutes. We then zapped the PRAM by holding down the Opt + Cmd + P + R keys until after the third gong.
Then they told me to plug back in just the keyboard, mouse and monitor and start up. Once up they had me run Disk Utilities and repair the disk permissions for the hard drive.
All fixed.
I had repaired the disk permissions multiple times, but the key step apparently was the unplugging everything and waiting... apparently that resets some part of the computer when you do that.
Best of luck,
Rolyn

Error: File just captured could not be read and was deleted after capture.

I was just recording an extremely important interview. I have recorded literally 10.000 recordings before with the same setup, every day, over a period of some three years now. I'm recorging DV PAL through SDI input on a AJA KONA LS card.
It seemed to be going well last night while recording but as soon as I pressed 'Esc' to end the capture I got an error message saying (not exactly in these words) : Error: The file just captured could not be read.
The file couldn't be found anywhere on the HD or in the trash. Usually when something goes wrong during capture, you can find the file in the capture folder named 'filename-av'. Not this time, I have never seen this error message before.
The person being interviewed was absolutely furious and said he would not do the interview again. So I'm up against the wall here, and need to recover the files.
What's more, the problem still persists. When I try capturing again, as soon as I stop the same error occurs. So now my FCP is not capturing anymore
I tried running Data Rescue 3.1 and found the recording in deleted files, but:
1. the recording is in several parts (not sure if it's all there, but probably most of it)
2. Data Rescue 3 interprets the files as .dv files, as opposed to .mov files as all my other recorded material.
3. THERE IS NO AUDIO IN THE .DV FILES, which pretty much nullifies the file recovery altogether.
I tried googling this error, but it did not help much:
1. None of the people were capturing the same way I do (most were capturing from tape, none straight through KONA SDI input)
2. There was no solution to prevent the error.
3. No solution to recover the files either.
I must say, this experience really taught me the essence of Murphy's law: 'Anything that can go wrong, will go wrong at the worst possible moment'
Any suggestions as to the reasons for this?
Any suggestions as to how the files can be recovered?

Good news!
I beleive I have found the cause and solution. At least now I am able to reproduce the problem at will and therefore, hopefully prevent it.
I discovered that there is nothing wrong with my AJA KONA setup, as I was able to capture with both QuickTime movie capture and Adobe Premier just fine. But every time I try capturing in FCP I get unreadable capture files (since 2 days ago).
Trying all possible capture settings, capture presets or easy setups did nothing. (although capturing thru Firewire still works every time).
I was about to give up when I noticed that where I usually have my video scopes window running, for convenience sake, under it the Voiceover utility was running.
So here is the deal: Usually when you try and capture with the Voiceover utility running, you can't. FCP wont allow you to capture, it will return an error message saying: 'Log and capture can not be opened while Voice Over is running. Please close Voice Over and try again.' As it turns out, this warning is probably for a good reason.
BUT...
If you shut down FCP with Voice Over running and start it up again THEN you CAN run Log and Capture at the same time... everything looks OK, until you stop the recordin, then you get an error message saying your recording is screwed.
I tried this over and over again, every time it behaves the same way. Shutting down with VO util>starting up again>recordings get screwed .. close VO utility>back to normal operation.
I'm not sure if it was the VO utility the last time this happened (few weeks back), but it might very well be. I might not have noticed that the VO utility was running as it was hidden behind the videoscopes and there are no warnings when running Log and Capture if you start up FCP with VO utility still running.
My educated guess to what is going on is that the VO utility is taking up priority over the sound inputs and by doing so making the audio of the capture unreadable. This theory is supported by the fact that when my data recovering experts found the recordings on the HD, there was no audio on the files, but the video was intact.
The only reason setting up the AJA drivers helped in the past was probably because that flushed the FCP settings and in doing so closed the VO utility window. How very ironic
Hope this helps someone out there. And I hope Apple find a way to prevent this from happening.
cheers!
Vidar F.

"Unknown Error" (-50) The disk could not be read from or written to

My iPod Nano syncs fine, but I have never been able to change a setting without getting the above error dialogs
("Unknown Error (-50)" and "The disk could not be read from or written to")
Does anyone know what's up?

So, it's not so much that you're getting a -50 error. It's that you're having problems with the iPod because it can't be properly restored. Let's get the log from iTunes trying to restore the iPod and send it to those lazy Apple engineers.
To get the iPod restore log:
1. Quit iTunes.
2. Relaunch iTunes.
3. Try the restore. See failure (1418) then grab the newest file in the folder:
C:\Documents and Settings\yourusername\Application Data\Apple Computer\iTunes\iPod Updater Logs
(There's a new one created every time you run iTunes which is why I want you to quit and relaunch iTunes.)
You need to send that file to our buddy Roy. Make sure that you include:
(1) the drwtsn32.log file.
(2) the link to this thread.
(3) a one line description of your problem, i.e. "-1418 error when restoring iPod".
(4) the username that you're using here in the discussion boards.
(5) tell him Toonz sent ya.
Roy is getting a little swamped with messages and needs to make sure he gets all the information. And if he doesn't get that information, the message is just going to get dropped on the floor.

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

Wfmlrgsm.exe error. The memory could not be read.

Dear experts,
I have this Installation:
Oracle apps 11 on Windows XP Pro. Visual C++, cygwin.
After I bring up the database listener, and Apache Server,
I then start the service,
OracleConcMgrTEST
which is:
C:\oapps11\testappl\fnd\11.5.0\bin\CCMSVC.exe TEST
But I keep getting a pop up error window:
Wfmlrgsm.exe – Application Error
The instruction at "7C911F52" referenced memory at "4543414F". The memory could not be "read".
Click ok to terminate
Click on Cancel to debug the program.
The file is:
$ find . -type f 2>/dev/null | grep -i "Wfmlrgsm.exe"
/cygdrive/c/oapps11/testappl/fnd/11.5.0/bin/WFMLRGSM.exe
When I have pressed cancel to debug, it brings up Visual C++ debugger.
I see:
7C911F22 E8 2C BA 04 00 E9 29 F0 FF FF 0F B7 C0 50 56 E8 è,º..é)ðÿÿ.·ÀPVè
7C911F32 CB 00 00 00 E9 34 65 00 00 3B 5F 14 0F 87 3B 83 Ë...é4e..;_..‡;ƒ
7C911F42 03 00 E9 72 97 00 00 8B 70 04 83 EE 08 89 75 C8 ..ér—..‹p.ƒî.‰uÈ
7C911F52 8A 46 05 88 45 E3 8D 4E 08 8B 39 89 BD 48 FE FF ŠF..Eã.N.‹9‰½Hþÿ
7C911F62 FF 8B 56 0C 89 95 78 FF FF FF 8B 12 3B 57 04 0F ÿ‹V.‰•xÿÿÿ‹.;W..
7C911F72 85 F3 23 02 00 3B D1 0F 85 EB 23 02 00 8B 8D 78 …ó#..;Ñ.…ë#..‹.x
7C911F82 FF FF FF 89 39 89 4F 04 3B F9 75 2F 0F B7 0E 8B ÿÿÿ‰9‰O.;ùu/.·.‹
7C911F92 D1 C1 EA 03 89 95 40 FE FF FF 83 E1 07 33 FF 47 ÑÁê.‰•@þÿÿƒá.3ÿG
7C911FA2 D3 E7 89 BD 50 FF FF FF 8D BC 1A 58 01 00 00 33 Óç‰½Pÿÿÿ.¼.X...3
454340FF ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543410F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543411F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543412F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543413F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543414F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543415F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543416F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543417F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543418F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
4543419F ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
454341AF ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ????????????????
Call stack:
NTDLL! 7c911f52()
MSVCRT! 77c2c3c9()
MSVCRT! 77c2c3e7()
MSVCRT! 77c2c42e()
FNDCORE! 7aa6c96e()
FNDCORE! 7aa9ae36()
WFMLRGSM! 004011ea()
WFMLRGSM! 00401567()
WFMLRGSM! 0040411d()
KERNEL32! 7c816fd7()
I've also got this error when I:
Bring up the tutorial on making Oracle Forms.
Any ideas on how to make this error go away?
Thanks

Visual C++ Help, About, gives:
Visual C++ 6.0
BTW, Service Pack 3 that you mentioned in the other thread:
Re: Install of apps 11.5.8 on Windows - Problems with PreReqs
Is it the service pack for XP? Or, for C++?
Windows Event Viewer logs:
EvntAgnt
TraceFileName parameter not located in registry; Default trace file used is .
TraceLevel parameter not located in registry; Default trace level used is 32.
TraceFileName parameter not located in registry; Default trace file used is .
TraceLevel parameter not located in registry; Default trace level used is 32.
OracleFormsServer-Form
The description for Event ID ( 0 ) in Source ( OracleFormsServer-Forms60TEST ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: OracleFormsServer-Forms60TEST Started.
Here are the files I found:
OracleApps@green /cygdrive/c/oapps11
$ find . -type f | grep -i "adadmin"
./testappl/ad/11.5.0/bin/adadmin.exe
./testappl/ad/11.5.0/lib/adadmin.obj
./testappl/ad/11.5.0/res/adadmin.res
To relink, what do I do? Shut everything down, and run the exe?
Thanks a lot!

App Error "...memory could not be read."

DLACTRL.EXE Application Error
The instruction at "0xfd2a2ad0" referenced memory at "0xfd2a2ad0." The memory could not be "read." Click OK to terminate program.
Fresh install of Comm Suite with Captivate 3 -- today -- on a completely new never used before Dell computer running Windows XP Service Pack 3, 3.0 GB RAM
Only concurrent program running was IE browser
I see in other forums this happens a lot with Creative Suite programs. Captivate too?
I ran updates for Captivate and Windows XP after the "crash"
I saw one advisory to avoid recording IE so I am trying FireFox and so far so good but it's been only for a few minutes.
Question:
Why does this happen?
How can I stop it from happening?
Can damage can be done to my computer or other programs when this happens?
Thank you!

Here are 22 threads with a similar question:
http://search.java.sun.com/Search/java?col=javafrm&qp=%2Bforum%3A4&qt=%22NT+service%22&x=14&y=8
The first one refers to a commercial product that may or may not help.

Why do I get the Application Error jqsnotify.exe-Application Error. The memory could not be read?

Why do I get this error message every time i opened up Firefox saying: jqsnotify.exe-Application Error and then at the bottom line it says: The instruction at "0x5ff3d322"referenced memory at " 0xe41203c3". The memory could not be "read". Click on OK to terminate the program.
== This happened ==
Every time Firefox opened
== I recently renewed and installed the CA Security Suite and un-installed Firefox and re-installed it again.

System restore did it for me........!!!! It's gone and I don't miss it one bit.....!!!! May be one of those untraceable tricks that hackers use to irritate people.....Some security programs can identify these things ,but the perps usually use bogus addresses to send them anyway...Cyber criminals SUCK....<u>That is right ,I said that....</u> and they should be jailed and fined and suspended from internet usage all over the globe....
Reverend K.
CEO,FOUNDER,Site Editor,
http://WWW.CCCINTL.NET

RWRBE60.EXE - Application Error. The memory could not be "read" - URGENT !

Hi,
We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in some of the machines. That too, this error is encountered only some times and not always.
Scenario: The report builder generates a .RTF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.25.0.
This error is encountered only in some machines but not always.
It's a critical release issue. Could any let us know the possible solution?
Thanks,
Monica

Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

Error -36 "The disk could not be read from or written to.

I am downloading Weeds on iTunes. And right before the season finale starts to download, I run out of disk space. So I erase some of it. I then go back and refresh the download and get this error. I am downloading it straight to the mac, not some external device. I am also downloading episodes of The Office and 30 Rock, and they are downloading as normal. Thanks for your help,

i appreciate everyones help lol..
I have called apple 2000000000000 times... no help.
and i have emailed itunes support, with no response besides the automated "we recieved it" response

Copy files to iPod: Some data could not be read or written (-36)

I am trying to copy some of my Mac files to a folder on my iPod.
It seems to work fine for smaller files, but not for larger ones such as applications.
I get the -36 error message.
Anyone know what's wrong?
=================
UPDATE: Copying from CD-ROM via bad DVD-ROM drive.
Tried different drive, all okay now.
Sorry.

Well, Apple Care solved my issue. I'm posting for anyone else that may encounter this problem... perhaps this'll help you because I didn't find any answers in the Discussions...
They had me unplug everything from my computer. EVERYTHING, including power cord. They had me wait at least 2 minutes. We then zapped the PRAM by holding down the Opt + Cmd + P + R keys until after the third gong.
Then they told me to plug back in just the keyboard, mouse and monitor and start up. Once up they had me run Disk Utilities and repair the disk permissions for the hard drive.
All fixed.
I had repaired the disk permissions multiple times, but the key step apparently was the unplugging everything and waiting... apparently that resets some part of the computer when you do that.
Best of luck,
Rolyn

Error - Dispute Case Data Could Not Be Read

Similar Messages

Maybe you are looking for